BW reports (BEx Reports) in Sneak preview ABAP version

Hi All,
Is it possible to display the BW data in BEx reports with help of Tr code RRMX in Sneak preview ABAP trail version.
When i try to run Trcode RRMX system says Please install Excel as viewer..
Please let me know , how we can display data.
Regards.
Hari

Hi,
May be your SAP GUI, BW components are not installed. Reinstall SAP GUI and select BW checkbox during installation. Also you need to have ur excel macro setting (tools->macro->security) as either low or medium.
check this note: 160995-BEx Analyzer: Excel Add-ins interfere at the start.
If you are in 7.0, you need to unstall your front end and reinstall the 7.0 front end.
You may troubleshoot using below link
Troubleshoot the SAP NetWeaver 2004s BI Frontend Installation
Hope it helps.
Regards,
Srikanth

Similar Messages

BW Reports( BEx reports) in Sneak preview ABAP trail version.

Hi All,
Is it possible to display the BW data in BEx reports with help of Tr code RRMX in Sneak preview ABAP trail version.
When i try to run Trcode RRMX system says Please install Excel as viewer..
Please let me know , how we can display data.
Regards.
Hari

Hi,
May be your SAP GUI, BW components are not installed. Reinstall SAP GUI and select BW checkbox during installation. Also you need to have ur excel macro setting (tools->macro->security) as either low or medium.
check this note: 160995-BEx Analyzer: Excel Add-ins interfere at the start.
If you are in 7.0, you need to unstall your front end and reinstall the 7.0 front end.
You may troubleshoot using below link
Troubleshoot the SAP NetWeaver 2004s BI Frontend Installation
Hope it helps.
Regards,
Srikanth

Netweaver Sneak Preview ABAP Version installation problem

hi,
I could install to the step Database Insatnce Creation with this error:
ERROR 2015-06-02 23:33:54
The dbmcli call for action PARAM_INIT_INST failed. Check the logfile XCMDOUT.LOG.
And in the file XCMDOUT.LOG this such message was found:
> Subprocess starts at 20150602233354
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n Cosinus -d NSP -u CONTROL,********
Execute Session Command : param_startsession
Execute Session Command : exit
> Subprocess stops at 20150602233354
Error! Connection failed to node Cosinus for database NSP: ERR_USRFAIL: User authorization failed
How can I fix this?
Thanks!
TD

NSP: ERR_USRFAIL
this is because , the previous installation's max db was not removed properly.
if you remember the previously used password for db use the same when specifying the password for superdba, control , etc.
or else, run the uninstaller from the new extract (2004s) and start a fresh installation after that.
Regards
Raja

Sneak Preview ABAP Edition just released

The Sneak Preview: ABAP Edition is now available. Kathy just announced it in the forum: Sneak Preview Update: ABAP Edition just released!!
The link to the Sneak Preview stays the same: https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/cfc19866-0401-0010-35b2-dc8158247fb6
Basically this is a "slim" or "mini" ABAP installation with a compressed database component, comparable to the "slim" Java version. It's supposed to run with a minimum of 1GB but 2GB RAM is recommended.
Feedback on this edition, like the others, should go in the SDN Code Sample/Download forum (Software Downloads).
Cheers,
Marilyn

It would be really awesome to see the community weigh in on their experiences with this installation.
I'm going to suggest that we find a way to reward participants for doing a good job of sharing and documenting their experiences with the installation.
One idea would be to give a "double point" allocation.
That means that good content contribution (articles, blogs, detailed forum posts in a separate marked thread) that articulates the substance of what a downloader does in the course of the new ABAP Sneak Preview installation: tips and tricks, installation guide details, observations and detailed opinions, will be doubly rewarded.
Hey, this is a very time consuming activity, as I am experiencing myself at present.
Thoughts?
Marilyn

ADS for SAP NW2004s Sneak Preview ABAP..

Hello folks,
Do we need ADS (Adobe Document Services) on SAP NW2004s Sneak Preview ABAP to run Interactive Adobe forms?
Regards,
Sarath.

I figured out we need ADS for SAP NW2004s Sneak Preview ABAP. Moreover we need a Java engine also.

