Business Rule Security not refreshing?

I have a business rule project that contained a bunch of rules and have a user that is part of a group that was granted launch access to that project. If I remove a rule from the project, in theory that user should no longer see that rule in Planning but that's not happening. The user still sees all the rules including the ones that used to be in the project but have since been removed.

1) I've verified that the sec. group that the user belongs to is only provisioned with business rule "basic user". Also verified that the rule that was taken out of the project does not contain any access previlges of it's own
2) No overlapping projects
3) Have already tried refresh security from SS, migrate users in HBR, Planning migrate\refresh with no luck
It seems like some sort of refresh disconnect because like I said, user can still see rules that don't have any rule level access previlge assigned but did at one point exist in a project that did enable access via project level access. Once I took the rule out of the project, security to it should have gone away.
Thanks

Similar Messages

  • Business Rules Do Not Execute When Saving a Form

    When saving a form the attached business rules are not executing. Sometimes we are unable to validate business rules via AAS. When this happens we do a security refresh from Planning to Essbase and Essbase to Shared Services. At other times, we bounce planning and even Essbase and this seems to fix the problem. Today we have tried every combination (bounce planning, Essbase, AAS) and we are able to at least validate biz rules in AAS but we (i.e., users) are uanble to execute the biz rule when they save via the planning form. There are no issues running the biz rules when saving the form using an administration account. Can someone explain what's going on or provide direction as to why this problem happens and how to fix this issue?

    Hi,
    Well is your version 9.3.0.1? If yes then you have my sympathies :). We too have this version and face similar problems with Business Rules. Usually things come back to normal after following the steps mentioned above. However what I would want to know is the following:
    1) From where are you running the Business rules? I am asking this because if you are trying to run from Smartview then I would suggest you look at the time it takes for the Business Rules to execute. If it excedes the timeout settings then it will exit out. However the BR might still be running in the back ground. This you can confirm by looking at the data.
    2) Have you checked if you have installed all the patches?
    Hope it helps.
    Regards,
    Amol

