BW Analysis authorizations issue in BO Webi Report

Dear All,
I have one webi report which is on BEx Query-universe.
Query has 6 authorization variables with ready for input(optional).
User has authorizations for all 6 fields.
But when we execute the webi report it is throwing error message  like" query do not retrive data"
One of the  6 authorization fields has only few values , when we give " * " to this field the user can able to execute the report.
Could  anybody tell me what is need be done here
regards
mhreddy

Hi!
Probabily the combination of authoriztions funcions are executing considering "and".
See your configuration to considerer "or".
Test one by one.
bye

Similar Messages

  • BI 7.0 Analysis Authorization issue: some reports displaying a blank page.

    Hi All,
    This is regarding BI 7.0 Analysis Authorization issue.
    Overview:
    we have restricted some queries at infoobject level.
    Issue:
    a. For some of the queries, we can see the selection screen but when we try to execute the query by clicking on the execute button (Queries WAD) we get a blank page, meaning nothing is displayed on the output (white/Blank screen).
    b. When we execute the same query through RSRT, we get a message which says "Disconnecting from BW server..".
    c. Let me explain further on this. Basically we are doing this in order to have limited access to Auditors at the client side. At the same time normal users should not get impacted due to this, hence we created two roles. One for normal users and other for Auditors.
    d.  Now the thing is that we execute the same report with normal user ID's the report executes properly and displays the output. it does not show the blank page.
    e. But when we execute the same report with Auditors ID then we get a blank page.
    Any idea why this is so?

    Hi Neha,
    I tried the below also,
    GL Acnt
    I EQ 0000134010
    I EQ :
    but still it didn't work.
    No Infoobject is missing in Authorization Object.
    For your point, "rsecadmin - > analysis -> execute as -> check for the desired user & analyze the log" it didnu2019t allow me to analyze, since as soon as click on execute button a pop-up comes up saying "Disconnecting from the BW server..."
    As mentioned earlier also it is giving me the below message,
    ""I>> Row: 103 Inc: AUTHORITY_02 Prog: CL_RSR_RRK0_AUTHORIZATION                                                                       RS_EXCEPTION        301CL_RSR_RRK0_AUTHORIZATION                         AUTHORITY_02"
    Kindly suggest, since this is a show-stopper for us!
    Thanks,
    Ishdeep Kohli.

  • Analysis Authorization Issue

    Hi:
    I created an analysis authorization ZCO_CODE to trstrict it by a company code.
    I added following objects in authorization with values.
    0COMP_CODE = 1000
    0TCAACTVT = 03
    0TCAIFAREA = *
    0TCAIPROV = *
    0TCAVALID = *
    Then I created a role Z:00:BW_REPORT, where I added following authorization objects S_RS_AUTH and restricted it by value ZCO_CODE. Then I assigned this role to a user test01.
    When I execute a program RSEC_MIGRATION for this specific user, I do not see authorization object ZCO_CODE on 2nd step of this program. Any Idea Why? I think this object should show up as I want to migrate this specific object.
    Help will be appreciated.

    Hi Sachin:
    Okay here is my issue.
    I have a Reporting authorization Object created earlier which is ZCOCODE. I though I'll have to create a new Analysis authorization object e.g. ZCO_CODE and then restrict it with other chars. as mentioned in Marc Bernards presentation and then you have to migrate it.
    In selection list I can see old Reporting authorization object. If I select it and use option "Enhance existing profile" then It will update profile and not role? right....
    How can I see whether it has updated existing profile?????
    Do I need to create new Analysis Auth. for Company code or I can use old Reporting authorization for company code?
    For testing purpose, I created a test user and assigned all reporting roles but It will not show up in RSEC_MIGRATION step???

  • Analysis Authorization Issue 7.3

    Hello Friends,
    System BW 7.3, Currently there are 80 odd analysis authorization objects
    We want to introduce a new info object (GL Account) to be authorization relevant, ( there are few objects in the system which are already authorization relevant in the system with proper analysis authorization objects and they are working fine)
    Things done, made the GL Account object authorization relevant in RSA1, Created 2 analysis authorization objects with GL Account and TCT objects and one with hierarchy restrictions and one open access.
    Added this object to the user in addition to its already existing authorization objects. Created authorization variable in BEx.
    Some how the authorization is not picked up and it gives us all the values in the report. But if I add the GL Account info object to the existing analysis authorization objects then it works fine.
    I do not want to change all the existing analysis authorization objects to add GL Account.
    Your inputs are most welcome.
    Thanks
    Ed.

