Buy my problem of camels Store Lee games possible solution for me my problem?

Buy my problem of camels Store Lee games possible solution for me my problem?

This worked for me, sort of. A while back when I downloaded that windows update that installed the new version of IE, I noticed that IE wouldn't connect to the internet and pages wouldn't load. However, I thought nothing of it because I use Firefox and FF was working just fine.
I went into IE earlier this evening (it still wasn't working) and tried to follow your recommended steps. I got up to step 4 and IE froze. I tried closing it, reopening it and repeating the steps but it would always freeze at step 4. In another thread, someone was saying that iTunes released a security update and that fixed the store for them so I tried opening Apple Software Update and that froze. I tried it several times, nothing. Would always freeze. I even tried updating thru iTunes and IT would freeze.
Finally, I went to the control panel and uninstalled IE7. The iTunes store and the Apple Software Update program are now working! So thank you very much for your suggestion. Otherwise, it may have never clicked with me that IE was the problem.
Windows XP

Similar Messages

  • Possible solution for optical drive problems

    I recently purchased a memorex cd/dvd lens cleaner at best buy and cleaned my drive with it. It now reads everything it wouldn't before. I haven't tested it but I imagine burn reliability is better too. For those that aren't having real troubles with their drive, you might try a dvd cleaner. My drive is a GWA4080MA. Disks that are now readable include TDK DVD-RW and +RW, Sony DVD+R DL, Sony DVD-R and Office Depot DVD+R DL.

    A lens cleaner brought my drive back from the dead (according to Apple) so I second that suggestion.

  • Possible solution for people having problems updating InDesign CC to 9.2.2 on Windows 7/8

    So after InDesign CC x64 (x32 version seemed fine?) giving me constant update failed errors and about four different error codes each different way I tried to fix it, I decided to find out why, like many I have been getting this in my Install log.
    FATAL: Payload 'Adobe InDesign CC x64 Application Language Files_9.2.1.101_AdobeInDesign9AppLang64-en_US 8.0.0.15 {35937D37-6FF2-1014-BDC2-9CD1656E73E4}' information not found in Media_db.
    Reinstalling via Control Panel or the CC Cleaner tool did nothing to remedy the situation and the same error kept occurring, even though CC is meant to download the language files (apparently)
    However, what I thought was odd was the fact that it references 9.2.1 not 9.2.2. It seems Adobe CC installs InDesign CC 9.2.1 from a fresh install but then fails on the 9.2.2 patch, but it seems 9.2.1 itself is either corrupted or something doesn't go right with the language packs as the error above shows.
    SOLUTION: Manually install both the 9.2.1 and 9.2.2 patches.
    Get them from here: http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html
    Both will be named setup.zip, so rename them to something like setup_9.2.1 and setup_9.2.2 and extract both zip archives.
    Install the 9.2.1 patch followed by the 9.2.2 patch, reboot and Creative Cloud should stop whining. It worked for me on Windows 8.1, open up InDesign > Help > About InDesign and check the version, it should be 9.2.2.
    PROFIT.
    Hope this works for others. Hopefully Adobe fix this in a CC app update, as this had me going in circles for a while.

    Hello,
    This solution worked for me.
    I was encountering the Error Code — U44M1P34.
    This error occurred when Creative Cloud Manager notified me of the InDesign CC 9.2.2 update.
    I tried almost everything, removing / uninstalling the program, removing / uninstalling all the programs, deleting all the left behind folders of the programs, re-downloading them from Creative Cloud Manager and even trying manually to install the 9.2.2 update.
    Thank you.
    Andreas

  • I am in Singapore.I want to buy a ipad on Apple Store online.How to apply for tax refund?

    I am in Singapore.I want to buy a ipad on Apple Store online.How to apply for tax refund?

    It is easier to get it from the Apple Reseller. They are all over Singapore.
    Alternatively, you can get it from the Apple Reseller at Terminal 3 at the airport.
    Tell them you must have the GST refund form.

  • Tried the posted solution for the RETR problem and it works once then it returns. How do you make the change permanent?

    Tried the posted solution for the RETR problem and it works once then it returns. Once the email dl'ds the file deleted per the instructions returns. How do you make the change permanent?

