Buttons not working in preview mode

i have a really strange issue that i have spent way too long on and need some help.
I have a submenu i created, from a template, and had everything working perfectly.  i removed the text layer from the buttons on the right side and now all but 3 links work.  I have deleted the "damaged" button and copied a working button nd then relinked and it still doesn't work.  I have turned off auto-button routing and re-numbered every button.  I was able to get 2 of the buttons to work (no idea how) but now they are not working again. 
I am sending a complete screen shot of the damaged button, compared with one right beside it.  Please tell me what i am missing?

For that matter, the "return to menu" which is set to a Main button type, isn't working either.  that is one of the three.  After i had removed the damaged button and copied it from another it worked.  Then i simply edited the text of a different button (mind you one that still works) and the "return to menu" quit along with the bottom 2 buttons.  I just can't figure it out.  I have shut the app down and restarted and nothing seems to be working

Similar Messages

  • Encore Remote Preview Buttons Not Working in Preview Mode

    I have had this annoying problem on several ocassions and it's back again. I have never been able to figure out what causes it.
    When in the prview mode to test the DVD compliation to see if the remote buttons will change between the menu buttons I created, I am unable to select any of the three buttons in the menu with the remote selector at the bottom of the preview window.  I am able to select them with a mouse click but not with the remote buttons meaning that when the DVD is built, a real reomte will not change the titles that are associated with each button.
    What can be causing this to keep happening.  The compilation in Encore is a linked composition form Premier CS4--both Encore and Premier are CS4.
    Please help please.
    Thanks!!

    I know this post is old, but I found it as I am having the same issue.  Encore CS5. I have a menu that I have 9 buttons layed out, near the bottom, and the previous/next and main menu buttons are near the top. The 9 on the bottom are each numbers 1-9. However when I preview it starts at 1 then pressing right arrow does not jump to number 2 but #11, the "next" arrow button on top of page. 
    I will post a screen shot with buttons 1-9 hilighted, showing they are not touching, and the button routing turned on.
    Any thoughts? 
    I guess I will make a new menu and see if I just need to reuild it.

  • Captivate 8: Buttons not responding in preview mode

    I've installed the trial version of Captivate 8.
    At the moment none of the buttons are working in preview mode.
    They do however work, when published.
    I've checked my properties, and have my buttons checked to 'rest of the slide'.
    Anybody come across the same problem, or have a solution for me?

    Adobe released a patch for Chrome issue. Check this out.
    http://blogs.adobe.com/captivate/2014/07/update-on-captivate-html-5-content-playback-issue -in-google-chrome-browser.html
    Sreekanth

  • Shape button not working in preview made

    Hi
    I am working on captivate 8 responsive project. I have created button using shape.
    But when I publish for preview mode in Mozilla latest browser and  found that all slide content disappear.
    Also checked with sample responsive project in captivate 8. I found same issue.
    Please help me in it.
    Thanks and Regards,
    Manish

    Smart Shape buttons do not work in Firefox i'm afraid, it will leave the whole slide blank. We've had a good look at trying to find a fix/hack but unfortunately it looks like something Adobe and/or Mozilla need to sort out.

  • Buttons not working in fullscreen mode

    Hi everyone,
         I have a site where our Flash content can be sent to fullscreen by the user. When in fullscreen mode, in some computers the buttons within the content and the mouse stop working completely. It still exits from fullscreen by clicking the escape buttons.
    I have a Win XP computer where it works in Firefox and IE but won't work within Chrome. They both have the latest player installed.
    I have a Windows Vista where it does not work in any browser.
    On a Linux box (version 10,1,53,64) it works on any browser.
    On another Win XP computer with version 10.0.45.2 it works with any browsers.
    On some Macs it works, on some it doesn't.
    The swf file was produced with Flash CS3.
    Any ideas?

