BW statistic cube not populating

Hi All,
Our BI system has BI statistics installed...there are about 8 standard cubes which tracks the statistics across the BI.Out of these cubes,there is one cube called DTP statistics(0TCT_C22) whose purpose is to capture the statistics of all cubes in BW like load start time,end time,cube name etc.
This DTP statistics cube some how has the requests coming every day....but no data available in all the requests(says 0 records)...hence no data available in the cube for reporting.
The rest of the 7 standard cubes has the data except this cube.
I even checked the PSA for the corresponding data source 0TCT_DS22 ....even this has requests...with status saying no records.
The process chain is scheduled every day with delta info packages to this cube.
I checked the RFC connection in SM59..it looks fine.
I checked the statistics settings on this cube...but not sure about settings.
I checked BI statistics settings...under info provider I can see the cube 0TCT_C22 .
The field statistics on/of = 'D' and OLAP = blank for this cube.
On the top besides replace values tab, there is settings which say 'X on' ....'2 ALL'
Your help is surely appreciated..
Thanks,
Jay

Gupta,
I have checked the entry..but there is no entry in that table .
So I am going to look at the note you mentioned.
If the note is helpful,I will definitely assign you the points
Thanks,
JB

Similar Messages

Fields not populated in cube

hi experts,
i have one problem i have sales item,and header dso's which i have loaded the data using flat files.when am trying to load to cube some of the fields of header is not getting populated.when i am loading only header data that time it is showing the data in cube.when i am loading item data also that time some of the fields of header are not populating in cube.i have tried by taking two seperate cubes for header and item and tried to loading data to multiprovider. but same issue came.for ur reference i am providing screen shots of that. this is multi provider screen shot in this u can observe that division ,region and some fields are not populating data. in local sand box i have done this please help me to resolve this issue.
header cube screen shot before loading to multiprovider.
item cube screen shot before loading to multiprovider.
regards
jaswanthi

How are you "loading" to a MultiProvider? A MultiProvider is merely a "view" on 1 or more InfoProviders, nothing gets loaded in it.
The screen shot of your MultiProvider shows data of your items InfoCube only... have you filtered on the InfoProvider field? If not, try and filter on your header InfoCube and see whether it shows any data. If not, then there's something wrong with your mappings in the MultiProvider definition.
It's perfectly normal to have empty fields if you're combining 2 InfoProviders into 1 MultiProvider. If that's not what you want, you should consider an InfoSet (which "joins" data) or model it so that when you're sending item data to a new InfoCube, you "look up" the missing header data in your header data DSO and add it.

BI statistic cube 0TCT_CA1

Hi,
I am using query based on the BI statistic cube 0TCT_CA1 to get the workbook execution times and it is working fine.
But I have two queries.
1) some workbook stored in favourites. Is it possible to show them in separate category or have them displayed in a separate workbook?
2) I do find the calendar year/month characteristic in this cube, but it seems this one is not populated in the cube. Insteadly in 0TCT_C01, the calendar year/month is populated correctly.
Many Thanks
Jonathan

Hi,
In addtion, I found the NO. of execution of BI workbooks are different in cube 0TCT_CA1 and 0TCT_C01 in some cases?
can anyone help?

Amount field is not populating properly

Expert's,
Here is an issue where one of the amount field not populating properly.For some opportunities the amount field will be just displyed as'0' but for some opprtunities the amount field is displaying as'$0'.The data we are pulling is from CRM.
Thanks in advance.
vasu.

Hi,
looks like extenstion of your last thread
did you already have a look in data in cube?just to make sure,try to display cube's data using List cube transaction .Take this amount field,corresponding Currency Key,and you rmost impotant characteristics...and check whether all records are having entry in 'currency' column?

Restricted key figure not populating data

Hi Guru's,
I am facing problem with restricted keyfigure. I have restricted amount with cal year which is not populating data.
This key figure is having data in provider.
Could you let me know how to overcome this .
Thanks in advance.
Thanks,
Vijay.

