BW Extractor for FS10N Repot

Hello all,
I have seen few threads on BW extractors for FS10N report.
I would like to know which is the best BW extractor to use for FS10N report.
Is it 0FI_GL_4 or 0FI_GL_10 or 0FI_GL_1? Could anyone please suggest.
Thanks,
Praveen Tati

Thank you Murali.
The table FAGL_ACTIVEC has no entries in ECC. I assume it is not active.
I will use 0FI_GL_4 extractor and enhance as per the requirement.
Could you please tell me what setting I need to do to get latest delta's when I run data load from BW?
I understand that I need to do some settings in tables BWOM_SETTINGS, BWOM2_TIMEST.
Thank you very much.
Praveen
Edited by: Praveen Tati on Jun 17, 2011 11:12 PM

Similar Messages

  • Extractor for PM process orders

    Hi Experts,
    We are looking for a PM extractor for process orders, this is to get component information (material details), we found 2LIS_04_P_MATNR but it's limited to production orders only, also tried filling setup tables for this extractors but not fetching process orders at all.
    http://help.sap.com/saphelp_nw70/helpdata/en/88/7fc73c0c52085be10000000a114084/frameset.htm

    Is there any clues?

  • Is there any standard extractor for AFD provided by SAP?

    Hi.
    We are planning to implement SEM-BCS ? From this forum and  SAP documentation( help.sap.com and service.sap.com), I just found that integration with ECC is total records(RFD) and some master data. Unfortunately, I could't  find any further integration point. AFD such as inventory balance, Gross profit etc seems to be extracted from ECC such as FI, MM or CO module. But there is no mention in SAP documentation.
    I think I missed good integration point SAP provided.
    Otherwise, We have to develop the some program to extract AFD. Is my understanding correct?
    Is there anybody who has experience to extract AFD from ECC with standard extractor or CBO program?

    The main problem with automatical load of AFD is the strict dependence on the ECC/R/3 configurations that might differ very significantly.
    So, there is no standard extractors for AFD.
    IPI - I used to figure out the ways of calculating the figures needed for IPI with non-standard functionality. And understood that even with a standard functionality the task of extracting the proper values are not esy at all.
    IPA - there are so much data that needed to be entered for IPA, plus FI-AA configuration depends on implementation...
    CoI - the most of data for it is accessible in ECC, even in RFD.
    So, forget about the standard and easy way of extracting the data needed. Try to examine the configuration of modules you are interested in, and find the ways to extract the data.

  • Can I have TWO Extractors for ONE InfoObject ???

    Hi all,
        We have two extractors (Business Content & Generic Extractor for 0WBS_ELEMT_ATTR). Can we have these TWO extractors for 0WBS_ELEMT InfoObject. If yes, can I have the procedure, PLEASE ?
    Thanks.

    Hi Venkat,
    You can try to use Flexible update. For this you will need to make your InfoObject an InfoProvider. See here for an example:
    http://help.sap.com/saphelp_nw04/helpdata/en/87/3fdf9587f211d5b2ff0050da4c74dc/content.htm
    Hope this helps...

  • Extractor for AR aging report ?

    Can anybody tell me if there is a standard extractor for this query ?
    I would also appreciate if you can tell me what we can get out of this report.
    Thanks,
    Rishi.

    Hi Rishi
    Use following for AR aging report (All business content objects)
    Data source: 0FI_AR_4
    Info cube: 0FIAR_C03
    Query :0FIAR_C03_Q0005
    Hope this helps
    Regards
    Pradip

  • Extractor for payroll reads data from cluster PCL2?

    Hello all,
    This is the line from help.sap in payroll extractor.
    "The extractor for payroll results reads data from payroll cluster PCL2, not from standard tables."
    Can someone explain to me what do we have to understand from that, and where in R/3 do we have to go and check for data.
    Thanks in advance.

    Anytime some of last information does not upload in delta to BW from payroll because payroll has a process to close it had to be executed (or something like that (sorry, i haven't enough funcional HR knoledge), it happened to me anytime).
    But, surely the user that you are using for extraction has no enought rights or authorizations.
    Look at these notes
    397208 **** very important!!!
    672514
    964569
    329961
    585682

  • Extractor for table S115

    Hi,
    Im looking for a standar extractor that can obtain the information that i have in the table s115 of R/3; or its necessary to create an extractor generic?
    Thanks for the information
    Mónica

    Hi
    just create a generic extractor for this table.
    http://help.sap.com/saphelp_nw04/helpdata/en/37/4f3ca8b672a34082ab3085d3c22145/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/3f/548c9ec754ee4d90188a4f108e0121/content.htm
    Reg's
    Edan

