BW Powered On HANA - System Copy Process

Dear HANA Gurus,
Now we are on HANA 1.0 SPS03 Rev.21, and we also have a BW 7.3 SP05, running on Windows 2008 64 bit server, on Oracle 11.2.
We want to migrate the BW to HANA DB. Refering to note 1600929 (which is version in revision), the Export method with system copy (using HANA special options) seems fine.
However, not sure how the Import will be done in HANA? We will be creating a new BW on Windows again, and if it is system  import it'll again create an Oracle based instance!
When and where it migrates to HANA DB?
Regards
Manish Madhav

Hello,
HANA conversion is heterogeneous system copy process (DB migration). You will export system on Oracle and then you will import into HANA. Of course you need to have proper CDs.
Here comes important question - did you signed up for SAP rampup? BW on HANA is not yet in Global Availability and only some customers are allowed to participate.
You can find required CDs at this location:
http://service.sap.com/swdc
Software Downloads
   Installations and Upgrades
      Browse our Download Catalog
         SAP NetWeaver and complementary products
            SAP NetWeaver BW 7.3 powered by SAP HANA
               BW ON HANA INSTALLATION 1.0
                  Installation
                     Downloads
If you cannot see these CDs - then you are not part of rampup and you need to wait until Global Availability.
If you can see these CDs - then you need to download them and use them to perform import.
I did not yet have opportunity to perform conversion myself (we still need to prepare our system to meed the requirements) but from SAP guides it is apparent that SAP HANA database is installed on one server (appliance) while ABAP is sitting on second server. (In other words - you should not have ABAP on same server as HANA.)
Also note that only ABAP stack can run on HANA.
And installation guide (here is for Windows):
http://service.sap.com/~sapidb/011000358700001240932011E.pdf
In a standard system, all main instances except the SAP HANA database instance run on a single host.
See system copy guide for details:
http://service.sap.com/~sapidb/011000358700001299452010E.pdf
SAP HANA database is available for SAP NetWeaver 7.3 ABAP only.
Tomas

Similar Messages

  • ABAP +JAVA system copy process

    Hello All,
    We are in process of building a server from a existing ECC 6.0 ABAP + JAVA system.
    We are using system copy process where we are restoring ABAP databse from source system.
    My question is about the JAVA part.
    How can we copy java part? Can we export only JAVA part from ECC 6.0 ABAP +JAVA system and import this to target server.
    Please suugest the process.
    Regards,
    Manish

    Hi Manoj,
    When you are doing restore of your P(DUAL stack)system then it will automatically restores your ABAP and JAVA scehema table spaces(Normal usage).And If you are using sapinst then take a CI export(for file system/java settings etc) of your source system and then you have to import that in your target system later in the process.So this procedure will automatially serve for both ABAP and JAVA schemas. Importantly this procedue was highly recommended by SAP,so if you run into any issues then you can go ahead and raise a OSS msg.
    Other guy already pasted the link for homogenious copy guides
    But you can do your java export from command level also(with out using SAPINST) and later you can import it into your target system.This means you are exporting your JAVA schema table space and importing.Keep it in mind that you have to export your Target java scehema not source system .If you do so then its of no use because you have to perform all post steps for java stack also. You can export and import table j2ee table space from your OS level at DB host using "exp javascehma/pwd ........."(not a full fledged command) and then you do the same by perforing "imp........." after restore and recovery from your P(source) system.But this is not at all recommended by SAP but this will work!.
    Let every one to know if you need anything more than this.

  • System copy process of XI server

    Hi
    In our XI landscape, we have XI development server and XI production server. We would like to create the
    XI Quality instance for testing. Also we want to refresh XI devepolment server from XI production server.
    Here XI 3.00 is installed on Unix platform with Oracle 10g database (SAP WebAS 6.40).
    Pls let me know the following:
    1. Can i create the XI quality server with System copy option from XI production server? or do i have
         to create XI quality server with the new installation? What would be the best option?
    2. I 'm not able to get the system copy process of SAP Web AS 6.40 for XI. Pls forward me system copy
        document or send me SAP link for the same. I have the System Copy document for system based   on SAP NW 2004s SR1 ABAP+ JAVA. Can i use this document?
    Thanks
    Amar

    hi check the below link
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cd76e07d-0c01-0010-298d-f699863f2ce4
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e1532f46-0a01-0010-bc88-af3272254881
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/200ebc93-dabe-2910-c1a6-c4ec30b20e04
    note:award points if found helpfull
    regards
    chandrakanth.k

