Business Rules not visible in Hyperion Planning

I created a group in Shared Services and added 6 (native) accounts.
After that, I assigned Access Privileges to Business Rules in AAS for this group.
When I open Planning Web and go to Tools - Business Rules, 5 of the 6 users can see the Business Rules,
but one users only sees the CalcScripts.
I think I tried everything; removed/added the account from the group, refreshing security, refresh in Planning-Desktop
I'm using version 9.2.03
Anyone knows whats going on here?

Thats the strange thing; We use (native) groups to provision. This works fine for the other 5 users.
But even if I provision this one user for the Business Rules, they remain invisible to this user. (in Planning)
I discovered this morning that this user can create a new BR, but when I try to open it in AAS console I get an error
"Exception occured, Please check your log file for details."
Unfortunately, the log doesn't provide any more details. (even if I set the level to Debug)

Similar Messages

Business Rules Not Visible in Planning.............

Hi All,
I have created business rules in Essbase & works well.But Those are not showed in planning App.Here , While i'm
creating Business Rules ,able to access for essbase only , when click on planning to shows unable login planning.
Plzzzzzzzz help out.......
Thanks

I am having the same problem with accessing business rules in version 9.3.1. I have been working with Oracle support for 5 months now trying to resolve this and they have not been able to help.
This application has been up and running for over a year before this behavior occurred. Previously users were able to view and run business rules. It is only affecting non-native authenticated users. The admin user and natively authenticated users can run/edit & vaidate rules. In order to run business rules all users have to log in with the admin user ID (not a good solution).
Any ideas, clues or new method of debugging this issue would be appreciated.
Thanks
John

Business rules not showing up in Planning

hi guys,
we qare in the development stage.
i logged in to planning application and could not see the business rules in the tools
.could some one help me out on this....very urgent

Hi,
One thing to check for is that hbrserver.properties exists in file structure under the planning web application, e.g.
\Hyperion\deployments\Tomcat5\HyperionPlanning\webapps\HyperionPlanning\WEB-INF\classes\HBRServer.properties
This example is for tomcat on 9.3.x
If the file doesn't exist there copy it from your AAS installation dir e.g. Hyperion\AnalyticAdministrationServices
Make sure you restart planning if you have to copy the file across
Cheers
John
http://john-goodwin.blogspot.com/

Hyperion Business Rules cannot connect to Hyperion Planning

I've deployed these applications into one machine server:
- Hyperion Essbase 7.1.3
- Hyperion Planning 4.0.1 (including Hyperion Business Rules)
- Essbase Administration Services 7.1.3
Everything runs well except that Hyperion Business Rules cannot connect to the Hyperion Planning as described in some error lines below:
Can not login to Planning Application because no token.
2009-10-07 15:12:15,125 WARN HttpProcessor[10090][1] com.hyperion.hbr.plugin.planning.PlanningMetadataAppElement - Error retrieving Essbase dbs from server: win
2003server1/myPlan app: {1}.
java.lang.Exception: Could not log in to Planning Server
at com.hyperion.hbr.plugin.planning.PlanningMetadataAppElement.getChildren(Unknown Source)
at com.hyperion.hbr.plugin.planning.PlanningMetadata.getChildren(Unknown Source)
at com.hyperion.hbr.core.MetadataCmdListener.getChildren(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
Anyone knows how to handle this error?
Mr. Goodwin?
Thanks in advance!
Adrian

Hi,
Have they ever worked ?
Have you followed the golden rule, start RMI, EAS, Planning, Log into planning application through the web, Open EAS, create bus rule, select outline of the planning application you logged in.
Also it is definitely checking out document ID 763345.1 in metalink3 (My Oracle Support)
Cheers
John
http://john-goodwin.blogspot.com/

