BW 7.3 Problem Activating Admin Cockpit PC 0TCT_MD_C_FULL_P01 (shadow obj.)

Hi together,
we have an BW 7.3 System and trieid to activate the administration cockpit from business content.
Went fine so far except from one process chain.
0TCT_MD_C_FULL_P01 Content Master Data
When we try to activate it we get following error messages.
Shadow object DTP_7KU36MOUFNCF0QSCQUJW97MB6 cannot be expanded; chain is inconsistent
Shadow object DTP_7KU36MOUFNCF0QSFCIHAD5VH9 cannot be expanded; chain is inconsistent
I looked at SAP Notes as well - but no luck with BW 7.3
Thank you for your help.
Kind regards,
Markus

Hi Markus,
We're facing exactly the same issue under BI_CONT 747... 
Trying to activate objects in error manually from Business Content.
(Re)Activate DataSource 0TCTIFAREA_TEXT and 0TCTAPPL_TEXT using RSA5 then Replicate and reactivate via RS_TRANSTRU_ACTIVATE_ALL.
Migrate to 7.x 0TCTIFAREA_TEXT and 0TCTAPPL_TEXT and restart the program RSTCT_ACTIVATEADMINCOCKPIT_NEW.
=> Log w/o any error.
But DTP_7KU36MOUFNCF0QSFCIHAD5VH9 and DTP_7KU36MOUFNCF0QSCQUJW97MB6 still not active and not reachable in BCT.
I have just found this SAP Note !
Note 1698234 - Report
RSTCT_ACTIVATEADMINCOCKPIT_NEW activation errors
Dispite these recommandations, the DTP_7KU36MOUFNCF0QSFCIHAD5VH9 and DTP_7KU36MOUFNCF0QSCQUJW97MB6 are missing in the BCT.
WorkAround --> Create your own DTPs and replace the bad ones in the Process Chain.
Regards,
Raphael

Similar Messages

  • BI Admin Cockpit - Problem in activating Process Chains

    Hello,
    We're trying to activate the content for BI Admin Cockpit.
    While activating the process chains, we get a "red" message as
    mentioned below.
    "Object '0PAK_5JTN7F5HTP45CGZ04PQTMCNTI' (ISIP) of type 'InfoPackage'
    is not available in version 'D'
    Message no. RSO252"
    OSS message 966131 suggests that "The InfoPackages mentioned are shadow
    InfoPackages and the message is unnecessary because there should not
    have been a search for the package at all." and we should apply the
    correction (as part of SPS10) for this purpose.
    We are currently on SP11 but still having the same issue and hence not
    able to activate the process chains for BI Admin Cockpit.
    Thanks for your help with this.
    Ashish

    Hi Ashish,
                   We had the same issue. You must have one of following:-
    BI_CONT 702, Support pack 7
    or
    BI_CONT 703, Support Pack 4
    Once you get either of above, you will not have that problem. But you might have some problem in process chains because of roll up of aggregate in delta PC. Just ignore that and you will be OK...( This problem is because there is no agg. defined and PC is trying to do roll up..which make no sense and hence there is error)
    Also refer to OSS note 965386
    This is my first answer to SDN...so assign my first points..:)
    Thanks,
    Anil

  • BI Admin Cockpit: Problems with Webtemplates

    Hi all,
    we are currently facing the following problem:
    We are on a BW system EHP1 SP5.
    We did successfully install the BW Technical Content (BW Statistics) what means that all process chains are complete and running.
    But we now got the problem that not all Web Template in the related BI Admin Cockpit are working. We, for example, only can access the DataLoad Statistics but not the Query runtimes...
    Ifi I run the content queries in RSRT, they are executing without any problem.
    So what problem do we have in this case? Is this portal based or are there wrong web templates?
    Would be also great if you could post me the technical names of all required web templates for the admin cockpit.
    Thanks in advance,
    Regards
    bivision2009

    Hi Matthew,
    Please check below 2 links. They might help you
    http://scn.sap.com/thread/3653392
    https://blogs.saphana.com/2014/01/08/new-and-improved-bw-74-on-hana-bi-41-trial-is-on-its-way/
    Thanks
    Ajay Daggubati.