  • Post System Copy Process

    Hello,
    We are getting ready to install new servers and we will be performing a homogenous copy process to the new servers which will have new names and ID on the network. We would like to run the new servers side by side with the current system so we can test. My questions are:
    1) With the systems running on the network together and we are ready to cut over to the new servers, would I just need to backup and restore the DB to the new DB server? Or do I have to go through the whole system copy process again?
    2) The first process we are using the R3Load because we have SQL 2000/Windows 2000. I understand the System Copy process with the Export file and then the migration (import) file, but do all of the post processes that are involved according to the System Copy guide have to be implemented again if I am able to simply restore the DB after doing the inital copy as described above?
    3) Any thoughts to how I can accomplish running the servers together for awhile for testing then cutting over to the new ones? Any quick notes from the field that would help make this easier?
    Thank you all so much,
    Jason

    >ERROR => DpHdlDeadWp: W14 (pid 3018) died http://dpxxdisp.c 14531
    the Work process are getting terminated.
    can you please paste full log from dev_w0 and dev_disp and std*
    >we upgraded the new kernel
    why don't you use the same kernel as same as source system?
    cheers,
    -Sunil

  • How to get Maintenance_HDB certificate for BW Powered With HANA system.

    Hi,
    We need to install Maintenance_HDB license in order to install BI -CONT addon component on our newly installed BW Powered With HANA system. But we could not get Maintenance_HDB license, as we are able to get only Maintenance_ADA License for our system.
    The main clarification required here is while adding a new entry in SMP (Service Market Place) of BW Powered By HANA system, what is the product that needs to selected in order to get HANA as database. We did selected Netweaver 7.3 for which we were actually made to select MAXDB as database but not HANA.
    Thanks & Regards,
    Pavan Indrakumar

    Well even though it says your customer number is not authorized for HANA DATABASE license for BW, we can add HANA as database product under Netweaver 7.3 and proceed requesting for Maintenace License.
    Not sure about the exact criteria behind the license provisioning.

  • Reducing time required for ABAP-only copyback (system copy) process

    Our company is investigating how to reduce the amount of time it takes to perform a copyback (system copy) from a production ABAP system to a QA system.  We use a similar process for all ABAP-only systems in our landscape, ranging from 3.1h systems to ECC6.0 ABAP-only systems on both DB2 and Oracle database platforms, and the process takes approximately two weeks of effort from end-to-end (this includes time required to resolve any issues encountered). 
    Here is an overview of the process we use:
    u2022     Create and release backup transports of key system tables and IDu2019s (via client copy) in the QA system to be overwritten (including RFC-related tables, partner profile and IDOC setup-related tables,  scheduled background jobs, archiving configuration, etc.).
    u2022     Reconfigure the landscape transport route to remove QA system from transport landscape.
    u2022                    Create a virtual import queue attached to the development system to capture all transports released from development during the QA downtime.
    u2022     Take a backup of the target production database.
    u2022     Overwrite the QA destination database with the production copy.
    u2022     Localize the database (performed by DBAu2019s).
    u2022     Overview of Basis tasks (for smaller systems, this process can be completed in one or two days, but for larger systems, this process takes closer to 5 days because of the BDLS runtime and the time it takes to import larger transport requests and the user ID client copy transports):
    o     Import the SAP license.
    o     Execute SICK to check the system.
    o     Execute BDLS to localize the system.
    o     Clear out performance statistics and scheduled background jobs.
    o     Import the backup transports.
    o     Import the QA client copy of user IDu2019s.
    o     Import/reschedule background jobs.
    o     Perform any system-specific localization (example: for a CRM system with TREX, delete the old indexes).
    u2022     Restore the previous transport route to include the QA system back into the landscape.
    u2022     Import all transports released from the development system during the QA system downtime.
    Our companyu2019s procedure is similar to the procedure demonstrated in this 2010 TechEd session:
    http://www.sapteched.com/10/usa/edu_sessions/session.htm?id=825
    Does anyone have experience with a more efficient process that minimizes the downtime of the QA system?
    Also, has anyone had a positive experience with the system copy automation tools offered by various companies (e.g., UC4, Tidal)?
    Thank you,
    Matt

