Bypassing integration engine in pi 7.0

Hi
Am supposed to work on bypassing the integration engine in case of file to Jdbc. Am working on version pi 7.0. How can I bypass integration engine ?

hi,
Am supposed to work on bypassing the integration engine in case of file to Jdbc. Am working on version pi 7.0. How can I bypass integration engine ?
as per my knowledge(bypassing the integration engine in case of file to Jdbc) that is possiable from pi 7.1 by using ICO(AAE) concept only .
thanks,

Similar Messages

Auto Cancellation of Messages in the Integration Engine.

Dear all,
Issue: Auto Cancellation of Messages in the Integration Engine.
Description: Actually Today, I'm facing Problem in message mapping and its showing error "JCO_SYSTEM_FAILURE". Finally the message is Auto Canceled and showing the status in the Message Monitoring as Canceled with Errors.
I have doubt here how the messages are Auto Canceled with Error? Is there any system or ABAP program which cancelling these messages?
Waiting for yours valuable reply on the above issueu2026
Edited by: BhavinPatel on Oct 7, 2010 8:15 AM

Hi Bhavin,
Two report program are there to cancel error msgs automatically..
1) RSQIWKEX
2) RSXMB_CANCEL_MESSAGES
Regds,
Pinangshuk.

Error while testing message from Integration Engine.

Hi,
Trying to send message to Integration engine from RWB, using test mesage tab in Integration engine.
I pasted the payload(IDOC payload) , entered sender service, interface name and namespace and also username and password. Selected quality of servie as Exactly once.
While sending the message getting the following error - "Error while sending".
What could be possible reasons for this error.
Thanks.

Hi,
Please check the following possibilities:
1. Make sure you have selected integration Engine oprtion and not the adapter engine.
2. The USERID and password should be correct.
Please let me know if you still face the problem.
Regards,
Shwetambari.

Java bean, works in Integration Engine but does not work in Adapter Engine.

In connection to the following thread:
PayloadZipBean - variable filename inside the archive
I am trying to use the same bean.
However I can see, that the bean is working correctly when I use Integration Engine.
But if I am using ICo (AAE) and using the same bean in the receiver, I can see, that the bean gets called but does not work correctly.
The audit log added to my bean shows, that the bean could read the filename correctly from the Dyanic Config in the message, but it cannot write the same into the message.
Could you please help on this?

Your above posted system details show multiple Java Console extensions.
You can uninstall (remove) the Java Console extensions and disable the Java Quick Starter extension, you do not need them to run Java applets.
See http://kb.mozillazine.org/Java#Multiple_Java_Console_extensions
See also http://www.java.com/en/download/help/quickstarter.xml - What is Java Quick Starter (JQS)? What is the benefit of running JQS? - 6.0
Disable the Java Quick Starter extension: Tools -> Addons -> Extensions
Control Panel -> Java -> Advanced tab -> Miscellaneous -> Java Quick Starter (disable)
You can try a direct connection: 
Control Panel > Java > General tab > "Network Settings...": "Direct Connection" (enable)

Problems with namespace XML Parsing of ABAP PI 7.0 Integration Engine

Hi,
I discovered the following problem.
The customer sends a SOAP message with is forwarded through a SOAP Adapter in the integration engine.
The structure of the message is very simple:
<Envelope>
<Body>
<ORDERS05>...</ORDERS05>
</Body>
</Envelope>
The customer adds the namespace information a special way:
<Envelope xmlns="http://schemas.xmlsoap.org/soap/envelope">
<Body>
<orders05 xmlns="">...</orders05>
</Body>
<Envelope>
Here the namespaces is declared in the first element. It should be inherited into all child elements. The 'orders05' should not have the namespace ' xmlns="http://schemas.xmlsoap.org/soap/envelope" ', therefore the namespace is overwritten with ' xmlns="" '. However I don't know if this is a correct xml statement, the SAP system did not understand this.
The integration throws an error which is stated in the message in the adapter engine:
2008-11-06 17:31:44 Fehler SOAPFault empfangen vom Integration Server. ErrorCode/Category: XIProtocol/ITEM_MISSING; Params: /@mustUnderstand, ST: ST_XMS_MSGHDR30_RM; AdditionalText: Attribut 'mustUnderstand' erwartet; ApplicationFaultMessage: ; ErrorStack: Das XML-Element /@mustUnderstand fehlt im SOAP-Message Header (SAP XI Extension) Attribut 'mustUnderstand' erwartet
2008-11-06 17:31:44 Fehler Fehler beim Übertragen der Message zum Endpunkt http://kas052.hauni.koerber.de:8036/sap/xi/engine?type=entry über die Verbindung SOAP_http://sap.com/xi/XI/System. Grund: com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 500 : Error during parsing of SOAP header
If I changed the SOAP message to the common format, it is accepted by the integration engine.
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope">
<SOAP:Body>
<orders05>...</orders05>
</SOAP:Body>
</SOAP:Envelope>
Here the namespace ' xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope" ' is defined with a prefix and assigned to the elements 'envelope' and 'body'. The 'orders05' element has no namespace.
However due to the xml syntax both messages are the same, so why the integration engine handle the messages different?
Best regards,
Nils Kloth