  • Extractor for table COBRB

    Hello Experts,
    I am looking for a BC-extractor for table COBRB containingt hese fields:
    OBJNR, BUREG, LFDNR, PERBZ, URZUO, GABJA, GABPE, GBISJ, GBISP, PROZS, AVORG, KONTY, KOKRS, BUKRS, HKONT, NLN1, ANLN2, MATNR, REC_OBJNR1.
    Any idea?
    We need the relation between COORDER and the valid HKONT for a certain moment.
    As it is possible to have more than 1 HKONT (with different percentages and in time) I guess it is a different extractor than 0COORDER_ATTR and it can not just added to this ectractor.
    Thanks in advance,
    Udo

    Hi,
    Enter your table name in SE11 in ECC.
    Click Where-Used-List
    Select Structures, Programs etc., then it will show the entire info.
    Regards,
    Suman

  • Extractor for AUFK and AFKO tables

    Hello Experts,
    I am looking for a standard extractor for the tables AUFK (Order Master data) and AFKO (Order Header). I wanted to know if there a exists a standard extractor for the same or I have to create a generic one.
    Thanks,
    Rishi

    For internal orders (ie aufk) have a look at 0COORDER and the transaction data  0CO_OM_OP*
    and the rest of the content for IOs
    http://help.sap.com/saphelp_nw70/helpdata/en/f2/db0c3c99d56448e10000000a114084/frameset.htm

  • Extractor for FLEET table

    I need to extract some fields from the table FLEET, does any of you know if there's already a standard extractor for that?
    Otherwise I may need to enhance an existing one or create my own. If so, can you suggest any ideas about how to link the data?
    If I have to enhance, I was thinking about using 2LIS_08TRFKZ and add the missing fields there. Is this the right approach?

    HI,
    Enter this table name in SE11 ->Display->Where-Used-List->Select Stuctures, Includes, Programs etc...
    Get into ROOSOURCE table, Select A in OBJVERS, Extraction details etc..You will come to know about any Standard Extractor.
    I have no idea about your second question.
    Regards,
    Suman

  • Extractor for Purchasing Conditions for tables EKKO, EKPO and KONV

    Hi Experts,
    I want to know if there is an Extractor for Purchasing Conditions with fields in tables of Origin: EKKO, EKPO and KONV.
    Or, at least an extractor with the table KONV.
    Or, how I can look for it.
    Any feedback, will be really apreciated.
    Thanks in advance

    Hi David,
    Adding to what said above.
    Observe the Fileds in the Datasources and the details.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/5c/8ea0e626e442efb109232830faded9/frameset.htm
    Regards,
    Ram.

  • Extractor for Planned order

    Hi Experts,
    I am looking for the stabdard extractor for the Planned order, Basically I need the fields from the table PLAF.
    Please let me know any standard extractor available or any extractor need to enhance.
    Thanks
    sai

    Hi Sai,
    Take a look at 2LIS_04_P_MATNR and see if it is usefull:
    http://help.sap.com/saphelp_nw70/helpdata/en/88/7fc73c0c52085be10000000a114084/frameset.htm
    Else it seems that you should create a generic extractor directly on the table according to this thread:
    Re: Extractors for Planned orders and Proces Orders
    Hope this helps.
    BR
    Stefan

  • Extractor for goods issue

    Can anyone send me the name of the extractor for goods issue? Does it comes under SD? or MM fullfillment? 
    Thanjs
    Raj

    Hi RajMani,
    What exactly is your requirement?
    Check with your business or functional team for the source tables from where they want the report to be built.
    based on the source tables we can suggest you the exact data source you need for your requirement.
    Regards
    KP

  • Extractor for Table BKPF

    Hi ,
      I wanted to know the extractor for table BKPF . Where can i know or which is the extratcor
    Regards
    Ankit Vaish

    Hi,
    I hope, The datasource 0FI_GL_4 would be useful to you.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/8b/02f93abb013b0de10000000a114084/frameset.htm
    With rgds,
    Anil Kumar Sharma .P

  • Extractor for tbl CABN

    Hi ,
    Could someone tell me the std extractor for table CABN or how to find the extractor for the table.
    Thanks
    Jay.

    Hi dear,
    look at 0CRM_MKTATTR_ATTR
    http://help.sap.com/saphelp_nw2004s/helpdata/en/8d/4cb2188716e8428c84bef5140d19d1/content.htm
    Hope it helps!
    Bye,
    Roberto

Maybe you are looking for