    Hi,
    > One system that immediately comes to mind has a database size of 2TB.  While we have reduced the copyback time for this system by running multiple BDLS sessions in parallel, that process still takes a long time to complete.  Also, for the same system, importing the client copy transports of user ID's takes about 8 hours (one full workday) to complete.
    >
    For BDLS run, I agree with Olivier.
    > The 2 weeks time also factors in time to resolve any issues that are encountered, such as issues with the database restore/localization process or issues resulting from human error.  An example of human error could be forgetting to request temporary ID's to be created in the production system for use in the QA system after it has been initially restored (our standard production Basis role does not contain all authorizations required for the QA localization effort).
    >
    For the issues that you encounter because of system copy, you can minimize this time period as you would be doing it on periodic basis (making some task list) and you can make a note of issues that you faced in previous run. So, normally i don't count it as system copy time
    Thanks
    Sunny

  • System copy process

    Dear Experts,
    I am doing a homogenious system copy on ECC6 on windows plateform for STANDBY DATABASE .
    I am some queries
    1. I have taken the offline backup in sapbackup folder on source system  ( backup taken on hard disk )
    2. I have installed OS on target system .
    3. Now I am installing Database oracle 10g on target system .
    My query is
    I will  configure this system as a standy database for disaster recovery
    1. in the starting of oracle installation , it is asking to give DATABASE SID
    Is  the SAP SID , database sid , schema should be same if we use the system as standby database ?
    2. I have copied the sapbackup folder from source to target system .
    It will ask to restore the backup in the mid of installation .
    what will be the step by step process to restore offline backup from DISK.
    pl. suggest.

    you mean to say
    1. You have the install oracle and sap with with SID on target system with SAP's default database.
    Fresh installation of sap on standby database server *not* system refresh . Is it ?
    I was trying to make system refresh to create standby database server ( DR server ) . It is not required . am i right ?
    2. Restore the backup using brtools or by manually copy the file to sapdata location.
    After fresh installation of SAP , I have to restore the backup of primary server to standby server . Is it ?
    3. Create the standby control file.
    How ?
    4. Apply archive the keep database in mount stage.
    5. Apply archive to standby on regular basis.
    You mean to say , i have to configure data guard for point 3 , 4 and 5 .
    Pl. correct me

  • Migration export dvd missing in system copy process

    Hi
    1. We are doing system copy of XI 3.00 server that is based on SAP
       Web AS 6.40.
    2. I'm following the "Homogeneous and Hetrogeneous system copy for SAP
        System based on SAp Web AS ABAp 6.40 patch collection" document.
       Document version is 1.1 - July 11,2007.
    3. I'm using R3load tool for system copy (page 40 to 49). I exported
       the database (XDV) as per guide and now trying to re-import in XQA.
    4. Central instance in XQa has been installed successfully and not i'm
       stuck while installing the database instance. Process is looking for
       "Migration export" dvd that i don't have.
    Anyone get the same error? If someone suggest me the dvd number, i'll downlaod it from sapnet.
    Regards
    Amar

    Hi Elena
    Thanks for all your help. Refresh process of XQA from XDV is almost completed. XQA is up and java is working. Visual admin/ configtool are working good.
    I'm getting one problem. When i run tcode 'sxmb_ifr', it open the XDV link (http://dbcixdv:57000/rep/start/index.jsp) instead of XQA (http://rx2n1v1:57400/rep/start/index.jsp).
    Also Integration repository, integration builder, SLD are all pointing to XDV server (dbcixdv).
    I changed all setting (ID,IR, SLD, RWB) in 'http://rx2n1v1:57400:exchangeProfile' and it fixed  our problem but it also chnaged the XDV setting. Now XDV link is pointing to XQA server.
    Here XDV and XQA are in two different hardware server.
    Let me update pls how to fix this problem.
    Regards
    Amar

  • Special Considerations about BPC on HANA System Copy

    Hello experts,
    We will do a system copy for BPC on HANA from DEV to QAS (system installation with system copy method), are there any special considerations about the copy.
    Addtionally, can I say that the system copy for BPC and for BW are the same (both follow the system copy guide based on SAP NetWeaver)? Are the follow-up activites the same for both?
    Thanks & Best Regards,
    Tong Ning

    Hi Tong,
    If nothing has been changed in DEV after installation then backup & copy should be fine. I was thinking that you want to move custom development that way; recommended way for it is Transport system.
    Not sure if this will be faster than just installing everything in QAS.
    I'd think that the only follow-up activities would be change of references: to itself and to other systems. If active BW is in same box then it's more to change; if BW only serves as a platform for BPC then it's only SM59 and SPRO.
    Regards,
    Gersh

  • DB2 Row compression activated - Any changes during System Copy process?

