BW Analysis authorization issue on cost center range

Hello BIW security experts
I have a problem where I created an analysis authorization on a cost center range and it looks like the interval is not working. The report is just a list of cost centers (demo to users to prove that analysis authorizations work in order to skip 2 managerial cost centers.
. Cost centers are numeric. Example: 2000100. In the drop down list they appear as such.
. I want to have the following cost center range: 1000000 to 1000771, 1000773 to 2000771, 2000773 to 9999999.
Thereofore 1000772 and 2000772 should not appear in the list.
. In the analysis authorization I have put the 3 ranges above on 3 separate lines. 'BT' is the operator. The cost centers have been selected from the drop down list.
Results: I get only 1 record from the report.... 2000772. (which is one I want to exclude..
Steps tried to debug:
. When I put a list of cost centers in the analysis authorization on separate line with the 'EQ' operator, then the report works.
. I tried putting ' ' delimiters since cost center is a char field but it fails.
. I tried adding leading and trailing zeros to fill up the char(10) but no luck.
. I tried creating a hierarchy with the interval and put it in the hierachy auth. tab and it does not work either. It gives the same number of records than the first step.
. A hierarchy with single values work.
I do not know what else to try..
Thanks.
YB.

Good morning
Here it is from RSECVAL
ZCC_TEST     0COSTCENTER                    I       BT        1000000                                                      1000771
ZCC_TEST     0COSTCENTER                    I       BT        1000773                                                      2000771
ZCC_TEST     0COSTCENTER                    I       BT        2000773                                                      9999999
ZCC_TEST     0COSTCENTER                    I       EQ        #
ZCC_TEST     0COSTCENTER                    I       EQ        :
ZCC_TEST     0INFOPROV                         I       CP        *
ZCC_TEST     0TCAACTVT                        I       EQ        03
ZCC_TEST     0TCAIPROV                         I       CP        *
ZCC_TEST     0TCAKYFNM                       I       CP        *
Thank you for your help.

Similar Messages

BW report authorization for restrict cost center

dear all,
i have problem on BW report authorization for restrict cost center.....when i execute the query, after selection screen, appear error message 'you cannot change zv_cctr for characteristic 0COSTCENTER during query'.
note : zv_cctr is variable restriction for costcenter, type processing = customer exit.
below the customer exit :
WHEN 'ZV_CCTR'.
    IF i_step = 2.
      DATA : gt_mstuidvscc TYPE TABLE OF ztbw_mstuidvscc,
             gs_mstuidvscc TYPE ztbw_mstuidvscc,
             wa_final2(10) TYPE c.
      SELECT * FROM ztbw_mstuidvscc INTO CORRESPONDING FIELDS OF TABLE gt_mstuidvscc
        WHERE userid = 'sy-uname'.
      LOOP AT gt_mstuidvscc INTO gs_mstuidvscc.
        wa_final2 = gs_mstuidvscc-kostl.
        l_s_range-opt = 'EQ'.
        l_s_range-high = wa_final2.
        APPEND l_s_range TO e_t_range.
      ENDLOOP.
    ENDIF.
Regards,
Tony

i defined variable as ready for input and mandatory.
regards,
Tony

BI 7.0 Analysis Authorization issue: some reports displaying a blank page.

Hi All,
This is regarding BI 7.0 Analysis Authorization issue.
Overview:
we have restricted some queries at infoobject level.
Issue:
a. For some of the queries, we can see the selection screen but when we try to execute the query by clicking on the execute button (Queries WAD) we get a blank page, meaning nothing is displayed on the output (white/Blank screen).
b. When we execute the same query through RSRT, we get a message which says "Disconnecting from BW server..".
c. Let me explain further on this. Basically we are doing this in order to have limited access to Auditors at the client side. At the same time normal users should not get impacted due to this, hence we created two roles. One for normal users and other for Auditors.
d. Now the thing is that we execute the same report with normal user ID's the report executes properly and displays the output. it does not show the blank page.
e. But when we execute the same report with Auditors ID then we get a blank page.
Any idea why this is so?

