BW system refresh

Hi All,
We are facing issue in system refresh.
Major Steps performed
1) restored prod db to qas.
2) before bringing up the application deleted rfc tables
3) after bringing application back imported the rfc tables back into system
4) run bdls for BW system BWPCLNT100-BWQCLNT100 but not for R3
5) created back the connection in RSA1
I got to know that we don't have to delete rfc, and run bdls for r3(source
system) too before retaining rsa1 but we missed the step, now if we run
bdls for r3 and execute rsa1 and restore and activate would it help us in
getting the desired refreshed system.
Please suggest.
thanks,
Mridul

Yes, you need to BDLS for R/3 logical system in the target BW system(once this is done run RSA1 )
Also no need to delete the RFC's ,simply you import the RFC's that were exported before refresh from the targget system.
Regards,
Srini Chapa.

Similar Messages

Unable to login in EP 6.0 after system refresh

After performing the system refresh of EP 6.0, completed the post system copy steps.
Imported the new certificated as well, when I try to login the page is getting refresh but remains on the same page.
please help me what could be the reason.

Hi Abdul.
I think you have selected the Algorithm as RSA, which is the default one.<br />
Please change it to DSA and hope the issue will be solved.
Regards,
Satish

Logical System Conversion after system refresh failed

Hello,
Logical System Conversion after system refresh couldn't complete as the printer was locked. This job was run in the background. In SM37, the job log of RBDLSMAP shows as job finished, but it took only 40 seconds. Now I see that the logical system got changed(Converted) in the client settings scc4 but I know that this client being a production client and would run for couple of hours. Here is the job log information.
02/18/2009 16:09:33 Job started                                                                     00           516          S
02/18/2009 16:09:33 Step 001 started (program RBDLSMAP, variant &0000000000000, user ID ABCD)      00           550          S
02/18/2009 16:09:33 Output device PRN1 is locked in the SAP system                                  PO           349          I
02/18/2009 16:10:19 Job finished                                                                    00           517          S
When try to rerun bdls again, it shows that it is already available and it says "The new logical system name is already assigned to the current client".
Any suggestions on this?
Thanks,
Mahesh

Hi ,
Rerun the BDLS again as this took very little time.
When you try to run again it popsup message saying it already exists just delete that and again put the Logical system name and run it will run that time.
May be while scheduling the job you gave for spool I am not sure why is it looking for Printer which is locked.
Thanks.

How to handle the CRM Middleware after system refresh?

Guys,
We are using CRM 5.0 & R/3 4.6C. We have the middleware configured and set up. We finished all inital loads & delta loads are activated as well. The system works perfectly.
Now for some reason the client wants to refresh the R/3 system. (Basically they are copying over the R/3 Dev system to refresh the R/3 Sandbox system. Our connection is currently between the 2 sand box systems) What impact will this have on the CRM system? Will it cause mass delta downloads? I have already referred to notes 588701 & 765018. Any additional information or watch outs will be appreciated.
Secondly what's the best practice do a refresh in the future? Is there a SAP recomendation on how to go about with system refresh when CRM & R/3 are connected?
ARP

Hello ARP,
as always: It depends what to do:
a) do you have a CRM DEV System available? If possible you should get the connection working over there and then do a Landscape Copy of the R/3 DEV + CRM DEV to the Sandbox Landscape.
b) Let them copy the R/3 DEV to the R/3 Sandbox. Then use the Data Integrety Manager (Transaction SDIMA) to get the missing Customers, Transactions exchanged.
In the future they normally have to do a Landscape Copy.
Regards
Gregor

Windows 8.1 will not activate on HP19-2113w after system refresh.

Everything was working fine on my PC. Then the other day it crashed and said there was a disk error and that it had to scan the whole drive to find the error. It finished scanning, but windows 8.1 would not load sucessfully. Therefore I did a system refresh thru HP recovery. After doing that windows would start up normally, but I lost my activation. When I tried to activate the response was "Key doesn't work try again later" or something like that. Kept trying, no luck. I thought it may have been an error with the system refresh, so I did the total system reset (after saving personal data). Now I am having the same problem with activation, and If I try to navigate the normal way to the activation screen, the screen disapears. I can get to activation using command prompt. but key still does not work. The key I am using I retrived from my BIOS data. Also, I ran the refresh and reset from the origional hard drive partition. I hope someone has a solution to this. Thanks is advance Bill

Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how your desktop computer will not activate after performing a system refresh, and I would be happy to assist you in this matter! In order to correct this issue, I suggest following the steps in this resource on Windows 8 product activation, which should help to activate Windows 8.1 on your system. Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards

Steps for System Refresh for ABAP + JAVA stack

Hi friends,
I am newbie to SAP BASIS adminstration. There is a system refresh activity planned shortly.
Can someome pls let me know the steps for system refresh of ABAP + JAVA stack??
regards,
Ambarish.