Business Rules not visible sometimes-via web and smartview

We use EPM 11.1.2.
we have a unique problem-Business rules (associated with forms)sometimes fail to appear either via web or smartview for our users.After logging out and back in,sometimes they appear again.
If we explicitly 'disconnect all' from smartview, close Excel, and go back in again, then the rules are visible.
It is becoming hard to tell when the users can or cannot see the business rules.
All users have the right provisioning-interactive user.
Has anybody seen this kind of behavior before?
We had a similar issue a while back-with eas web versus eas desktop client. Oracle gave us a specific fix for the eas business rules problem.
Edited by: 784749 on Sep 26, 2011 11:59 AM

Thats the strange thing; We use (native) groups to provision. This works fine for the other 5 users.
But even if I provision this one user for the Business Rules, they remain invisible to this user. (in Planning)
I discovered this morning that this user can create a new BR, but when I try to open it in AAS console I get an error
"Exception occured, Please check your log file for details."
Unfortunately, the log doesn't provide any more details. (even if I set the level to Debug)

Error with Business Rules using Cmdline in Hyperion Planning 11.1.1.3

Dear all,
When I want to run an HBR, I have an error and I don't know where it does come from:
C:\Hyperion\products\Essbase\eas\console\bin>CmdLnLauncher -p:password.txt -S"DG
IWSXXX.ros.jc.org" -UIntegration -rRDG01_2 -fexp_file.xml
com.hyperion.hbr.excp.ExceptionAdapter: Error while sending command to HBR Serve
r running within the EAS server.
at com.hyperion.hbr.transport.HBRCommandRequestor.<init>(Unknown Source)
at com.hyperion.hbr.cmdlnlauncher.LaunchManager.connect(Unknown Source)
at com.hyperion.hbr.cmdlnlauncher.CmdLineLauncher.main(Unknown Source)
Detail:org.apache.xerces.dom.DocumentImpl.getXmlStandalone()Z
Error while sending command to HBR Server running within the EAS server.
2010-07-07 10:59:15,266 WARN main com.hyperion.hbr.cmdlnlauncher.CmdLineLauncher
- Error while sending command to HBR Server running within the EAS server.
Thank you for your help.
Jérémy

Hi Celvin,
Planning 11.1.2.3 is installed on a Linux box.
Moreover I couldn't find the folder names 'services' under the logs folder as mentioned by you.
C:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\services\HyS9EPMServer-sysout.log (if compact deployment)
C:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\services\HyS9Planning.log (if not compact)
Nothing has been captured in
C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs
But i see that the Dimensions 'Employee' and 'Job' have been added in the Dimension list, which should have been added once the workforce is initialized.
Regards,
Raj

Job status of Business Rules not reflecting correctly in Hyperion Planning

Hi,
In our Planning Web Application version 11.1.2.1 (Classic application), we have issue with the Business Rules not changing the job status from Processing to Complete.
Essentially giving an indication to users that the job is taking longer than expected.
Having noticed that behavior, when we cross check with Admin credentials (Application Logs ) HBR Launch.log. The End Time of the job is updated promptly.
We have couple of SRs Open with Oracle but they concluded it’s a bug and need to upgrade to 11.1.2.2. But currently we do not have any plans to upgrade to the latest version.
In order to force the Status change to mark it as Complete at the SQL Server backend.
We have to update the status table HYP_JOB_STATUS manually via database update.
But this is laborious process.
Did anyone encounter such issue? Please suggest a feasible option here ?
Thanks,
Venkat
Edited by: 947686 on Dec 18, 2012 6:21 AM

Hello Shiva,
We do not have any issue with calc rules; we are facing this issue with Business rules.
We have looked into the logs in both Applcation logs and Essbase logs nothing found strange except couple of .xcp files were generated in Essbase server. We have sent those .xcp files to Oracle for investigation. We have also noticed that Web Logic server was not hand shaking properly with Hyperion Server. Oracle responded with few application settings which we are already sycn with recommended settings.
We had the same issue in 8 months back and the same repeated now.
Thanks,
Venkat

