BW extraction settings for Billing Data from SAP ISU SYSTEM
Hi dudes,
iam currently extracting data from sap isu to bw systesm,but even after generation of many billingmaster dats i dnt find nay record to be extracted in bw system since some settings are missing in isu suystem for extarction process of Biliiing data,
Kindy help me in this regarding the settings to be made for succesful extraction from isu to bw
kr
raj
Dear Mr Memminger,
unfortunatly I was not able to find any hint about the same issue. As we have closed the FI-key we are waiting for any entry in RSA7. With RSA3 we get results but there are no entries in Delta Queue.
What I was surprised about is the fact that in SM58 there are some tRFC-entries for function module MEREP_DELTABO and target MAM_MI. That looks like error in delta handling. Although my colleague told me that is the integration to Mobile Asset Management and hence has nothing to do with the Delta handling problem.
But could give me a hint where to find the configuration setting for Delta queueing ?
Best regards,
Peter von Schubert
Edited by: Peter von Schubert on Jun 29, 2009 10:17 PM
Similar Messages
-
Set up for Extraction the data from SAP ECC system
Hi!
I would like to analyze the transaction and master data from SAP ECC system into SAP BI system.
I have created the connection (entry for SAP ECC system) within SAP NetWeaver System.
Unfortunately when I try to load the transaction data for Info source the process does not end successfully.
There are no information within SM58 on source system.
The ST22 does not contain some suitable information.
Question:
Which settings do I miss and how can solve my problem?
(user authorization, etc.)
Thank you very much!
regards
HolgerHi!
many thanks for your reply.
The error I get:
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source
Can you please help me to identify the error?
Thank you! -
Loading of transaction data from SAP ECC system failed
Hi!
I successfully connected SAP ECC system to SAP BI system.
The following steps have been executed:
- user ALEREMOTE with max. authorization
- RFC destination
- Distributing Data model
- Generated Partner profile
- Maintaining message types in WE20
Now when I try to load any data from SAP ECC system the loading process in hanging in status "yellow" and never comletes.
[0FI_AR_4|http://www.file-upload.net/view-1447743/0FI_AR_4.jpg.html]
The following steps within Load process are yellow:
Extraction (messages): Missing messages
Missing message: Request received
Missing message: Number of sent records
Missing message: Selection completed
Transfer (IDocs and TRFC): Missing messages or warnings
Request IDoc : Application document posted (is green)
Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished
Info IDoc 1 : sent, not arrived ; Data passed to port OK
Info IDoc 2 : sent, not arrived ; Data passed to port OK
Info IDoc 3 : sent, not arrived ; Data passed to port OK
Info IDoc 4 : sent, not arrived ; Data passed to port OK
Subseq. processing (messages) : Missing messages
Missing message: Subseq. processing completed
DataStore Activation (Change Log) : not yet activated
Question:
Can some one give me some technical steps (tcode, report) to solve this problem?
Thank you very much!
HolgerHi!
Many thanks for your answer.
Via BD87 on BW system I detect that all the IDOC's (type: RSRQST) will be received from SAP ECC system.
Via tcode SM58 I could not detect any entries.
However the loading status from yesterday is set to "red".
The errors are:
Extraction (messages): Missing messages
Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished
Info IDoc 1 : sent, not arrived ; Data passed to port OK
Info IDoc 2 : sent, not arrived ; Data passed to port OK
Can you investigate my issue again?
Thank you very much! -
Business scenairo for transfering data from Non Sourace system.
Hi everyone,
i am looking for sample business scenario for transferring data from non source system.
If the case study is for any Financial system that will be even great.
if any one has good Document Please Fwd it to e-mail [email protected]hi rk,
what you means to say something source like flat file, not from r/3 side.
or
what exactly you want,plz explain?
regards,
San!
if helped,assign point! -
Table Technical settings for transfer data from developemnt to Quality
Hi All,
Please let me know which table techinical settings required for to transport table with data from development to quality?
Thanks & Regards,
padmaja.Hi,
You do not require technical settings to transport data from dvlpmnt to quality.
However, you can transport any tables entries with a simple trick:
(1) Create a workbench request
(2) Change the request (or its task) and add the following entry: R3TR TABU <name of table> =>
(3) Enter the key values you want to transport, e.g.:
- <client>* for all entries of the current client
- add additional restrictions for the table entry (<client><bukrs>* for all entries of a given company code)
Best regards,
Prashant -
Demo - Extraction of Customer Master Data from SAP R/3 ECC6 to MDM5.5
Hello,
I am new to MDM . Would appreciate if someone can give a solution to the below request.