Hi,
The quesry is on Multiprovider? or infoset? it matters first..... or directly on cube? check it and apply relevent infoprovider properties for logic check.
Check the global filters are there any infoprovider restrications etc...
And also while checking the datafor the KF in infoprovide " use ALL the restrictions that are in query and impact the data"
also try removing the restiction and look for data...
Hope this helps.'

Virtual Char/KF not populated in the query ????

Hi,
Can anybody suggest why Virtual char/KF are not populated in Query. I just want to populate the value from existing cube characterstics/KF value.
Code as follows:
Cube : ZDEBC01
Virtual Char: ZVIRTUAL1
Virtual KF : ZVIRTUALK
*& Include           ZXRSRU02
DATA: L_S_CHANM TYPE RRKE_S_CHANM.
CASE I_S_RKB1D-INFOCUBE.
WHEN 'ZDEBC01'.
    L_S_CHANM-CHANM = '0SOLD_TO'.
    L_S_CHANM-MODE = rrke_c_mode-READ.
    APPEND L_S_CHANM TO E_T_CHANM.
    L_S_CHANM-CHANM = 'ZVIRTUAL1'.
    L_S_CHANM-MODE = rrke_c_mode-NO_SELECTION.
    APPEND L_S_CHANM TO E_T_CHANM.
    APPEND '0INVCD_QTY' TO E_T_KYFNM.
    APPEND 'ZVIRTUALK' TO E_T_KYFNM.
ENDCASE.
*& Include           ZXRSRTOP
DATA: G_POS_ZDEBC01_ZVIRTUAL1 TYPE /BIC/OIZVIRTUAL1.
DATA: G_POS_ZDEBC01_ZVIRTUALK TYPE I.
DATA: G_POS_ZDEBC01_0SOLD_TO TYPE /BI0/OISOLD_TO.
DATA: G_POS_ZDEBC01_0INVCD_QTY TYPE I.
*& Include           ZXRSRZZZ
FORM USER_ZDEBC01 USING    I_S_RKB1D TYPE RSR_S_RKB1D
                           CHANGING C_S_DATA TYPE ANY.
FIELD-SYMBOLS <L_ZVIRTUAL1>.
FIELD-SYMBOLS <L_ZVIRTUALK>.
FIELD-SYMBOLS <L_0SOLD_TO>.
FIELD-SYMBOLS <L_0INVCD_QTY>.
ASSIGN COMPONENT G_POS_ZDEBC01_0SOLD_TO
      OF STRUCTURE C_S_DATA TO <L_0SOLD_TO>.
ASSIGN COMPONENT G_POS_ZDEBC01_0INVCD_QTY
      OF STRUCTURE C_S_DATA TO <L_0INVCD_QTY>.
ASSIGN COMPONENT G_POS_ZDEBC01_ZVIRTUAL1
      OF STRUCTURE C_S_DATA TO <L_ZVIRTUAL1>.
ASSIGN COMPONENT G_POS_ZDEBC01_ZVIRTUALK
      OF STRUCTURE C_S_DATA TO <L_ZVIRTUALK>.
<L_ZVIRTUAL1> = <L_0SOLD_TO>+0(3).
<L_ZVIRTUALK> = <L_0INVCD_QTY> + 1000 .
ENDFORM.                    "USER_ZDEBC01
Thanks,
Debasish
null

Hi,
in your code all variables:
DATA: G_POS_ZDEBC01_ZVIRTUAL1 TYPE /BIC/OIZVIRTUAL1.
DATA: G_POS_ZDEBC01_ZVIRTUALK TYPE I.
DATA: G_POS_ZDEBC01_0SOLD_TO TYPE /BI0/OISOLD_TO.
DATA: G_POS_ZDEBC01_0INVCD_QTY TYPE I.
must be of type i.
regards
Siggi

BI Statistical data not able to load delta data

Hi Experts,
I am working on BI7.0, we are trying to activate the BI Statistical cubes and load Delta data, so in the process , I did all the steps , activated and initialised the Data sources in BI
0TCT_DS03,0TCT_DS02 to the Cubes0TCT_C02 and 0TCT_C03, My aim is initialise today and load the delta loads from today onwards and I gave init selection on date, as start date today, and I switched on all BI stastical data but my delta records are not coming, I see in RSA7 in my BI system, I did not see my delta getting updated
Please advise how to get this delta records for these Data sources,
Thanks in advance

