Business system from SLD not visible in Integration Directory

Hi,
As on the project I do not have access to the SLD, another team created new business systems there. However, when I try in the Integration Builder(Configuration) to assign the newly created systems, I cannot see them on the "Select business systems" page.
What do you think might be the cause of that? (the SLD and the XI systems are fully customized and have been used successfully until now)
Thanks in advance,
George

Hi,
In Integration directory -> Environment(Menu) ->
Click on Clear SLD Data cache and try again.
If you are unable to get even after doing above step check whether cache is up to date or do full cache refresh. This will solve your problem.
Regards,
Sakthi

Similar Messages

Business systems defined in SLD not visible in Integration Directory.

Hi,
After having finished with the SLD configuration involving defining the product, software component, TS and BS. Then I imported in the Integration Repository from SLD and then defined message interfaces, types etc. After that, in Integration Directory when I am trying to assign new business system (to expose business system of sld as service), it is not showing me the newly defined business systems of SLD in the Integration directory.
Please suggest me a possible solution for this.
Thanks,
noor

Hi,
It happens sometimes due to Meta Data Issue,
Go for SLD Cache :
To clear the SLD cache, from the Integration Builder main menu, choose Environment ® Delete Cache for SLD Data.
Once we have deleted the cache for SLD data, accessing objects in the SLD may take longer than usual initially.
Still If you are not able to see the Business System when trying to import the business system. Go to Objects tab in ID --> Business System and you will find the imported Business System --> Right Click and ADD to Scenario.
Regards
Agasthuri Doss

How to Remove Business System From SLD

Hi Experts,
I Created Business System For Web As ABAP.
While Removing Business System From SLD Means I am Getting the Following Error.
java.lang.NullPointerException at com.sap.sld.wd.businesssystem.BusinessSystem.removeXIIntegrationServer(BusinessSystem.java:497) at com.sap.sld.wd.businesssystem.wdp.InternalBusinessSystem.removeXIIntegrationServer(InternalBusinessSystem.java:474) at com.sap.sld.wd.businesssystem.BusinessSystemMainView.RemoveOk(BusinessSystemMainView.java:450) at com.sap.sld.wd.businesssystem.wdp.InternalBusinessSystemMainView.wdInvokeEventHandler(InternalBusinessSystemMainView.java:477) at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87) at com.sap.tc.webdynpro.clientserver.event.CustomEventProcessor.handleServerEvent(CustomEventProcessor.java:45) at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleServiceEvent(WindowPhaseModel.java:362) at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:129) at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:344) at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processPhaseLoop(WebDynproWindow.java:355) at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:152) at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:298) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:705) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:659) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:227) at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:150) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:56) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:47) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Please Let me know How to Remove it from SLD.
Regards
Khanna

HI Khanna
Delete the Business System in your IR and ID, if any interfaces are developed under this BS.
See if any items in locked state...and also after deleting it...activate it and refresh the cache. this shud help
If you deleted from everywhere then it should not give that message.
Try after refresh cache using SXI_CACHE.
Finally Delete the BS from SLD
In general , that to be you are facing this type of problem only inthis situation , then you have to refresh SLD cache.
See the below link
/people/sravya.talanki2/blog/2005/12/02/sxicache--ripped-off - SXI_CACHE
XI Runtime cache error: Cache contents are obsolete
Cache Refresh - SAI_CACHE_REFRESH
/people/sravya.talanki2/blog/2005/11/03/cache-refresh-errors--new-phenomena
Cheers..
Vasu
<i>** Reward Points if found useful **</i>

The Business-System from SLD canu00B4t read

Hello,
during export from an configuration object folloging exception occure:
"The Business-System from SLD can´t read"
It seams all OK ...
Thanks in advance,
Frank

Did you change the name of the Business System in the past? Then you need to keep the old Business System name in the SLD, as during exporting and importing of configuration objects the history of the objects is checked as well.
Regards
Stefan

SLD Business system not appearinn in Integration Directory Configuration

Hello,
I have configured a business system in SLD(defined a Technical system,assigned it to a business system),but when i go to
Integration directory and assign a business system without a partner,I am not able to see this business system.
can any one please help.
regards
kaushik

environment -> clear SLD cache

Error while reading ID of own business system from the SLD for system

Dear all,
We running on a SAP PI 7.1 enhancement pack 1.I know that there some threads about this subject, but unfortunately all suggestions found so far didn't solve my problem:
- SLDCHECK reports no errors
- SLAPICUST: pointing to the SLD
- SXI_CACHE with full refresh: no result.
Does anyone have a clue for me?
Kind regards,
John.

I hope you are facing this prolem with one particular Business System.. Since you have checked all the points and still facing this issue then try below options..
1. First try to clear full SLD cache and then test.
2. If cache doesn't solve the issue then delete the Business System from SLD and Integration Directory first then re-create the BS in SLD and "Clear SLD Data Cache" from "Environment" menu in Integration Directory and then import the Business System and test your scenario.