  • Problem seeing the BI Admin Cockpit in the Portal

    Hello Gurus,
       I hope you may be able to help me. I would like to be able to see the BI Administration cockpit in the Portal. The Stats technical content, has been activated, ie cubes multiproviders, process chains etc and stats data collected in the cubes. The next step is now to use the BI Admin cockpit in the Portal but it does not appear in the Portal under:-
    System Administration>Monitoring
    The role SAP_BW_BI_ADMINISTRATOR has been assigned to me (user), but still I cannot see the Portal content. Please help.
    Any help offered will be gratefully received,
    many thanks,
    David

    Hi David,
    What is your  System BI 7 Fixpack and stack level..?
    Follow below steps for BI Cockpit Install and configuration.
    - Execute RSTCC_ACTIVATEADMINCOCKPIT_NEW (using Transaction RSTCC_INST_BIAC ) only   and configure as per OSS Note: 934848
    - The user should have authorization to Install BI Content S_RS_RDEMO
    - Follow steps related to BW as mentioned in OSS Note: 517484
    - CALL Transaction SIAC_PUBLISH_ALL_INTERNAL
    - Now test BI Admin Cockpit, if your having issue then follow the "
    How To ..Enabling the SAP GUI for HTML with integrated ITS on SAP NetWeaver'04" document.
    Goodluck,
    Madhu

  • Technical content activation for BI STAT and Admin cockpit

    Hi friends,
    I am going to setup the IMG call for BI STAT and Admin cockpit. If i run the technical content activation will i need a precaution for other data loading. If i run them in background does it affects other data loads. did i need to take down time for the whole system?
    After the implemntation did i need to load data for all infoproviders in quality system.

    Hello Suresh,
         I am not clear on all your questions.
    In general, technical content process chains load data similiar to other BI process chains.
    if your system is productive for a longer period already ( > 6 months ), there may be a lot of
    BI statistics data generated and this will take a longer time to load the technical content cubes during the initial load.
    Otherwise, it should not affect system performance.
    It is better to schedule them daily to avoid huge data loads.
    But these are only guidelines. It depends on your need.
    You would need to do separately for quality and production system, if you want the BI stats in those systems. This is similiar to any other Data load and cube and content in BI.
    Thanks,
    Bilal

  • Admin cockpit - Business Content Process chain Activation failure

    Hi,
    we are working in Admin cockpit in sand box server.
    we are activating the Business Content Process chain by taking all variants (begin with 0TCT) but we are getting the error message that Process AND has no predecessor.
    Could you kindly suggest any thing to move further.
    Thanks & Regards,
    Shaliny. M
    Edited by: shaliny mega on Mar 19, 2008 7:04 AM

    Hi shaliny,
    As mentioned in this post
    https://www.sdn.sap.com/irj/sdn/forums.
    Have u collected the Source system for which ur collecting the PC when u r activating Business conent?
    Collect the source system when u  r activating the PC. Give a try.
    if it is useful assign points.
    Regards,
    Senthil

  • BI Admin Cockpit for InfoPackage

    Hi SAP Gurus,
    I have installed BI Admin Cockpit on BI 7.0 using SP13.
    I executed one Info Package for testing purpose.  I am comparing the data populated in 0TCT_MC23 that with the monitor tab.  I observed that the data doesn't get populated in 0TCT_MC23 as expected.
    Searched on Service.maketplace and found few SAP notes (1024908, 991093, 1001880, 1014146) which asks for implementing SP11 / SP13 as a resolution to the problem.  However we are already on SP13.
    Can anyone let me know the solution for this problem?
    Awaiting your reply.
    Regards,
    Amanda.

    Check any default filters in infopack
    Check infoobjects newly used in this present flow with the infoobject used in 0BWTC_C05 . Any mismatch in the mapping or non active status of any infoobject can be checked