Business Rule Not Deploying - Receiving Error Message

while trying to launch a business rule that I had updated this morning. This business rule is in the OH plan type. I was able to hit launch and even though I could see the calc running in EAS, I received this error
Rule was validated with no potential errors, the rule could not be validated against the deployed application as connection information could not be found.
looking for the assistance.
Thanks
Kiran.Kolli

If restarting the calc manager services does not help, increase the JDBC connection time-out.
1. Open CalcMgrConfig.properties present in calc-mgr deployment folder (WEB-INF\conf)
2. Increase the value of property 'DB.timeout' to 60000.
3. Remove the starting '#' for this property.
4. Re-start calc-mgr service.
HTH-
Jasmine.

MRS - Resources and demands are not visible in the Planning Board

Hi Friends - I am working on the the MRSS 610. We have installed it on the our ECC 6.0 as an add-on. We have configured the system as per the configuration guide.
But when I am accessing Manageru2019s Planning Board - /MRSS/PLBOMGR , using the Organization unit, I am getting Notification saying that the resources assigned to the Organization unit are not available in the MRS.
"Resource 00000000010000000000000000000000 not yet created in the WFM Core"
The details of the Error message
"Resource 00000000010000000000000000000000 not yet created in the WFM Core
Message no. /MRSS/SGE034
Diagnosis
Resource 00000000010000000000000000000000 has not yet been created in MRS.
System Response
No assignments have been created for resource 00000000010000000000000000000000, even though, according to the organizational model, this resource is to be taken into consideration in the planning board.
Procedure
Contact technical support.
Procedure for System Administration
Create the resource in question in MRS."
I have run the Report
/MRSS/HCM_RPTWFMIF : Transfers the HR data (availability times, qualifications and the resources itself) into the MRS Basis
But even after that I am not getting the resources in the planning board.
Also I am not able to view the Demands from PM/CS orders.
I have created PM Orders and
Assigned Work centres to the operations and
assigned the Resources to the Operations.
The HR assignment to the work center is also done.
I have tried T Code /MRSS/PLBOSRV - Enter the MRS planning board using a specified order
to pull the order demand. But it is not working
Its giving following message
1004280 is not a valid demand
Message no. /MRSS/SGU139
Diagnosis
The order does not exist in MRS.
This may be because:
The order number has an invalid format.
The order does not exist.
The order is not relevant for planning and has therefore not been transferred to MRS.
The order has been deleted from MRS.
Pls help me on this.
Thanks in advance and warm regards
Purnendu

Hi Anil/Saurabh - Thanks a lot for your replies.
I have checked the MRS configuration as per your suggestion.
It looks fine as per the configuration guide. I have done the PM/CS integration for Orders as demand.
But the Demands are not visible on the Planning Board.
I have checked in the debugging mode what is causing the problem - It looks like
"The Database Table: /mrss/d_dem_h needs entry"
But there are no entries in this table.
I could not find any Customizing transactions or Application transactions for maintaining this table. This is an Application Table for Master and Transaction Data and its Display and Maintenance allowed with Restriction.
I could not also find any transaction for transferring Demand from ECC(R/3) to MRS.
How do I maintain entries in this table?
How do I transfer Demand from ECC to MRS?
Saurabh - I have also been not able to transfer HR Resources from ECC to MRS.
We don't have WFM Core installed in our instance. But MRS should work fine without WFM. MRS Basis should take care of it.
To transfer Employee resources i have run the Program " /MRSS/HCM_RPTWFMIF". But when I execute the transaction with the selection parameters system shows that it is processing (Clock at the bottom Status bar) but it does not shows any result or status.
So I am not sure whether it is executing the program properly.
Pls help me resolve these issues.
Thanks and warm regards
Purnendu

Business Rules Not Validating

Hi I have a business rule that is not validating against thegiven database.I have tried copying the calculations into a calc script andthey validated and executed successfully. Can someone tell me whyis the business rule not validating the calculations?