    For that matter, the "return to menu" which is set to a Main button type, isn't working either.  that is one of the three.  After i had removed the damaged button and copied it from another it worked.  Then i simply edited the text of a different button (mind you one that still works) and the "return to menu" quit along with the bottom 2 buttons.  I just can't figure it out.  I have shut the app down and restarted and nothing seems to be working

  • Portege M700 - Rotation Button Not Working In Tablet Mode

    I have a Portege M700 and when I turn it into tablet mode the rotation button quits working.
    It works when it in laptop mode.
    I have the rotation utility set to go into secondary landscape and its no longer switching and the button on the front of the screen will not switch it anymore either.
    I can go into the rotation software and rotate it manually.
    Any suggestions on how to get the button functioning again?
    Oh and I am running Vista Business with SP 2.
    Any help would be appreciated.

    Yes it does rotate it just wont rotate with the button once I turn it . also when I turn it to tablet mode it goes into portrait, I need it to go into secondary landscape. I made sure that the setting are set to secondary landscape and that the button is set to rotate. but it just wont. I have reinstalled the drivers for the rotation utility. any other ideas would be very helpful. thanks

  • Sharepoint send to button not working with document mode 9

    Hi All,
    We are using document mode 9 for HTML 5 in the master page but the SharePoint send to button is not working with ie 9.
    Can anyone help me to resolve this issue.

    SharePoint 2010 doesn't use HTML 5, so its possible that the browser is running in quirks mode. Try the default compatibility mode and see if that works for you.
    Steven Andrews
    SharePoint Business Analyst: LiveNation Entertainment
    Blog: baron72.wordpress.com
    Twitter: Follow @backpackerd00d
    My Wiki Articles:
    CodePlex Corner Series
    Please remember to mark your question as "answered" if this solves (or helps) your problem.

  • Edit button not working in advanced mode

    When I choose a page layout that is pre- made in the options, I can then switch to the advanced mode, but can't get my edit button to work so I can edit the frames or pictures.  Any ideas why?

    Hi sewloco,
    I order to edit the picture/image when in Create mode, you can directly use the toolbar present on the left side in PSE10. You don't need to switch to Edit mode.
    You can also add a new frame/background/graphic from the Artwork Panel. You have a complete set of Effects and layouts available as well. If you want to add text, use the Text tool (press 'T').

  • Apply button not working In Sharepoint Integrated mode

    Env:- SSRS 2008 R2 with Sharepoint 2010
    For some report users, the Apply button is not working (SharePoint integrated mode).
    After they select all the parameters in report and hit apply button , the page remain blanks and nothing happens.
    This issue is experienced by certain user only.
    When i checked the ULS log i found this during that duration
    Process                                     Category                          
    Category          EventID
    ReportingServicesService.Exe    Sharepoint Foundation      Database              4ohq
    Site Enumeration Stack:   
    at Microsoft.SharePoint.Administration.SPSiteCollection.get_Count()    
    at Microsoft.ReportingServices.SharePoint.ObjectModel.RSSPBaseCollection.get_Count()    
    at Microsoft.ReportingServices.SharePoint.Server.SharePointPropertyProvider.GetProperty(String propertyName)    
    at Microsoft.ReportingServices.SharePoint.Server.SharePointPropertyProvider.GetSystemUrl()    
    at Microsoft.ReportingServices.Library.GetSystemPropertiesAction.PerformActionNow()   
     at Microsoft.ReportingServices.Library.RSSoapAction`1.Execute()   
     at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.GetSystemProperties(Property[] Properties, Property[]& Values)   
     at Microsoft.ReportingServices.WebServer.ReportingServiceSPImpl.GetSystemProperties(Property[] Properties, Property[]& Values)  
    at Microsoft.ReportingServices.WebServer.ReportingService2010Impl.GetSystemProperties(Property[] Properties, Property[]& Values)    
    at Microsoft.ReportingServices.WebServer.ReportingService2010.GetSystemProperties(Property[] Properties, Property[]& Values)    
    at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)    
    at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)   
     at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)  
    at System.Web.Services.Protocols.LogicalMethodInfo.Invoke(Object target, Object[] values)    
    at System.Web.Services.Protocols.WebServiceHandler.Invoke()    
    at System.Web.Services.Protocols.WebServiceHandler.CoreProcessRequest()   
     at System.Web.Services.Protocols.SyncSessionlessHandler.ProcessRequest(HttpContext context)    
    at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()   
     at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)    
    at System.Web.HttpApplication.ApplicationStepManager.ResumeSteps(Exception error)    
    at System.Web.HttpApplication.System.Web.IHttpAsyncHandler.BeginProcessRequest(HttpContext context, AsyncCallback cb, Object extraData)   
     at System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr)    
    at System.Web.HttpRuntime.ProcessRequestNoDemand(HttpWorkerRequest wr)   
     at System.Web.HttpRuntime.ProcessRequest(HttpWorkerRequest wr)    
    at ReportingServicesHttpRuntime.RsHttpRuntime.ProcessRequest(IRsHttpPipeline rsHttpPipeline) 
    Can somebody please help on this.
    Thanks,
    Sandeep
    ~~ Mark it as Answer if you find it correct~~