Please check [systemcopy@SDN|System Copy and Migration] and [guides|http://service.sap.com/instguidesnw] according to your release.

System Refresh: Abap+Java stack

Have a few questions about CRM refresh I'm working on. Done many refreshes over the years and the new process has me shaking my head in disbelief.
Performed a normal system refresh, by restoring online backup of production system onto mirror system. The mirror system exactly matches my production sytem (Oracle 10g, SuSE Linux 64 bit, UNICODE).
Now my system is running from Abap stack perspective, however Java components fail to load.
Now from reading the documentation (System Copy for SAP, Based on SAP Netweaver 2004s Abap+Java) it appears that I have to use sapinst and no longer use online database backups for system refreshes.
Is this the case? Has the investment my organization made into online backups now worthless?
Is there a way to take the java schema in this online copied database and bring it online after converting it to work on the mirror landscape?
Or should I throw out our system methodology and start new

Thank you for the reply.
Reading SAP's documentation seems to imply that I need to extract out the java schema from my production source and then re-install on my QA target to make a refresh of the java stack possible.
However, if I have a complete copy of my source system database working on the target, why is the extract necessary?
At least, I should be able to extract out the contents from the source as if it was the target, thereby eliminating any sort of production outages (we have many constraints about shutting down production from fuctional perspective).
I'll do some research around the other tools mentioned to see if they can lend a hand fixing the issue,

Post System Refresh Activity - BDLS run

Hi,
We have finished system refresh of a QA system from Production. We need to run BDLS now to convert the original Production logical systems to QA relevant logical systems.
I am short of understanding of this process. Can anyone please help me with the concept and process?
Thanks in advance,
Abdul

Hi Abdul Rahim Shaik,
BDLS will convert the logical system name for your PROD to QAS.
For eg:
Your source - PRDCLNT100
Your target - QASCLNT100
If you go to SCC4 in your QAS, u will see Prod logical system name for the client.
Once you run BDLS after system copy, logical system name exist in every table for PRDCLNT 100 will change to QASCLNT100.
Refer to below link for more info:
http://help.sap.com/saphelp_nw04/helpdata/en/33/c823dbaea911d6b29500508b6b8a93/frameset.htm
Cheers,
Nicholas Chang

BDLS in system refresh

HI all
I did a system refresh of BI .After running BDLS the logs in BDLS shows success. But logical systems are not getting converted.When I checked in SLG1it shows no coversion has taken place. Can any one help me to proceed further and change my logical system
Regards
-aj_

> Oh ok thanks but this was already done. what I mean to tell is If I run BDSL it is showing successful .When I check BDLS logs in SLG1 it is showing error. WHy this happens and what can be done?
Without knowing the error that you see how should we help you?
Markus

System Refresh problem - request/task does not exist

I have a problem after system refresh, and when I am trying to import users and roles, I get the message - request/task XXXXXXX does not exist.
Data/cofile are present.
Can someone help me please ?
Thanks in advance,
Jordan

I got it ... in SCC4, the client role must have been set to TEST instead of PRODUCTION, since the refresh is on Quality.

Sender File Comm Channel Fails after system refresh

Hi,
we did a system refresh of our PI system and since then the sender file communication channels donot work with the following exception:
Error: com.sap.aii.af.ra.ms.api.ConfigException: Some of the IS access information is not available. SLDAcess property may be set to true, but SLD is not available.
I have seen many threads in this forum related to this issue but couldn't find a proper solution.
Any help is very much appreciated.
Thanks
MLS

You may do the following:
1. Perform SLDCHECK on XI.
2. Check if XIAFUSER is not locked or its password has been changed recently.
3. Goto SLD-> Business sytems-> Integration server, check Pipeline URL. It should be
http://hostname:8000/sap/xi/engine?type=entry
Regards,
Prateek