    Gajesh- I have added the new analysis authorization object to the user in RSECadmin.
    Subhendu- Problem statement: What are the steps involved in making a new info object(GL Account) authorization relevant. Authorizations are given at hierarchy level. Can we create a new analysis authorization with  GL Account only or do we have to add it to every existing analysis authorization
    I have done the following steps
    1. Made the GL Account object authorization relevant in RSA1,
    2. Created 2 new analysis authorization objects with GL Account ( with hierarchy restrictions) and TCT objects and one with GL Account open access.
    3. Added this object ( which has restrictions) to the user in RSECADMIN, in addition to its already existing authorization objects.
    4. Created authorization variable in BEx.
    5. No existing analysis authorization objects have been changed.
    When I test the report, It does not restrict based on the hierarchy that I have given, it gives open access.
    But If I add GL Account with restrictions to the existing analysis authorization object, it works good.
    Guess I am missing some thing here.
    Do you need any other screen shots.
    Thanks
    Ed.

  • BW Analysis authorization issue on cost center range

    Hello BIW security experts
    I have a problem where I created an analysis authorization on a cost center range and it looks like the interval is not working. The report is just a list of cost centers (demo to users to prove that analysis authorizations work in order to skip 2 managerial cost centers.
    . Cost centers are numeric. Example:  2000100. In the drop down list they appear as such.
    . I want to have the following cost center range: 1000000 to 1000771, 1000773 to 2000771, 2000773 to 9999999.
    Thereofore 1000772  and 2000772 should not appear in the list.
    . In the analysis authorization I have put the 3 ranges above on 3 separate lines. 'BT' is the operator. The cost centers have been selected from the drop down list.
    Results:  I get only 1 record from the report....  2000772. (which is one I want to exclude..
    Steps tried to debug:
    . When I put a list of cost centers in the analysis authorization on separate line with the 'EQ' operator, then the report works.
    . I tried putting ' ' delimiters since cost center is a char field but it fails.
    . I tried adding leading and trailing zeros to fill up the char(10) but no luck.
    . I tried creating a hierarchy with the interval and put it in the hierachy auth. tab and it does not work either. It gives the same number of records than the first step.
    . A hierarchy with single values work.
    I do not know what else to try..
    Thanks.
    YB.

    Good morning
    Here it is from RSECVAL
    ZCC_TEST     0COSTCENTER                    I       BT        1000000                                                      1000771
    ZCC_TEST     0COSTCENTER                    I       BT        1000773                                                      2000771
    ZCC_TEST     0COSTCENTER                    I       BT        2000773                                                      9999999
    ZCC_TEST     0COSTCENTER                    I       EQ        #
    ZCC_TEST     0COSTCENTER                    I       EQ        :
    ZCC_TEST     0INFOPROV                         I       CP        *
    ZCC_TEST     0TCAACTVT                        I       EQ        03
    ZCC_TEST     0TCAIPROV                         I       CP        *
    ZCC_TEST     0TCAKYFNM                       I       CP        *
    Thank you for your help.

  • BW Analysis authorization issue... need help urgently....

    We have one BW query which is pulling data from Contract Division info-object. Now this report does not variable selection object so it is pulling data from all values of Contract Division. Values of  Contract Division are CNC, CNS, CNE and CNL.
    Now we have created an analysis auth. object called z_es_3 and added Contract division info-object. Now we have added that z_es_3 into role and given value to CNS. now when we are running report, we are getting No Authorization error. When we are giving * value in z_es_3, it is running fine.
    Now we have to restrict report to contract division. please help.
    Thanks in advance

    Are you running unrestricted search on Contract division in your queries? You should restrict it to value which is maintained in the authorization for the InfoObject.
    Also please run the analysis authorization trace from RSECADMIN. That will give you a clearer picture of what is wrong.

  • Cells merge issue when extracting webi report in excel format

    Hi Experts,
    We have some WEBI reports in BO XI 3.1.
    The reports have header where we are showing report name and some values which user selects in prompt.
    Now the issue is that when we save our webi report in excel format, many cells get merge.
    I have read many post on scn which suggest some solutions like changing the autofit width option to no and aligning the header width with colums.
    Tried both the option but no success.
    Is there any other way to achieve this.
    Thanks in advance,
    Regards,
    Rishabh