  • BI Admin Cockpit: Program variant missing in Process chain

    Hi,
    I'm installing BI Admin Cockpit and have troubles with Process chains. I followed the installatin guide and had problems activating process chains: 0TCT_C2_INIT_P01 and 0TCT_MD_C_FULL_P01 because of missing InfoPackages. I solved this by installing an correction as it is described by Note: 1432353. After this I activate these Process chains manually in RSA1 Administration--> BI Content -->Process Chains (all necessary objects). No Problems occured. The Problem is when I'm start these Process chains, I get an error on the last step. There is an Abap Programm with an variant. This variant is missing in the System.
    The Variants are:
    - RSTCC_Dataload (0TCT_C2_INIT_P01)
    - RSTCC_QRuntime (0TCT_MD_C_FULL_P01)
    I tried also to get these Process chains with Dataflow before and after to view if I forgot anything to activate, but there is no programm variant. Can anybody explain, how to get these programm variants?
    Thanks and greetings,
    Sebastian

    Sebastian,
    I faced the same problem. Basically what I found was that variants were not defined. So I manually created the value for variants:
    1. For RSTCC_DATALOAD assign value  TCT_C2_DELTA_P01
    2. For RSTCC_QRUNTIME  assign value   0TCT_C0_DELTA_P01
    Our system info is similar to what you have and I in fact had Basis team patch BI Cont to level 6 but this did not help. If I were to take a guess i would have to say that these variants are missing in the 7.01 BI version, you can either choose to create a OSS message with SAP and wait for them to fix it or you could fix it manually.

  • To install BI Stats cube in 7.0 - BI Admin Cockpit necessary?

    Hi Guys,
    Just curious to know, to install BI Stats cube (0TCT*) in BI 7.0, is installation of BI Administration Cockpit necessary? We would like to install BI Stats cube from Business content and start collecting Stats.
    Did anybody face problems activating BI stats cube in BI 7.0?
    Abhijit
    Edited by: ABHIJIT TEMBHEKAR on Nov 12, 2008 1:44 PM

    Its the reverse, To have BI Admin Cockpit, BI Stats cubes (0TCT*) are necessary!!
    VJ

  • Error BRAIN 276 when you execute a Web template in BI Admin Cockpit in  EP

    Hi Experts,
    I have Installed BI Administration Business Packages in Portal and configured necessary steps in BI System.I have assigned the role in Portal and BI System.
    I tried executing one iview...and was getting the following error:
    Error loading template 0TPLI_0TCT_MCA1_Q0143
    and when i click on the above error ..i was getting another window which shows below message:
    Technical Information for Message:
    Error loading template 0TPLI_0TCT_MCA1_Q0143
      Notification Number BRAIN 276
    I was suggested by SAP Note 1014795 to do the below changes :
    TEMPLATE_ID=0TPLI_0TCT_MCA1_Q0143  To TEMPLATE=0TPLI_0TCT_MCA1_Q0143
    Please note that the above note says to replace  TEMPLATE_ID  by TEMPLATE in the property of "BEX Web application Query String" of the IView in Portal
    and also please note that i have Version=SAP BW 2.X/3.X in Iview Property .
    After having made the above changes iam getting the BEX Web Analyzer...where i have the options to open a query ( from all the infoareas of BI System).and then i will select the query (0TCT_MCA1_Q0143) and am executing the same to display the data.
    i know that this Is not the correct way of executing the iview for BI Admin Cockpit.
    Can anyone help me how to execute the Web Template automatically when the user clicks on IView ?
    we have all the above Web Templates Corresponding to BI admin cockpit in active mode in when checked from WAD 3.X , but when when i search for the above web templates in WAD 7.0 i do not find them
    Is there anything that i need to activate in BI System ? Or in Portal System?
    Or do i have to execute the above web templates in  BI WAD before linking them to portal iviews?
    Do we have to Migrate the Web Templates from  BW 3.5 to BI 7.O?
    Thanks
    P.Navakanth
    -When i try to execute the web templates

