Buttons are not working on Vision

Hi All,
I developed a page where two buttons are there one for Printable page and other is to open Oracle Form, these are working fine on my machine but on Vision these are not working.
Please suggest If anyone have faced this issue before.
Thanks in advance.
Regards,
Reetesh Sharma

Abdul,
both are normal buttons(not submit button), URL is attached to that, it is working fine on my machine but same thing is not working on Vision.
One more interesting thing is there, when I click on "About this page link" it takes me to next page there also "Printable Page" isn't working.
Regards,
Reetesh Sharma
Edited by: Reetesh Sharma on Sep 29, 2009 2:03 AM

Similar Messages

  • File Upload Action Button are not working

    Hi  ,
    In the File Upload Process when the processor are open change request there are Action Buttons  Approve/Reject ,
    When the CR Processor are Click on either Approve or Reject  these two Action Button are not working (means its not show any activity) , while rest of all action button like save,close check , Run validation  are working ...
    While Processor has authorization to Approve/Reject that CR ...

    Hello Nikhilesh
    These buttons are dependent upon the workflow steps. Check that. Check the linkage for workflow. Check SWI6 - CR number and the step. Based on the step you can identify whether the proper step is assigned or not.
    Thanks
    Kiran

  • HT1430 iPhone 4s keypad the "o" and return button are not working - solutions?

    iPhone 4s keypad, the "o" and the return button are not working. Upgraded the software, now the "o" works in the verticle position only, and the return works in the horizontal position only. Help!

    Hi, VRS77. 
    Thank you for visiting Apple Support Communities. 
    I would start with closing any open applications in multitasking and restarting the device.  If unfamiliar with multitasking, I have included a screenshot on how to process an application close.  Test the results after processing these steps.
    iOS: Force an app to close
    If the issue persists, here are a couple addition troubleshooting steps I could recommend. 
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response
    http://support.apple.com/kb/ts1827
    Hope that helps,
    Jason H. 

  • The forward, back, refresh, and stop buttons are not working. Even after installing the latest version. Anyone else having this issue?

    The forward, back, refresh, and stop buttons are not working. Even after installing the latest Firefox update. Also my home page stopped loading upon startup even tho I have it setup to do so. Anyone else experiencing these issues? This is my second request for help and of course, Firefox on-line support is always closed.

    Those are all symptoms of a problem with the places.sqlite file, for details see http://kb.mozillazine.org/Locked_or_damaged_places.sqlite

  • All iPad buttons are not working even after resetting it (hard, soft and via iTunes).

    All iPad 2 buttons are not working even after I resetting it. I tried both of the hard and soft reset, and even resetting my iPad via iTunes. 
    The volume buttons work after I tried this method : "hold iPad in landscape mode. Push the home button while rotating it to Portrait mode, release it."

    I have the same issue, nothing I did fixed the problem, I would suggest if you can visit apple store and give us your feedback with them.
    for me I can't go to apple store because I don't have any store near me, I will have to wait for 2 months to travel!

  • HT4623 wifi connecting buttons are not working

    my i phone 4s not getting connected to wifi or even wifi buttons are not working.

    What do you mean they are not working?
    Does the device detect Wi-Fi networks?
    Is there an error when trying to connect?

  • My iphones buttons are not working and it shows a black screen whith apple logo on it what should i do now?

    my iphones buttons are not working and it shows a black screen whith apple logo on it what should i do now?
    and i have to post sth importent on instagram tonight so its ergent please help....

    Greetings motahare,
    After reviewing your post, I have located an article that can help with iOS device issues. It contains a number of troubleshooting steps and helpful advice for the issue you are experiencing:
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    Thank you for contributing to Apple Support Communities.
    Best,
    Bobby_D

  • Hey there, my ipad had a dialogue box pop up on the screen and the buttons are not working so i cant exit out or type. PLease help me

    hey there, my ipad had a dialogue box pop up on the screen and the buttons are not working so i cant exit out or type. PLease help me

    Perform a Reset...  Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...

  • Does anyone know why my side volume buttons are not working

    My side volume buttons are not working, How do I fix it

    i can relate...it's frustrating! i suddenly have that same issue, as well as my off button isn't working....my phone was functioning just fine until my granddaughter played with it for about 5
    minutes> that's all it took, the volume & off button didn't work when she gave it back to me. call it coincidental...who knows, and know one seems to know the FIX. but i can tell you that if your sound setting is ON, then that's not going to fix the problem. i've even reset my phone from settings, but that didn't resolve the issue either. the next step would be to plug into itunes & do a factory restore.....but i read someone tried that and it didn't work either,  so good luck getting a resolution for this...:)

  • Teh buttons in my Hotmail no longer work and I ntoced that buttons are not working in my bank account. Everything works OK in IE.