  • Business Rules will not launch or open in EAS or Planning

    The Business Rules will not open or launch in EAS.  Additionally, they do not show up in Planning at all.  The error received is "Exception occurred. Please check your log file for details."  As of Friday, everything was working fine. On Monday morning the issue started.  The only thing that occurred over the weekend was the weekly stop & start of all services.
    Addiitonal Info:
    Version 9.3.1
    Can create new rules, but after saved, cannot launch or re-open
    Can view the business rules in EAS, cannot open, launch, or validate
    Cannot view any business rules in Planning
    Have already tried stopping and starting all services
    Have already tried different ids.
    When reviewing the error log I could find it says the following:
    AJPRequestHandler-HTTPThreadGroup-6 com.hyperion.hbr.security.HbrSecurityAPI -
    Error Code: -1
    com.hyperion.css.CSSCommunicationException: Unable to communicate with the server. Error Code: 3
    NestedException:
    com.hyperion.css.CSSCommunicationException: Failed to connect to the directory server. Error Code: 3
    NestedException:
    javax.naming.CommunicationException: USRTPD201P:389 [Root exception is java.net.ConnectException: Connection refused: connect]
    at com.hyperion.css.spi.impl.msad.JNDIHelper.getURLContext(Unknown Source)
    at com.hyperion.css.spi.impl.msad.JNDIHelper.getURLContext(Unknown Source)
    at com.hyperion.css.spi.impl.msad.MSADProvider.getUserByIdentity(Unknown Source)
    at com.hyperion.css.CSSAPIImpl.getUserByIdentity(Unknown Source)
    at com.hyperion.css.spi.impl.nv.NativeProvider.getUserById(Unknown Source)
    at com.hyperion.css.spi.impl.nv.NativeProvider.getUserByIdentity(Unknown Source)
    at com.hyperion.css.spi.impl.nv.NativeProvider.getIndirectRolesListForEntries(Unknown Source)
    at com.hyperion.css.spi.impl.nv.NativeProvider.getRolesListForEntries(Unknown Source)
    at com.hyperion.css.spi.impl.nv.NativeProvider.getRolesListForEntry(Unknown Source)
    at com.hyperion.hbr.security.HbrSecurityAPIHelper.getMergedCSSentriesArray(Unknown Source)
    at com.hyperion.hbr.security.HbrSecurityAPIHelper.updateAllHashes(Unknown Source)
    at com.hyperion.hbr.security.HbrSecurityAPI.getGroupsHash(Unknown Source)
    at com.hyperion.hbr.db.DBGroups.getGroupsForGroup(Unknown Source)
    at com.hyperion.hbr.core.GroupManagerServer.getGroupsForGroup(Unknown Source)
    at com.hyperion.hbr.core.AccessControlManagerServer.getInheritedObjects(Unknown Source)
    at com.hyperion.hbr.core.AccessControlManagerServer.getUserAccessibleObjects(Unknown Source)
    at com.hyperion.hbr.core.AccessHash.getCurrentAccess(Unknown Source)
    at com.hyperion.hbr.core.AccessHash.canLaunch(Unknown Source)
    at com.hyperion.hbr.core.AccessControlManagerServer.canLaunch(Unknown Source)
    at com.hyperion.hbr.core.AccessControlManagerServer.validateLaunchLocations(Unknown Source)
    at com.hyperion.hbr.core.AccessControlCmdListener.validateLaunchLocations(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at com.essbase.eas.framework.server.application.AbstractCommandListener.handleEvent(Unknown Source)
    at com.essbase.eas.framework.server.application.DefaultCommandDispatcher.dispatchEvent(Unknown Source)
    at com.essbase.eas.framework.server.application.DefaultEventController.handleEvent(Unknown Source)
    at com.essbase.eas.framework.server.application.EventDispatcherWorkListener.handleEvent(Unknown Source)
    at com.essbase.eas.framework.server.application.DefaultWorkDispatcher.dispatchEvent(Unknown Source)
    at com.essbase.eas.framework.server.application.DefaultEventController.handleEvent(Unknown Source)
    at com.essbase.eas.framework.server.application.DefaultApplication.generateWorkEvent(Unknown Source)
    at com.essbase.eas.framework.server.application.DefaultServlet.handleRequest(Unknown Source)
    at com.essbase.eas.server.AppManServlet.doPost(Unknown Source)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:711)
    at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
    at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
    at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
    at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
    at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
    at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
    at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
    at java.lang.Thread.run(Thread.java:595)
    Nested Exception:
    Error Code: -1