The valid SOAP format supported by XI is as follows
<SOAP:Envelope
xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Body>
 <m:MessageTypeName xmlns:m="Some-URI">
 <Price>34.5</Price>
 </m:MessageTypeName>
</SOAP:Body>
</SOAP:Envelope>
Ur sender system is not sending the data in correct Soap format and thats the cause of message rejection. The option you have to use the Soap adapter in "no soap" mode.
Regards,
Prateek

Error in integration Engine

Hi All,
In integration Engine im getting error as "Exception occurred during XSLT mapping of the application".
when i tried to test the mapping its showing the warning as "javax.xml.transform.TransformerException: com.sap.engine.lib.xml.util.NestedException: Could not execute operation on Java Object. -> java.lang.reflect.InvocationTargetException at "
Please help me reagrding this issue to proceed further!!!

Hi,
Can u please explain the problem little detail...
Are u getting this error in SXMB_MONI??
If yes then can u copy the source payload and check it in the Message Mapping once??
If problem is coming from mapping... try to analyze.. else u can put now vtz exactly the prblm is..
Babu

HTTP error 403 from Integration engine

Hello,
Problem a)
While posing data from eSourcing to PI box by HTTP , we are getting HTTPerror 403.
The error message states:
ID: E-Sourcing was unable to publish PROP-00090--2010 to ERP. class java.io.IOException Server returned HTTP response code: 403 for URL:
Problem b)
In another observation the sender file adapter after polling the file is unable to send the message to Integration engine and gives a Connection Time out error. it gives the following error.
Transmitting the message to endpoint http://<Host>:<Port>/sap/xi/engine?type=entry using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error transmitting the message over HTTP. Reason: java.net.ConnectException: Connection timed out: connect.
I believe that both the errors are for common cause and possibly the Integration engine is not accepting HTTP request.
It looks like these error due to security reason, it seems some authorization profile is missing or may be some other issue,kindly help us at that front.
Thanks and Regards,
Satish

Hi Suraj,
Thanks for the update.We had checked the URL before posting this message,it is picking up correct URL with namespoace, UID and PWD.Exact error that we are getting is as follows:
ID: E-Sourcing was unable to publish PROP-00090--2010 to ERP. class java.io.IOException Server returned HTTP response code: 403 for URL: http://MB1ES1025:50200/sap/xi/adapter_plain?namespace=http://frictionless.esource.com/v2.0&interface=MI_ESI_AWARD_PO&service=FCI_TENANT&QOS=BE&sap-user=pisuper&sap-password=sap$29&sap-client=001&sap-language=EN. Please contact your system administrator.
Here all information are correct.We have checked the SLD check, that is also working fine.Also it is not connectivity related issue, as we are able to transmit XML file to E-Sourcing.
It looks like security issue, but what authorization needs tobe given exactly for HTTP call, we need to know or may be some other issue.
Thanks and Regards,
Satish

HTTP error 403 to Integration engine

Hello,
Problem a)
While posing data from eSourcing to PI box by HTTP , we are getting HTTPerror 403.
The error message states:
ID: E-Sourcing was unable to publish PROP-00090--2010 to ERP. class java.io.IOException Server returned HTTP response code: 403 for URL:
Problem b)
In another observation the sender file adapter after polling the file is unable to send the message to Integration engine and gives a Connection Time out error. it gives the following error.
Transmitting the message to endpoint http://<Host>:<Port>/sap/xi/engine?type=entry using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error transmitting the message over HTTP. Reason: java.net.ConnectException: Connection timed out: connect.
I believe that both the errors are for common cause and possibly the Integration engine is not accepting HTTP request.
Please help.
Thanks and Regards,
Himadri
Edited by: Himadri Chakraborty on Feb 9, 2010 3:35 PM