    Hell All,
    I have activated DB2 Row Compression.
    Now i want to do a System Copy.
    Any changes due to this feature in the regular System Copy procedure? Like using R3load fastload COMPRESS options?
    Thanks,
    Bidwan

    Hello Bidwan,
    Please see the following blog regarding row compression:
    /people/johannes.heinrich/blog/2006/09/05/new-features-in-db2-udb-v9--part-4
    R3load has the new option '-loadprocedure fast COMPRESS'. Started with this option it loads part of the data, does a REORG to create the compression dictionary and then loads the rest of the data. This way the table does not grow up to it's full size before it is compressed. For more details see OSS note 886231.
    Regards,
    Paul

  • Homogeneous System Copy process: PRD to QAS on MSSQL

    We have a need to refresh our QAS system with a copy of PRD - the method I have been researching is a homogeneous database copy. I am having difficulty finding step-by-step documentation to carry this out for release R/3 4.6C.
    The only client refreshes I have performed are through SCC9 or SCCL and the R/3 installation was done by a consultants - hence the need for good step-by-step documentation!
    I should also note that our QAS system shares the same physical server as the DEV system.
    Any assistance is greatly appreciated.

    > I am assuming that I would be restoring the PRD database over the QAS database - this is where I am looking for additional documentation.
    Use
    http://service.sap.com/systemcopy
    all necessary steps (+ the mentioned notes) are described there.
    Markus

  • System Copy of XI 6.40 ABAP+JAVA

    Hi
    In our XI landscape, we have XI development server and XI production server. We would like to create the
    XI Quality instance for testing. Also we want to refresh XI devepolment server from XI production server.
    Here XI 3.00 is installed on Unix platform with Oracle 10g database (SAP WebAS 6.40).
    Pls let me know the following:
    1. Can i create the XI quality server with System copy option from XI production server? or do i have
         to create XI quality server with the new installation? What would be the best option?
    2. I 'm not able to get the system copy process of SAP Web AS 6.40 for XI. Pls forward me system copy
        document or send me SAP link for the same. I have the System Copy document for system based   on SAP NW 2004s SR1 ABAP+ JAVA. Can i use this document?
    Thanks
    Amar

    Hello,
    the System Copy document for system based on SAP NW 2004s SR1 ABAP+ JAVA is he wrong version for your system since it is based on 640 aka NW 2004. The "s" is very essetial.
    A System Copy is possible in XI 3.0 (=640) as long as your NW SP is at least SP 14.
    For more details please check the SAP Note 971645.
    for your conveniance I copied from this note the most importend additional link :
    You find the current version of the Java system copy guide on        
    SAP Service Marketplace at:                                          
    http://service.sap.com/instguidesNW04   > Installation   > SAP Web AS
      > SAP Web AS 6.40 SR1 and Related Documentation                    
      > Homogeneous and Heterogeneous System Copy                        
      > Homogeneous and Heterogeneous System Copy for SAP Systems based on
        SAP Web AS Java 6.40 Patch Collection                            
    Please read both, SAP Note and SAP Documentation for the intended copy.
    Best Regards
    Thomas

  • System copy XI

    Hello,
    I'm going to clone my xi. As I'm reading the homogeneous and heterogenous system copy for java and abap. I'm to the following conclusion. I need to do a oracle server specific copy. And do a sid rename on db level and in abap side with se06.
    but what about the java part? and what about the xi msg's that are in the systems and the adapters? Should i disable some adapters? and so on.
    In the java system copy there are some configur ation steps for xi. telling about sld integration server, exchange profile,cache,... but they are not telling about the msg's that still are in the system.
    What are the steps that I'm missing?
    Chris