    com.hyperion.css.CSSCommunicationException: Failed to connect to the directory server. Error Code: 3
    NestedException:
    javax.naming.CommunicationException: USRTPD201P:389 [Root exception is java.net.ConnectException: Connection refused: connect]
    at com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.getBorrowObject(Unknown Source)
    at com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.borrowValidatedConnection(Unknown Source)
    at com.hyperion.css.spi.impl.msad.JNDIHelper.getURLContext(Unknown Source)
    at com.hyperion.css.spi.impl.msad.JNDIHelper.getURLContext(Unknown Source)
    at com.hyperion.css.spi.impl.msad.MSADProvider.getUserByIdentity(Unknown Source)
    at com.hyperion.css.CSSAPIImpl.getUserByIdentity(Unknown Source)
    at com.hyperion.css.spi.impl.nv.NativeProvider.getUserById(Unknown Source)
    at com.hyperion.css.spi.impl.nv.NativeProvider.getUserByIdentity(Unknown Source)
    at com.hyperion.css.spi.impl.nv.NativeProvider.getIndirectRolesListForEntries(Unknown Source)
    at com.hyperion.css.spi.impl.nv.NativeProvider.getRolesListForEntries(Unknown Source)
    at com.hyperion.css.spi.impl.nv.NativeProvider.getRolesListForEntry(Unknown Source)
    at com.hyperion.hbr.security.HbrSecurityAPIHelper.getMergedCSSentriesArray(Unknown Source)
    at com.hyperion.hbr.security.HbrSecurityAPIHelper.updateAllHashes(Unknown Source)
    at com.hyperion.hbr.security.HbrSecurityAPI.getGroupsHash(Unknown Source)
    at com.hyperion.hbr.db.DBGroups.getGroupsForGroup(Unknown Source)
    at com.hyperion.hbr.core.GroupManagerServer.getGroupsForGroup(Unknown Source)
    at com.hyperion.hbr.core.AccessControlManagerServer.getInheritedObjects(Unknown Source)
    at com.hyperion.hbr.core.AccessControlManagerServer.getUserAccessibleObjects(Unknown Source)
    at com.hyperion.hbr.core.AccessHash.getCurrentAccess(Unknown Source)
    at com.hyperion.hbr.core.AccessHash.canLaunch(Unknown Source)
    at com.hyperion.hbr.core.AccessControlManagerServer.canLaunch(Unknown Source)
    at com.hyperion.hbr.core.AccessControlManagerServer.validateLaunchLocations(Unknown Source)
    at com.hyperion.hbr.core.AccessControlCmdListener.validateLaunchLocations(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at com.essbase.eas.framework.server.application.AbstractCommandListener.handleEvent(Unknown Source)
    at com.essbase.eas.framework.server.application.DefaultCommandDispatcher.dispatchEvent(Unknown Source)
    at com.essbase.eas.framework.server.application.DefaultEventController.handleEvent(Unknown Source)
    at com.essbase.eas.framework.server.application.EventDispatcherWorkListener.handleEvent(Unknown Source)
    at com.essbase.eas.framework.server.application.DefaultWorkDispatcher.dispatchEvent(Unknown Source)
    at com.essbase.eas.framework.server.application.DefaultEventController.handleEvent(Unknown Source)
    at com.essbase.eas.framework.server.application.DefaultApplication.generateWorkEvent(Unknown Source)
    at com.essbase.eas.framework.server.application.DefaultServlet.handleRequest(Unknown Source)
    at com.essbase.eas.server.AppManServlet.doPost(Unknown Source)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:711)
    at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
    at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
    at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
    at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
    at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
    at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
    at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
    at java.lang.Thread.run(Thread.java:595)
    Nested Exception:
    javax.naming.CommunicationException: USRTPD201P:389 [Root exception is java.net.ConnectException: Connection refused: connect]
    at com.sun.jndi.ldap.Connection.<init>(Connection.java:204)
    at com.sun.jndi.ldap.LdapClient.<init>(LdapClient.java:118)
    at com.sun.jndi.ldap.LdapClient.getInstance(LdapClient.java:1578)
    at com.sun.jndi.ldap.LdapCtx.connect(LdapCtx.java:2596)
    at com.sun.jndi.ldap.LdapCtx.<init>(LdapCtx.java:283)
    at com.sun.jndi.ldap.LdapCtxFactory.getUsingURL(LdapCtxFactory.java:175)
    at com.sun.jndi.ldap.LdapCtxFactory.getUsingURLs(LdapCtxFactory.java:193)
    at com.sun.jndi.ldap.LdapCtxFactory.getLdapCtxInstance(LdapCtxFactory.java:136)
    at com.sun.jndi.ldap.LdapCtxFactory.getInitialContext(LdapCtxFactory.java:66)
    at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
    at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:247)