Hi Neha,
I tried the below also,
GL Acnt
I EQ 0000134010
I EQ :
but still it didn't work.
No Infoobject is missing in Authorization Object.
For your point, "rsecadmin - > analysis -> execute as -> check for the desired user & analyze the log" it didnu2019t allow me to analyze, since as soon as click on execute button a pop-up comes up saying "Disconnecting from the BW server..."
As mentioned earlier also it is giving me the below message,
""I>> Row: 103 Inc: AUTHORITY_02 Prog: CL_RSR_RRK0_AUTHORIZATION RS_EXCEPTION 301CL_RSR_RRK0_AUTHORIZATION AUTHORITY_02"
Kindly suggest, since this is a show-stopper for us!
Thanks,
Ishdeep Kohli.

Batch not determined in MIGO-Goods Issue for cost center

Hi,
We are using Batch Determination while posting Goods Issue to cost center. However, when we enter * in the batch field system does not propose the batches.
We have done following settngs
Strategy type ME01 which is SAP standard
Batch search procedure - ME0001
Search procedure ME0001 is assigned to movement type 201 in "Allocate IM Search Procedure/Activate Check"
Sort Rule - 01 using charecterstics (ascending)
Class - BATCH_MASTER created
Characterstics - Size, Shape, Color (No table or field are maintained in Addional Data) assigned to this class.
Material is maintained with classification and batch management active.
Master Data - Search Strategy is maintained using t code MBC1 for stratefy type ME01 (Key combination Movement Type/Plant/Material). Selection criteria - Values maintained for characterstics. Sort Rule - 01
Now when we are issuing goods to cost center and enter * in batch field, system is supposed to suggest the batches (material is in stock and batches are available). However, system does not give pop up.
Am I missing something? Where is the batch determination button as system is giving message to use button?
Shekhar

Thank you for the answer.
It gives only one batch and not all the batches. Why it could be?
Shekhar

How to get cost center ranges for a given company and division...

Hello Experts,
Is there a table, BAPI or FM that can get the company or division of a given cost center?
Currently I am creating cost center ranges in my program but that is not the best way to do it
since they can always add or delete cost centers. Just like in transaction OKEON wherein you
can see the cost center ranges for a given company or division.
Hope you can help me guys. Thank you and take care!

Hi Viray,
You can try BAPI 'BAPI_COSTCENTER_GETDETAIL1'.
You need to pass controlling area and cost center detail to this BAPI.
It will return the cost center detail in return.
Hope this helps you.
Thanks,
Arun

Good issues to cost center with extra charges 10% from cost

Hiii Guy,
My user would like to charge the cost center 10% from cost when good issues to cost center is perform,
can we do it in sap ?

The scenario is like this,
Only Merchandise Department have the authority to ordering merchandise item from vendor, when other depart required that merchandise item, Merchandise depart will perform GI to that requested cost center.
So Merchandise Depart would like to have extra charge on there extra work.

Setting the cost center ranges in BD21

Hi All
The BD21 transaction code is used for transfer the data between the two system by change pointer.
is it possible to setting the cost center ranges In BD21 transaction code.
Please Confirm
Thanks & Regards
K.Gunasekar.

Hi All
I am planning to schedule the COSMAS report in background mode by using Varient.
is it possible to setting the cost center message type COSMAS varient ranges In BD21 .
Thanks & Regards
K.Gunasekar.

Authorization Object for Cost center

Hi Experts;
We are using SRM 7, classic scenario.
We are copying SRM tcode: BBP_BW_SC4 to a Z report and modify it. The users will be given the access to display the status of thier SC.
How can I restrict the user from displaying the SC of other department's? Is there an authorization object for cost center in SRM? is there any other away to restrict the users from displaying SC related to other depts.
Appreciate your help

by the way, why are you not using the standard SAP powl queries? they anyways restrict you from viewing others SCs except your team
any ways, if you are copying that report this BBP_BW_SC4, then change this
PARAMETERS pa_coce TYPE kostl OBLIGATORY DEFAULT lv_costcenter.
to
PARAMETERS pa_coce TYPE kostl OBLIGATORY DEFAULT lv_costcenter no-display.
Edited by: Soumyaprakash Mishra on Jan 31, 2012 3:48 PM

