C: drive won't start loading windows

Building a new system - I have a KT4V mainboard in aqn Antec case with a 2000+ CPU, GeForce 4 video card and a single floppy, CD-Rom, and 40 Gbyte drive.  Very easy install, zipped thru BIOS process with no problem, system correctly recognizes the components.  But when it boots now it gets to the point where all for D-Bracket lights are green, and just sits there with a blinking cursor in the upper left corner - won't start loading windows.  I put the disk in another system - loaded fine -it's ready to go.  Tried putting Windows XP startup disk in the cd.  It recognizes that windows is already installed on the C: drive.  I have tried repair and reinstall - after a few minutes the process hangs - I think when it tries to write to the disk for the first time.
I think I've tried everything.  Other than figuring out that I have to reverse the HDD Led connector, no progress.  :(

I bett the problem lies with the XP motherboard drivers loaded on the hard drive, it will not see the new board.
I would try to reboot on the old machine, load the new MB drivers into a folder on the desktop or wherever, then try to do a right click my computer>properties>hardware>device manager> + IDE ATA/ATIPI controler, uninstall both the primary and secondary channels. It will ask you to restart in between each one but don`t restart until done. Then instead of restarting that machine just shut down and swap the HD into the new system, hopefully it will see the IDE channel and when asked for drivers, direct it to the folder on the desktop or wherever you put them.
I just tryed to unistall both IDE channels on this machine and it reinstalled the drivers after reboot and then rebooted again so if it don`t work you should be able to put it back in the first machine.
Other then that, I think a fresh HD or one that has or needs a reformat installed on the new machine then add this one with the other programs you have as a slave to the first is going to be about the only way I know of.

Similar Messages

  • Acrobat X Pro (10 and lower) won't start on Windows 7 (64-bit)

    Hello, does anyone know why Acrobat X Pro (10 and lower) won't start on Windows 7 (64-bit)? It just doesn't respond whether I try to open files with it or double-click to start the program. Re-installation and Repair doesn't help. I had the same issue with the previous versions of Acrobat on this computer. 
    Thank you!