    at javax.naming.InitialContext.init(InitialContext.java:223)
    at javax.naming.ldap.InitialLdapContext.<init>(InitialLdapContext.java:134)
    at com.hyperion.css.spi.util.jndi.pool.CSSJNDIKeyedObjectFactory.init(Unknown Source)
    at com.hyperion.css.spi.util.jndi.pool.CSSJNDIKeyedObjectFactory.makeObject(Unknown Source)
    at org.apache.commons.pool.impl.GenericKeyedObjectPool.borrowObject(GenericKeyedObjectPool.java:792)
    at com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.getBorrowObject(Unknown Source)
    at com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.borrowValidatedConnection(Unknown Source)
    at com.hyperion.css.spi.impl.msad.JNDIHelper.getURLContext(Unknown Source)
    at com.hyperion.css.spi.impl.msad.JNDIHelper.getURLContext(Unknown Source)
    at com.hyperion.css.spi.impl.msad.MSADProvider.getUserByIdentity(Unknown Source)
    at com.hyperion.css.CSSAPIImpl.getUserByIdentity(Unknown Source)
    at com.hyperion.css.spi.impl.nv.NativeProvider.getUserById(Unknown Source)
    at com.hyperion.css.spi.impl.nv.NativeProvider.getUserByIdentity(Unknown Source)
    at com.hyperion.css.spi.impl.nv.NativeProvider.getIndirectRolesListForEntries(Unknown Source)
    at com.hyperion.css.spi.impl.nv.NativeProvider.getRolesListForEntries(Unknown Source)
    at com.hyperion.css.spi.impl.nv.NativeProvider.getRolesListForEntry(Unknown Source)
    at com.hyperion.hbr.security.HbrSecurityAPIHelper.getMergedCSSentriesArray(Unknown Source)
    at com.hyperion.hbr.security.HbrSecurityAPIHelper.updateAllHashes(Unknown Source)
    at com.hyperion.hbr.security.HbrSecurityAPI.getGroupsHash(Unknown Source)
    at com.hyperion.hbr.db.DBGroups.getGroupsForGroup(Unknown Source)
    at com.hyperion.hbr.core.GroupManagerServer.getGroupsForGroup(Unknown Source)
    at com.hyperion.hbr.core.AccessControlManagerServer.getInheritedObjects(Unknown Source)
    at com.hyperion.hbr.core.AccessControlManagerServer.getUserAccessibleObjects(Unknown Source)
    at com.hyperion.hbr.core.AccessHash.getCurrentAccess(Unknown Source)
    at com.hyperion.hbr.core.AccessHash.canLaunch(Unknown Source)
    at com.hyperion.hbr.core.AccessControlManagerServer.canLaunch(Unknown Source)
    at com.hyperion.hbr.core.AccessControlManagerServer.validateLaunchLocations(Unknown Source)
    at com.hyperion.hbr.core.AccessControlCmdListener.validateLaunchLocations(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at com.essbase.eas.framework.server.application.AbstractCommandListener.handleEvent(Unknown Source)
    at com.essbase.eas.framework.server.application.DefaultCommandDispatcher.dispatchEvent(Unknown Source)
    at com.essbase.eas.framework.server.application.DefaultEventController.handleEvent(Unknown Source)
    at com.essbase.eas.framework.server.application.EventDispatcherWorkListener.handleEvent(Unknown Source)
    at com.essbase.eas.framework.server.application.DefaultWorkDispatcher.dispatchEvent(Unknown Source)
    at com.essbase.eas.framework.server.application.DefaultEventController.handleEvent(Unknown Source)
    at com.essbase.eas.framework.server.application.DefaultApplication.generateWorkEvent(Unknown Source)
    at com.essbase.eas.framework.server.application.DefaultServlet.handleRequest(Unknown Source)
    at com.essbase.eas.server.AppManServlet.doPost(Unknown Source)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:711)
    at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
    at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
    at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
    at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
    at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
    at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
    at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
    at java.lang.Thread.run(Thread.java:595)
    Caused by: java.net.ConnectException: Connection refused: connect
    at java.net.PlainSocketImpl.socketConnect(Native Method)
    at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
    at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
    at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
    at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
    at java.net.Socket.connect(Socket.java:507)
    at java.net.Socket.connect(Socket.java:457)
    at java.net.Socket.<init>(Socket.java:365)
    at java.net.Socket.<init>(Socket.java:178)
    at com.sun.jndi.ldap.Connection.createSocket(Connection.java:346)
    at com.sun.jndi.ldap.Connection.<init>(Connection.java:181)
    ... 62 more