    Hi,
    We managed to find the workaround for this merge cell issue.
    Sharing it might be helpful for someone.
    - Align the report name and other block in report in such a way that the ends are in line with the end point of any column. The only limitation is that when applying pivot to the excel output we neet to click on any of the ccolumn so that excel identify the data set.
    - Second workaround is to break the webi document in two parts report1 will contain the report name and the block to show the prompt values selected by the user where as report2 will contain the table withactual data. The only limitation with this workaround is that when exporting the repot output to excel we will get two tabs in the excel sheet one containing the prompt values and secont tab containing the actual data.
    Regards,
    RS

  • Issue while opening webi reports using OpenDoc url in Chrome browser

    Hi
    We are in SAP BI4.0 SP7. We are facing weird issue while opening the webi report via OpenDoc url in chrome. we are facing the below issue only in chrome and it works perfectly in IE and Firefox.
    For the first time the report gets opened properly(when a session is created). If we try to open the same report from the same machine in a different browser tab, report gets opened up without any Tables\charts. We could see only a blank page with just the Report Tab name at the bottom. If we do refresh on the page, the report opens up correctly. We have checked for packet drops and there is no such thing. Is there any setting that we should make to resolve this. Your help is appreciated.
    thanks
    Gokul

    Hello Gokul,
    first thing is to check is if your chrome version is supported by your current BO version as specified in the PAM (is it?). If the chrome version is supported, and you still have an issue, then you can check with a sap support engineer.
    best regards,
    Victor

  • Authorization Issue while running a report

    Hi Experts,
    We are facing strange issue in authorizations while runnung a report. When we givel '*' company code access to the users they are able to run the report. When we give one single company code specific access to the users they get error message : No Authorization or everything filtered Out".
    Please let me know how can i debug the same.
    Company code specific access along with sales grp, profit ctr, sales employee are maintained in a ODS in BW.
    Thanks
    Gaurav

    Hi,
    When you use authorization relevant char in your report, you should create a  variable of type authorization.
    The variable input may be mandatory or optional.
    By doing this, the default values will pop-up in the variable input screen when the user tries to execute the report.. It is also relevant to mention that the user cannot enter any blank values for the authorization variables unless he/she got * access for that particular character.
    Also do not hardcode any values for  authorization relevant char inthe report.
    It will throw error No Authorization.
    Guru.

  • Transport issue of a WEBI report?

    Hi,
    I have created on webi report with name "Sales Details Per Year" and transported to Quality system from Development. but, after few days due to some reasons i have deleted this report in development system and created a new report with the same name "Sales details Per Year". when i am transporting this webi report into quality system it is not able to transport because of same name.
    kindly help me how can i overcome this? is there any overwrite option is available in promotion management ?
    Thanks

    Hi Krishna, We had the option in import wizard to match either name or uid but in Promotion management (BI 4) we dont have the option ,it matches both.
    The other way to open the report in rich client in dev and save as the report in QA but this require the access rights to rich client.

  • Analysis Authorizations Issue (BI 7.0)

    Dear Colleagues,
    I have a question regarding BI 7.0 Authorizations. What happens when a cube is created from an Infoprovider in which Company Code (to use an example) is marked as authorizations relevant, but that infobject is not used. That is, the cube gets data from that Infoprovider, but the data retrieved has nothing to do with Company Code. When a query is created from this cube, will the user be required to have authorizations for the company code of the information he's retrieving or will she/he be able to see all the information?
    Thanks in advance for your help.
    Best regards,
    CMPT

    Hello,
    I think I understand your question?
    If you have characteristic company code marked as authorization relevant...
    You have two basic info cubes, one with company code A and one without company code B.
    You have a multi cube combining characteristics from both basic cubes (including company code).
    If you execute a query written against the multi cube but extracts data only from basic cube B (without company code), will you need to have an analysis authorization with company code defined?
    If this is your question, then Yes, you do need to define company code in the authorization (assigning value # should be sufficient).
    KR
    Andy

  • Authorization Issue to display BI Report

    Dear Expert
    We upgraded CRM (from 4.0 to 2007) and BI (to 7.0). I'd like to display a standard BI report from CRM WebClient. But I click on the link, I get the following error: User does not have the proper authorizations.
    But I have SAP_ALL in both systems...
    Thanks in advance
    Stephanie

    Were you able to solve this problem, becuase I am also geting same problem?

  • Authorization issue on Inventory Status Report!

    Dear All,
    One particular user is already authorized to access "inventory Status Report" .Moreover, Inventory Status Report's window is opened when he clicks but after pressing OK button the following messages comes [You are not permitted to perform this action  [Message 200-30]].
    Please advise me....