    Hi Sandeep,
    Thanks for your feedback.
    I haven’t find any documentation illustrate this limitation, it’s just my experience,  I have a report which contains a muti-value parameter, it contains 500 value items and the length of each value is equal or greate than 10 characters, when I select
    all parameter values, there is no response when I click the apply button, however, when I only select several items in it, the report showing fine, I could not sure your issue is the same with mine, it’s just my conclusion. If your issure is not related to
    the length of the selected parameter, just occures to certain users even they selected with the same parameter values with the other users who run fine with this report, then this reply should not adapt to your scencario, it is so unbeliveable it is not working
    only for certains users, I have not experience this issue before, and the information you provided is so limited that I could not address the root cause of your issue.
    Thanks,
    Bill Lu
    Bill Lu
    TechNet Community Support

  • Title & Menu Buttons not working correctly on remote control/ set top player but work in preview.

    Title & Menu Buttons not working correctly on remote control/ set top player but work in encore preview. This only happens for a Blu ray project. When a user presses the menu button it should go to the previous menu they were on but it goes to the main menu. When they press the title button they should go to the main menu but it doesn't do anything. My DVD projects work as expected.I've tried creating a new "test" project with different footage and still get the same undesirable results.
    Overrides grayed out and set to "not set" for timelines and menus.Project settings and build are set to blu ray. Also I've noticed when I preview a Bluray project the preview window shows a red colored disc next to the Title button when viewing the timelines and green when playing the menus but not so for a DVD project it displays red if motion menus and or timelines are not rendered/encoded. I'm not using motion menus and all the media is encoded according to the project specs.
    I've searched this forum but couldn't find the answer. Any help or redirects to a solution would be appreciated. Working with CS5. Thanks.

    I found out on my Samsung Blu ray player the remote has a tools button on it that brings up audio, angle, chapter selection etc.and also title selection which is actually the menus and the timelines unfortunately. It's not as easy or direct as last menu selected but it's a workaround at least. I also plan on using a pop up menu. I'll let you know.

  • Ducking music-track not working in preview

    Tried ducking a music-track in several clips, but couldn't get it to work reliable. On the first clip it worked, on others volume level of the music-track stayed the same, whatever value I've set the ducking slider to.
    After much experimenting and browsing the web, I found the following post by Winston Churchill:
    http://discussions.apple.com/thread.jspa?messageID=6636047
    He recommended to export the clip and check the final result. And in fact, the music level followed the setting in the exported movie.
    So this is a bug in iMovie08. While it is not a big issue, if you know the ducking works on export, it can drive you nuts, if you rely on iMovies preview mode and can't get it to work.
    And what makes me wondering even more, that this post is from Feb 18, 2008 and the bug is still present in June 2008.
    Peter

    hi there
    i had a problem with my wifes iphone 4s, today morning while travelling to work i changed a setting on repeat option and changed it to repeat artist, it was fine until when i finish my work and on my way back i found songs are not playing anymore, lots of stop signs next to my song list, play/pause button not working, album arkwork keep moving from one to another on its own, so after i reach home i try to do some research on Apple support communities, try to soft reset my phone closing all the apps on background didnt work, also note that control centre music player was not working as well. none of the solutions worked. after trying for two hours i found out that the trouble is in repeat options , so i changed it from repeat artist to repeat off. and the music start playing as usual, but i still have those stop buttons next to the songs i tried to play earlier. At least it fixed temporarily. please also note that in the meantime i tried to sync my phone with the pc and suddenly its start syncing all the songs again assuming there were no songs on my iphone.  so guys i think soft reset might not help all the time but try to remember what settings you changed recently and change it back to the original option, not sure ,but it might help.

