Buttons to link to Webpages

Hello there, this is my first time on this message board, so
I apologize if I am in the wrong section or anything.
Anyway, here is my problem I need help with. I'm designing a
website for a person. For the navagation bar, they wanted the
button links to have a drop down menu, which listed the links under
that category. I found out how to do something like that in
Dreamweaver, called a collapsable spry menu. The problem is, Safari
does not support that, so those button links wont work. So I was
wanting to try to create something like that using flash.
So my question is how can I make the buttons I create in
Flash link to the different webpages I create? I want it to work
like how I made it with Dreamweaver. I want to click the button,
then a menu appears directly under it, which has a couple of links
in them:
[ Button ] Clicked -----> [ Button ]
| link |
| link |
| link |
If anyone can answer that, it would be much appreciated!
Thank you!

Ikiaod2
there's so many ways to create it in flash bt d question is
how good r u in using this software? F ur a totally zero knowledge
as in novice my advise to u s to study 1st d basic of flash lke
using button, timeline, & basic animation.
Bcoz its too difficult to xplain it to a zero knowldge in
flash bt f u hve a little bit knowldge let say u van create already
a simple link button and simple animation & uknw already how to
use d timeline so i'm willing to assist u.
norman-RP

Similar Messages

  • Is there a way to create a button that links to a website?

    Is there a way to create a button that links to a website?
    I was reading up that it's possible to this with menus, and tracks but can you do it with a button and how?
    I am hoping to create a button that people viewing my discs on a computer can click on the link and their web browser will pop up and take them to a website.
    Any help is appreciated.
    Thanks.
    -Fraky

    dvd@ccess questions are being asked once a week on this forum, so I'll repeat why it's useless:
    - Mac users have to enable the feature in the preferences of DVD Player in order to for the links to work.
    - PC users have to install a small application on their PC, and they have to reboot the PC in order for the links to work.
    - On top of this, it's still unreliable, and may not work on some computers.
    It's a dog: Don't use it.

  • HT201209 Trying to redeem a free download for a song from KLove. When I get into my acct & try to redeem it, it just keeps bringing up the "sign-in" box. When I click the button on KLove's webpage to redeem it takes me to that page but does the same thing

    Trying to redeem a free download for a song from KLove. When I get into my acct & try to redeem it, it just keeps bringing up the "sign-in" box. When I click the button on KLove's webpage to redeem it takes me to that page but does the same thing

    Get the redeem code from the KLove page:
    http://www.klove.com/music/store.aspx
    ...and enter it into the Redeem Code box in the iTunes Store.
    You will have to sign in to your iTunes account.
    It worked fine here.  If that doesn't work for you, let us know what went wrong.

  • How to create text buttons that link to video?

    I've finally gotten around to trying DVD SP, and even though I read the whole manual, it's not at all clear if, or how, you can create text buttons that link to the video you want to play, without displaying a clip of that video in the button itself.
    I have no problem creating a text button, but I can't change the font, and editing is counter-intuitive, unlike iDVD. I'd use iDVD, but it doesn't accept .m2v files, and it seems to think that my 6 videos of about 43 minutes each are too large for a DVD+DL disc, so it won't let me burn it or save it as a disc image.
    Does anyone have a way out of this conundrum, or am I SOL?
    Mulder

    It really isn't that hard!
    As Drew said, go into your menu and click and drag to create a button rectangle. With the button highlighted, look in the property inspector at the bottom and type in the text that you want to use. Ensure that you 'include in button highlight' and then set the colour choice for selected and activated.
    What you get is a simple line of text which illuminates when you roll over it, and changes colour when you click on it.
    Once that is done, click on the button area again and set the target to go to the piece of video that you want to have play back.
    You should also set the menu call and end jump on that track to make sure your viewer can get back to the menu.
    Once that is done the menu will show as a simple piece of text (more buttons means more bits of text, and the first button will be highlighted by default) and no video will play until the button is activated.
    DVDSP is definitely a steeper learning curve than iDVD but for very good reasons. You get far greater control and access to far more advanced features in DVDSP. This means that some things will seem harder, whereas in fact they are just different and the process for achieving the result you want is different. Much of what you want to know is in the manual and also in the tutorials which came with the app. Failing that there are several good online spaces where you can find a lot more information... not least of which is right here, of course!

  • After doing a Google search, I click on a link and go to the searched web page.  When I go back to the Google page using the back button the links I originally clicked on no longer show as "greyed out".  Any idea what is going on with the browser?

    After doing a Google search, I click on a link and go to the searched web page.  When I go back to the Google page using the back button the links I originally clicked on no longer show as "greyed out".  Any idea what is going on with the browser?