    I can view the rules in EAS, just cannot open or launch.  I am thinking it still has to do with the active directory that they changed, but need more time to research.  Here is the specific error now:
    2013-08-07 10:09:32,057 INFO AJPRequestHandler-HTTPThreadGroup-6 com.hyperion.hbr.security.HbrSecurityAPI - LDAP porvider could not be contacted.
    Error Code: -1
    com.hyperion.css.CSSCommunicationException: LDAP porvider could not be contacted. Error Code: 3
    NestedException:
    java.net.ConnectException: Connection refused: connect
    at com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
    at com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.init(Unknown Source)
    at com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.<init>(Unknown Source)
    at com.hyperion.css.spi.impl.msad.JNDIHelper.getURLContext(Unknown Source)
    at com.hyperion.css.spi.impl.msad.JNDIHelper.getURLContext(Unknown Source)
    at com.hyperion.css.spi.impl.msad.MSADProvider.getUserByIdentity(Unknown Source)
    at com.hyperion.css.CSSAPIImpl.getUserByIdentity(Unknown Source)
    at com.hyperion.css.spi.impl.nv.NativeProvider.getUserById(Unknown Source)
    at com.hyperion.css.spi.impl.nv.NativeProvider.getUserByIdentity(Unknown Source)
    at com.hyperion.css.spi.impl.nv.NativeProvider.getIndirectRolesListForEntries(Unknown Source)
    at com.hyperion.css.spi.impl.nv.NativeProvider.getRolesListForEntries(Unknown Source)
    at com.hyperion.css.spi.impl.nv.NativeProvider.getRolesListForEntry(Unknown Source)
    at com.hyperion.hbr.security.HbrSecurityAPIHelper.getMergedCSSentriesArray(Unknown Source)
    at com.hyperion.hbr.security.HbrSecurityAPIHelper.updateAllHashes(Unknown Source)
    at com.hyperion.hbr.security.HbrSecurityAPI.getGroupsHash(Unknown Source)
    at com.hyperion.hbr.db.DBGroups.getGroupsForGroup(Unknown Source)
    at com.hyperion.hbr.core.GroupManagerServer.getGroupsForGroup(Unknown Source)
    at com.hyperion.hbr.core.AccessControlManagerServer.getInheritedObjects(Unknown Source)
    at com.hyperion.hbr.core.AccessControlManagerServer.getUserAccessibleObjects(Unknown Source)
    at com.hyperion.hbr.core.AccessHash.getCurrentAccess(Unknown Source)
    at com.hyperion.hbr.core.AccessHash.canLaunch(Unknown Source)
    at com.hyperion.hbr.core.AccessControlManagerServer.canLaunch(Unknown Source)
    at com.hyperion.hbr.core.AccessControlManagerServer.validateLaunchLocations(Unknown Source)
    at com.hyperion.hbr.core.AccessControlCmdListener.validateLaunchLocations(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at com.essbase.eas.framework.server.application.AbstractCommandListener.handleEvent(Unknown Source)
    at com.essbase.eas.framework.server.application.DefaultCommandDispatcher.dispatchEvent(Unknown Source)
    at com.essbase.eas.framework.server.application.DefaultEventController.handleEvent(Unknown Source)
    at com.essbase.eas.framework.server.application.EventDispatcherWorkListener.handleEvent(Unknown Source)
    at com.essbase.eas.framework.server.application.DefaultWorkDispatcher.dispatchEvent(Unknown Source)
    at com.essbase.eas.framework.server.application.DefaultEventController.handleEvent(Unknown Source)
    at com.essbase.eas.framework.server.application.DefaultApplication.generateWorkEvent(Unknown Source)
    at com.essbase.eas.framework.server.application.DefaultServlet.handleRequest(Unknown Source)
    at com.essbase.eas.server.AppManServlet.doPost(Unknown Source)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:711)
    at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
    at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
    at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
    at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
    at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
    at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
    at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
    at java.lang.Thread.run(Thread.java:595)
    Nested Exception:
    java.net.ConnectException: Connection refused: connect
    at java.net.PlainSocketImpl.socketConnect(Native Method)
    at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
    at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
    at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
    at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
    at java.net.Socket.connect(Socket.java:507)
    at com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.validateSocketConnection(Unknown Source)
    at com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.init(Unknown Source)
    at com.hyperion.css.spi.util.jndi.pool.JNDIConnectionPool.<init>(Unknown Source)
    at com.hyperion.css.spi.impl.msad.JNDIHelper.getURLContext(Unknown Source)
    at com.hyperion.css.spi.impl.msad.JNDIHelper.getURLContext(Unknown Source)
    at com.hyperion.css.spi.impl.msad.MSADProvider.getUserByIdentity(Unknown Source)
    at com.hyperion.css.CSSAPIImpl.getUserByIdentity(Unknown Source)
    at com.hyperion.css.spi.impl.nv.NativeProvider.getUserById(Unknown Source)
    at com.hyperion.css.spi.impl.nv.NativeProvider.getUserByIdentity(Unknown Source)
    at com.hyperion.css.spi.impl.nv.NativeProvider.getIndirectRolesListForEntries(Unknown Source)
    at com.hyperion.css.spi.impl.nv.NativeProvider.getRolesListForEntries(Unknown Source)
    at com.hyperion.css.spi.impl.nv.NativeProvider.getRolesListForEntry(Unknown Source)
    at com.hyperion.hbr.security.HbrSecurityAPIHelper.getMergedCSSentriesArray(Unknown Source)
    at com.hyperion.hbr.security.HbrSecurityAPIHelper.updateAllHashes(Unknown Source)
    at com.hyperion.hbr.security.HbrSecurityAPI.getGroupsHash(Unknown Source)
    at com.hyperion.hbr.db.DBGroups.getGroupsForGroup(Unknown Source)
    at com.hyperion.hbr.core.GroupManagerServer.getGroupsForGroup(Unknown Source)
    at com.hyperion.hbr.core.AccessControlManagerServer.getInheritedObjects(Unknown Source)
    at com.hyperion.hbr.core.AccessControlManagerServer.getUserAccessibleObjects(Unknown Source)
    at com.hyperion.hbr.core.AccessHash.getCurrentAccess(Unknown Source)
    at com.hyperion.hbr.core.AccessHash.canLaunch(Unknown Source)
    at com.hyperion.hbr.core.AccessControlManagerServer.canLaunch(Unknown Source)
    at com.hyperion.hbr.core.AccessControlManagerServer.validateLaunchLocations(Unknown Source)
    at com.hyperion.hbr.core.AccessControlCmdListener.validateLaunchLocations(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at com.essbase.eas.framework.server.application.AbstractCommandListener.handleEvent(Unknown Source)
    at com.essbase.eas.framework.server.application.DefaultCommandDispatcher.dispatchEvent(Unknown Source)
    at com.essbase.eas.framework.server.application.DefaultEventController.handleEvent(Unknown Source)
    at com.essbase.eas.framework.server.application.EventDispatcherWorkListener.handleEvent(Unknown Source)
    at com.essbase.eas.framework.server.application.DefaultWorkDispatcher.dispatchEvent(Unknown Source)
    at com.essbase.eas.framework.server.application.DefaultEventController.handleEvent(Unknown Source)
    at com.essbase.eas.framework.server.application.DefaultApplication.generateWorkEvent(Unknown Source)
    at com.essbase.eas.framework.server.application.DefaultServlet.handleRequest(Unknown Source)
    at com.essbase.eas.server.AppManServlet.doPost(Unknown Source)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:711)
    at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
    at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
    at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
    at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
    at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
    at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
    at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
    at java.lang.Thread.run(Thread.java:595)