SAP XI 3.0 - Error while reading the ID of own business system from the SLD

Error while reading the ID of own business system from the SLD for system Quality (QOC) and Client 100.
I get this error in the SXMN_MONI. The business process is that the Interface to send master schedule and finished inventory from the legacy system to SAP to create planned orders in SAP for all Plants.
I could able to get "SUCCESSFULLY PROCESSED" in development and production. But only in Quality I getting this error. Could anyone help me to fix this issue.
thanks...

Probably, its due to incorrect RFC Adapter properties in config.
Go to Integration COnfiguration. Double Click on the Business System for your R/3 system. On the right hand screen, Click on Service-->Adapter Specific Parameters.
Check whether the Logical System Name comes up as SAP<SID> and whether R/3 system ID and Client are appropriate.
If these values are inappropriate, make changes to the corresponding Technical System defined in the SLD. After you have made the necessary corrections, come back to Integration COnfiguration, Double click on Business SYstem for R/3. Switch to Edit Mode. Click on Service-> Adapter Specific Parameters and then click on the Icon between Apply and Cancel buttons, inorder to compare with SLD and make those values reflect in config. Then click on Apply and Save the Business System.
After this, you can retry sending the message.
Rgds
R Chandrasekhar

Error while reading the ID of own business system from the SLD for system

Hello,
I try to send master material data from a 4.7 system via XI 3.0 to an autoID Infrastructure system 2.1. All Communication Channels, Receiver Agreements, Receiver and Interface Agreements are configured. The IDOC gets propper into the XI, Inbound Message is "green". Now, I get the following message:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
<SAP:P1>ZTA</SAP:P1>
<SAP:P2>013</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading the ID of own business system from the SLD for system ZTA and client 013</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Can anybody help me?

Probably, its due to incorrect RFC Adapter properties in config.
Go to Integration COnfiguration. Double Click on the Business System for your R/3 system. On the right hand screen, Click on Service-->Adapter Specific Parameters.
Check whether the Logical System Name comes up as SAP<SID> and whether R/3 system ID and Client are appropriate.
If these values are inappropriate, make changes to the corresponding Technical System defined in the SLD. After you have made the necessary corrections, come back to Integration COnfiguration, Double click on Business SYstem for R/3. Switch to Edit Mode. Click on Service-> Adapter Specific Parameters and then click on the Icon between Apply and Cancel buttons, inorder to compare with SLD and make those values reflect in config. Then click on Apply and Save the Business System.
After this, you can retry sending the message.
Rgds
R Chandrasekhar

Error while reading ID of own business system from the SLD

HI guys when trying to send Idoc from my R/3 system to SUS i am getting the following error in XI
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
<SAP:P1>DSM</SAP:P1>
<SAP:P2>900</SAP:P2>
<SAP:Stack>Error while reading ID of own business system from the SLD for system DSM and client 900</SAP:Stack>
I checked in sxmb_adm on both the ends on Xi as well as on my SUS server in Xi the role is the Integration server and on the SUS it is Application server also checked SLDAPICUST which is configured rite. Plz help me to come out of the problem.
Regards,
Anand

Hi Anand,
check the two thing's in XI.
1. First created technical system in XI to identify your XI server (Web as ABAP and Web AS Java)
2. Create the business system based on above technical system and select the role of business system is Integration server.
URL : http://<hostname>:<ICM Port>/sap/xi/engine?type=entry.
3. Create the technical system based on your SAP R/3 system.
4. Create the business system based on your SAP R/3 system.
here you need to select role of business system : Application system.
related integration server is : <XI System SID has to come>
and try to refresh the initical cache once ...
http://<hostname>:<j2ee stack port>/CPACache/refresh?mode=full
after all the things post what is the problem you are faceing.
Regards,
Venu.

Error while reading ID of own business system from the SLD for system D18

Dear guru's,
I have almost completed a file2proxy scenario but I'm stuk on the following.
When sending a message the outbound adapter says:
<b>Error while reading ID of own business system from the SLD for system D18 and client 200</b>
What's the problem? I'm using a HTTP connection in the comm. channel. In this http connection a user with SAP_ALL is defined.
Any suggestions?
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
<SAP:P1>D18</SAP:P1>
<SAP:P2>200</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading ID of own business system from the SLD for system D18 and client 200</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Login to system D18 and client 200 and check the TC SLDCHECK and also as per my pervious message check the entries in the SLDAPICUST, it should point to the Server on which SLD is present usually XI server https.
Actually what happens in this error is when you are done with the configuration part in the ID, you are trying to eceute the scenario File to proxy, when it comes to identify the receiver system which is D18 clnt 200, it goes to SLD to check it and SLD is trying to ping to the machine D18 this connection is set from the TC SLDAPICUST on the machine D18.
here the problem is that either the D18 is not able to ping to the SLD and also try refreshing the SLD cache.
Hope you problem is fixed