    Type '''about:config''' in the Location (address) bar and press the "Enter" key. When you see a warning, click '''I'll be careful, I promise!''' button.
    * Preferences that have been modified are shown as '''bold (user set)'''.
    * Preferences can be '''Reset to the default''' or changed via the right-click context menu.
    -> In the '''Filter bar''', type '''browser.sessionhistory.max_entries'''
    * Right click the preference '''browser.sessionhistory.max_entries''' and click '''Modify'''
    * Change value from 0 to whatever you want over 0 (Default value is 50)
    * click OK
    -> Close the '''about:config''' tab and then Restart Firefox.
    See this post:
    * https://support.mozilla.com/en-US/questions/860894#answer-229574
    Check and tell if its working.

  • Javascript buttons and links no longer work in Firefox after latest update

    Whenever I try to use a javascript button or link, nothing happens, I just get a message in the bottom bar such as: "javascript:window.close();" telling me what the command is, but when I click on it, nothing happens. I cannot close windows in social security or in any other program using javascript. This has happened since the last upgrade to Firefox 11. I even tried completely uninstalling and reinstalling (using the Mozilla instructions to '''completely''' remove Firefox) a fresh Firefox eleven, to no avail. I made sure javascript was completely enabled in tools/options/content

    I have a similar problem like this. I dont know what the deal is but since some type of either add on upgrade or firefox upgrade i get notifications to install flash when i try to launch anything from google music. I did everything you can think of including uninstalling, reinstalling both the add on "No Script" Firefox itself, ran several diagnostic programs to ensure it wasnt any type of malware, reinstalled Adobe Flash 11, Verified Java version. I even tried to play music from google music in IE8 and that worked so its clearly Mozilla and its add ons. I disabled No Script and Google Music miraculously started working fine. This is pretty irritating considering I do everything in my power to ensure I dont get hit with any type of malware, virus, spyware, etc and No Script is definitely an Add on i like to use for that very reason since Firefox no longer supports the Norton Web Tracker add on. Any fix for this foolishness would be great, thanks!!

  • Indesign CS6 - Interactive Buttons - Destination links changing when opened on another computer

    Hi,
    I have encountered a bit of a problem with Indesign CS6.
    I have a customer who has created an multi-chapter Indesign file which has interactive buttons within the each chapter in the book. These buttons are linking to each chapter. E.G., Buttons on the first page in chapter one, might link to the first page of Chapter three. This has been done by setting a destination, to the file and specifying the page number within the Interactive elements dialogue box. The client has created an interactive PDF out of this.
    When I have opened the file on my side, all of the interactive destination elements have reverted to Page 1 of Chapter 1 in every single chapter (this is the first file in the book). Obviously, this means me relinking all of the locations again (there are over 2000 in the file that would need to be fixed).
    Now, I am opening the file on a Windows PC in Windows 7 using CS6. However, the client has created the files on a Mac. Which could potentially be an issue maybe (I am testing this).
    However, has anyone experienced this before, and is there a workaround?
    James

    Hi LoriAUC,
    Thanks for this. Very much appreciated.
    I have asked sagar-khanna from the other discussion is he knows more about the broken links etc.
    Thanks again.
    Julie :-)

  • Can't get my dropdown menu buttons to link to another scene.

    I can’t get my dropdown menu buttons to link to other scenes within the same Flash file.  The buttons are unresponsive during playback – as if no code were attached to it.  Here’s what I have as my AS2 code on the dropped button that is supposed to link to the "Published" scene/page:
    on(release){
    _root.gotoAndPlay("published", 1);
    I'm working with Actionscript 2.0 in Flash CS6.
    Any help would be appreciated!
    Thanks,
    Robert

    Hi kglab,
    I do get these compile errors:
    Scene=published, layer=Buttons, frame=1, Line 1 Statement must appear within on handler
    Scene=published, layer=Buttons, frame=1, Line 2 Statement must appear within on handler
    But, I think you are correct about the setInterval Loop.  On the home scene I’ve created a movie symbol which is set to call another swf file:
    loadMovie("frontSlideshow.swf", _root.movie1);
    This frontSlideshow.swf file has the following code in every 10 frames:
    this.stop();
    pause = function ()
                   play();
    clearInterval(pausei);
    pausei = setInterval(pause, 5000);
    This will pause the timeframe every 5 seconds before sliding to the next frame so that each image can be viewed.  It seems odd that the code from this subclass file would affect the timeframe of the main class/file where the “movie1” symbol is located.
    Best,
    Rob

  • Editing Buttons and Links in In-browser editing.

    Hey guys,
    I'm using Adobe Muse lately and it's awesome to discover this new "In-Browser" Editing feature.
    However, it seems to only work on text and images ranges, if I put a text with a link, I'll only be able to change the text,not the link.
    Futher more, if I draw out a shape(Rectangle) and set the background to a image to form a button with different states, I won't be able to alter it at all in the In-Browser editing.
    Is there a way in In-Broswer editing that I can change the HTML object(inserted), image with link(changing the link to another), text with link( changing the text and the link) and the button with link( changing link )
    Thanks!

