* Buying Vado HD - 1st or 2nd gen? and question about pricing *

Hi.
I want to buy the Vado HD. I'm deliberating between the st and the 2nd gen. Can you help me with that?
Second question, how come the 2nd gen (that supposed to be better and newer) costs less than the st gen?! (99$ for the 2nd gen and 229$ for the st gen).
Thanks,
Adam

CRe: * Buying Vado HD - st or 2nd gen? and question about pricing *# To me the Vado Rev3 seems to be trying to get the same feature set as a digial Camera with HD recording capabilty....except the cameras take better stills. I have the below Canon and the Vado HD Rev.
http://www.amazon.com/Canon-PowerShot-SD780IS2--Stabilized-Black/dp/B00SER47Y
We don't use the vado anymore since the camera is always with us.
Factor into the price of the Canon also purchasing a highspeed 6GB sd card.
if you are really sold on a Vado...look at the comparison here:
http://www.myvado.com/products/comparison.aspx
Note how they reduced the recording time of the new models to only 4gb instead of 8gb.....however, the newer units nati'vely record to MP4 which is a little easier on some software programs than the AVI container.

Similar Messages

Itunes will not update/sync ipod shuffle (1st or 2nd gen).

Hello -- I've seen a few postings with similar issues, but no answers that work yet, so I'm hoping someone may be able to help.
Recently, I can not get itunes to sync or update either my 1st or 2nd gen shuffle. itunes sees it and diagnostics says everything is fine (although the diag program takes 5-7 mins to run). Non-shuffle ipods work fine on the same USB port. Also, the shuffles work fine on other computers.
I have deinstalled/reinstalled itunes, as well as the USB driver. I downloaded the reset utility for both shuffles and run. No difference after any of these efforts.
The problem is the same for autofill or drag/drop. itunes says not to disconnect the ipod as it's sync'ing and the little sync symbol appears next to the shuffle, but itunes just locks up ~5 mins. It returns w/o an error message, but nothing has been copied. It's the same whether I try to copy 1 or 100 songs.
Any help will be appreciated. I'll cross post in 1st gen discussion as well.
Thank you,

None of the suggested fixes in the knowledge base article you referenced resolved this issue for me. Further, I cannot use the iPod Reset Utility to restore the iPod as it is not 64-bit OS compatible.
I have been unable to sync my iPod Shuffle 2nd Gen with iTunes since the release of 8.1.1.10. The new release 8.2.0.23 has not resolved the issue. Hopefully Apple will take notice of all the problems here on the forums and release either an iTunes or firmware patch to resolve these problems.
Message was edited by: Amp300

Ipod touch 2nd gen and have ios 4.2.1. apps that will not download, higher ios version needed

I have an ipod touch 2nd gen and have ios 4.2.1. I recently tried to download some apps and received a message that said I need a higher ios version (like 4.3 or higher). I know there used to be apps that worked before but I deleted them. When I tried to re-download them again they say they won't work. Options?
Thanks
Westy

Import the older versions to the iTunes library from your computer or a backup of it, or buy a newer device, or give up.
(72621)

HT4623 i think i got the 1st or 2nd gen ipod touch how do you update it??

i think i got the 1st or 2nd gen ipod touch how do i update it?

To update
Connect the iPod to your computer and update via iTunes
iTunes 10 for Windows: Update and restore software on iPod, iPhone, or iPad
A 1G iPod can go to iOS 3.1.3
A 2G to 4.2.1. Requires iTunes version 10.X. That requires a Mac with OSX 10.5.8 or later. With 1OSX 10.4.11 you can only go to iTunes 9.X which gets you as high as iOS 4.1
Identifying iPod models

The buttons to my old iPod nano 1st or 2nd gen (I don't remember) do not respond/work. Can this be fixed??

The buttons to my old iPod nano 1st or 2nd gen (I don't remember) do not respond/work. Can this be fixed??

The Sad face icon is usually a very good indication of a hardware malfunction or failure usually with the iPod's Hard Drive, which would also explain the loud clicking noise you are hearing.
I assume you have seen this article yet?
iPod display's a sad iPod icon
If you are up for the challenge, you can also try all of the troubleshooting mentioned described by another forum member Mitch 751.
https://discussions.apple.com/thread/1193481?start=0&tstart=0
B-rock

How can i get my music off of my email to my iPod touch 2nd gen and iPod 4th gen?

How can i get my music off of my email to my iPod touch 2nd gen and iPod 4th gen?

Find an app to which you can save the attachment and which also uses file sharing
iOS: About File Sharing
or similar to get the music into your computer. Import into iTunes library and sync to the iPod. There is no direct way to get music into your iPod Music app besides purchasing from iTunes or syncing from your iTunes library
GoodReader should work but I do not think it is available for the 2G

Reset ipod touch (2nd gen) and now safari is missing. What now?

Reset ipod touch (2nd gen) and now Safari is missing. What now?

Don't despair Look at "Vintapps" in the Apple app store. It has tons of available apps for all those earlier ios devices. And you can download them right to your ios device. Many are free.
Although I wrote this 99 cent app specifically to help solve this problem, I need to add that "I may receive some form of compensation, financial or otherwise, from my recommendation or link."
Be sure to keep backups of older software. Once an app is updated, the older version is no longer available to be downloaded from Apple.