    We are having this exact same issue - example of one of the errors:: Error loading template 0TPLI_0TCT_MCA1_Q0114.  We get this error for all MCA1 templates.  Basis says they've deployed latest BP BI Administration 1.0 with Patch 2 (BPBIADMINOSP_2-1000342B.SCA).The info refers to BI Admin Cockpit, Business Package for BI Administration,
    BP BI ADMINISTRATION 1.0 ,BI Usage Statistics,0TCT_CA1.
    I see from documentationthat the multicube 0TCT_MCA1 is from 0TCT_CA1 and 0TCT_VCA1
    From the documentation in http://help.sap.com/saphelp_nw70/helpdata/en/26/9ef41d14dc424183b4807538be8e1e/frameset.htm, under web templates,
    1) How come there are more than 1 template with same name and Query with same names- for example:
    Web Template: Long-Term Trends in Total Runtimes of BI Applications
    WebTemplate: 0TPLI_0TCT_MC01_Q0114
    This Web template is the container for the query 0TCT_MC01_Q0114 and is designed to provide detailed analyses.
    AND
    Web Template: Long-Term Trends in Total Runtimes of BI Applications
    WebTemplate: 0TPLI_0TCT_MCA1_Q0114
    This Web template is the container for the query 0TCT_MCA1_Q0114 and is used for detailed analyses
    2) How come the delivered process chains load other technical content, but does not load 0TCT_CA1
    Basis re-deployed the bi admin cockpit contents, but still have error in loading template 0TPLI_0TCT_MCA1_Q0114.
    3) Do we need to do any of the following?
    SE38 u2013 run RSTCC_ACTIVATEADMINCOCKPIT_NEW
    RSA1 - bi content, install & transport
    Check role SAP_BI_BW_ADMINSTRATOR
    Se38 u2013 rs_template_maintain for active templates u2013 look for MCA1 templated
    Tr code RSDDSTAT
    Activate Virtual providers
    Anything else?
    Thanks!

  • BI Admin Cockpit - include queries in the portal

    Hello Everyone,
    We have recently installed the BI admin cockpit and try now to set up the portal dashboard.
    In the portal under BI Administration > Business Intelligence on the left you have "Data Load Status", "Data Load Statistics" etc.
    When we select for example 'Process chain statistics' under "data Load Statistics" there are two windows/ iviews coming up on the right. Now we have to select a web template/query/workbook to see the content and graphic.
    But when we log on to the portal again all made settings are gone and we have to include web template/query/workbook again to see the content and graphic.
    Does anyone know how to set up the dashboard in a way that all selected web template/query/workbook will be there the next time when logging in to portal?
    Thank you very much for your help.

    Hello,
    Sometimes these kinds of problems can happen if there is some problems with the customizing,
    can you check that everything is configured correctly using the support desk tool, please see the information in the SAP note 937697.
    Kind Regards,
    Des

  • RRI not working for calling up transaction BI admin cockpit

    Hi,
    We have implemented BI admin cockpit and all technical contents and settings are OK, but when we try to navigate to call any transaction (Monitor, Process status TCode ST22, RSA1, RSMO, RSPC etc) by calling RRI than instead of getting the desired transaction screen we are getting the SAP Easy Access screen. Although we can navigate to Second level web template thru RRI and if we define target system other that BI (i.e. ECC or CRM) than we are able to navigate any transaction transaction i.e. SE38 or SE37 etc,
    Any suggestion or help would be appriciated.
    thanks
    Dev

    Hi Sunny,
    as per your reply i have check the BI usage types using that URL.
    And the below is the result.
    Information about Active Usage Types
    Active Usage Types
    Product                     UT Code      Short Name      Description           
    NetWeaver                  BI                  BI Java      BI Java           
    NetWeaver                 AS                 AS Java      Application Server Java           
    NetWeaver                  DI                          DI      Development Infrastructure           
    NetWeaver                 EPC                      EP Core       Enterprise Portal Core Components           
    NetWeaver                     EP                           EP      Enterprise Portal           
    Can you please help.
    Thanks
    AS

  • IViews not loading correctly - BI Admin Cockpit

    Hi All,
    I recently installed the BI Admin cockpit on the portal and having some problem with the iViews. When I access the cockpit from the BI Administration link, the reports don't seem to load but instead just the empty standard web template is displayed in place of all reports.
    1. I checked the iViews preview and they are working fine. No problems with any of the queries/web templates. They are all working correctly.
    2. When I select option to Open report in new window, it still loads a empty web template. BUT, when I refresh that link in Internet explorer the report loads correctly!   (refresh option from the frame menu did not help)
    I didn't understand this behavior and looking for some help/guidance. Any inputs are appreciated.
    Thanks & Regards,
    Sree

    Hi.
    The solution for your issue according to BI Admin Cockpit page refresh and Iview not displayed in web Portal is SAP note 972514.
    Best regards,
    Aliaksandr