    First of all thanks for the reply real much! Really appreciated!
    But I don't really know what you meant by "direct code editing the in context editor" and " ICE tags"
    Would it be okay if you tell me more about that?

  • Can submit buttons or links associated with post or get requests work on iPad's Adobe Reader?

    Hi,
    I'm trying to call a JSPs from a PDF file using submit buttons and links created dynamically in a Java (iText) code.
    All buttons and links work fine in my PC but no buttons or dynamically generated links work in my iPad (Adobe Reader 11.0.1).
    Could anyone please let me know in case a workaround exists for this problem?
    Thanks in advance,
    Marcelo 

    Michael,
    Thank you for your comment.
    I know it is not supported. But I’m wondering whether a workaround solution was implemented somewhere. I’m sure people are trying to submit PDF’s data or even the full documents from their iPads without sending them as an e-Mail's attachement.
    Regards,
    Marcelo

  • How to create buttons and link them to various views in Dashcode?

    I am a big noob so try to make it easy to understand. How do get a button to link to a different view in Dashcode?
    e.g.
    Button 1 would link to view 1
    Button 2 would link to view 2 and so on.

    I Worked it out!
    I just added this code which is provided in the library.
    // Set the current view of a StackLayout
    var stackLayout = document.getElementById('stackLayout').object; // Replace with id of StackLayout
    stackLayout.setCurrentView('view2'); // Replace with id of new view (or the view element itself)

  • Link inside webpage does not work.

    link inside webpage does not work ( http://ochre.lib.uchicago.edu/marathi/ ). i was able to launch a java program by clicking the link in the middle of the page in firefox 6. now it doesnt work in latest versions. link works fine in IE9

    Anyone?.

  • Is it possible we can to set button cornor link text?

    is it possible we can to set button cornor link text?

    @welcomecan,
    Your question is not clear to me ...Will you please elaborate..??
    Thanks,
    Bhasker

  • Safari underlines all links in webpages, like My Yahoo!....hard to read

    I'm a new Mac user and am used to browsing in Internet Explorer, which only underlines links on webpages when you roll your mouse over the links. I've gone through Safari preferences but can't seem to find any option for this. For me, it makes it hard to read webpages like My Yahoo! where it's all my news links set up. On lots of webpages it doesn't underline links. Any suggestions?
    24" iMac Intel Core 2 Duo   Mac OS X (10.4.8)  

    You're welcome. Glad I could help.
    Please consider marking this post "solved" to the far right of my name, next to the post "solving" your question. .
    Helpful for others looking for a solved solution to a similar question, also helpful for me.
    Aloha from Big Island.
    iMac G5 Rev C 20" 2.5gb RAM 250 gb HD/iBook G4 1.33 ghz 1.5gb RAM 40 gb HD   Mac OS X (10.4.8)   LaCie 160gb d2 HD Canon i960 printer, Airport Express (2 units)

  • Safari 7.0 - Opening wrong links on webpages

    Safari Version 7.0 (9537.71) - When I click on links on webpages like Yahoo.com, Safari is opening up a different link from that same webpage than the intended link.
    This is happening on both an iMac and MacBook Air running the new OS Mavericks.

    From the Safari menu bar, select
    Safari ▹ Preferences ▹ Extensions
    Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
    If you wish, you may be able to salvage the errant extension by uninstalling and reinstalling it. Its settings will revert to their defaults. If the extension still causes a problem, remove it permanently or refer to its developer for support.

Maybe you are looking for

  • Itunes will not read Ipod Nano...

    I just got an Ipod Nano for my Windows XP Dell Inspiron 8500. Installed the latest version of Itunes 5... and any 'latest' updated for Ipod software. (uninstalled/reinstalled SEVERAL times) Everytime I open ITunes, I get a message saying: "The softwa

  • How do I install a Globalsign certificate?

    I just do not understand the ServerAdmin Certificate management. I ordered a new DomainSSL certificate for my web server. So far so good. When I click on import certificate, ServerAdmin wants my certificate file, a private key file, a CA file (option

  • Is it possible to change the drafting standard used by Acrobat 9 Pro Extended?

    Hi All, I've seen some inconsistent behavior when converting CATIA V5R19 data to 3D PDF, specifically in regards to the appearance of PMI (3D dimensions, text, flag notes, etc) It appears that Acrobat / Adobe 3D reviewer show 3D PMI according to ISO

  • Personal LaserWriter NTR and Windows 7

    I've used the Apple Personal LaserWriter NTR with my PC running Windows 2000 Professional for years. I'm replacing the old computer with a new one running Windows 7 and would dearly love to use my beloved LW NTR with it. I know I can buy a Parallel t

  • Object link selection (Required) by user while new version creation

    Hi All, In ECC 6 While creating the new version of DIR ,SAP easy DMS is showing pop up  to select the existing object link , how can we stop this and enable to copy the existing object link in new version which working fine in SAP R/3 4.7. Regards sh