Hello Dheeraj ,
If delta is showing Zero records then there is no records changes or creation after the Init Run. So do some activities that will be captured in the Stat and then load the delta.
Thanks
Chandran

Problem with query based on the statistic cube

Hello,
I need to make a report based on the statistic cube in order to display:
User
Query
Last Date of execution of the Quey
I find the following result:
User 01 Query 01 Date1
User 01 Query 01 Date2
User 01 Query 01 Date3
How to display only the first line with the last date of execution of the query?
Thanks.

Hi,
This requirement is easily feasible in webi.In bex you need to create formula variable with replacement path on your date.
Then you can apply exception aggregation on this newly created as last value or first value and reference characteristic as the date.
Only constraint is that you need to put date in rows when you use formula variable otherwise it will not display the value.
So it doesnt serve your purpose.Even we had similar requirements in past where we were not allowed to do modeling level changes so to accomplish that we made webi report.
Hope this helps.
Regards,
AL

Pl/sql report not populating output

SQL> CREATE OR REPLACE PROCEDURE GET_RECORDS(v_action IN VARCHAR2) IS
2 v_thing VARCHAR2(10);
3 get_records SYS_REFCURSOR;
4 BEGIN
5   IF (v_action = 'DO THIS') THEN
6   OPEN get_records FOR
7   SELECT 1 FROM dual;
8   ELSE
9   OPEN get_records FOR
10   SELECT 2 FROM dual;
11   END IF;
12
13 LOOP
14   FETCH get_records INTO v_thing;
15   EXIT WHEN get_records%NOTFOUND;
16   /* do things */
17 dbms_output.put_line(v_thing);
18   END LOOP;
19   CLOSE get_records;
20 END;
21 /
Procedure created
SQL> exec get_records ('DO THIS');
1
If I call this procedure it is populating data but , if I register it in oracle apps I am not getting data   can any one help
also I replaced dbms_output.put_line with fnd_file.put_line , still it is not populating data

This seems to be like a SQL*Plus report. Please port this query in SQL*Plus community.

Batch characteristic value not populated!

Hello guys,
please would appreciate advice to following:
I created two reference chars z_goods_receipt (MCH1-LWEDT) and z_created_on (MCH1-ERSDA). Chars assigned to material batch class. During GR in Classification Dates (chars values) are visible, but after GR is saved, in batch chars values are not populated.
Consequently, I can not use these chars in sorting criterium for delivery batch determination - batches are not sorted acocrding to dates.
Batches on material level. In Customizing (Classify batches within goods mvt), for mvt 101 setting is 4 (Classification always in foreground (all batches)) - but bug remains even if i try with other options. Check with developer shows not much help from EXIT_SAPMM07M_004 or EXIT_SAPMM07M_004 or EXIT_SAPLV01Z_012.
Any idea how to populate these chars in batch?
Alternatively, what else I could use in order to enable FIFO batch determination for batches in delivery?
Thanks for prompt replies!
Br, Jan

Hello,
SAP reply -standard behaviour. After save in MSC2n values read from MCH1, after that in MSC3N value read from AUSP.
Issue solved using non reference charactereristic and adding code into ZXMBCU04.
Br, Jan

Data not populating after DS enhancement

HI pros,
i have made Data source enhancement.
i wrote the code in include program.
when '0FI_GL_40'.
CHECK NOT c_t_data[] IS INITIAL.
LOOP AT c_t_data ASSIGNING <fs_data5>.
SELECT SINGLE matnr FROM bseg INTO <fs_data5>-ZZMATNR
                         where BUKRS eq <fs_data5>-BUKRS and
                               BELNR eq <fs_data5>-BELNR and
                               GJAHR eq <fs_data5>-GJAHR and
                               BUZEI eq <fs_data5>-BUZEI.
endloop.
but the data not populating into the report, the Multi provider is real time
krish..