    The various buttons eg Reply, Reply All etc are not working in my Hotmail account. Also, some buttons have stopped working with my internet banking. Everything works OK with IE.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • HT201401 My volume control buttons are not working on my Iphone 4s....

    but this only occurs when I don't have headphones in or I am not on a call.  If I have headphones in or if I am on a call using either the earpiece or speakerphone I have full volume control.  If I am using my phone to listen to music or anything else where there is audio the volume buttons do not work.  When I press the button the buttons the ringer icon appears on the screen but there are no bars under the icon and it doesn't move the volume.  I have tried rebooting the phone as well as blowing out the headphone port and the charging port.  My phone is updated to the latest release.  Any help would be much appreciated.

    Hi
    Are you talking about the function buttons F1-F9?
    These buttons work in connection with FN button; i.e Fn + F5
    The Value Added Package as well as the Toshiba Flash Card Support Utility needs to be installed in order to use the flash cards (the menu on the screen showing the function buttons)
    These software parts can be downloaded here:
    http://www.mytoshiba.com.au/support/computers/satellite/a660/psaw3a-07t00r/download?os=25
    Note: before you would start with new installation try to restart the flash cards: all programs -> Toshiba -> Flash Cards

  • TS2771 screen works but buttons are not working and stuck in settings

    i have an ipod touch 4 and the screen is working but the home button and lock button is not working but the screen is and im stuck in settings please help asap i have to go to school

    Try:                                               
    - iOS: Not responding or does not turn on
    When it says place the iPOd in recovery mode
    Place the iPod in recovery mode using one of these programs:
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    or
    http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                           
    RecBoot tip
    RecBoot may have problems on 64X windows, then try:
    Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
    For MAC or PC       
    The Firmware Umbrella - TinyUmbrella
    Installs blootware on PC too
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • Mini ipod menu and play buttons are not working

    My ipod menu button has not worked now for a few months. I can't get back to my main playlist and choose certain things, I just have to listen to the all the songs. Now the play button is not working either, its working to turn on-play-pause, but not to turn it off. So it stays on till the battery goes dead. Help Please-anything!!
    HP Pavilliain   Windows XP  

    See this.
    How to reset the iPod if it appears frozen or doesn't respond.
    It may take quite a few attempts and is best done connected to power.
    If this doesn't work, try restoring the iPod to factory settings.
    However, it seems as if it may be a hardware problem and need service.

  • In Editable ALV the BACK/CANCEL/EXIT buttons are not working?

    Hello,
    I wrote a editable FM based ALV, working fine that when user changes the data and press SAVE button, values are transfering into prog. But, i need to put a validation that, if user changes the values and press BACK/CANCEL/EXIT button, i need to popup the message that "Do you want to save changes", my PF-STATUS is good(because, SAVE is working).
    But, its not working that when user done changes and press BACK button (forgot to press SAVE button), system taking me to selection screen/screen 0!! I my code is as below,
    FORM pick USING v_ucomm     TYPE syucomm
                                         it_selfield TYPE slis_selfield.
      DATA: v_answer TYPE char1.
      READ TABLE it_z_tbl  INDEX it_selfield-tabindex
       INTO w_z_tbl.
      CASE v_ucomm.
        WHEN '&IC1'.
            " working fine this functionality
          ELSE.
            MESSAGE i000 WITH 'Double click on key field'.
          ENDIF.
        WHEN 'SAVE'.
            " working fine this functionality
        WHEN BACK' " OR 'CANCEL' OR 'EXIT'.
          PERFORM popup_for_user_decision CHANGING v_answer.
          CHECK v_answer = '1'.
          PERFORM now_update.
      ENDCASE.
    ENDFORM.     
    when i put the break point on the first line of this piece of code, its not stopping on pressing BACK/CANCEL/EXIT buttons!! (its stoppig for SAVE press or double click)
    Its stopping at this point,
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'.
    EXPORTING
    i_callback_user_command  = 'PICK'
    IMPORTING
    EXCEPTIONS
    IF sy-subrc <> 0 =================> its stopping at this point!
    ENDIF.           
    Pls. let me know why system is not recognising that i hv a PICK form (SAVE and Double clicks are working fine)?
    Thank you

    Hi,
    Actually BACK is standard user command so it is not stopping and going to selection screen.
    Give some other use command like 'BCK' and try....

  • The forward and back buttons are not working. I want to use these buttons after accessing a different site but not it has not worked