We are doing a demo project in our Company to extract all the master data related to SALES cycle. We are doing an extraction of Customer Master Data. Currently we have the unlicensed version of MDM and very soon we will get the licensed version.
We have the Customer Master Repository created in MDM Console. The IDOC type we are using is DEBMDM05.
Is there a easy way to map the fields of IDOC to the MDM Repository. Right now we are doing a manual process of comparing the IDOC fields and MDM Repo in an excel but this is tedious and time consuming.
Can anyone suggest an easier way to identify so that we know which fields match correctly.
Thanks
LeenaHi Leena,
First of all you have 2 options to generate IDOCs from SAP R/3 system
1.mdmgx>one IDoc per record
2.mdm_clnt_extr>for generating single IDoc having entire set of records.
Secondly,if you want to get the data mapped automatically,you should use standard maps provided by SAP(Business Content).
If at all you have created new fields then you should manually map those fields.
If any other queries pl ask
Reward points if found useful
Regards,
Pramod. -
Tools for migrating data from SAP DB2 to Oracle
HI, someone please help regarding the topic mentioned above. Is there any tools that I can use to migrate the DB2 to Oracle
Please help me
Thanks
-jebatcoThis is a very specialized area you are looking at. My recommendation is that you look at SAP sites on Oracle.com for assistance. There is also a SAP Migration white paper you can read and the Oracle/SAP site.
Regards
Sue -
Budget Data from SAP R/3 CO
Matez,
Does there exist standard Business Content Extractors to extract the Budgetted / Planned data from SAP CO module to SAP BW ?Hi all,
We have company code with currency IDR and controlling area currency as INR.
While allocating the budget in CJ30, my client wants to see all the figures in IDR i.e. the budget currency as well as assigned/exhausted amount in IDR.
Now, I changed the budget currency to object currency (IDR) in Budget profile in OK02 and its working fine. But still the exhausted / assigned figures are continued to be in INR as the Availability control was set at Controlling area currency level i.e. at INR
Now, when I am trying to set the availability control at object currency level (IDR), it is giving a warning message that Availability check can only control the budget if the transactional currency is same as object currency. Even then I saved the setting.
Now the Budget control check is not available on Capital Import Pos where the Transaction currency is not the same as object currency i.e. not in IDR.
Pls suggest me if there is any way out for this.
Thanks a lot. -
Webservice:get data from SAP ECC
hi,
i want webservice.that webservice will fetch the data from sap ecc system.
i need steps for creating webservice.i have some functionality .what can i expose as webservice.
thanks
rajHi Raj,
If we trying to fetch data from SAP ECC system then expsoing as a web service from NWDS (Netweaver Developer studio ) would the best option.First we need to create a Portal Service that invokes the functionalities of the SAP application component( Business solution which uses ECC) using the SAP Java Connector. Then you can create a Web Service from the Portal Service.
If your SAP application component runs on SAP Web Application Server (WebAS) 6.20 or later, then you can directly enable Web Services on the application component by using the application server's native Web Service capabilities.
1. To turn on the WebAS 6.20 SOAP Processor, you need to:
Configure the Internet Communication Framework (ICF) of the WebAS to start the Internet Communication Manager (ICM) and activate the HTTP protocol support
Use transaction SICF to activate the SOAP Runtime Handler: default_host -> sap -> bc -> soap -> rfc.
Once the SOAP Processor is turned on, the RFM-implemented Web Services can be invoked at http://<host_name>:<port_number>/sap/bc/soap/rfc
6.20 also provides a Web Service Browser, which is a BSP web application that can be used to browse all RFM-implemented Web Services in the system, and generate WSDLs for these Web Services.
2. In a WebAS 6.40-based SAP application component, such as SAP Enterprise Core Component (ECC) 5.0, or a WebAS 7.0-based application component, such as ECC 6.0, by default, few Web Services are pre-delivered by SAP. But it is pretty easy to create Web Services in a WebAS 6.40-based system.