  • Business rule provision not reflecting in planning

    Hi,
    We are using Calc manager + classic planning app(11.1.2.1).Following are the steps I have performed.
    1. Assigned 'basic' role for business rules to a group in shared services.
    2. In planning-->admin --> business rule security, i assigned launch access for this group to a folder containing several business rules.
    3. When i open up planning, I am unable to see the business rules associated with the forms. so it doesnt run on save.
    Btw, I refreshed security as well. Am i missing something.??
    Regards,
    N

    But we are using calculation manager. I created a new id and assigned all the groups that an existing user has. When i login with the new id, I can see the business rules, but the existing users cannot see them.
    Please help..

  • Business Rules Security based on work flow

    Hello,
    How can we enable security on Business Rules, based on the workflow,
    for example,
    we have Business rule, that is attached to one input form, which opens a window for entering run time prompts for entering
    new asset details, and after entering he saves and the planning unit is promoted to next level,
    but on the input form, the Business rule is still visible, where by he can enter the the details though the planning unit is promoted,
    Is there any way that makes the Business rule access disables/hides as the planning unit is promoted?
    Thanks,
    murali.

    There is currently no out-of-the-box integration between workflow and business rule security.
    This thread may help with some alternatives:
    Workflow Problem
    - Jake

  • Business Rule Export Not Complete

    I have a situation where I am exporting business rules and the codeblock of a few business rules are not included. If I look at the XML, the business rule is there, the name,description, ect, but the node that should have the actual code is either empty or not there. Has anybody experienced this before? We have cycled the services to clean the cache. There aren't any special characters that I would expect to break the xml. We don't get any errors during the export. Anybody ever had this issue?

    Try the following
    Option 1
    EAS console provide the functionality to migrate (rather than export to file) a repository from a source environment to a target environment by direct RDBMS connection.
    Refer to page 97 of the HBR administrator guide:
    http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/hbradmin.pdf
    Option 2
    Increase the heap size of the EAS console via the "admincon.lax" file found under Hyperion\AnalyticAdministrationServices\console\bin
    The parameter to change is: "-Xmx256M" in the "LAX.NL.JAVA.LAUNCHER.MAIN.METHOD" section of the file.
    You can increase it to a maximum of "-Xmx1024M"
    Hope this helps.
    Cheers
    -Manoj

  • Business Rules or Form Refresh timeout - SmartView

    Hi,
    We have users using Smartview which get the following error: "The request timed out. Contact your admistrator ro increase netRetryCount and netRetryInterval." It appear that everytime a user execute a business rule or refresh a form, if the business rule or the form takes more than a minute to complete, the user will get the timeout error. If it is only few seconds to run, then the user will not get the timeout error.
    We use Hyperion Planning 9.2.0. Is this something to do with the setting in HBRServer.properties? We have the following settings at this moment:
    HBR.maxconn=20
    HBR.timeout=30000
    HBR.catalog=HYPSVR01
    #embedded server timeout in minutes
    #HBR.embedded_timeout=10
    #HBR.css_refresh=30
    HBR_APP_NAME=orclrddb01
    PLUGIN_DATA_REFRESH_RATE=30000
    ====
    Could anyone advise the meaning of the above entries or where can I get the information about the entries?
    Do we need to use: HBR.embedded_timeout or HBR_DB_CONNECTION_TIMEOUT setting?
    Thanks for your help.
    Regards,
    Lian

    Hi John,
    Thanks for the reply.
    As advised by Hyperion, we add :8300 (port number)
    into the smartview connection string, this appear to have solve the problem, e.g.
    http://planningserver.servername.com:8300/HyperionPlanning/SmartView

  • Business rules do not show up in forms

    We are using EPM 11.1.2.0. Recently, we have noticed that any new business rules we have created and associated with certain forms-do not show up in the forms.
    We have verified security, location etc for the rules. Somehow they don't show up at all.(even admin cannot see it in workspace).
    But they still exist if we look at rules in eas console.
    Anybody had similar issues?
    Edited by: 784749 on Nov 22, 2011 7:24 AM

    We recently had a somewhat similar issue. We opened our Workforce planning app to the users. Even though we turned on business rules on EAS and admin was able to see the rules on forms, the users did not. Restarting Planning services solved the issue.
    Cheers,
    Mehmet

  • Business rules security in task lists

    Hi experts,
    I have question regarding security in business rules, the problem is that we have, lets say, 10 users who have all access to a tasklist, but not all of them have access to the same forms / business rules. The ideal would be that if a user has no access to a form, it doesnt show in the tasklist, but he gets to see the form in the tasklist and when he opens it he receives an error message. We can get the user to accept that. But with business rules, the case is different: when a user clicks on a business rule on the tasklist he has no access to, instead of receiving a message denying access, he gets a screen with all the business rules he does have access to, and checkboxes to select the plan type the BR will run on, which is unacceptable and confusing. There are many users and creating custom tasklist for each one of them would be too hard to mantain. Is there a way to achieve a better solution for the user? Thanks in advance for your comments.