    <blockquote>Locked by Moderator as a duplicate/re-post.
    Please continue the discussion in this thread: [tiki-view_forum_thread.php?comments_parentId=693097&forumId=1]
    Thanks - c</blockquote>
    == Issue
    ==
    I have another kind of problem with Firefox
    == Description
    ==
    I am not sure what happened or how this happened but, for some reason my back and forward buttons are no longer functioning. I have uninstalled and re-installed firefox twice and updated the Torbutton but yet, it is still now working. I can;t find answers from your forum.
    == This happened
    ==
    Every time Firefox opened
    == earlier this week
    ==
    == Troubleshooting information
    ==
    Application Basics
    Name
    Firefox
    Version
    3.6.3
    Profile Directory
    Show in Finder
    Installed Plugins
    about:plugins
    Build Configuration
    about:buildconfig
    Extensions
    Name
    Version
    Enabled
    ID
    CoolPreviews
    3.1.0521
    true
    Cooliris
    1.11.6
    true
    [email protected]
    Torbutton
    1.2.5
    true
    Modified Preferences
    Name
    Value
    accessibility.browsewithcaret
    true
    accessibility.typeaheadfind
    true
    browser.history_expire_days.mirror
    180
    browser.history_expire_days_min
    5
    browser.places.smartBookmarksVersion
    2
    browser.startup.homepage
    http://www.google.com/
    browser.startup.homepage_override.mstone
    rv:1.9.2.3
    browser.tabs.loadInBackground
    false
    extensions.lastAppVersion
    3.6.3
    network.cookie.prefsMigrated
    true
    places.last_vacuum
    1274131105
    print.macosx.pagesetup-2
    PD94bWwgdmVyc2lvbj0iMS4wIiBlbmNvZGluZz0iVVRGLTgiPz4KPCFET0NUWVBFIHBsaXN0IFBVQkxJQyAiLS8vQXBwbGUvL0RURCBQTElTVCAxLjAvL0VO…
    print.print_bgcolor
    false
    print.print_bgimages
    false
    print.print_command
    print.print_downloadfonts
    false
    print.print_evenpages
    true
    print.print_in_color
    true
    print.print_margin_bottom
    0.5
    print.print_margin_left
    0.5
    print.print_margin_right
    0.5
    print.print_margin_top
    0.5
    print.print_oddpages
    true
    print.print_orientation
    0
    print.print_pagedelay
    500
    print.print_paper_data
    0
    print.print_paper_height
    11.00
    print.print_paper_size_type
    1
    print.print_paper_size_unit
    0
    print.print_paper_width
    8.50
    print.print_printer
    print.print_reversed
    false
    print.print_scaling
    1.00
    print.print_shrink_to_fit
    true
    print.print_to_file
    false
    print.print_unwriteable_margin_bottom
    56
    print.print_unwriteable_margin_left
    25
    print.print_unwriteable_margin_right
    25
    print.print_unwriteable_margin_top
    25
    privacy.cpd.siteSettings
    true
    privacy.sanitize.migrateFx3Prefs
    true
    privacy.sanitize.timeSpan
    0
    security.warn_viewing_mixed
    false
    == Firefox version
    ==
    3.6.3
    == Operating system
    ==
    Intel Mac OS X 10.5
    == User Agent
    ==
    Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.5; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3
    == Plugins installed
    ==
    *-Cooliris embbedded in a tab
    *Gecko default plugin
    *Runs Java applets using the latest installed versions of Java. For more information: Java Embedding Plugin. Run version test: Java Information.
    *BrowserPlus -- Improve your browser! -- http://browserplus.yahoo.com/
    *iPhoto6
    *Office Live Update v1.0
    *Java Plug-In 2 for NPAPI Browsers
    *Shockwave Flash 10.0 r42
    *RealPlayer Plugin
    *4.0.50524.0
    *The QuickTime Plugin allows you to view a wide variety of multimedia content in web pages. For more information, visit the QuickTime Web site.

    I know there are some problems with Question Slides, but I'm using them as timesavers. Building question slides yourself takes a lot more time. When I started using them, I had to find the right settings to get the results I wanted, but now mostly I do not have that much problems anymore (if the internet connection is not failing).
    What are your Quiz settings: can the user have more than one attempt, do you allow Backward movement, Review possibility etc? Is the uploading to a LMS (which one), what were the Manifest settings?
    Lilybiri

Maybe you are looking for

  • File formats for uploading/download

    Hi Experts, Loading of data(master/transaction) involved two steps. 1. Loading file to Data files folder . 2. From Data file folder to BPC application. For step1, what are BPC allowed file formats? Is it only .txt & .csv? For step2 , what are BPC all

  • Best Practice Analyzer database mismatch error

    Hi all, I am getting the following critical error when I run the BPA on a couple of our BizTalk servers and wondered if anyone had seen the same? "The version of BizTalk Server does not Match the Version of BizTalk Management Database Schemas" I am u

  • Dumpfile owner

    Hi All, I have a problem with transporting a dumpfile created by Datapump. Can we change an OS owner of dumped file? In our system, we want to transport a dumpfile from production server to remote server as a part of daily backup routine by using thi

  • Telnet with Run Program Activity

    Hello Experts, I have a quick question with respect to the Run Program Activity. Is it possible to have a telnet session with the run program activity without loosing the connection ?  So my first activity will be the telnet connection. Once the conn

  • Neo4 Ultra Plat. / Opty 175 / Corecenter 2.0.2.1 errors on boot :(

     Heya., Been running my Neo4 Ultra Plat. since they first came out. This is a PCB v1.0. Thought i'd pop a Opty 175 in it and test drive it. It's running the latest 1D bios and all the most recent drivers. It's really odd Corecenter installs fine and