  • BI Admin Cockpit - 0TCT_MD_C_FULL_P01 has Inactive Infopackages

    Hi SDN,
    Basis recently installed BI Admin cockpit for BI Statistics.  I am running test loads using the process chains. 
    The Process chain Content Master Data (0TCT_MD_C_FULL_P01) is displaying as inactive.  When i go into change mode, I notice that 4 infopackages are red (inactive).  Here are the displaying error messages:
    -Process variant LOADING 0PAK_BFYU3MMMU2T2WOI50MXHCEH07 does not exist in version A
    -InfoPackage  no longer exists in object version A in table RSLDPIO
    -Variant '0PAK_BFYU3MMMU2T2WOI50MXHCEH07' of process type 'LOADING' not found in A version
    How do I correct these errors?  Do I have to go into table RSLDPIO and edit the table entries for the InfoPackage or do I need to reactive these Infopackages from BIC (RSA1->BIC)?  I also see that there are notes 834280, 1069134, and 1008758 which deal with BI Admin Cockpick installation.
    Thanks!

    Hi Markus,
    We're facing exactly the same issue under BI_CONT 747... 
    Trying to activate objects in error manually from Business Content.
    (Re)Activate DataSource 0TCTIFAREA_TEXT and 0TCTAPPL_TEXT using RSA5 then Replicate and reactivate via RS_TRANSTRU_ACTIVATE_ALL.
    Migrate to 7.x 0TCTIFAREA_TEXT and 0TCTAPPL_TEXT and restart the program RSTCT_ACTIVATEADMINCOCKPIT_NEW.
    => Log w/o any error.
    But DTP_7KU36MOUFNCF0QSFCIHAD5VH9 and DTP_7KU36MOUFNCF0QSCQUJW97MB6 still not active and not reachable in BCT.
    I have just found this SAP Note !
    Note 1698234 - Report
    RSTCT_ACTIVATEADMINCOCKPIT_NEW activation errors
    Dispite these recommandations, the DTP_7KU36MOUFNCF0QSFCIHAD5VH9 and DTP_7KU36MOUFNCF0QSCQUJW97MB6 are missing in the BCT.
    WorkAround --> Create your own DTPs and replace the bad ones in the Process Chain.
    Regards,
    Raphael

  • BI Admin Cockpit process chains fail to install

    Hi All,
    I'm attempting to install and configure the BI Admin Cockpit on our BI Development system.
    I've followed the steps outlined in the collective note, 965386.
    When running transaction rstcc_inst_biac to install the Content for the BI Admin Cockpit, the background job RSTCC_ACTIVATE_ADMIN_COCKPIT cancelled with error message RS 062.
    Regarding this, instructions from note 1039381 were used to clear table entries and I re-ran the job, this time successfully.
    Checking slg1, the logs show no errors and only minor warnings and it can be seen via RSA1 that some Technical Content is in the Activated state.
    However, when entering transaction RSPC to schedule the process chains, the screen is blank and it appears that the associated chains have not been installed.
    Regarding this, note 1065249 has been checked:
    <i>'This note needs to be applied only if SP level of software component BI_CONT is less than SP7 and SAP_BW is greater than or equal to SP13.'</i>
    Our system is currently at the required SP levels, BW13 and BI_CONT SP7.
    Any ideas on how to install the process chains would be very welcome.
    Chris

    I was able to install BI Admin Cockpit recently after multiple attempts. All process chains installed properly. There are still some minor issues but in general I was able to see the BI Stats reports. Here is the steps that I did:
    System Info: SAP_BW     700     13, BI_CONT     703     5
    1. Note 934848: Select only myself system in the TX:RSOR Source System
    2. Note 834280: Installing technical BI Content after upgrade
    3. Apply OSS note: 1039381, 1065249, 1044792
    4. Note 965386: Activate tech content in IMG (SPRO) sequentially from Activate SAPI Data Sources ... to Activate Technical Content. Activating it sequentially will help identify which step is failing.
    5. Activate Process Chains using txn RSOR Technical Content (0TCT*).
    The process chains were installed but failed to be activated. Whe I double click on a process chain nothing was displayed but edit the process chain anyway and activate manually.
    Good luck.
    Tony

Maybe you are looking for