CUA - System Refresh

Hello,
I am new to CUA and need help in determining the pre and Post steps for CUA during the System Refresh. The System Refresh is performed on the Child System and after the Refresh my original users and Role assignments have to overwrite the users and Role Assignments of the Copying System.How do I retain my original User data ?
Are their any guidelines to this process ?
I am researching oss and forums,and so far I don't have any clear procedure.
thanks,
Farah

Hello Farah,
I think by system refresh you mean system copy.
From system copy perspective follwing steps need to be taken:
pre copy steps:
1. Disconnect CUA. Please go to the child system. Go to TRANSACTION BD64 and delete the ALE model view for CUA.
Subsequently go to parent system. Then to transaction SCUA. In menu bar go to Distribution model and then to Delete. Choose the radiobutton Child System and then give the logical name of the child system.
Post system copy activties:
1. in case the system copy has been performed from parent system of CUA to child system then go to child system and then goto BD64. Delete the exisitng ALE model for CUA. If parent system is not the source system of CUA you can ignore this step. Next Login to parent system. Go to SCUA then change mode and then add the logical system name of child system to it.Next go to SCUG and do user master reconcilliation.for this double click on child system and then under do transfer users wherver it is available.
Frankly these are ideal steps after system copy ahich I follow since there is not much disparity in user master data across systems in my CUA. So even if system copy happens the user master data in child system remains more or less the same.
If at all there is a minor difference I adjust it through SU01 or SU10. However in case there is a major difference then you it becomes a bit complicated. reasons being system copy wil overwrite entire stuff. Whether it is CUA or any other data. Say for example a child role exisits in child system but is not in the source system of system copy then it wont be present after system copy. if there are such issues then let us know. May be we can think
something. otherwise this approach should do the job for you.
Please award points if you found the anwers useful.
regards.
Ruchit.

SAP APO SYSTEM REFRESH

Hi All,
We are going for a system refresh from PRD to DEV in our SAP SCM-APO 7.0 , Live Cache 7.7,The SCM system runs on a DB6 platform with Windows OS, and the DEV is similar to PRD in terms of OS n DB, but am i a little bit confused because it looks like in PRD both SCM & Live Cache are in the same server but in DEV its on different server.How do it go about it,please give ur valuable suggestion from scratch
Thanks,
Vivek

Alex,
Those books that you 'found' are classroom textbooks; and they are generally only made available to students who are taking the underlying class.
For these classes, SAP loads data into their training systems that support the classroom curricula, prior to the start of each class.
So, the easy answer is "take the SAP class". If you take the class, SAP will provide you with a new copy of the course material, and once you are in the classroom, you are generally provided with access to their training system, which is consistent with the course material.
SCM200 - Business Processes in Planning (SAP SCM) | SAP Training and Certification Shop
SCM210 - Core Interface (CIF) | SAP Training and Certification Shop
Best Regards,
DB49

ORA-01017: invalid username/password; logon denied quality system refresh from production

Dear All;
I am in the post activities of SAP system refresh.
I restored the system using brtools successfully as you can see below:
then I went with the rest of the steps based on sap recomendations, and reached to SAP sql queries:
CREATE USER "OPS$<DOMAIN>\<SID>ADM" DEFAULT TABLESPACE SYSTEM TEMPORARY TABLESPACE PSAPTEMP IDENTIFIED EXTERNALLY;
CREATE USER "OPS$<DOMAIN>\SAPSERVICE<SID>" DEFAULT TABLESPACE SYSTEM TEMPORARY TABLESPACE PSAPTEMP IDENTIFIED EXTERNALLY;
GRANT CONNECT, RESOURCE, SAPDBA TO "OPS$<DOMAIN>\<SID>ADM";
GRANT CONNECT, RESOURCE, SAPDBA TO "OPS$<DOMAIN>\SAPSERVICE<SID>";
CREATE TABLE "OPS$<DOMAIN>\<SID>ADM".SAPUSER (USERID VARCHAR2(256), PASSWD VARCHAR2(256));
INSERT INTO "OPS$<DOMAIN>\<SID>ADM".SAPUSER VALUES ('SAPSR3', '<Password>');
CREATE SYNONYM "OPS$<DOMAIN>\SAPSERVICE<SID>".SAPUSER FOR "OPS$<DOMAIN>\<SID>ADM".SAPUSER;
CONNECT /
GRANT SELECT, UPDATE ON "OPS$<DOMAIN>\<SID>ADM".SAPUSER TO "OPS$<DOMAIN>\SAPSERVICE<SID>";
CONNECT /as sysdba
GRANT CONNECT, RESOURCE TO "OPS$<DOMAIN>\SAPSERVICE<SID>";
GRANT CONNECT, RESOURCE TO "OPS$<DOMAIN>\<SID>ADM";
I checked if all users are on opened state using select USERNAME,ACCOUNT_STATUS from dba_users;
The database is running file, and it is opened, but when I run R3trans -d it gives me RC 12 and i get this error:
*** ERROR => CONNECT failed with sql error '1017'
set_ocica() -> SQL error code 1017
-->oci_get_errmsg (con=0, rc=1017)
OCIErrorGet -> SQL error code: 1017
ORA-01017: invalid username/password; logon denied
DbSlConnect(con=0) -> orc=0, 99=DBSL_ERR_DB
***LOG BY2=>sql error 1017   performing CON
***LOG BY0=>ORA-01017: invalid username/password; logon denied
I used brconnect -u / -f chpass -o PSAPSR3 -p sap so i can reset the password, but still I am getting the same invalid username or password error.
I checked the listener status, and it is running.
Kindly let me know how I can fix my error
Best Regards
~Amal Aloun