Inside-Out Approach: if within the SAP application component there already exist one or several RFMs or BAPIs that suit your needs, you can create Web Services based on them without any additional programming. The basic steps include:
Using the Service Definition Wizard, which can be started from transaction SE80, SE37, or BAPI, to create a (Web) service definition from an RFM, a function group, or a BAPI.
When creating the service, you have the option to rename or hide operations (methods) and parameters, define default values for parameters, and changing parameter types.
After the service definition is created, you need to use transaction WSCONFIG to release the service definition for the SOAP runtime.
Afterwards, by using transaction WSADMIN, you can for any released Web Service, call the Web service homepage which provides utilities for using and testing the Web Service, generate WDSL, configure the logging and tracing settings, and publish the Web Service as a Business Service in an UDDI registry.
Hope these steps are helful to you.
Regards,
Shaila -
Data connection from SAP-R3 System to Xcelsius using Web Services
Hello Everybody,
Anyone tryed connecting data from SAP-R3 System to Xcelsius using Webservices? (created in ABAP function module)
SDN downloaded document says to Generate Webservice URL through ABAP (by creating function module) and import it in xcelsius
Data -> Add Web service connections
by giving the URL to import. After giving the web server login credentials, the error says 'Unable to load URL'
Any idea would be great help
Note: I tried by following the thread & its not working:
http://forums.sdn.sap.com/thread.jspa?threadID=1520321
Thank you,
Anand
Edited by: Anand Amirtharaj on Feb 20, 2012 7:51 AM
Edited by: Anand Amirtharaj on Feb 20, 2012 7:53 AMHi,
With regards to your statemetn "SDN downloaded document says to Generate Webservice URL through ABAP" <- can you tell me more please? references/links/attachment?
As far as I am aware, that the type of web service required for integration it a 'normal' Netweaver Web app server web service.
There are limitations about the complexity of the WSDL - see Notes:
1653655 - Limitations in Web Service WSDL URL usage in Xcelsius 4.0
1703839 - Limitations of Web service usage in Xcelsius / Dashboard Design
also , changes between SAP versions requires reworking the WSDL
Note 1625091 - The WSDL URL for web service which generated in SAP Enterprise Central Component cannot be loaded into Xcelsius
regards,
H -
FICA -IDOC for posting the billing data from NON-SAP ISU system
Hi,
Kindly note we are implementing NON-SAP ISU with SAP FICA for the finance implementation. In this context, we ahve identified BAPI for BP and CA. We have decided to go for transaction posting through the transaction FPE1. For this, we are looking for the transaction data IDOC which is CTRACDOCUMENT_ACCOUNT (FICA Posting) in the WEDI. But it seems that it is not yet released. Can anybody help me out for this to either identify the equivalent IDOC or other method to post the data from Banner system (NON-SAP ISU ) system. We are presently not implmenting billing system in SAP ISU, but only FI systemHi,
you can create the same...
but normal practice what we do is create swc for each system so that it is easy to maintain and easy to extend in the future..
or else follow some conventions if you are just starting the things..
HTH
Rajesh -
Looking for SAP solution to extract data from the production system
Hello,
we are looking for the SAP standard tool to extract data from the production system and copy it to the development system. It should be as functional as some kind of partial client copy. The data, which we need to replicate is master and transactional data from FI, CO, AA MM and nice to have FS-RI modules. There is a product offered by the IntelliCorp called "Data Management" but we would like to know if SAP offers its own product.
Kind regards,
Krzysztof MurkowskiHi,
SAP offers a solution called 'Test Data migration Server' or TDMS.
You can access the master guide from the below link:
https://service.sap.com/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700006332942006E
Cheers !!
Satya.
PS: Pls reward points if the answer was helpful...Thx. -
CC 5.2 Alert Generation - Not extracting any data from SAP
Hi there,
We are trying to use the alert function for critical transactions in CC 5.2. We have set the relevant parameters in CC. The Alert_Log.txt is created successfully but it is not extracting any data from SAP. Is there any settings that I am missing here, both in R/3 and CC 5.2? I really appreciate your help. Below is the Alert_Log.txt for your review.