    Hi DOC808HI
    # I don't know what you mean by "posted RETR solution". Could you please post a link to the suggested solution? Perhaps you are referring to this thread: https://support.mozilla.org/en-US/questions/991792 ?
    # Anyhow any further troubleshooting information you can provide will be great e.g. Your Operating System Version (XP, 7, Mac OS X Mavericks), your anti-virus if any, your mail provider, your ISP, what you did, what happened with exact error message, what happened
    Cheers!
    ...Roland

  • CORRECT SOLUTION FOR THE APPSTORE PROBLEM

    CORRECT SOLUTION (by AppleTeam)
    1- Uninstall the old version of itunes you have (or just uninstall iTunes if you are already running 10.4.0.80
    2- Uninstall Quicktime also
    3- Uninstall Apple software update
    4- Uninstall Apple mobile device support
    5- Uninstall Bonjour
    6- Uninstall Apple application support
    (I would shutdown wait 20 seconds then fire up the computer at this point and then come back and install itunes)
    7- Reinstall iTunes 10.4.0.80
    Apple Tech said you HAVE to uninstall in this order. After I did this, the App Store started working correctly.

    Thanks for the recommendation of the pad. I guess it
    will deplete the battery life quicker.
    I am wonder, the heat problem, is it a APPLE's fault?
    No, as Guitaristguy313 stated, the heat problem exist in most (or all?) Core Duo laptops, whether they are Apple branded or Sony branded or Dell branded. The MacBook is not running warmer than another Core Duo based laptop.
    So it's apparently the normal operating temperature of Core Duo laptops.
    That's not too surprising considering that Intel document its Core Duo to be in normal operating temperature if the cores of the CPU don't run higher than 100°C, and 100°C is a very high temperature.
    Hopefully MacBooks Core Duo's cores generally don't run higher than 85°C, but while within specs according to Intel, it's still very high so it's not surprising that the notebook shell temperature is high also (according to a test on a website, the shell can reach 50°C when the Macbook is used intensively).
    So if you really want to have a culprit for the high temperature of the Macbook (and in fact also other Core Duo notebooks), it would be Intel.

  • Possible solution to airplay audio problem

    Fist of all, sorry for my english.
    I had the next problem, videos from itunes or youtube works fine, but when I tried to stream only audio, from ipod aplication or spotify it doesn´t work. Some times make a little noise, other times the conexion returns to the iphone or ipad...ant many times the wifi of the phone or the ipad hangs, and have to reboot...
    I´ve tried many things, with two diferent routers (both of them wireless n), different configurations, open ports, went to the genius bar, even broke a router (it hangs and there wasn´t any way to restore, even with a hard reset)...
    Finally, today it starts to work. What I did is:
    1. Change wifi channel to 9.
    2. Disable WSC setup in my router configuration.
    3. I think this is the most important: enable WMM (wifi multimedia) on the configuration of my router. It´s a comtrend model, maybe this is called in another way in other router configuration.
    4. And reset my apple tv (menu+down 5 secs).
    Probably it´s not necesary to make all these steps, looks like point 3 is the different from previous attempts...
    So check your WMM router configuration and try.
    Hope it helps.

    Intresting notes... When you download album artwork from iTunes it really doesn't add it to the MP3 track, it stores it elsewhere and assoicates it internally some how to the album. Where as adding a artwork in through the actual file will change the size of your MP3 track, by embedding the artwork into it so that other apps (like windows media) can see them.
    That would be an interesting find if that is indeed the case.... Furthermore if that solves the problem, than apple should have an easy fix on thier hands.
    However, since most of my music is direct downloads from iTunes and has the artwork directly embedded into the music files like I mentioned above that might be why I've never encountered the issues.... As I found out about this quirk a while back, because some of the tracks on the PC or on my iPod would never show the album cover before...
    Hopefully someone else with the same problem can help confirm this possible solution!

  • BSOD problems with MSI Z77A-GD80. Possible solution - enabling XMP?