Time Out Error
In order to get rid of it, Your basis person need to play around with follwing three parameters in order to find an appropriate values as per your hardware sizing and requirement......
icm/conn_timeout
icm/keep_alive_timeout
icm/server_port_< n >
How ever, in general SAP recommandation is as follow....
icm/server_port_0 = PROT=HTTP,PORT=1080,TIMEOUT=30,PROCTIMEOUT=600 to allow a maximum processing time of 10 minutes.
Hope this helps !!!
Regards,
J Augastine

Mail-Adapter Integration Engine Error during parsing of SOAP header

Hello,
we use XI with the mail adapter. Most of the messages are processed correctly. But sometimes I get following errors in the J2EE-logviewer:
Transmitting the message to endpoint http://<xi-host>:<http-port>/sap/xi/engine
?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.a
pi.RecoverableException: Received HTTP response code 500 : Error during
parsing of SOAP header.
Failed to transmit message 4e913640-4cc5-11dc-8560-00e000c55366(OUTBOUND)
due to com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP
response code 500 : Error during parsing of SOAP header.
Retries exceded, set message
4e913640-4cc5-11dc-8560-00e000c55366(OUTBOUND) to status NON_DELIVERED.
Has somebody else the same problem and solved it or any idea what the matter could be?
Thanks for your help
Christian

Hi Reddy,
We´ve got the following scenario:
Exchange-Server (is always up)
XI Mail-ReceiverAdapter
I use IMAP4 to access the Outlook-Email-Box
Everything works fine. But some Emails aren´t processed.
I think it´s a problem between adapterframework and the integration engine?
There is no difference between the emails?
If you´ll need further informations ask me?
Thanks

How to retrive the old messages in sxmb_moni (integration engine)

Hi Expert,
We were trying to call RFC and send some messages through XI. Due to some connection issue the message was failed in integration engine(MONI). As this messages had failed last week. We are not able to see the messages in MONI.
Now we wanted to get the payload of the messages which had failed.
Can you please suggest how can we see those messages and get the payload which is now not visible in MONI.
Thanks in advance.
Thanks,
Nutan Champia.

Hi All,
Thanks for your response. I am able to see some messages in the mentioned table but I am not able to open those messages in MONI with the message id given in the table SXMSPMAST2 (SXMSPMAST) and SXMSPHIST to get the payload. (I have given date selection critaria as 1st of Nov 2011 till date). As this is very important for us would you please help us.
Hi Venkata Ramesh,
So if I have correctly understood you, then you mean to say that these messages which is not visible in moni we can not retrive the payload.
Would you please help me to understand where can we see the settings to mention the number of days for which these messages should appear in MONI. (So that we can increase or can see the current settings for our project)
Thanks
Nutan

Performance of XI Integration Engine

Hi,
Scenario: RFC <=> PI <=> HTTP
In our landscape, we have more number of RFC to HTTP interfaces(syn). I need to know about the effect in the performance of PI Integration Engine as messages per sec will be large. Specifically, how RFC Adapter will perform under high load conditons.
Regards,
Manikandan R

Kindly have the a look at the following links....This will tell you the process to enable High volume of data transfer efficiently
/people/william.li/blog/2008/03/07/step-by-step-guide-in-processing-high-volume-messages-using-pi-71s-message-packaging
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/9056c89c-1a2e-2a10-8a99-eae154e74c4e
http://help.sap.com/saphelp_nw04s/helpdata/en/42/e7bb8f7c9d3ee0e10000000a1553f6/frameset.htm
This will Help you out..................................
BR,
Sainath

Error In Runtime Workbench (Integration Engine)