Hello, if you would give the error message then we might help you better. The HBR are not at par with calc scripts. One thing that is different is that an nested IF statement should be on a sparse member block. In Calc scripts it does not matter which member from which dimension, in HBR it is important. Regards, Philip Hulsebosch www.Trexco.nl

Business Rules Only Visible in One of the Two Planning Webs

Hi all.
I have this issue with a classic Planning application deployed to run with the calculation module to Business Rules in v11.1.2.1. I have also load balanced EAS/APS and Planning servers but when I log into Hyperion Planning in one of the server and I check the available BR I can see them but if I go into the other Planning web I cannot. This is logging straight into the Planning Webs using the different servers names. Inside EAS I have done the necessary location, provisioning and cluster to be able to appear in both Planning webs but still not working.
Does anyone knows how to fix this problem?
Many thanks
J

The solution was to create a BR cluster within EAS and add both server locations into it
I hope it helps
Regards,
John

Business Rules not available in Planning

I logged into EAS console and created a business rule against my planning outline. It validated properly and even runs properly from the EAS console (changes data as expected).
But when I log into Planning to assign this rule to a form the business rule is not listed either under the TOOLS > Business rules menu option or under the Business Rules Tab in Form editor.
What do I need to do to get this business rule into Planning?

I am on 9.3.1.
I have 2 servers, the essbase (hy01) and the planning (hy06). When logging into EAS I usually select the essbase server to log into (hy01). I created 1 business rule while logged into hy01 and it appeared when I logged into planning through workspace. I associated that BR with the outline hy06/AppName/DBname and used that as the location as well.
After that business rule was a grand success if I log into hy01 when logging onto EAS and then try to expand the BR node I get a "Error logging in to Business Rules. The repository has not been configured or you are not authorized to use Business Rules."
But I can log into EAS using hy06 and access the business rules just fine (including the original one). But every business rule I have created since then does not show up into planning.
So, in retrospect, I guess my question might be why can't I use Business Rules when logging into EAS through the Essbase server (hy01) but have full functionality when logging in through planning server (hy06) except for being able to then see the business rules I create in Planning through Workspace?
I am logged in as admin and no permissions have changed.

11.1.1.3 Business rules not appearing in form

Hi
I am working in 11.1.1.3, and creating HBRs in calc manager, with variables, for use on planning forms (i.e. to "Run on Save")
Problem I have is that even after the rule is deployed, it is not visible in the "Business Rules" tab while editing the data form.
Anyone know of any bugs that might be causing this issue ?
Thanks

There are a few bugs that will cause this -- have you patched up to the latest EPMA, Calc Manager, and Planning patches that are available from support.oracle.com?
Regards,
John A. Booth
http://www.metavero.com

Shared Services 11.1.2 + Provisioned Roles for Business Rules not reflectin

Hi,
I have provisioned users to have 'Basic' role in shared services for Business rules. We are using Calc manager + classic planning app. However users are unable to see the business rules associated with the forms due to which the rules dont run on save. Is there a intermediary step which I am overlooking?
Regards,
N

Please ignore this question. I guess i posted in the wrong place. Not sure how to remove the thread

Business Rule Of Sample Application in Planning

Hi Planning Gurus,
I am unable to find where the business rule is saved in Planning Application (Sample Application shipped with Planning), though i see some default Rules under Business Rule within Admin console like aggall etc. But where are the basic calc like Revenue=Unit*Unit Price.
Thanks & regards
N Kumar

If the location and access has been set up on the business rule then they should appear soon after in planning.
If no business rules are showing and depending on your version, check that HBRServer.properties exists in the planning web server strucure e..g \Hyperion\deployments\Tomcat5\HyperionPlanning\webapps\HyperionPlanning\WEB-INF\classes
Cheers
John
http://john-goodwin.blogspot.com/

Business Rules not visible in Hyperion Planning

Similar Messages

Maybe you are looking for