Dear Gaurav;
I am running SAP Kernel 720 64bit unicode PL300
The content of my trans log file is the following:
4 ETW000 r3trans version 6.23 (release 720 - 15.05.12 - 20:12:03).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time   : 05.08.2014 - 17:50:30
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [     dev trc,00000] Tue Aug 05 17:50:30 2014                                                 149 0.000149
4 ETW000 [     dev trc,00000] db_con_init called                                                        27 0.000176
4 ETW000 [     dev trc,00000] set_use_ext_con_info(): rsdb/ssfs_connect not set => ssfs not used        41 0.000217
4 ETW000 [     dev trc,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000                                                                                                  28 0.000245
4 ETW000 [     dev trc,00000] create_con (con_name=R/3)                                                 14 0.000259
4 ETW000 [     dev trc,00000] Loading DB library 'dboraslib.dll' ...                                    44 0.000303
4 ETW000 [     dev trc,00000] DlLoadLib success: LoadLibrary("dboraslib.dll"), hdl 0, addr 000007FEF1650000
4 ETW000                                                                                                 947 0.001250
4 ETW000 [     dev trc,00000]      using "E:\usr\sap\TST\SYS\exe\uc\NTAMD64\dboraslib.dll"               18 0.001268
4 ETW000 [     dev trc,00000] Library 'dboraslib.dll' loaded                                            19 0.001287
4 ETW000 [     dev trc,00000] function DbSlExpFuns loaded from library dboraslib.dll                    23 0.001310
4 ETW000 [     dev trc,00000] Version of 'dboraslib.dll' is "720.00", patchlevel (0.215)               242 0.001552
4 ETW000 [     dev trc,00000] function dsql_db_init loaded from library dboraslib.dll                   26 0.001578
4 ETW000 [     dev trc,00000] function dbdd_exp_funs loaded from library dboraslib.dll                  34 0.001612
4 ETW000 [     dev trc,00000] New connection 0 created                                                 237 0.001849
4 ETW000 [     dev trc,00000] 0: name = R/3, con_id = -000000001, state = DISCONNECTED, tx = NO , bc = NO , hc = NO , perm = YES, reco = NO , frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO , prog =
4 ETW000                                                                                                  56 0.001905
4 ETW000 [     dev trc,00000] db_con_connect (con_name=R/3)                                             20 0.001925
4 ETW000 [     dev trc,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000                                                                                                  25 0.001950
4 ETW000 [     dev trc,00000] find_con_by_name found the following connection:                          16 0.001966
4 ETW000 [     dev trc,00000] 0: name = R/3, con_id = 000000000, state = DISCONNECTED, tx = NO , bc = NO , hc = NO , perm = YES, reco = NO , frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO , prog =
4 ETW000                                                                                                  36 0.002002
4 ETW000 [     dev trc,00000] -->DbSlConnect(vers=-1, type=0, env='[default env]', userid='[default usr]')
4 ETW000                                                                                                  53 0.002055
4 ETW000 [     dev trc,00000] DIR_CLIENT_ORAHOME is not set as profile nor env. parameter.             574 0.002629
4 ETW000                        Assuming using instant client with unspecified location.
4 ETW000 [     dev trc,00000] Register application info.                                                97 0.002726
4 ETW000 [     dev trc,00000] Oracle client version: 10.2.0.4.0, (dbsl 720 220612, UNICODE[2])       10033 0.012759
4 ETW000 [     dev trc,00000] Detailed Oracle client (patch) info not available.                        30 0.012789
4 ETW000 [     dev trc,00000]    Default connection: tnsname ='TST'                                      73 0.012862
4 ETW000 [     dev trc,00000] -->oci_initialize(con=0, char='UTF16', nchar='AL16UTF16', nls=-1),uc_ln=2
4 ETW000                                                                                                  50 0.012912
4 ETW000 [     dev trc,00000] OCIEnvCreate(mode=16384=OCI_UTF16) returned 0 (for default NLS handle)
4 ETW000                                                                                                1828 0.014740
4 ETW000 [     dev trc,00000]     OCIHandleAlloc(OCI_HTYPE_ERROR, con=0, ErrHp=027944B0)                 58 0.014798
4 ETW000 [     dev trc,00000]     OCIHandleAlloc(OCI_HTYPE_ERROR, con=0, ErrBt=02796088)                 36 0.014834
4 ETW000 [     dev trc,00000] NLS env. settings: lang=41004D00450052004900430041004E00                 167 0.015001
4 ETW000 [     dev trc,00000]                     terr=41004D0045005200490043004100                      29 0.015030
4 ETW000 [     dev trc,00000]                     char=55005400460031003600                              22 0.015052
4 ETW000 [     dev trc,00000] Client NLS setting (by OCINlsGetInfo(con=0)): 'AMERICAN_AMERICA.UTF16'