    Hi Chris,
    you should use the Installation Master DVD to perform the System copy, There are 2 options to do the system copy;
    1) Export preparation
    Description Optional step for preparing the export of a SAP NetWeaver 2004s Support Release 1 system. The export preparations are required, if: you want to build up the target system up to the point where the database load starts, before the export of the source system has finished export and import processes should run in parallel during the system copy process Export Preparations The following steps will be performed:
    Creating the export directory structure with label files and source system information
    Creating database structure files (.STR) Updating database statistics (depending on the database platform and the selected dialog option)  Size calculation for the target database (.EXT, DBSIZE.XML)
    2) Database and Central Instance Export
    Description First mandatory step of a system copy procedure. The following steps will be performed: Creating the export directory structure with label files and source system information (if required) Creating database structure files (.STR) for ABAP database objects Updating database statistics (depending on the database platform and the selected dialog option) Size calculation for the target database (.EXT, DBSIZE.XML)
    Exporting the ABAP and / or Java database content Archiving the SDM
    Archiving application specific file system content
    REgards
    Anwer Waseem

  • SAP BW on HANA Migration for Process , Bex Queries and system Copy

    Hi All ,
    Can you please let me know the steps for migrating Process chains , BW queries and System copy for BW on HANA .
    If you have examples from real time scenarios it would be good .
    Thanks in advance

    Hi,
    for Systemcopies see also - SAP First Guidance - BW Housekeeping and BW-PCA
    for the overall process - SAP First Guidance - Migration BW on HANA using the DMO option in SUM
    Best Regards Roland

  • Error during a system copy with HANA DB

    Hello,
    I´m doing a system copy in a SAP ERP 6.0 EHP7 with SAP HANA DB.
    During a homogeneous system copy procedure with SWPM, it show me the following error during the phase Database refresh postload-activities.
    I checked some log files:
    -- sapinst.log:
    ERROR 2014-08-24 16:14:01.109
    MSC-04120  Creating a license signature failed:
    ===...could not load SSF library S:\usr\sap\\D00\exe\sapcrypto.dll .
    ERROR 2014-08-24 16:14:01.109
    MSC-04120  Creating a license signature failed: 543 wlikey_sign_for_installer: Couldn't load SAPSECULIB ("S:\usr\sap\\D00\exe\sapcrypto.dll") using function SsfSupInitEx (), rc = 10 (no library).
    ERROR 2014-08-24 16:14:01.109
    MSC-04120  Creating a license signature failed: 542 wlikey_sign_for_installer: At least one more attempt to load the SAPSECULIB will follow.
    INFO 2014-08-24 16:14:01.234
    Switched to user: ASCENDUMCE\ed1adm.
    INFO 2014-08-24 16:14:01.343
    Creating file C:\Program Files\sapinst_instdir\BS2013\BS2013SR1\ERP607SR1\HDB\COPY\SYSTEM\STD\AS-ABAP\REF\saplikey.log.
    INFO 2014-08-24 16:14:01.390