Hi All,
I have an issue with the PI Netweaver 7.0 SR3.We change the client from 001 to newclient by following SAP NOTE.
Everything is happening fine except while i use Transaction SXMB_IFR and then Run Time Work Bench in component monitoring Integration Engine is not in Healthy State,Its showing Yellow Signal and a message is like this
Is Web service security available?
Description :Communication error Proxy calls are not permitted on sender or receiver side on the IS (client)
Also Business Process Engine is also Showing Yellow Signal as
Schedule Background Job for Missed Deadlines
    Schedule Background Job for Work Items with Errors
    Schedule Background Job for Event Queue
    Schedule background job for clearing report
    Schedule Background Job for Shared-Memory Update of Container Fa
    Schedule Background Job for Deadline Monitoring
So please suggest how to proceed to fix these issues.
Thanks,
Gagan Deep Kaushal

Hi,
for WS security please have a look at this page (last question)
http://help.sap.com/saphelp_NW04/helpdata/en/a5/1b5342d8a7be30e10000000a155106/content.htm
you can also try my answer from:
Re: RWB Integration Engine status yellow
BTW
this cal stay yellow and it does not mean that XI/PI will not work
Regards,
Michal Krawczyk
Edited by: Michal Krawczyk on Nov 29, 2008 1:11 PM

Generated Proxy Error: System not configured as XI Integration Engine

Dear all,
Using transaction SPROXY I generated a proxy on a Message Interface.
This generated as well a method and the associated class.
When I run it, trying to send data through all this, I get the following error:
System not configured as XI Integration Engine
Here is the model I got on another thread, in order to catch the error text:
DATA: l_sys_exception TYPE REF TO cx_ai_system_fault.
*...proxy call
catch CATCH CX_AI_SYSTEM_FAULT into l_sys_exception.
write: l_sys_exception->errortext.
Anyone has any idea where this error commes from?
I am mostly wondering whether the problem comes from my outbound system or XI configuration?
Thanks a lot, have a nice day!
Isa.

check this thread
https://forums.sdn.sap.com/click.jspa?searchID=2727912&messageID=1877263

System not configured as Integration Engine

Hi Friends ,
I have written an outbound client proxy for my interface . I am using XI to File Adapter scenerio .
When I run the zprogram in R3 then I get the error
System not configured as Integration Engine ...
Please suggest .
Best Regards
Chan

Hi Chane,
Go to SXMB_ADM->Configuration->Integration Engine COnfiguration->Choose your R/3 system as Application System
Refer this Configuration Guide - Page no 27
https://websmp102.sap-ag.de/~sapidb/011000358700001697502004E.PDF
Regards,
Moorthy

Error: System not configured as Integration Engine

Hi ,
I was trying to simulate the following scenario in SAP XI:
HTTP--> SAP XI --> (RFC/BAPI)SAP R/3
Let me clear what i did.
I have to call a BAPI using RFC adapter in XI to display some information on a request of some Http app.
1. I have Imported the RFC BAPI into IR.
2. I have created the XSD files for http Re and res messages.
3. I have created the XSLT mapping programs and put them in a zip file and imported into IR.
4. I have created a Interface mapping and assign the created messages and mapping programs.
5. In ID i have created a Business service for my web application.
6. Receiver determination created in Id and Interface determination and receiver agreement in ID and activated the changes.
7. I have tested the same by sending the request from my web application to xi plain http adapter as follows:
http://grserver:8000/sap/xi/adapter_plain?bs=XIWS_web&namespace=urn%3Axi%3Asap%3Awebapp&interface=HTTP_out&qos=BE
and in the result i have got the following error:
"System not configured as Integration Engine"
but i have tried it many times and some times it gives me correct results but after that the same error ios coming.
so can you tell me what could be wrong in the configuration of XI of what is the solution for this problem.
Reagrds
Gopesh Kumar Agarwal

Hi,
What is the version of XI you are using? If u are usign XI2.0, ur URL is correct. But if you are using XI3.0 then use service=<SENDERSERVICE>instead of
bs=<SENDERSERVICE> parameter in your URL.
bs is replaced by service in XI3.0
Your URL will be http://grserver:8000/sap/xi/adapter_plain?service=XIWS_web&namespace=urn%3Axi%3Asap%3Awebapp&interface=HTTP_out&qos=BE
Hope this helps you.
Cheers,
Siva Maranani.
Message was edited by: siva maranani
Message was edited by: siva maranani

Bypassing integration engine in pi 7.0

Similar Messages

Maybe you are looking for