Error installing SAP Netweaver Sneak Preview ABAP

Hi
I'm getting the following error when I try to install SAP Netweaver Sneak Preview ABAP.
ERROR 2006-04-04 13:51:02
MOS-01185 The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NPFMntor' does not exist on the 'localhost' host.
ERROR 2006-04-04 13:51:02
FCO-00011 The step collect with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_GetSidNoProfiles|ind|ind|ind|ind|2|0|collect was executed with status ERROR .
I'm on Windows XP SP2 Profession.
By the way... is this the right forum?
Thanks in Advance

Hi
This is something related to your anti virus software like norton.Please trun off Norton while Installing SAP and also make sure that the Id which you use to install SAP has administrator rights.
Thanks
prince jose

GUI Server Process Error when installing NetWeaver 2004s Sneak Preview ABAP

Hi,
I've downloaded the SAP NetWeaver 2004s Sneak Preview ABAP and tried to install it. As adviced in the Installing guide I installed the SDK first. When starting SAPinst.bat I get pretty soon this error - what can I do to solve this problem:
Thanks for Your help,
Markus
SAPinst is getting started.
Please be patient ...
starting gui server process:
sapinstport: 21200
guiport : 21212
command : "C:\Programme\Java\jdk1.5.0_02\bin\javaw.exe" -cp "C:/DOKUME1/MARKUS1/LOKALE1/Temp/sapinst_exe.3800.1156381700\jar\instgui.jar;C:/DOKUME1/MARKUS1/LOKALE1/Temp/sapinst_exe.3800.1156381700\jar\inqmyxml.jar" -Xmx256M -Dsun.java2d.noddraw=true SDTServer config=jar:sdtserver.xml guiport=21212 sapinsthost=localhost sapinstport=21200
The process that should run the GUI Server could not be started.
Please make sure that a JDK is installed on this host and that SAPINST_JRE_HOME points to the root
directory of your Java installation. As an alternative you may start the GUI Server on another host
(for details please consult the installation guide).
103 controller.errorStartingGuiWindows 1580
Exit status of child: 1

Hi,
I've stored the folders and files into root drive and installed jdk 1.4.2.08 - still the same error messages.
What strikes me:
'command : "C:\Programme\Java\jdk1.5.0_02...'
Why 'jdk1.5.0_02'? My installes version is 1.4.2_08!
I don't know if my environment variables are right. I'm quite a JAVA dummy: I suppose these variables are to be set within the SDK? Which variables should I check (and how)?
Message was edited by: Markus Jarasch

Sneak Preview ABAP - Password for Database Manager Operator Control

Hello All , My first installation 'SAP NetWeaver 2004s Sneak Preview ABAP' was aborted where I did supply the password for Database Manager Operator Account : Control . When I am trying to reinstall , the installation fails and it comes back with a message
' The check of the control user password failed . Check logfile XCMDOUT.LOG '.
I think I am supplying the correct password which I entered originally .
Thanks
Rajesh Kapoor

hi there,
the default password for control is control.
According to about threethousandfivehundredandtwelve postings in here your problem might arise due to the usage of special characters in the password, e.g. a +(plus).
What do the last few lines of your XCMDOUT.LOG read?
regards,
anton

Sneak Preview ABAP NW04s license expired

Hi,
I havenu00B4t been using the SNeak Preview ABAP 2004s system for a month. Now I want to use it again, but the license expired at Oct 17. I put the system in back date, i.e. Oct 16 to be able to connect with the system and I tried to install the new license, which I got from SAP Developer Network.
My problem is that I am not able to install the new license. The expiration date is 20070221 because I got the new license, but when I try to install it, the system hangs and after a while I get a Dump.
I start the system with nspadm user and I also tried with c:\usr\sap\NSP\SYS\exe\nuc\NTI386\saplicense -install, but it was impossible too.
Please, can anybody give me an answer for this? Any suggestion?
Thanks in advance
Investiga

I finally resolved my problem yesterday. That is the answer. I did exactly what you mention now: to try and try. I don't know what happened, but when I insisted it worked !
Anyway, Thanks a lot to all
Investiga

Sneak preview ABAP - Developer Key too long.