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob scheduleJob
FINEST: Analysis Daemon started background Job ID:41 (Daemon ID D:\usr\sap\CC1\DVEBMGS00\j2ee\cluster\server0\. Thread ID 0)
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob scheduleJob
INFO: -
Scheduling Job =>41----
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.BgJob run
INFO: --- Starting Job ID:41 (GENERATE_ALERT) - AlertGeneration_Testing
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.BgJob setStatus
INFO: Job ID: 41 Status: Running
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.BgJob updateJobHistory
FINEST: --- @@@@@@@@@@@ Updating the Job History -
1@@Msg is AlertGeneration_Testing started
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.dao.BgJobHistoryDAO insert
INFO:
Background Job History: job id=41, status=1, message=AlertGeneration_Testing started
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.BgJob alertGen
INFO: @@@ Alert Generation Started @@@
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.BgJob alertGen
INFO: @@@ Conflict Risk Input has 1 records @@@
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.BgJob alertGen
INFO: @@@ Critical Risk Input has 1 records @@@
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.BgJob alertGen
INFO: @@@ Mitigation Monitor Control Input has 1 records @@@
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface alertGenerate
INFO: @@@@@ Backend Access Interface execution has been started @@@@@
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface alertGenerate
INFO: @@System=>R3
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface alertGenerate
INFO:
No of Records Inserted in ALTCDLOG =>0 For System =>R3
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface append_TcodeLogFile
INFO: *********SOD Tcode Size=>0**************
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface append_TcodeLogFile
INFO: *********Alert Tcode Log File=>D:\cc_alert_log\cc_alert_log1.txt is created**************
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface alertGenerate
INFO:
File Output Log File Size ==>0----
For System =>R3
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface alertGenerate
INFO: -
Conf Last Run Date=>2007-12-12--Conf Last Run Time=>12:45:11--
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface alertGenerate
INFO: ==$$$===Notif Current Date=>2007-12-20==$$$==Notif Current Time=>14:27:32===$$$===
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface send_AlertNotification
INFO: ****************** send Notification Alert Type=>1
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface send_AlertNotification
INFO: ******Alert Notification=>CONFALERTNOTIF==LastRunDate:=>2007-12-20==LastRunTime:=>00:00:00==Curr Date=>2007-12-20==Curr Time=>14:27:32*********
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface send_AlertNotification
INFO: ****************** send Notification Alert Type=>2
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface send_AlertNotification
INFO: ******Alert Notification=>CRITALERTNOTIF==LastRunDate:=>2007-12-20==LastRunTime:=>00:00:00==Curr Date=>2007-12-20==Curr Time=>14:27:32*********
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface send_AlertNotification
INFO: ****************** send Notification Alert Type=>3
Dec 20, 2007 2:27:32 PM com.virsa.cc.comp.BackendAccessInterface send_AlertNotification
INFO: ******Alert Notification=>MITALERTNOTIF==LastRunDate:=>2007-12-20==LastRunTime:=>00:00:00==Curr Date=>2007-12-20==Curr Time=>14:27:32*********
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.mgmbground.dao.AlertStats execute
INFO: Start AlertStats.............
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.mgmbground.dao.AlertStats execute
INFO: start:Sat Dec 01 14:27:32 CST 2007
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.mgmbground.dao.AlertStats execute
INFO: now:Thu Dec 20 14:27:32 CST 2007
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.mgmbground.dao.AlertStats execute
INFO: end: Tue Jan 01 14:27:32 CST 2008
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.mgmbground.dao.AlertStats execute
INFO: Month 2007/12
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.BgJob alertGen
INFO: @@@=== Alert Generation Completed Successfully!===@@@
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.BgJob setStatus
INFO: Job ID: 41 Status: Complete
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.BgJob updateJobHistory
FINEST: --- @@@@@@@@@@@ Updating the Job History -
0@@Msg is Job Completed successfully
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.bg.dao.BgJobHistoryDAO insert
INFO:
Background Job History: job id=41, status=0, message=Job Completed successfully
Dec 20, 2007 2:27:32 PM com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob scheduleJob
INFO: -
Complted Job =>41----Hi,
we have ran into similar issue of alert log being not displayed accurately in CC 4.0 version and we implemented the Note 1044393 - CC5.1 Alerts, it did work for us, as you are using CC5.2, I would recommend you to check the code and then try this note. But iam still skeptical whether this note will be helpful to you or not.
Thanks,
Kavitha -
How to extract Inventory data from SAP R/3 system
Hi friends How to extract Inventory data from SAP R/3 system? What are report we may expect from the Inventory?