    Hello all,
    I have problems with BSOD. When I play game "TrackMania2 Canyon" after some time (usually 15-30 minutes) BSOD shows with these bugcheck codes: 0x4E (0x99, 0x219CD3, 0x1, 0x1620D3).
    When I using other applicatons (MS Word 2010, Visual Studio 2010, AIMP3, Gom Player, Chrome, WaterFox) there is no BSOD. Also, I tried to play game "Trackmania United Forever" (older game than "TrackMania2 Canyon") and everithig is fine (no BSOD).
    On this post Leon says:
    Quote from: Leon on 15-August-12, 22:17:18
    Enable XMP in the bios and put the modules in the black memory slots.
    That should work.
    I've been using Corsair modules on several mainboards for some time now without issues.
    I want to try enabling XMP for my RAM (it is supported by my RAM modules) to try to solve that BSOD. What I need to do? Does it only possible in OC mode or I can enable XMP in Eco or Standard mode? I do not want overclock RAM with XMP, just to set it on 1600 MHz via XMP.
    I do not have any OC experinece (just teoreticaly). The best solution for me will be to enable XMP in Eco or Standard mode. If XMP only possible in OC mode I want other OC values to set like in standard mode.
    I tested over 5 hours all 4 RAM modules in the same time with MemTest86+ with 3 passes without any errors.
    BTW, when I logged into my Windows account, what is the most easiest way to determine in what mode Z77A-GD80 is (Eco, Standard or OC)?
    Configuration (all components are brand new) of my PC is:
    MB: MSI Z77A-GD80 (MS-7757 v1.0)
    BIOS: v1.0 (no newer versions available)
    CPU: Intel i7-3770K with Fanless CPU cooler (NoFan CR-95C)!
    VGA: Intel HD 4000
    SSD: Samsung, 830, 256GB
    RAM: Exceleram, model EBW301A, DDR3, 4 X 4GB, 1.5V
    PSU: SeaSonic X-460 fanless
    PC case: NoFan CS-80
    Windows 7 Ultimate 64b
    All drivers are the latest (I get them on September 1st 2012. from motherboard's page)
    Here are pictures Memory and SPD tabs in CPU-Z.

    Quote from: xmad on 05-September-12, 02:50:42
    You see, the problem is the bandwidth.
    Your cpu's memory controller as stated by Intel:
    Max Memory Bandwidth   25.6 GB/s (if it devide by 1000, and 25 GB/s if it devide by 1024)
    DDR 1600 memory has a peak bandwidth of 12800 mb/sec, if you multiply it out then divide by 1024 you get 50 GB/sec. This is why it is hard to oc memory, it isn't the memory, it's the memory controller. Even with 1333 it is over 41 gb/sec, which why it is sometimes nessesary to overvolt the memory and or memory controller / increase the latency to run at all!.
    A BETTER and more exact reason for this can be found here although it is based on DDR2. http://www.overclock.net/t/193449/memory-dividers-latencies-and-bandwidth-explained
    I don't know how did you calculate 50GB/s peak bandwidth of DDR3 dual channel 4 X 4GB 1600MHz but it seems too much.
    According to my calculations it is 2 X 8 X 1600 / 1024 = 25 GB/s (2 is for dual channel), witch is the value that memory controler for Intel i7-3770K was natively made for (Intel i7-3770K Memory Types: DDR3-1333/1600).
    Here is specifications for Intel i7-3770K:
    http://ark.intel.com/products/65523/Intel-Core-i7-3770K-Processor-(8M-Cache-up-to-3_90-GHz)
    I don't think that 2 kits (2 X 4GB) od DDR3 will increse bandwidth double to 2 X 25 = 50GB/s.
    Here is my AIDA64's Cache & Memory Benchmark (12.5% less than theoretical maximum for DDR3 1333MHz dual channel):

  • Temp solution for e-SATA problems...

    Had a talk with CalDigit about this and they say it should work. It's a solution for now until Apple and Sonnet and CalDigit gets their stuff together.
    Here it is:
    Use an eSATA Extender. Cost like 30 bucks.
    Here's a link where you can buy the thing:
    http://www.caldigit.com/store.asp#Accessories
    *This is only for MacPros

    Ignore this last post! I just tried this out and it doesn't work for RAIDs just yet. It might for you but not for me!
    Sorry for the mis-communication!

  • Possible solution for headphone problems with Mac Mini

    A month or two ago, I posted a question about problems I was having with getting earphones and earbuds to work with my mid-2010 Mac Mini. I just wanted to share the (quite simple) solution that solved my problem.
    My problem: I couldn't get any earphones or earbuds to work with my Mini, despite my trying several different sets. Finally I took my Mini into the local Apple store.
    Solution: Though it was not stated in any Apple support literature or postings online, the solution was to push the mini-jack into the audio out port until the mini-jack clicked. I was just being too cautious. I was pushing the mini-jacks into the port (which were in the back of the Mini, so I couldn't get a good handle on what I was doing, since the Mini's back was facing away from me). I wrongly thought I'd pushed as far as the jack(s) should go. Not so. I should have pushed harder until there was a 'click' and the mini-jack was all the way in. Once that was done, no problem.
    Chalk it up to my stupidity or to a lack of detail in Apple's support and help literature, but that was the solution.  I hope this helps others with similar audio out issues.