  • Button not working in browser

    I am coding a video player in Netbeans 6.8. just find two problems:
    1. the browser button not working in browser when I run the project from Netbeans under "run in browser" mode. however under "standard execution" mode, everything is fine.
    2. can not run the jar file in the project's dist directory directly. in other word, I can not run the jar file outside of Netbeans.
    I appreciate any help. thanks.
    Main.fx:
    package gui;
    import javafx.stage.Stage;
    import javafx.scene.Scene;
    import javafx.scene.paint.Color.*;
    * @author Jethro
    var face=Face{};
    function run(){
        Stage{
            title: "player"
            resizable:false
            scene: Scene{
                width:800
                height:600
                fill:DARKBLUE
                content: [face]
    }Face.fx:
    package gui;
    import javafx.scene.CustomNode;
    import javafx.scene.Group;
    import javafx.scene.Node;
    import javafx.scene.control.Button;
    import javafx.scene.layout.VBox;
    import javafx.scene.media.Media;
    import javafx.scene.media.MediaPlayer;
    import javafx.scene.media.MediaError;
    import javafx.scene.input.MouseEvent;
    import javafx.scene.media.MediaView;
    import javafx.scene.control.ProgressBar;
    * @author Jethro
    public class Face extends CustomNode {
        public var lbf=LBF{};
        public var enable=true;
        public var mark="play";
        public var sourceOfMedia:String;
        public def player=MediaPlayer {
            repeatCount:MediaPlayer.REPEAT_FOREVER
            onError:function(e:MediaError){
                var er=e.message;
         media : bind Media {
              source: sourceOfMedia
        public def view=MediaView {
                mediaPlayer:bind player
                preserveRatio: true                    
        public def bar=ProgressBar {
                height:10
                width:bind scene.width
                progress: bind
                    if(player.media !=null){
                        player.currentTime.toMillis()
                            /player.media.duration.toMillis();
                    }else{
                        0.0
        public var play=Button {      
            onMousePressed:function(e:MouseEvent){
                if(enable and player.media != null){
                            mark="pause"; println("playing...");                       
                            sourceOfMedia=lbf.uri;
                            player.play();
                            enable=false;
                }else{
                    mark="play";
                    player.pause();println("paused...");
                    enable=true;
         text: bind mark       
        public override function create(): Node {
            return Group {
                content: [
                    VBox{
                        content: [
                            lbf,
                            bar,
                            play,
                            view,
    }LBF.fx:
    package gui;
    import javafx.scene.CustomNode;
    import javafx.scene.Group;
    import javafx.scene.control.TextBox;
    import javafx.scene.layout.HBox;
    import javafx.scene.paint.Color;
    import javafx.scene.shape.Rectangle;
    import javafx.scene.text.Font;
    import javafx.scene.text.Text;
    import javafx.scene.Node;
    import javafx.geometry.HPos;
    import javafx.geometry.VPos;
    import javafx.scene.control.Button;
    import javax.swing.JFileChooser;
    * @author Jethro
    public class LBF extends CustomNode{
        public var uri:String;
        public var whereis=Text {
            fill:Color.BLUE
         font : Font {
              size: 20
         x: 10, y: 30
         content: "location: "
        public var location=TextBox{
            text:"the song's location"
            columns:40
            selectOnFocus:true
        public var browser=Button {
         text: "Browser"
         action: function() {
                    var jfc=new JFileChooser();               
              jfc.setFileSelectionMode(JFileChooser.FILES_AND_DIRECTORIES);
                    var val = jfc.showOpenDialog(null);
                    if(val == JFileChooser.APPROVE_OPTION) {                   
                        location.text = jfc.getSelectedFile().getAbsolutePath();
                        uri=jfc.getSelectedFile().toURI().toString();
                        println(location.text);
        public var face=Group {
         content: [
              Rectangle {
                        x: 0, y: 0
                        width: 800, height: 50
                        fill: Color.SILVER
                     HBox{
                         width:800
                         height:50
                         hpos:HPos.CENTER
                         vpos:VPos.CENTER
                         spacing:5
                         content: [whereis,location,browser]
        public override function create():Node{
            return face;
    }