Hi,
Inventory management
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/how%20to%20handle%20inventory%20management%20scenarios.pdf
How to Handle Inventory Management Scenarios in BW (NW2004)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Loading of Cube
ref.to page 18 in "Upgrade and Migration Aspects for BI in SAP NetWeaver 2004s" paper
http://www.sapfinug.fi/downloads/2007/bi02/BI_upgrade_migration.pdf
Non-Cumulative Values / Stock Handling
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/93ed1695-0501-0010-b7a9-d4cc4ef26d31
Non-Cumulatives
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/da1640dc88e769e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62ebe07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62f8e07211d2acb80000e829fbfe/frameset.htm
Here you will find all the Inventory Management BI Contents:
http://help.sap.com/saphelp_nw70/helpdata/en/fb/64073c52619459e10000000a114084/frameset.htm
2LIS_03_BX- Initial Stock/Material stock
2LIS_03_BF - Material movements
2LIS_03_UM - Revaluations/Find the price of the stock
The first DataSource (2LIS_03_BX) is used to extract an opening stock balance on a
detailed level (material, plant, storage location and so on). At this moment, the opening
stock is the operative stock in the source system. "At this moment" is the point in time at
which the statistical setup ran for DataSource 2LIS_03_BX. (This is because no
documents are to be posted during this run and so the stock does not change during this
run, as we will see below). It is not possible to choose a key date freely.
The second DataSource (2LIS_03_BF) is used to extract the material movements into
the BW system. This DataSource provides the data as material documents (MCMSEG
structure).
The third of the above DataSources (2LIS_03_UM) contains data from valuated
revaluations in Financial Accounting (document BSEG). This data is required to update
valuated stock changes for the calculated stock balance in the BW. This information is
not required in many situations as it is often only the quantities that are of importance.
This DataSource only describes financial accounting processes, not logistical ones. In
other words, only the stock value is changed here, no changes are made to the
quantities. Everything that is subsequently mentioned here about the upload sequence
and compression regarding DataSource 2LIS_03_BF also applies to this DataSource.
This means a detailed description is not required for the revaluation DataSource.
http://help.sap.com/saphelp_bw32/helpdata/en/05/c69480c357354a8846cc61f7b6e085/content.htm
http://help.sap.com/saphelp_bw33/helpdata/en/ed/16c29a27db6e4d81a015be8673eb80/content.htm
These are the standard data sources used for Inventory extraction.
Hope this helps.
Thanks,
JituK -
Extracting data FROM SAP BW/BI TO SAP R/3 Tables
Dear Experts,
I would like to know How to get the data from SAP BI/BW which we extracted earlier to SAP R/3 Tables.
in specific I want to get the data from BW/BI to R/3 Tables again.
for Ex: I have loaded data to ZFC_C25 Cube from SAP R/3 System. But now I want to load the data from ZFC_C25 Cube to my selected R/3 Tables.
Please give a clue if it is possible or not if YES How.
Thanks & Regards,
Sai.Hi
Check this Retraction document
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1910ab90-0201-0010-eea3-c4ac84080806
You can find more details regarding R/3 retractors :
https://websmp101.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700003587872003E
regards
Chandra SekharT
Maybe you are looking for
-
I have an asynchronous scenario of HTTP-> XI -> RFC. In my RFC function application errors may occur. I defined fault message type in my asychron inbound interface corresponding to exceptions of my RFC function.I tried to raise exception in my RFC f
-
What are correct steps of integrating and using jasper report with ADF 11g?
Hi, I am using JDev 11.1.1.2.0 with ADF 11g. I want to use jasperreports 3.7.0 along with ADF 11g to build reports in PDF on a button event. This is the first time I will be attempting it so before starting up I went through forum to get exact and cl
-
Available disk space not correct
I'm using a MacBook Pro (March 2011) running 10.6.8. I just deleted (technically backed up to an external raid and then deleted from the system disk) about 8gb worth of files. However, in Finder and in Disk Utility, it shows 1.96GB available. That n
-
Auto-download season pass TV show episode to Apple TV
Is there a way where I can set Apple TV to auto-download the latest episode of a TV show that I bought a season pass for? The reason I need this is because, when I try to stream it, depending on the network speed, sometimes it takes a long time. So I
-
Bridge CC (mais pas 2014) ?
Tout ou presque est passé en "CC (2014)", mais pas Bridge. Pourquoi ?