Hi,
Syntax
ASSIGN mem_area TO <fs> casting_spec range_spec.
Effect
This statement assigns the memory area specified using mem_area to the field symbol <fs>. You can assign a data object or a memory area calculated from the address of a data object. After the assignment, the field symbol refers to the assigned memory area and can be used in operand positions. When used in a statement, it behaves like a dereferenced data reference, meaning that the statement works with the content of the memory area.
The data type with which the assgigned memory area is treated, depends on the specifications in casting_spec. You can either execute an explicit casting or the field symbol takes on the data type of the data object specified in the assignment. A field symbol to which a memory area is assigned, has this data type after the assignment and behaves like a data object of this type.
The assigned memory area mem_area must be at least as long as the data type specified in casting_spec and must have the same alignment. If the data type determined in casting_spec is deep, the deep components with their type and position must appear in the assigned memory area exactly like this.
Use the specifications in range_spec to restrict the memory area that can be assigned to the field symbol.
You have to assign it back to internal table to modify the content.
Check in debug mode if you have still doubt.
regards,
Raju

Material number is not populating in PO in tcode ME23N

Hi,
The material number is not populating in PO in transaction ME23N. The coloumns is displaying as blank and supressed(Gray).
This problem occured during the upgradation from 4.6C to ECC6.0.
We have checked the SPRO configuration for field selections and these are not having any problem.
Data is updated in database tabes but it is not displayed in ME23N screen.
Please advice.
Thanks,
Rakesh

check OSS Note 492757 - ME21N/ME52N: You cannot set field selection for material
maybe it helps to solve your issue

Line Item Field "Assignment" not populating

I am posting a KR doc. The assignment field in the line item is not populating with the date on the document is being posted in either of the line items, posting key 31 posting to Vendor and posting key 40 posting to an expense G/L account. The assignment field remains empty. I have checked some documents in the other company codes where this field is being populated with the date in the yyyymmdd.
Please let me know what controls this and how can I make this field populate.

Th Sory key for the GL for that company code should have the document date as the sort key.... check in FS00

Sale Order Item Quantity Not Populating When Create A Sale Order Using BAPI

I am having a problem when creating a sale order using BAPI
BAPI_SALESORDER_CREATEFROMDAT2
Problem is that sale order item quantity field is not populating
code is as follows
ORDER_ITEMS_IN-ITM_NUMBER = '0010'.
ORDER_ITEMS_IN-MATERIAL = '000000000010000262'.
ORDER_ITEMS_IN-TARGET_QU = 'LB'.
ORDER_ITEMS_IN-TARGET_QTY = 1.

Hi,
Try populating ORDER_SCHEDULES_IN table in the bapi field REQ_QTY.
Regds,
Rudra

0PM_ORDER - WBS element not populated by extractor

Hi all
Just wondering if anyone has experienced a similar problem.
We use this data source as part of our PM master data loads. It runs every night, no problem. Iu2019m busy with a new user requirement regarding Project (WBS) costs as posted on PM orders, and I was pleased to see that 0PM_ORDER has field PROID (WBS) on it already u2013 thought I was half way to building my query!
Except, the field is not populated. Even when I run the extractor on the R/3 system to test (for an order type PM05 on which WBS element is a required entry), I never get any values in this field. I had a look on SDN and OSS and have seen a number of posts about the conversion exits relating to WBS elements, but this presupposes that a value is being populated in the extractor, which in my case is not happening.
Does anyone have any suggestions?
Regards, Lara

0PM_Order extracts the data of WBS element on the tab "location" on the PM order (IW33). It doesnt extract the WBS element on the tab "Additional data".
I am not sure how these WBS elements are different, your PS consultant might have an answer. Either you can have user exit to fill this field or ask your ECC abap consultant to fill the same in both fields of order, if doesnt make any difference. I am also in same situation, keep me posted if you have have get any new information from your PS consultant or SAP.

BW statistic cube not populating

Similar Messages

Maybe you are looking for