    Switched to user: ASCENDUMCE\ed1adm.
    INFO 2014-08-24 16:14:01.422
    Output of S:\usr\sap\ED1\SYS\exe\uc\NTAMD64\saplikey pf=\\SATDCSAP3\sapmnt\ED1\SYS\profile\ED1_DVEBMGS00_SATDCSAP3 -install_first_temp F1740289712 XXXXXX is written to the logfile saplikey.log.
    WARNING 2014-08-24 16:14:01.640
    Execution of the command "S:\usr\sap\ED1\SYS\exe\uc\NTAMD64\saplikey pf=\\SATDCSAP3\sapmnt\ED1\SYS\profile\ED1_DVEBMGS00_SATDCSAP3 -install_first_temp F1740289712 XXXXXX" finished with return code 2. Output:
    saplikey: failed to connect to the database.
    ERROR 2014-08-24 16:14:01.640
    CJS-30023  Process call 'S:\usr\sap\ED1\SYS\exe\uc\NTAMD64\saplikey pf=\\SATDCSAP3\sapmnt\ED1\SYS\profile\ED1_DVEBMGS00_SATDCSAP3 -install_first_temp F1740289712 XXXXXX' exits with error code 2. For details see log file(s) saplikey.log, dev_slic.
    ERROR 2014-08-24 16:14:01.703
    FCO-00011  The step createTempLicense with step key |NW_ABAP_DB_DBRefresh|ind|ind|ind|ind|0|0|NW_ABAP_DB|ind|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|createdbandload|0|NW_Postload|ind|ind|ind|ind|postload|0|NW_Postload_DBRefresh_ABAP|ind|ind|ind|ind|abap|0|NW_Temp_License_ABAP|ind|ind|ind|ind|lic|0|createTempLicense was executed with status ERROR ( Last error reported by the step: Creating a license signature failed:
    ===...could not load SSF library S:\usr\sap\\D00\exe\sapcrypto.dll .).
    INFO 2014-08-24 16:14:02.31
    Creating file C:\Program Files\sapinst_instdir\BS2013\BS2013SR1\ERP607SR1\HDB\COPY\SYSTEM\STD\AS-ABAP\REF\__instana_tmp.xml.
    INFO 2014-08-24 16:14:02.734
    Removed file C:\Program Files\sapinst_instdir\BS2013\BS2013SR1\ERP607SR1\HDB\COPY\SYSTEM\STD\AS-ABAP\REF\instslana.xml.
    INFO 2014-08-24 16:14:02.734
    Creating file C:\Program Files\sapinst_instdir\BS2013\BS2013SR1\ERP607SR1\HDB\COPY\SYSTEM\STD\AS-ABAP\REF\instslana.xml.
    -- saplikey.log:
    saplikey: failed to connect to the database.
    -- dev_likey:
    -> init()
      STATEMENT_CACHE_SIZE = 1000
    -> init()
    -> loadClientRuntime()
    Loading SQLDBC client runtime ...
    SQLDBC Module  : S:\usr\sap\ED1\hdbclient\libSQLDBCHDB.dll
    SQLDBC Runtime : libSQLDBCHDB 1.00.80.00 Build 0391861-1510
    SQLDBC client runtime is 1.00.80.00.0391861
    -> getNewConnection()
    <- getNewConnection(con_hdl=0)
    -> checkEnvironment(con_hdl=0)
    -> connect(con_info_p=0000000000000000)
    Try to connect via secure store (DEFAULT) on connection 0 ...
    *** ERROR => Connect to database failed, rc=1, rcSQL=10
    [dbhdbsql.cpp 332]
    SQLCODE    : 10
    SQLERRTEXT : invalid username or password:
    -> SetSdbDbslCA(errcode=10)
    -> freeConnection(con_hdl=0)
       close all opened locators of connection 0
    } DbSlHDBConnect(rc=99)
    ***LOG BY2=> sql error 10     performing CON [dblink       559]
    ***LOG BY0=> invalid username or password:  [dblink       559]
    *** ERROR => saplikey: failed to connect to the database. [saplikey.c   830]
    release memory of the SIBU buffers
    release memory of the STATEMENT CACHE
    Can you help me please!? This is very urgent!
    Thank you,
    samid raif