BI-IP Authorizations: Accessing own Cost Center only

Hi,
We are currently implementing BI-IP in our company. We have created the ready-input templates and we are prepared for roll-out.
There is still one concern though which I haven't resolved. I am currently looking for an AUTHORIZATION that will let users access their respective COST CENTERS only. For example, if I am part of the Marketing Group, then I will only be able to access the budget of my respective cost center.
Can anyone lead me to the right AUTHORIZATION OBJECT in BI-IP to implement this restriction.
Your reply is much appreciated. Thanks.
Regards,
Ramon

Hi Ramon,
authorizations for transaction data in BI (and therefore in BI-IP) are not based on authorization objects. You have to make the cost center InfoObject authorization relevant and then create so called Analysis Authorizations for it. Please see the online help:
http://help.sap.com/saphelp_nw70/helpdata/en/66/019441b8972e7be10000000a1550b0/frameset.htm
BTW, you can upload the cost center authorizations from SAP R/3 or ERP.
http://help.sap.com/saphelp_nw70/helpdata/en/59/fd8b41b5b3b45fe10000000a1550b0/frameset.htm
Regards,
Marc
SAP NetWeaver RIG

Adding cost center range in KS05

Hi,
I want to add range for cost center field and from change Date in KS05. Can anyone
guide me on this issue.
Orelse If there is any function module to achieve this keeping select-options in KS05
by preparing our own report also will be helpful for me.
Regards
VEnk@
Edited by: Venkat Reddy on Nov 18, 2009 12:49 PM

Hi, Venkat!
I haven't found any standard transaction for mass handling of changedocs, but i suppose there is something universal tool for this purpose in the system. I think it is not difficult task to realize it yourself. Check this code please:
program zjdtest.
tables: RKMAA.
select-options: so_kostl for RKMAA-KOSTL obligatory.
parameters    : p_kokrs type RKMAA-KOKRS obligatory.
data: lt_objclass type CDOBJECTCL_RANGE_TAB,
      lt_objid    type CDOBJECTV_RANGE_TAB,
      ls_objid    type CDOBJECTV_RANGE,
      lt_tabname type CDTABNAME_RANGE_TAB,
      lt_editpos type TABLE OF CDRED.
start-of-selection.
append 'IEQKOSTL' to lt_objclass.
append 'IEQCSKSB' to lt_tabname.
loop at so_kostl.
    ls_objid-sign       = so_kostl-sign.
    ls_objid-option     = so_kostl-option.
    ls_objid-low+4(10) = so_kostl-low.
    ls_objid-high+4(10) = so_kostl-high.
    ls_objid-low(4) = ls_objid-high(4) = p_kokrs.
    append ls_objid to lt_objid.
endloop.
   CALL FUNCTION 'CHANGEDOCUMENT_READ_RANGES'
      EXPORTING
        objectclass_tab                  = lt_objclass
        OBJECTID_TAB                     = lt_objid
        TABLENAME_TAB                    = lt_tabname
      tables
        editpos                          = lt_editpos
      EXCEPTIONS
        NO_POSITION_FOUND                = 1
        WRONG_ACCESS_TO_ARCHIVE          = 2
        TIME_ZONE_CONVERSION_ERROR       = 3
        OTHERS                           = 4
    IF sy-subrc <> 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    CALL FUNCTION 'CHANGEDOCUMENT_DISPLAY'
      EXPORTING
        i_applicationid                = sy-cprog
      tables
        i_cdred                        = lt_editpos.

Analysis Authorization Issue

Hi:
I created an analysis authorization ZCO_CODE to trstrict it by a company code.
I added following objects in authorization with values.
0COMP_CODE = 1000
0TCAACTVT = 03
0TCAIFAREA = *
0TCAIPROV = *
0TCAVALID = *
Then I created a role Z:00:BW_REPORT, where I added following authorization objects S_RS_AUTH and restricted it by value ZCO_CODE. Then I assigned this role to a user test01.
When I execute a program RSEC_MIGRATION for this specific user, I do not see authorization object ZCO_CODE on 2nd step of this program. Any Idea Why? I think this object should show up as I want to migrate this specific object.
Help will be appreciated.