I installed Sneak preview ABAP edition and I requested the developer key, the key I have received is of 24 digits where as the size of the screen field is 20 digits. I don't know how I can get the correct key.
Thanks,

Hi Gregor,
I could'nt able to give 10 because, I resolved the issue my self by referring to the article you wrote and I set this question to solved before you sent me the link. The radio button for the "Solved Problem (10)" is disabled. Any way I will give you another 6 now. Enjoy.
Suman

NW2004s sneak preview ABAP - BI

Hi all,
I have installed NW2004s sneak preview ABAP succesfulLY in my laptop. Now i created a cube, data source and ransforamtions in client 001 and tried to load data from a flat file. I m getting an ABAP run time error when i execute a DTP or info package to load the data.
How can i solve this problem.
Has any one come across this situation.
Regards
Praveen

Check out the note 946481. This should resolve your issue.
Please update the output
Regards
Pankaj

Error while installing Netweaver 04s sneak preview trial version for java

Hi Experts,
I am trying to install SAP netweaver 04s sneak preview trial version for Java in my own desktop. While installing, it is showing the following error
ERROR
CJS-30129 Creating node $(DIR_TRANS) with type DIRECTORY failed. Original exception text was: syslib.filesystem.nodeCreationFailed:Unable to create node
abcd\sapmnt\ with type DIRECTORY: can't create parent node..
ERROR
CJS-30129 Creating node $(DIR_TRANS) with type DIRECTORY failed. Original exception text was: syslib.filesystem.nodeCreationFailed:Unable to create node
abcd\sapmnt\ with type DIRECTORY: can't create parent node..
ERROR
FCO-00011 The step createSystemDirectories with step key |NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|6|0|createSystemDirectories was executed with status ERROR .
I gave the database host name as the name of the computer. While installing the 3rd step, the above error is displaying. can anyone guide me how to proceed further.
regards,
vv

how are u trying to install it.....i mean...are the source and the installtion drive on the same PC?

Not able to access remotely to sap was abap sneak preview (trial version)

hi all
i have recently installed sap netweaver 2004s was abap sneak preview which is downloaded from sdn.sap.com. but the problem is i am able to access layout tab from server machine only, not from any other client machine. the layout tab shows that "page can't be displayed" mode of internet explorer. i am using explorer 6.0.
are there any security settings needed in either of the machines?
thanks in advance
shabbir khan

first of all thanks abhimanyu
i have one doubt. r u accessing from client machune , or that trial version is installed on ur system it self.
if ur accessinf from client machine .. u need to do some settings in ur client machine so that it should not hit ur local browser .. where as it has to hit ur servers browser. in my problem.. my client machines are hitting my their own systems browsers . . plz let me know what that setting is
thanks in advance .. its urgent

Sneak Preview ABAP 2004s: Problem with HTTP-Server

Hi..
I have just installed the sneak preview.
Everything works well.
But there is a problem with the webdynpro
for abap. When i try to start the example
i become a message: "Windows can not find
://:/sap/bc/webdynpro/sap/wdt_quiz ....... "
This error is from the HTTP options.
In transaction SMMS over extert functiuns->http->display
the parameter http_status_code is -1.
Can anyone help me what i can do?

when you go into transaction SMICM->go to ->services you should atleast see one entry for HTTP
it will be something like below.
No. Protocol Service Name/Port Host Name Keep Alive Acti External Bind
1 HTTP 1081 xxxx.domain.com 30
i dont think that for this reason , you have to go for a reinstall, i am sure some config is missing.
Regards
Raja

NW -Sneak Preview ABAP Error

Hi
I hav installed the ABAP Version in my machine. when i try to login to SAP and starting the NSP database i was not able to login to sap. i am encountering the following error
An invalid request was made to the database interface
when accessing table "DOKTL"
Last error logged in SAP kernel
Component............ "NI (network interface)"
Place................ "SAP-Server Ganesan_NSP_00 on host Ganesan (wp 0)"
Version.............. 38
Error code........... "-16"
Error text........... "verify own hostname 'Ganesan' failed"
Description.......... "NiIMyAddrVerify"
System call....... ""
Module............... "nixxi.cpp"
Line................. 7458
The error reported by the operating system is:
Error number..... " "
Error text....... " "
Pls suggest me
Ganesh

did you install loop back adapter and configured the IP address
and set the IP address 10.10.0.10 pointing to your host Ganesan in windows/system32/drivers/etc/hosts file?
Regards
Raja

BW reports (BEx Reports) in Sneak preview ABAP version

Similar Messages

Maybe you are looking for