    Hello John Appleby,
    I ran the R3trans -d and this is the output:
    4 ETW000 r3trans version 6.24 (release 741 - 10.06.14 - 20:14:07).
    4 ETW000 unicode enabled version
    4 ETW000 ===============================================
    4 ETW000
    4 ETW000 date&time   : 24.08.2014 - 20:22:19
    4 ETW000 control file: <no ctrlfile>
    4 ETW000 R3trans was called as follows: r3trans -d
    4 ETW000  trace at level 2 opened for a given file pointer
    4 ETW000  [     dev trc,00000]  Sun Aug 24 20:22:19 2014                                                 124  0.000124
    4 ETW000  [     dev trc,00000]  db_con_init called                                                       103  0.000227
    4 ETW000  [     dev trc,00000]  set_use_ext_con_info(): usage of ssfs switched off (rsdb/ssfs_connect=0)
    4 ETW000                                                                                                  94  0.000321
    4 ETW000  [     dev trc,00000]  determine_block_commit: no con_hdl found as blocked for con_name = R/3
    4 ETW000                                                                                                  44  0.000365
    4 ETW000  [     dev trc,00000]  create_con (con_name=R/3)                                                 26  0.000391
    4 ETW000  [     dev trc,00000]  Loading DB library 'dbhdbslib.dll' ...                                    64  0.000455
    4 ETW000  [     dev trc,00000]  DlLoadLib success: LoadLibrary("dbhdbslib.dll"), hdl 0, count 1, addr 000007FEEFE00000
    4 ETW000                                                                                                5889  0.006344
    4 ETW000  [     dev trc,00000]      using "S:\usr\sap\ED1\SYS\exe\uc\NTAMD64\dbhdbslib.dll"               35  0.006379
    4 ETW000  [     dev trc,00000]  Library 'dbhdbslib.dll' loaded                                            36  0.006415
    4 ETW000  [     dev trc,00000]  function DbSlExpFuns loaded from library dbhdbslib.dll                    52  0.006467
    4 ETW000  [     dev trc,00000]  Version of 'dbhdbslib.dll' is "741.10", patchlevel (0.43)                111  0.006578
    4 ETW000  [     dev trc,00000]  function dsql_db_init loaded from library dbhdbslib.dll                   39  0.006617
    4 ETW000  [     dev trc,00000]  function dbdd_exp_funs loaded from library dbhdbslib.dll                  63  0.006680
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    81  0.006761
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=-1,command=39,arg_p=0000000000000000)            40  0.006801
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    29  0.006830
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=-1,command=10,arg_p=000000000221F280)            34  0.006864
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    29  0.006893
    4 ETW000  [     dev trc,00000]  New connection 0 created                                                  25  0.006918
    4 ETW000  [     dev trc,00000]  0: name = R/3, con_id = -000000001, state = DISCONNECTED, tx = NO , bc = NO , oc = 000, hc = NO , perm = YES, reco = NO , info = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO , prog = 
    4 ETW000                                                                                                  63  0.006981
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=-1,command=10,arg_p=0000000141FF5E40)            49  0.007030
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    30  0.007060
    4 ETW000  [     dev trc,00000]  db_con_connect (con_name=R/3)                                             31  0.007091
    4 ETW000  [     dev trc,00000]  determine_block_commit: no con_hdl found as blocked for con_name = R/3
    4 ETW000                                                                                                  42  0.007133
    4 ETW000  [     dev trc,00000]  find_con_by_name found the following connection:                          28  0.007161
    4 ETW000  [     dev trc,00000]  0: name = R/3, con_id = 000000000, state = DISCONNECTED, tx = NO , bc = NO , oc = 000, hc = NO , perm = YES, reco = NO , info = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO , prog = 
    4 ETW000                                                                                                 124  0.007285
    4 ETW000  [     dev trc,00000]  { DbSlHDBConnect(con_info_p=0000000000000000)                             61  0.007346
    4 ETW000  [     dev trc,00000]  DBHDBSLIB : version 741.10, patch 0.043 (Make PL 0.43)                    65  0.007411
    4 ETW000  [     dev trc,00000]  HDB shared library (dbhdbslib) patchlevels (last 10)                      37  0.007448
    4 ETW000  [     dev trc,00000]    (0.043) R3szchk with partitioned tables (note 2040561)                  32  0.007480
    4 ETW000  [     dev trc,00000]    (0.031) New DBCON syntax for HANA (note 1983389)                        50  0.007530
    4 ETW000  [     dev trc,00000]    (0.028) Bulk insert stop on duplicate, dbsl returncode corrected (note 1996982)
    4 ETW000                                                                                                  51  0.007581
    4 ETW000  [     dev trc,00000]    (0.027) Set DBAREQ class (note 1991383)                                 35  0.007616
    4 ETW000  [     dev trc,00000]    (0.022) Get database version via dbsl call (note 1976918)               36  0.007652
    4 ETW000  [     dev trc,00000]    (0.020) FDA: Core Dump in SELECT ... FOR ALL ENTRIES for tables with strings (note 1970276)
    4 ETW000                                                                                                  53  0.007705
    4 ETW000  [     dev trc,00000]    (0.020) SQL DDL with data aging (note 1897636)                          35  0.007740
    4 ETW000  [     dev trc,00000]    (0.017) Datatype NCLOB missing in tablesize calculation (note 1952609)