    thanks for your reply but I need more specific operation.
    maybe I am not very clear about the problem one. I mean when I run the code in standard mode, if I click the browse button, a window will pop out and I can choose a video file from my local harddisk. but if I run it in "web start execution" mode and "run in browser" mode. the browse button make no response when I click it.
    Edited by: Phoenix2006 on Feb 8, 2010 2:35 PM
    Edited by: Phoenix2006 on Feb 8, 2010 2:37 PM
    Edited by: Phoenix2006 on Feb 8, 2010 2:42 PM

  • My iPhone will not work in landscape mode anymore, how do i get to work again

    my iPhone will not work in landscape mode anymore, how do i get to work again??

    Double click round home button then slide icon on the bottom of screen to so you go all the way to left.  There you will see a square icon with a circle arrow .  That is the screen rotation control button.  Tap on that to lock/unlock screen rotatio

  • In formcentral, why does the "proceed to checkout" button not work? on IE I get error " This content cannot be displayed in a frame...

    In formcentral, why does the "proceed to checkout" button not work? on IE I get error " This content cannot be displayed in a frame. To help protect the security of information you enter into this website, the publisher of this content does not allow it to be displayed in a frame ". On Chrome I get nothing but loading.

    Hi,
     This error is generally specific to Internet Explorer and has two possible causes. The most likely explanation is that your browser has unusual browser security settings. I would recommend you try
    resetting your security settings to defaults (varies by version but all essentially the same). You may also have to turn off
    Protected Mode which is enabled by default on some systems. If you’re seeing this error (or a version of it) outside Internet Explorer, you may have a server-level setting that is preventing your content from being framed.
    Reference:https://social.technet.microsoft.com/Forums/exchange/en-US/1460c5a5-6242-4402-9f6b-bc581bf56478/content-cannot-be-displayed-in-a-frame-when-trying-to-add-item?forum=sharepointgeneral
    Thanks,
    Eric
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Eric Tao
    TechNet Community Support

  • Frames panel: looping button not working

    Frames panel: looping button not working
    I use Fireworks MX 2004
    Frames panel: looping button:
    When I set looping to 2, it stops after 2, as it should.
    All other values, i.e. 1, 3, 4 etc will go on 'forever'.
    What's wrong?
    Thank you for your help.
    Adrian

    This is just a simple exercise.
    http://www.tudo.co.uk/testing/looping_problem.png
    http://www.tudo.co.uk/testing/looping_problem.gif
    In the png file, Frames panel, bottom left, where I can set
    looping to
    any number, including 'forever', I set the looping frequency
    in this
    case to 1. So I expect it to stop after one movement up into
    the right
    top corner and return to bottom left.
    When I play this in 'original' or in 'preview' in Fireworks,
    the
    animation moves continuously instead of stopping after one
    round. That
    is my 'problem'. Or can I not expect this to work while it is
    still in png?
    When I export it to gif, it works exactly as wanted - once
    only.
    Adrian
    Alex Mari�o wrote:
    > adrian,
    >
    > Could you post the png file online and explain exactly
    what you are
    > trying to achieve?
    >
    > alex
    >
    > adrian stock wrote:
    >
    >> Frames panel: looping button not working
    >>
    >>
    >> I use Fireworks MX 2004
    >>
    >> Frames panel: looping button:
    >>
    >> When I set looping to 2, it stops after 2, as it
    should.
    >>
    >> All other values, i.e. 1, 3, 4 etc will go on
    'forever'.
    >>
    >> What's wrong?
    >>
    >> Thank you for your help.
    >>
    >> Adrian

Maybe you are looking for