How to change the ROLE: Integration server in business system in SLD

Hi,
I am facing error in communication, becuase the integration server has been attached to in correct business system with incorrect client (001 instead of 700).
In SLD, business system, 'integration' tab there is button "Associate with XI'.
I have selected the role as integration server for the corrrect business system and aslo gave the correct pipeline url for integration server.
When I press the button "Associate with XI" and Save nothing happened.
How do i change my integration server.
Please help.
Regards,
Rehan

Hi Gaurav,
I have checked the teachnical system and its of type WEB AS ABAP. and when i click on the business systems tab, there are two business systems. When i double click on the business systems
I realised that both the business systems has been defined with role: integration server.
IN one business system i can see that there is "associate with XI" button.
But when i want to chnage the business system with correct client 700 , i tried pressing the button after entering the correct pileline url.... nothing happens.....
Can you please let me know the procedure to chnage the technical system with respect to integration engine???
PLease help as our project is held up due to this.
regards,
Rehan

Error while reading ID of own business system from the SLD for system DPI

Hi All,
My sceanrio is Proxy to JDBC. and its B2B. am sending the data from BI system and based on the country field from the source, table is decided and value is updated in the table.
In RWB->Component Monitoring->Adapter Engine->Test Message, I have given the Sender component,Receiver Party,Receiver component,Interface,Interface Namespace,userid and password,Quality of Service and pasted the payload.
Now I am getting the error :Error While Sending Message: Error stack from response: Error while reading ID of own business system from the SLD for system DPI and client 001 Internal error in Landscape Directory
Please help me out.
Thanks
Kiruthi
Edited by: kiruthiga balusamy on Nov 24, 2009 4:02 PM

Hi,
Check transaction SLDAPICUST for correct SLD configuration.
http://help.sap.com/saphelp_nw70/helpdata/EN/0b/8512417301ee6fe10000000a1550b0/content.htm
~Sanv...

Error when reading the ID of the business system from the SLD

Hi,
I am working on a scenario JDBC - XI - BW (ABAP Proxies). I configured all the steps required to connect XI & BW systems. The SLDCHECK transaction is all green. I was able to connect to SLD from BW using SXMB_IFR tcode too. I was able to look at all the XI Repository interfaces from SPROXY tcode in BW. Created a new ABAP proxy (class interface and method) for the message interface in XI from BW (SPROXY Tcode). Created all required config in XI Directory. Got the message from JDBC adapter, mapping done successfully, and the message failed in the CALL Adapter Step.
The error is "Error when reading the ID of the business system from the SLD for system BWS and client 100."
What could have gone wrong. Thanks in advance.
Srini

Hi,
:::::::One Should Have the Following Roles AS A XI Developer With Out Admin Rights ::::::
1) SAP_XI_Developer_ABAP +
2) SAP_XI_Developer_J2EE +
3) SAP_XI_MONITOR_ABAP +
4) SAP_XI_MONITOR_J2EE +
5) SAP_SLD_ADMINISTRATOR +
6) SAP_XI_BPE_MONITOR_ABAP +
7) SAP_XI_DEMOAPP
8) SAP_XI_DISPLAY_USER_ABAP +
9) SAP_XI_DISPLAY_USER_J2EE +
Regards
Sesh

SWCV assigned to Bus. System from SLD are not transferred to Int.Builder

Hi guys,
I am on PI7.11 and have currently stuck with the situation - Bus. System A has SWCVs assigned to it in the SLD.
However, when opening the Business System as communication component in the Integration Bulder and going to the last tab
"Other attributes" I cannot see some of the SWCVs that are marked as installed in the SLD. I have tried several approaches - Clear SLD data cache, etc. with no succcess.
Do you have a clue how to overgo this ?
Best Regards,
Lalo

>> However, when opening the Business System as communication component in the Integration Bulder and going to the last tab "Other attributes" I cannot see some of the SWCVs that are marked as installed in the SLD.
1)Are you able to see your software component in ESR?
2) If you have already created design objects in ESR with that software component, you can able to see the software compnent version for every outbound(sender tab) interface and inbound(receiver tab) interface in your Business system screen (right most side) of Integration Builder.
Please check it and let us know.
3) This could be caching issue. Clear SLD cache and refresh the business system too. See that helps

SLD Error in IE:Error while reading ID of own business system from the SLD

Dear Champs,
Scenario : JDBC to Proxy(APO system)
We are getting below error in MONI UAT Box. All other interface are working fine but we are facing issue for a particular Bussiness System also logical system are maintained properly.the same interface is working fine in other UAT box.
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
<SAP:P1>R/3 Sys ID</SAP:P1>
<SAP:P2>"Client"</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading ID of own business system from the SLD for system "R/3 Sys ID"and client "Clnt no"</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
Regards,
Manikandan

Hi Mani,
Solution 1:
Check if the techncal system has associated Business system. I think there is something wrong in your SLD configuration and try to correct it.
Solution 2:
Create a Business system in the ID, and create the communication channel do the respective changes in ID ( I.e Receiver agreement, Receiver determination & Interface).

Business system from SLD not visible in Integration Directory

Similar Messages

Maybe you are looking for