    Hi,
    I don't think of any other way.
    The user have access to task list so it will show all tasks, and if the user don't have access to any particular web form it will throw an error informing same only once user open the web form.
    For Business Rule it will show all rule/calc scripts for which user have access too, if the user don't have access to rule attached to that task.
    I had same requirement and then after trying for some time, we provided education about the same to the users.
    Regards,
    -SM

  • Business Rules security issue

    We have been unable to access the business rules in out QC environment for a while. When you try to expand on them in EAS we get the error
    Error logging in to Business Rules. The repository has not been configured or you are not authorized to use Business Rules.
    Our dba recently upgraded the SQL server to a new machine and thought everything was ok. I just noticed in Shared Services that it still shows the old SQL server name in there. So how do we point it to the new SQL server?

    I thought that would take care of it but we got this error:
    (Apr 26, 2010, 03:26:33 PM), org.apache.commons.httpclient.Wire, DEBUG, << "Product already exists.Registeration failed: error.generalSaveModel."
    (Apr 26, 2010, 03:26:33 PM), com.hyperion.ess.EASDBConfigurator, DEBUG, Exception generated
    com.hyperion.interop.lib.OperationFailedException: Product already exists.Registeration failed: error.generalSaveModel.Product already exists.Registeration failed: error.generalSaveModel.
    at com.hyperion.interop.lib.helper.RegistrationHelper.register(Unknown Source)
    at com.hyperion.interop.lib.CMSClient.register(Unknown Source)
    at com.hyperion.ess.EASDBConfigurator.registerHBRPropFile(EASDBConfigurator.java:317)
    at com.hyperion.ess.EASDBConfigurator.configure(EASDBConfigurator.java:229)
    at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeDBConfigTask(RunAllTasksWizardAction.java:282)
    at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:151)
    at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
    (Apr 26, 2010, 03:26:33 PM), com.hyperion.ess.EASDBConfigurator, DEBUG, com.hyperion.cis.config.ProcessingException
    (Apr 26, 2010, 03:26:33 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
    com.hyperion.cis.config.ProcessingException
    at com.hyperion.ess.EASDBConfigurator.configure(EASDBConfigurator.java:252)
    at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeDBConfigTask(RunAllTasksWizardAction.java:282)
    at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:151)
    at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
    Did we run it incorrectly?

  • Business rule trigger not calling the procedure in my code

    Good morning every one,
    I have a small problem with two of my business rule triggers.
    I have these tables:
    pms_activity
    csh_cash
    csh_integrate_leh
    csh_integrate_led
    and my process goes like this:
    upon approval of a row in my pms_activity table I have a trigger that insert a row in my csh_cash - and in the csh_cash table I have a trigger that will insert in the csh_ingerate_leh and csh_integrate_led.
    my problem is pms_activity does generate a row in csh_cash but the trigger in the cash does not fire to generate a row in the csh_integrate_leh and led tables.
    I have generated in the following order after I created my business rule:
    I have generated the table from the designer (server module tab)
    I have generated the CAPI from the head start utility
    I have generated the API from the designer
    I have generated the CAPI from the designer
    I have run the recompil.sql
    I have checked that my business rule trigger is enabled and should run on insert and no where restriction
    === this is my business rule logic ======
    l_rule_ok boolean := true;
    begin
    trace('br_csh001_cev (f)');
    csh_gl_pkg.csh_gen_integ_jvs(p_id
    ,p_ref_num
    ,p_own_id
    ,p_trt_id
    ,p_value_date
    ,p_description
    ,p_amount
    ,p_cur_id
    ,p_gla_dr
    ,p_gla_cr
    ,p_gla_pl
    ,p_gla_rev
    ,p_gla_eqt);
    return l_rule_ok;
    exception
    when others
    then
    qms$errors.unhandled_exception(PACKAGE_NAME||'.br_csh001_cev (f)');
    end br_csh001_cev;
    ==== end =======================
    Any help will be appreciated as I have struggled with this for two days.
    Thanks