    Ditto to all of the above. Acrobat Pro was working fine until a day or two ago, then kaput.  Reader still functions.  I have Win 7 (64bit), CS6 Design and Web Premium. Anyone with any new ideas? 
    I don't seem to have an alm.log file, but I do have the amt3.log, see below.
    amt3.log
    2012-06-12 07:54:34 [5740]  AMT: START SESSION, library version 3.5.0.34,3.5
    2012-06-12 07:54:34 [5740]  AMT: Initializing C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\
    2012-06-12 07:54:34 [5740]  AMT: Adobe License Manager version 3.5 (build 2.0) RELEASE
    2012-06-12 07:54:34 [5740]  AMT: Virtualization Turned off
    2012-06-12 07:54:34 [5740]  ServiceLoader: looking for library C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\adobe_caps.dll
    2012-06-12 07:54:34 [5740]  ServiceLoader: Found library C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\adobe_caps.dll
    2012-06-12 07:54:34 [5740]  PCDService: PCD Service in threaded mode
    2012-06-12 07:54:34 [5740]  performance: AMTPreObtainProductLicense took 4.550707 ms
    2012-06-12 07:54:34 [5740]  PCD thread: PCD thread started
    2012-06-12 07:54:34 [5740]  ServiceLoader: looking for library C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\Adobe_OOBE_Launcher.dll
    2012-06-12 07:54:34 [5740]  ServiceLoader: Found library C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\Adobe_OOBE_Launcher.dll
    2012-06-12 07:54:34 [5740]  AMT: App Product Locale [0] = en_US
    2012-06-12 07:54:34 [5740]  config: Loading configuration for C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\AMT\application.xml
    2012-06-12 07:54:34 [5740]  config: Found payload code {AC76BA86-1033-F400-7760-000000000005}
    2012-06-12 07:54:34 [5740]  PCDService: found driver code {402F6F2E-5683-491C-977D-0CA599A07CAF}
    2012-06-12 07:54:34 [5740]  config: config: Host app was installed, using installed license configuration.
    2012-06-12 07:54:34 [5740]  PCDService: No value for key [FLMap] in hive [AcrobatPro-AS1-Win-GM{|}ALL] in cache.
    2012-06-12 07:54:34 [5740]  config: Setting current license to the driver at startup because no mapping was found.
    2012-06-12 07:54:34 [5740]  config: Setting current license to DesignWebSuitePremium-CS6-Win-GM [ALL]
    2012-06-12 07:54:34 [5740]  config: payload code: {AC76BA86-1033-F400-7760-000000000005}
    2012-06-12 07:54:34 [5740]  config: driver payload code: {402F6F2E-5683-491C-977D-0CA599A07CAF}
    2012-06-12 07:54:34 [5740]  config: driver licensing code: DesignWebSuitePremium-CS6-Win-GM
    2012-06-12 07:54:34 [5740]  config: current licensing code: DesignWebSuitePremium-CS6-Win-GM
    2012-06-12 07:54:34 [5740]  config: current locale code: ALL
    2012-06-12 07:54:34 [5740]  config: Done loading configuration
    2012-06-12 07:54:34 [5740]  AMT: Locale from PCD [0] = en_US
    2012-06-12 07:54:34 [5740]  AMT: Reordered Installed App Product Locale [0] = en_US
    2012-06-12 07:54:34 [5740]  config: Setting insalled locales
    2012-06-12 07:54:34 [5740]  config: Changing locale to "en_US" because old locale "" is not in the new list of installed languages
    2012-06-12 07:54:34 [5740]  ServiceLoader: looking for library C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\asneu.dll
    2012-06-12 07:54:34 [5740]  ServiceLoader: Found library C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\asneu.dll
    2012-06-12 07:54:34 [5740]  AMT: config: Finding license info for payload: {402F6F2E-5683-491C-977D-0CA599A07CAF}
    2012-06-12 07:54:34 [5740]  AMT: config: PayloadCode: {AC76BA86-1033-F400-7760-000000000005}
    2012-06-12 07:54:34 [5740]  AMT: config: Driver PayloadCode: {402F6F2E-5683-491C-977D-0CA599A07CAF}
    2012-06-12 07:54:34 [5740]  AMT: config: Installed LicensingCode: DesignWebSuitePremium-CS6-Win-GM
    2012-06-12 07:54:34 [5740]  PCDService: No value for key [AdobeUpdaterCodeV2] in hive [{AC76BA86-1033-F400-7760-000000000005}] in master.
    2012-06-12 07:54:34 [5740]  PCDService: No value for key [BridgeTalkCode] in hive [{AC76BA86-1033-F400-7760-000000000005}] in master.
    2012-06-12 07:54:34 [5740]  PCDService: No value for key [AdobeUpdaterCodeV2] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in master.
    2012-06-12 07:54:34 [5740]  PCDService: No value for key [BridgeTalkCode] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in master.
    2012-06-12 07:54:34 [5740]  PCDService: No value for key [ISO_TAGGING_DISABLED] in hive [AcrobatPro-AS1-Win-GM] in master.
    2012-06-12 07:54:34 [5740]  PCDService: No value for key [EULA] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in master.