    Thanks for the response but I think maybe you missed part of my post.  The keyboard works fine with my mac book and with my son's macbook.  The keyboard is actually working right now.  It has been a problem with shut down and then strart up.  I think that I went through all those other SMC and PRAM efforts with Apple support and actually many others and they were completely stumped.  I think that this is a complicated problem for which there may only be a work around but I am hopeful that the next time I shut down, it will work.  I appreciate ideas but if my 4 or 5 hours with Apple support cannot help, I do not believe this is going to be a simple solution but if someone has encountered this or something similar, I would welcome their ideas.  I have gone to the Apple Store in Madison, WI on several occasions and unfortunately I often know more than the people that help me so I am reluctant to go there and to trust the staff at the genius bar.    For example, I recently purchased and Apple watch and the first person that helped me did not know how to turn it on and the second person did not know it came with two different length bands, and I once bought a case for my iphone and the person who helped me was more interested in the color than in the functionality of the case.  I could go on but I am not confident in the competence of the staff there so I am hoping that someone in the support community can help me.

  • Possible solution to book uploading problem

    I posted this as a reply to TM2 ... redundancy is sometimes very helpful ...
    I ran into the same problem in last couple of weeks ... deadline for books and all.
    I too gave up trying with Aperture and used BLUR's BookSmart, thinking that it may be a solution re overcoming problems with uploading (Aperture/Apple not providing useful solutions for me) .... but, ran into same problem - I was not able to upload finished book and got same msg re error and request to check my ISP connection, etc ... finally, I called Comcast re possibly a problem with their router or something like it ... I got very lucky and connected with someone who was very knowledgeable, pleasant, and accessible ... SOLUTION: bi-pass the Belkin 54g ... hook up CPU ethernet connection directly to cable router - BINGO! ... Belkin seems to be the potential cause for problem: It most likely needs firmware update - checked their web site and there is one available .... in time will upload it.
    Hope this helps and it is same solution for Aperture trouble's re uploading issues, etc ... Merry Christmas.
    ApB

    Intresting notes... When you download album artwork from iTunes it really doesn't add it to the MP3 track, it stores it elsewhere and assoicates it internally some how to the album. Where as adding a artwork in through the actual file will change the size of your MP3 track, by embedding the artwork into it so that other apps (like windows media) can see them.
    That would be an interesting find if that is indeed the case.... Furthermore if that solves the problem, than apple should have an easy fix on thier hands.
    However, since most of my music is direct downloads from iTunes and has the artwork directly embedded into the music files like I mentioned above that might be why I've never encountered the issues.... As I found out about this quirk a while back, because some of the tracks on the PC or on my iPod would never show the album cover before...
    Hopefully someone else with the same problem can help confirm this possible solution!

  • Does anybody have a solution for the NAT problem?

    Is somebody's application or Applet able to play any RTP stream behind a NAT Router? Can anybody establish any kind of connection / broadcasting between two subnets? I've got my RTP-Transmitter@public IP (using RTPManager...SendStream.start()), and I try to receive the stream from my local network which is behind a router (DHCP: 192.168....).
    I read forums, newsgroups, looked for any solution for days all over the web but I've found nothing. Zero.
    What's the secret? Any hints?
    Best regards from Munich / Germany,
    r.v.

    Hi
    I have the same problem.
    I have one appletTransmitter that capture video from webcam and transmit it to other client on internet.
    I try to transmit medialocator from appletTransmitter to servlet1 and then save MedialLocator as servlet attribute, then other client can connect to servlet2 that send saved MediaLocator to appletClient.
    APPLETTRANSMITTER:
    URL url=null;
    MediaLocator media=new MediaLocator("vfw://0");
    try{
    url = new URL("http://localhost:8080/servlet1");
    catch(MalformedURLException mue){mue.printStackTrace();}
    URLConnection conn=null;
    try{
    conn = url.openConnection();
    catch(IOException ioe){ioe.printStackTrace();}
    conn.setDoOutput(true);
    OutputStream os=null;
    ObjectOutputStream oos=null;
    InputStream in=null;
    ObjectInputStream iin=null;
    MediaLocator mResp=null;
    String r=null;
    try{
    os=conn.getOutputStream();
    oos=new ObjectOutputStream(os);
    oos.writeObject(media);
    //oos.writeObject("Prova Servlet");
    oos.flush();
    catch(IOException io){io.printStackTrace();}
    catch(ClassNotFoundException cn){cn.printStackTrace();}
    SERVLET1
    ObjectInputStream objin = new ObjectInputStream(request.getInputStream());
    MediaLocator ml =null;
    try{
    ml = (MediaLocator) objin.readObject();
    context.setAttribute("media",ml);
    catch(ClassNotFoundException e)
    {e.printStackTrace()}
    But on servlet1 there is a ClassNotFoundException: MediaLocator
    What do we think about the solution and exception problem?
    Best Regards,
    Nico from Italy