    Haroon,
    SAP does not allow Stored Procedures to be used as part of the SAP Business Db or to be used to access SAP Business One tables directly for Insert, Update or Delete.  Any interaction with the SAP Business One Db is required to go through the SAP Business One API's, namely the DI and UI API's.
    Eddy

  • Business rules do not appear in Planning

    Hi,
    I've created 4 business rules, and assigned myself with Modify privileges, and "Launch and validate" privileges.
    Outline has been assigned and the rules validate fine as well.
    When login to planning and view the business rules under that plan type, it does not show the rules.
    Can anyone help with understanding what this prolem is related to?
    Thanks,
    Anindyo

    I assume that you assigned the business rule to the application location? If not, go into the business rule edit mode and check the Location tab. Make sure the application location is added. If it does not seamlessly appear in Planning, then log out then back into the Planning application for the rules to synch with Planning.

  • Business Rules are not imported in deployment process

    Dear friends:
    I am deploying a project. The project has 23 business rules.
    In the Oracle BPM Process Administrator,--> Projects --> In the column Business Rules --> Details , There are not one business rule imported which was created in Oracle BPM Studio.
    What is happening? Something is wrong in the deployment process?
    Or what is the correct way to write business rule for a project?
    I hope your answers.
    Best Regards,
    Danny

    Hi Danny,
    If you're using Oracle BPM Enterprise running on WebLogic you're ok. I know it's disconcerting, but your business rules were really created and deployed. It's a cosmetic bug that prevents them from being able to be viewed in the Process Administrator tool.
    Hope this helps,
    Dan

  • Business Rule Library not activated

    Hi, can anyone please tell me what drives the activation of Business Rule library?I am currently working on Consolidation of Investments and I have configured the dimension properties, application parameters as stated in 340.But my businessrules librray is not activated and hence I am not able to define the rules of consolidation.
    Edited by: 281642 on Aug 30, 2011 6:32 AM

    Hi,
    Which business rules have you selected?
    The business rules at the appset level are visible only if the automatic adjustment business rule is selected in your application.
    Hope this helps.

  • Unable to access Business Rules Facts after refreshing XML Facts

    I have created a business rule using an xml schema to generate the XML Facts. Then I created a Decision Function to call a Ruleset to process the information in the XML Facts. This decision function has input and ouput parameters from the XML Facts.
    The decision function is used inside a BPEL Process, by defining the Dictionary has the created business, defined the Service has de Decision Service. After this configuration I'm able to define the Input Facts and Output Facts from and to a variable in the bpel process. Using the Decision Fact Map window I define the input and output to the exposed Business Rule Facts. This works just fine. The BPEL runs and the Rules are correctly used.
    When I change my xml schema to add more elements and complex types I use the "Reload XML Facts From Updated Schemas" option available in the bussiness rule. After this operation I will no longer have access to the Bussiness Rule Facts in the Decision Fact Map window. So I'm no longer able to call the decision function.
    Yet the business rule has no problems and i have tested using a fuction to call the Decision Function.
    Is this a bug or a feature?
    I'm using Oracle 11g with the SOA Composite Editor 11.1.1.0.0.52.19.

    Problem solved. There was an element in the xml schema that had nillable = true. Because of this the XML Fact for that element would no longer be available in the BPEL Process. Removing the nillable and generating the XML Facts again solved the missing variable problem.

Maybe you are looking for

  • How to round numbers in java?

    hey everyone. just wondering how i can round my final answer which is "repayment" located on the last line to the nearest whole value. thanks :) this is my code: //Conversion and Calculation principle = reader.readDouble("Enter Loan Amount: "); inter

  • How to find out status of JMS Connection ( connected or closed )

    Is there a way to find out the status ( connected or closed ) of JMS Connection at any point of time . JMS Connection interface doesn't seem to have any isAlive( ) sort of method ? I'm using a shared instance JMS Connection and if someone calls conne

  • Whenever I select voicemail, it says the number is unavailable from my service. Please help?

    Whenever I call my voicemail or 101 to check voice messages, it rings until a voice says "the number I have called is unavailable from this service" and tells me to enquire something. Ringing other numbers and texting is working fine, except voicemai

  • Different Settlement Across Depreciation Areas

    Hello Experts. Does anyone know if the following is possible: - Within depreciation area XX I would like to capitalise to an AUC.  Costs may sit within the AUC for a long period of time (up to 2 years) without depreciation. - Within depreciation area

  • Moving objects into different tablespaces

    Hi Gurus, Here is my query . I have 40gb space to have dataset from production database. Test enviornment will be refreshed with production database. From testing enviornment development will be refreshed to aviod any connections to production. As pa