I was downloading updates for ipod touch 2nd gen and twice when I was to processing files stage it clicked off. There was no message on whether it was done or what I was to do next. I needed to reset the ipod. Now what do I do?

I was downloading updates for Ipod touch 2nd gen and when the process was to the processing files point the screen changed and I wasn't given any idea as to whether the process was complete or not and if it was what was to be done next. I needed to reset the Ipod and now I am wondering what to do . Spend another Hour downloading and whatever amount on processing files and end up where I am now . Whats the next step in finding out what to do? This was the second attempt to do this with the first try happening the same except I am not sure how long the processing files part was.. Any suggestions as to what to try will be greatly appreciated.. Thanks

Likely a batter problem since high temperatures destroy a battery. I wold make an appointment at the Genius Bar of an Apple store to see what they say. It is free except for your time.

Help! how do i know if i've got a 1st or 2nd gen nano

help!
I'd like to get my friend an fm transmitter for xmas for her nano, some say they don't work on the 2nd generation nanos, any idea how i know the difference between the 1st or 2nd gen nano?

New (2G)
Old (1G)
http://docs.info.apple.com/article.html?artnum=61688

I have a Ipod 2nd gen and i am frustrated that i cant update anymore is there anyway to get temple run some how?

Hey guys i want to donwload the original temple run for my ipod 2nd gen and it says i have to updat. But i cant update anymore so any way i can download it?

Your only way is if you have the version that was compatible on your computer such as in the recycle bin/trash or in a computer file backup. In that case delete the current version that is in your iTunes App library and replace it with the older version. Then sync.

Today i bought a preowned ipod touch 2nd gen and i restarted it so i could go on app store on my account and that so i go on settings and restart and erase everything and now it comes up with a usb pointing at the itunes logo what do i do

today i bought a preoned ipod touch 2nd gen and i restarted and erased everything so i can go on app store and that and now it just shows a picture of a usb pointing at the itunes logo what do i do

Connect the iPod to your computer and restore via iTunes
iTunes: Restoring iOS software

HT1947 Apple TV (2nd gen) and Remote App - no more connection

Since updating to the latest version of Apple TV (2nd gen) and Remote App for iPhone or iPad I can't connect any more. Worked for a short moment after restarting a few times but now no more. Must be a new bug, because it always worked before updating to iOS 5.1!
I tried with an iPhone 4S and and iPad 2.

Hi and thanks for your suggestion. Unfortunately this didn't solve the issue. I tried almost everything now:
- I rebooted the WIFI rooter
- I resettled the apple TV
- I removed the cables of apple tv for a minute (I have a switch anyway to cut power off completely)
- I killed the remote app on the iPhone and iPad a few times
- I removed my account settings both on the i-devices and apple tv for home sharing a few times and activated them again
All of the devices are in the same wifi network and every device can connect perfectly to the internet.
The screen on the iPhone/iPad always just shows that I should activate home sharing on iTunes on the computer or on the apple tv with my account (what I did as mentioned above)
Any ideas, someone from Apple maybe?
Any ideas appreciated!
Markus

Recently updated iPad 2nd gen and wooden bookcase is gone form iBook app now just a white screen

recently updated iPad 2nd gen and wooden bookcase is gone form iBook app now just a white screen

Yes, if you updated to iOS 7 you also got a new version of iBooks. The new iBooks app does not have the wooden shelf theme at all. The library has been re-styled for iOS 7 to be a plain white area listing your book or pdfs.

Hi there i have ipod touch 2nd gen and i am tryna restore it but i get error 21 with orginal fireware and 1601 with custom fireware and when it connected to itunes and i try to boot it up by restoring it white screen with lines thorugh it

hi there i ahve ipod touch 2nd gen and i am tryna restore it but get error 21 with orginal fireware and 1601 with custom firewarw and when connected it to itunes and i try to boot it by resotring it white screen with lines through it

Those errors are covered here:
http://support.apple.com/kb/TS3694

I bought a mic for my ipod touch 2nd gen and the mic works yet when its plugged in the speakers dont work, meaning i cant hear, so skype and other similar apps are un-useable, is there a way in which the mic and speakers will both work together?

I bought a mic for my ipod touch 2nd gen and the mic works yet when its plugged in the speakers dont work, meaning i cant hear, so skype and other similar apps are un-useable, is there a way in which the mic and speakers will both work together?

Looking at the details for this mic, it appears that the app has to have the option to use the internal specak when a mic is plugged into the headphone jack. Specifically:
NOTE: When MityMic is plugged into your iPod/iPhone you won’t be able to use the onboard speaker for sound output. You must remove the MityMic then play back your recordings. (The Skype app has an option to enable the onboard speaker even when the mic is plugged in, so you could use MityMic for placing Skype calls. However most other apps do not have this function.)
The above is from:
http://touchmic.com/products-page/view-all-products/touchmic-mitymic---voice-rec ording-and-interview-mic/

* Buying Vado HD - 1st or 2nd gen? and question about pricing *

Similar Messages

Maybe you are looking for