  • A solution for iTunes install problems

    I upgraded to the latest ver of iTunes and immediately had ALL the problems posted all over the 'net.
    The following is what worked for me.
    BACKUP!!! Set a Restore Point. Back up your REGISTRY. It is critical that you back it up beforehand and use caution while cleaning it. Please do this in case everything goes T. U.
    Remove all references to iTunes, iPod and Quick Time. There are literally thousands and you must get rid of all of them.
    Find, download, install a copy of jv16 Power Tools.
    Then:
    1. BACKUP! Set Restore Point! Back up your Registry! Did I mention backing up?
    1a. Be very careful cleaning out the Registry. Take your time. Go slowly. Make sure that what you delete is only iTunes-related. Check twice before deleting. Take. Your. Time.
    1b. The Registry is your PCs mind; do not scramble it. You will be sad.
    2. Using jv16s Software Manager, uninstall iTunes, iPod and Quick Time.
    3. Using jv16s Registry Finder, one at a time, search for and delete ALL references to iPod, iTunes, Quick Time and Apple Computer (BE CAREFUL; it will give you references to various 'applets" and "appletalk"; do NOT delete those. Only Apple Computer stuff.)
    4. Using Microsofts Search function, search for all remaining references to iTunes, iPod, Apple Computer (leave applets alone) and most importantly-Quick Time.
    5. When you are certain that everything that says Apple Computer, Apple, iPod, iTunes and Quick Time exists no more on your PC, Reboot.
    6. Go to www.old-software.com and download an old copy of iTunes. The one that finally worked for me was iTunes v 6.0.5
    7. Install an old version of iTunes. DO NOT USE THE LATEST VERSION OF iTUNES! Thats what caused the problems in the first place.
    8. Reboot.
    Even though you previously "uninstalled" iTunes, probably using the Add Remove Programs application in Control Panel, there remains behind thousands of pieces, parts and references to iTunes and Quick Time, in the Registry, TEMP files, Documents and Settings (Application Data and Local Settings), in Windows/system32 and a hundred other places. You gotta get rid of it all.
    Quick Time seems to be the main culprit, but in the end I had to get rid of all traces of all of the Apple applications before I could install again and get it to work.
    It took me 3 days to figure out this procedure but once I did, it took only an hour to do it.
    I've seen a couple other procedures recently posted here that look good. If you are uncomfortable with going into the Registry, try one of those others first.
    And fer cryin' out loud, Apple. Yank the latest version of iTunes off your site. I did a Google search for "iTunes installation problems" and came up with 700,000 hits. Do ya think you might have a problem?
      Windows XP   Try testing your upgrades before releasing them!

    Im trying your method right now, when im finished ill let you know how it worked out. I agree with your comment on apple needing to pull the latest version and get a version that actually works.

  • Cisco Solution for FXO Disconnect Problem

    I have Panasonic PBX-->FXO-->1751V------WAN-----1751V-->FXO--Panasonic PBX. I am facing a serious problem with FXO on both ends becoming busy after some few initial calls.
    What is the exact Cisco solution for this FXO disconnect problem? I have read and applied some Netpro tips for similar case but none could help.
    Can we have Cisco expert explain this??

    Hello, I think this url may be helpful:
    http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a00800ae2d1.shtml
    Regards.

  • HT1918 why am i finding it so hard to change my credit card details to buy an app from your store,iv been sat here for an hour trying and it wont except my new details

    iv tried and done everything that apple has asked to no avail,its not fort knox it should be simple enough,and i cant stress enough how annoying it is the amount of times im asked to sign in

    It only get worst when you upgrade to Lion on a 10.5 era machine.
    IMO get the 10.6 disk upgrade to 10.6.3 and nearly all your presently installed software will work, perhaps with a slight update. Software Update to 10.6.8. Stay there.
    Don't upgrade to 10.7, most all your 10.5 instlaled software will cease to function and you'll be really yelling at Apple. Also 10.7 is slower than 10.6 and really needs 4GB of RAM
    http://roaringapps.com/apps:table
    And to top it all off, 10.8 is being released in a few months, so your behind again.
    Not only that 10.8 more often that  not run on your hardware as it's too old, so what's the use?
    Another pain? Apple only supports the last two operating system versions in circulation, so your 10.5 machine is currently insecure, don't do any online banking or high value credit cards etc, sensitive information.
    Apple is committing corporate suicide to miilk as many users as possible, their market share has not increased despite all the sales increases because they simply don't care for anyone who can't replace their machines every two or three years when AppleCare expires.
    Apple is no longer a "computer company" more like a rich man's disposable computing tech-toy company.

Maybe you are looking for