4 ETW000                                                                                                  43 0.015095
4 ETW000 [     dev trc,00000] charset='UTF16', ncharset='AL16UTF16', UNI_ASC=FALSE                      19 0.015114
4 ETW000 [     dev trc,00000] Logon as OPS$-user to get SAPSR3's password                               28 0.015142
4 ETW000 [     dev trc,00000] Connecting as /@TST on connection 0 (nls 0) ... (dbsl 720 220612, UNICODE[2])
4 ETW000                                                                                                  61 0.015203
4 ETW000 [     dev trc,00000]     OCIHandleAlloc(OCI_HTYPE_SVCCTX, con=0, svchp=02795F48)               370 0.015573
4 ETW000 [     dev trc,00000] Allocating server context handle                                          31 0.015604
4 ETW000 [     dev trc,00000] Attaching to database server TST (con=0, svchp=02795F48, srvhp=0279EFF8)
4 ETW000                                                                                                  74 0.015678
4 ETW000 [     dev trc,00000] Assigning server context 0279EFF8 to service context 02795F48          30008 0.045686
4 ETW000 [     dev trc,00000]     OCIHandleAlloc(OCI_HTYPE_SESSION, con=0, usrhp=027ABBE0)               86 0.045772
4 ETW000 [     dev trc,00000] Starting user session: OCISessionBegin(con=0, usr='/', svc=02795F48, srv=0279EFF8, usr=027ABBE0)
4 ETW000                                                                                                  40 0.045812
4 ETW000 [     dev trc,00000]     OCISessionBegin(OCI_DEFAULT) failed with -1=OCI_ERROR               28164 0.073976
4 ETW000 [     dev trc,00000]     OCISessionBegin(OCI_DEFAULT) failed with SQL error 1017:               95 0.074071
4 ETW000 [     dev trc,00000]     ORA-01017: invalid username/password; logon denied
4 ETW000                                                                                                  39 0.074110
4 ETW000 [    dbsloci.,00000] *** ERROR => CONNECT failed with sql error '1017'                         38 0.074148
4 ETW000 [     dev trc,00000]     set_ocica() -> SQL error code 1017                                     19 0.074167
4 ETW000 [     dev trc,00000] -->oci_get_errmsg (con=0, rc=1017)                                        20 0.074187
4 ETW000 [     dev trc,00000]     OCIErrorGet -> SQL error code: 1017                                    57 0.074244
4 ETW000 [     dev trc,00000]     ORA-01017: invalid username/password; logon denied
4 ETW000                                                                                                  39 0.074283
4 ETW000 [     dev trc,00000] Info: 99=DBSL_ERR_DB, oerr=1017, try to connect with default password.
4 ETW000                                                                                                  38 0.074321
4 ETW000 [     dev trc,00000] Connecting as SAPSR3/<pwd>@TST on connection 0 (nls 0) ... (dbsl 720 220612, UNICODE[2])
4 ETW000                                                                                                  30 0.074351
4 ETW000 [     dev trc,00000] Assigning username to user session: con=0, usrhp= 027ABBE0                23 0.074374
4 ETW000 [     dev trc,00000] Assigning password to user session: con=0, usrhp=027ABBE0                 36 0.074410
4 ETW000 [     dev trc,00000] Starting user session: OCISessionBegin(con=0, usr='SAPSR3', svc=02795F48, srv=0279EFF8, usr=027ABBE0)
4 ETW000                                                                                                 133 0.074543
4 ETW000 [     dev trc,00000] Tue Aug 05 17:50:40 2014                                             9992977 10.067520
4 ETW000 [     dev trc,00000]     OCISessionBegin(OCI_DEFAULT) failed with -1=OCI_ERROR                  33 10.067553
4 ETW000 [     dev trc,00000]     OCISessionBegin(OCI_DEFAULT) failed with SQL error 1017:               85 10.067638
4 ETW000 [     dev trc,00000]     ORA-01017: invalid username/password; logon denied
4 ETW000                                                                                                  37 10.067675
4 ETW000 [    dbsloci.,00000] *** ERROR => CONNECT failed with sql error '1017'                         29 10.067704
4 ETW000 [     dev trc,00000]     set_ocica() -> SQL error code 1017                                     19 10.067723
4 ETW000 [     dev trc,00000] -->oci_get_errmsg (con=0, rc=1017)                                        18 10.067741
4 ETW000 [     dev trc,00000]     OCIErrorGet -> SQL error code: 1017                                    55 10.067796
4 ETW000 [     dev trc,00000]     ORA-01017: invalid username/password; logon denied
4 ETW000                                                                                                  52 10.067848
4 ETW000 [     dev trc,00000]     DbSlConnect(con=0) -> orc=0, 99=DBSL_ERR_DB                            22 10.067870
4 ETW000 [    dblink ,00000] ***LOG BY2=>sql error 1017   performing CON                               58 10.067928
4 ETW000 [    dblink ,00000] ***LOG BY0=>ORA-01017: invalid username/password; logon denied            22 10.067950
2EETW169 no connect possible: "DBMS = ORACLE                           --- dbs_ora_tnsname = 'TST'"
Best Regards
~Amal Aloun