    4 ETW000                                                                                                  52  0.007792
    4 ETW000  [     dev trc,00000]    (0.014) Tablesize calculation for HANA optimized (note 1952609)         36  0.007828
    4 ETW000  [     dev trc,00000]    (0.014) Native SQL UPSERT with DataAging (note 1897636)                 32  0.007860
    4 ETW000  [     dev trc,00000]                                                                            22  0.007882
    4 ETW000  [     dev trc,00000]   -> init()                                                                33  0.007915
    4 ETW000  [     dev trc,00000]    STATEMENT_CACHE_SIZE = 1000                                            212  0.008127
    4 ETW000  [     dev trc,00000]   -> init()                                                               615  0.008742
    4 ETW000  [     dev trc,00000]   -> loadClientRuntime()                                                   46  0.008788
    4 ETW000  [     dev trc,00000]  Loading SQLDBC client runtime ...                                         31  0.008819
    4 ETW000  [     dev trc,00000]  SQLDBC Module  : S:\usr\sap\ED1\hdbclient\libSQLDBCHDB.dll              1327  0.010146
    4 ETW000  [     dev trc,00000]  SQLDBC Runtime : libSQLDBCHDB 1.00.80.00 Build 0391861-1510               84  0.010230
    4 ETW000  [     dev trc,00000]  SQLDBC client runtime is 1.00.80.00.0391861                               50  0.010280
    4 ETW000  [     dev trc,00000]   -> getNewConnection()                                                    37  0.010317
    4 ETW000  [     dev trc,00000]   <- getNewConnection(con_hdl=0)                                          100  0.010417
    4 ETW000  [     dev trc,00000]   -> checkEnvironment(con_hdl=0)                                           53  0.010470
    4 ETW000  [     dev trc,00000]   -> connect(con_info_p=0000000000000000)                                  42  0.010512
    4 ETW000  [     dev trc,00000]  Try to connect via secure store (DEFAULT) on connection 0 ...             86  0.010598
    4 ETW000  [dbhdbsql.cpp,00000]  *** ERROR => Connect to database failed, rc=1, rcSQL=10                11122  0.021720
    4 ETW000  [     dev trc,00000]  SQLCODE    : 10                                                           68  0.021788
    4 ETW000  [     dev trc,00000]  SQLERRTEXT : invalid username or password:                                40  0.021828
    4 ETW000  [     dev trc,00000]   -> SetSdbDbslCA(errcode=10)                                              41  0.021869
    4 ETW000  [     dev trc,00000]   -> freeConnection(con_hdl=0)                                             43  0.021912
    4 ETW000  [     dev trc,00000]     close all opened locators of connection 0                              60  0.021972
    4 ETW000  [     dev trc,00000]  } DbSlHDBConnect(rc=99)                                                   65  0.022037
    4 ETW000  [    dblink  ,00000]  ***LOG BY2=>sql error 10     performing CON                               68  0.022105
    4 ETW000  [    dblink  ,00000]  ***LOG BY0=>invalid username or password:                                 35  0.022140
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=41,arg_p=0000000140541C48)            107  0.022247
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    79  0.022326
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=14,arg_p=0000000002215998)             38  0.022364
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    28  0.022392
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=50,arg_p=0000000002215990)             33  0.022425
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    43  0.022468
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=13,arg_p=00000000022159B0)             35  0.022503
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    27  0.022530
    4 ETW000  [     dev trc,00000]  { DbSlHDBControl(con_hdl=0,command=52,arg_p=0000000002215A00)             33  0.022563
    4 ETW000  [     dev trc,00000]  } DbSlHDBControl(rc=0)                                                    28  0.022591
    2EETW169 no connect possible: "DBMS = HDB                              ---  SERVER = '' PORT = ''"
    4 ETW000  [     dev trc,00000]  release memory of the SIBU buffers                                      2900  0.025491
    4 ETW000  [     dev trc,00000]  release memory of the STATEMENT CACHE                                     91  0.025582

Maybe you are looking for

  • Using Photoshop Elements to scan but iphoto for slideshow

    I use an Epson V600 to scan old photos, which runs on a Photoshop Elements program. I am creating a slideshow for my grandmother's 90th birthday party, and I prefer to use iphoto for the slideshow. What is the best FORMAT for the photos as they are s

  • Sign on revenue items showing wrong.

    while reconciling COPA to FI  the sign on the  revenue items (pricing conditions) is hitting COPA is not correct.  It is not showing for all but only for some.

  • Screen flickers with multi coloured lines... then dies

    I really hope someone out there can help... My iphone is only a couple of months old (bought it first day of release in Australia) and now it is starting to break down. When i press the home key, the screen flickers and has these strange multi colour

  • ATV won't sync latest downloaded Video from Apple..

    Hi all. I've tried everything I can think of without luck. Ive had ATV now for several months. No issues apart from the normal ones that everyone seems to have. My Itunes library is off the imac, stored on a Apple time capsule. Everything syncs just

  • Touchstart, Touchmove & Touchend Help Please

    Hi There. I have been working on on a Drag Touch start, move and end project. What I am trying to do is move / drag an item on an ipad so that when it reaches a certain area on the stage it creates an event- for example. Hide or show an object. I hav