Hi Sachin:
Okay here is my issue.
I have a Reporting authorization Object created earlier which is ZCOCODE. I though I'll have to create a new Analysis authorization object e.g. ZCO_CODE and then restrict it with other chars. as mentioned in Marc Bernards presentation and then you have to migrate it.
In selection list I can see old Reporting authorization object. If I select it and use option "Enhance existing profile" then It will update profile and not role? right....
How can I see whether it has updated existing profile?????
Do I need to create new Analysis Auth. for Company code or I can use old Reporting authorization for company code?
For testing purpose, I created a test user and assigned all reporting roles but It will not show up in RSEC_MIGRATION step???

Where do I define the automatic posting of goods issue to Cost Center?

Dear Experts,
I found out that all the raw material consumed each time I do the confirmation of process order via CORK did not post to Cost Center.
Where do I define the automatic posting to Cost Center for Goods issue for consumption?
regards,
Abraham

Hi,
I found out the default movement type has been predefined to 261 (GI for Order, in which it doesn't post to Cost Center). I guess the standard system has a valid reason to set it as 261 instead of 201 (GI for cost center).
As far as I understand, the Process order will accumulate all the costs (direct cost - material, labour and machine hour and also indirect cost) during the confirmation (material is backflushed and fnished goods is auto-GR). And at the end of the period, this process order will be settled its variance if there is (between the total cost credited - based on standard cost of the finished goods and actual total accumulated costs debited).
So, my question is, by right should there be any CO posting being made to Cost Center for material consumption in the above process flow as I checked in the standard system, the material movement for raw material and finished goods have no Cost Center posting at all?
regards,
Abraham

Reservation should be created only within the mentioned cost center range.

Dear All,
For IW31 t-code System should allow to create the Reservation of Insurance spares for the plant say "X" with cost center say 1 to 10.
Means system should not allow to create the reservation other than these cost centers.
is ter any standard way we can control this.
kindly guide me in this regard.
Regards,
santosh.

OK - I get it. In short - you want the material component to be entered on the order component screen (which by the way technically creates an item in a reservation) - but you don't want this material component to be relevant for issue (and probably not relevant for MRP planning).
If that is it - then if follows that you want to ensure that the field AUDISP is always set to never for this material in the component screen, subject to your cost centre criteria..
I don't know any user exits / BAdIs off the top of my head that can be used to achieve this in PM. I'll have a look - perhaps someone else might be able to make a suggestion?..
Edited by: Andrew Barnard on Feb 27, 2012 10:04 PM

Issue with Cost center in PO and Work Order

Dear Expert,
I am facing an issue with respect to cost center in Purchase Order and Work Order. The PO is made against a work order. There are two cost center associated with the work order. One is updated under u201CAdditional datau201D field and other is at u201Clocationu201D . So the cost center in PO should essentially be the same one mentioned under u2018locationu2019 field of work order. So the issue here is that while creating PO, the cost center is picked from the u201Cadditional datau201D field of work order not from u2018locationu2019 field of WO.
Is there any exit available that needs to be implemented for overriding the cost center in PO or any other way of solving this problem?
Thanks in advance.
Thanks
Deba

Hi,
I guess that there is already some user exit or enhancement in place, since this doesn't sound like standard SAP (picking the cost data from additional data, or even having it there).
Mario

Goods Issue for Cost Center 201 : special stock E not supported

Dear guru ,
I need to run a goods issue(trx.MIGO) for cost center using movement type 201 for a material
in special stock E (with sales order and sales order item).
The system send this message : special stock E not supported.
How can it solved this problem ?
Thanks in advance.

first tranfer stock from Sales Stock to Own stock as follows
Tcode - MB1B / MIGO
Mvt type - 411 E Transfer posting sales order to own
Then issue this own stock to Cost center as follows
Tcode - MB1A / MIGO
Mvt type - 201
hope it helps]
Regards,
Rahul

BW Analysis authorization issue on cost center range

Similar Messages

Maybe you are looking for