Post system refresh, "Request IDoc : IDoc with errors added"

Hello All,
Post system refresh, we are not able to execute the data loads.
While loading the Infopackage, the overall status is still showing in YELLOW status. but in the Transfer (IDOCs & TRFC), it shows an Error message as "Request IDoc : IDoc with errors added"
Yesterday immediately after the refresh, we were able to execute the master data loads (full loads)...
However, transaction loads (delta) is facing issues.
Today, we are facing the problem in both master and transaction data.
Please help!!!! Its a very critical issue!!!
Edited by: Siegfried Szameitat on Aug 9, 2011 10:17 AM

Hi,
While selecting the Infopackage to run the INIT load, it is taking me to the ECC login screen. Once i enter my credentials, its showing a dump with the message:
Short text of error message:
No RFC authorization for user XXXXX ( RSA8 ).
Long text of error message:
Technical information about the message:
Message class....... "RSAR"
Number.............. 051
Variable 1.......... "No RFC authorization for user XXXXX ( RSA8 )."
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Please advice.
Regards
sneha

IDOC Tables with Errors Post System Refresh

Hi Everyone,
Is there any Report or other way through which one can get List of IDOC Tables with Errors Post System Refresh.
Thanks,
Regards,
- Ishan

Hi,
While selecting the Infopackage to run the INIT load, it is taking me to the ECC login screen. Once i enter my credentials, its showing a dump with the message:
Short text of error message:
No RFC authorization for user XXXXX ( RSA8 ).
Long text of error message:
Technical information about the message:
Message class....... "RSAR"
Number.............. 051
Variable 1.......... "No RFC authorization for user XXXXX ( RSA8 )."
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Please advice.
Regards
sneha

BW system refresh

Similar Messages

Maybe you are looking for