    Hi,
    As suggested above, re-post it as a question thread. You need to close your old open thread too.
    Thanks,
    Gordon

  • Need analysis authorization help

    Hello Gurus,
    Could someone please help me out with my Analysis Authorization issue?
    We have a BW query and workbook outputting "Tcode usage" like the following:
    UserGroup| Username| Tcodename| Frequency
    This one has been running long time without any problems in reporting authorization, but now We want to get it restricted and only allow data associated group HR to display using new Analysis authorization. The scenario for this report is as follows:
    1. Rsecadmin >Maintenance> Create New authorization "Group" which consists of 4 characteristics: 0TCAACTVT, 0TCAIPROV, 0TCAVALID and 0TCTUSRGRP(which is the characteristic about group name and already authorizatio relevant). Set 0TCTUSRGRP "EQ HR".
    2.Assigned this authorization to a role using PFCG through the S_RS_AUTH. Other authorization objects in this role are:   S_BDS_D, S_BDS_DS, S_RS_MPRO, S_RSEC, S_RS_COMP, S_RS_COMP1, S_RS_HIER, S_RS_ICUBE, S_RS_ODSO.
    3.In BEx analyzer, set type: Characteristic Values and Variable filled from authorization and value "Selection Option". Unselected "ready for input". Put the characteristic associated with group name to filter windown on the top righ hand side of the Query Designer. Also compare users in PFCG.
    The question is the I still get all data about all groups. Looks like the authorization group doesn't work. I  used the "execute as " and get no errors back.
    Note: I didn't use "generation" to create the new authorization in Rsecadmin
    Thank you very much for any answers!
    Haifeng

    I guess i have found the reason why my authorization dosen't work. I don't activate infoObjects 0TCA* and 0TCT* and infoCubes 0TCA* as well. But another thing I am confused about is :
    Should I activate HR and CO businees content for authorizations 0TCA_DS02OTCA_DS05 and 0CCA_O010CCA_O03 before i get started? or should i run generation everytime i create a new authorization using Maintenance in Rsecadmin?
    Haifeng

  • Webi report gives old data in infoview on refresh

    Hi Experts,
    We are facing this strange issue on a webi report after some data updation in the SAP BW infocube.
    The webi report is based on the universe which is connected to an infocube in our BW dev system. After some data updation in the cube, we had tested the report in webi rich client and everything was working fine (the newly updated data from cube was reflecting). Now, we had tested the same report in infoview, but it was showing the old data only. We had tried exporting the report once again to infoview, refreshed universe structure; but without any success.
    What appeared to be even more strange was that the last refresh time was also not changing. While running the report in the infoview it hardly takes 40secs. But on refreshing it says the last refresh time was 5mins.
    Any help on this would be highly appreciated.
    Regards,
    Arun.

    it sounds like when you refresh report in Infoview you get the cached data, it never goes to the DB to fetch new one...
    You'll need to enable traces on webi processing server as well as SOFA/MDX tracing and review log files to see if requests are going to db or not and what is being returned.
    It could be at webi proc level or at your BW level.
    You can also try disabling webi caching in webi proc server properties and see what happens.

Maybe you are looking for

  • Vendor evaluation in purchase order (vendor unknown)

    Hi! I created 2 new evaluation criteria for vendor evaluation. When i go to tcode ME25 "create PO vendor unknown", I assign the source of suplly and click on "vendor evaluation" my 2 new criterias do not appear in the "Ranking list of vendors". Any i

  • [SOLVED]fsck fails on bootup due to other hdd name

    Hi, is set up arch today on an initially 2 hdd sys ... after it was set up and the files i wanted to keep were moved to the hdd which would remain, i disconnected one hdd  .. (i had to change grub/menu.lst   sdb1 ---> sda1 due to this disconnect) unf

  • Create a view

    Hi I want to create a view with the latest start date Thanks in advance regards anna create table staff (staff_id number ,person_name varchar2(10) ,dept_id number ,start_date date insert into staff values (10, 'Alan', 100, '01-Dec-2000'); insert into

  • Consider Adobe design software mergence to eliminate design workflow confusion

    Hello! Recently, I start to use Adobe Indesign to design print material, then I found it is much superior than Adobe Illustrator from some aspects(such as functionality,typography,long document,dynamic and organic text style,table,crossmedia and etc.

  • SharePoint 2013 get Term's "other label" to text column

    Hi, does anyone now how to do or has anyone done following with SharePoint 2013. What we would need to happen is when user selects value from managed metadata (the main label) then the terms synonym/other label would be stored to text field. So lets