    2012-06-12 07:54:34 [5740]  PCDService: No value for key [Registration] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in master.
    2012-06-12 07:54:34 [5740]  PCDService: No value for key [Registration] in hive [{AC76BA86-1033-F400-7760-000000000005}] in master.
    2012-06-12 07:54:34 [5740]  PCDService: No value for key [Growl] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in master.
    2012-06-12 07:54:34 [5740]  PCDService: No value for key [Growl] in hive [{AC76BA86-1033-F400-7760-000000000005}] in master.
    2012-06-12 07:54:34 [5740]  PCDService: No value for key [Updates] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in master.
    2012-06-12 07:54:34 [5740]  PCDService: No value for key [Updates] in hive [{AC76BA86-1033-F400-7760-000000000005}] in master.
    2012-06-12 07:54:34 [5740]  AMT: config: No BridgeTalkCode found in configuration; Bridgetalk will be disabled.
    2012-06-12 07:54:34 [5740]  PCDService: No value for key [SuiteFeatureCount] in hive [DesignWebSuitePremium-CS6-Win-GM] in master.
    2012-06-12 07:54:34 [5740]  AMT: Application can be serialized (sif file found).
    2012-06-12 07:54:34 [5740]  PCDService: No value for key [SN] in hive [AcrobatPro-AS1-Win-GM{|}en_US] in cache.
    2012-06-12 07:54:34 [5740]  config: No en_US licensed serial number found in AcrobatPro-AS1-Win-GM
    2012-06-12 07:54:34 [5740]  PCDService: No value for key [SN] in hive [DesignWebSuitePremium-CS6-Win-GM{|}ALL] in cache.
    2012-06-12 07:54:34 [5740]  config: No ALL licensed serial number found in DesignWebSuitePremium-CS6-Win-GM
    2012-06-12 07:54:34 [5740]  PCDService: No value for key [AMTConfigPath] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in cache.
    2012-06-12 07:54:34 [5740]  PCDService: No value for key [LineCV 6] in hive [DesignWebSuitePremium-CS6-Win-GM{|}ALL] in cache.
    2012-06-12 07:54:34 [5740]  PCDService: No value for key [LineCV 7] in hive [DesignWebSuitePremium-CS6-Win-GM{|}ALL] in cache.
    2012-06-12 07:54:34 [5740]  AMT: First launch (serial [90148700767331006075]).
    2012-06-12 07:54:34 [5740]  AMT: Application state initialized.  Obtaining Product License.
    2012-06-12 07:54:34 [5740]  AMT: Obtaining client features from cache.
    2012-06-12 07:54:34 [5740]  AMT: Obtaining client product info from cache.
    2012-06-12 07:54:34 [5740]  AMT: Forcing first launch workflow because product is not licensed from previous launch.
    2012-06-12 07:54:34 [5740]  AMT: AMT: Obtaining Product License.
    2012-06-12 07:54:34 [5740]  AMT: Launch Workflow not yet done in foreground in this session.
    2012-06-12 07:54:34 [5740]  AMT: Starting First Launch Workflow
    2012-06-12 07:54:34 [5740]  AMT: Running in PROV_APP
    2012-06-12 07:54:34 [5740]  PCDService: No value for key [EULADelay] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in master.
    2012-06-12 07:54:34 [5740]  PCDService: No value for key [EULADelay] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in master.
    2012-06-12 07:54:34 [5740]  PCDService: No value for key [MediaTag] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in master.
    2012-06-12 07:54:34 [5740]  config: No media tag found for payload {402F6F2E-5683-491C-977D-0CA599A07CAF}
    2012-06-12 07:54:34 [5740]  config: Using default media policy RET
    2012-06-12 07:54:34 [5740]  uiswitch: EULA has already been accepted.
    2012-06-12 07:54:34 [5740]  AMT: Starting ALM workflow.
    2012-06-12 07:54:34 [5740]  AMT: Initializing ALM for serialized activation.
    2012-06-12 07:54:34 [5740]  ALMService: Initializing as licensed app
    2012-06-12 07:54:34 [5740]  ALM: _info_: Start ALM 3.5 Release (build 3.5.2.0)
    2012-06-12 07:54:34 [5740]  SLCoreService: Starting up SLCore 1.5 Release (build 1.5.21.224873).
    2012-06-12 07:54:34 [5740]  SLCoreService: Service construction took 0.0 ms and succeed.
    2012-06-12 07:54:34 [5740]  ALM: _info_: LEID passed DesignWebSuitePremium-CS6-Win-GM is used to configure SLCore = 0
    2012-06-12 07:54:34 [5740]  ALM: _info_: Host app is Licensable App
    2012-06-12 07:54:34 [5740]  PCDService: No value for key [AcrobatPro-AS1-Win-GM{|}16] in hive [SSC-AS1-LE-Dominance] in master.
    2012-06-12 07:54:34 [5740]  config: SSC LEID dir not found: C:\Program Files (x86)\Common Files\Adobe\ssc\TechnicalCommunicationSuite-TS3.5-Win-GM
    2012-06-12 07:54:34 [5740]  config: SSC LEID dir not found: C:\Program Files (x86)\Common Files\Adobe\ssc\TechnicalCommunicationSuite-TS3.5-Win-GM
    2012-06-12 07:54:34 [5740]  ALM: _info_: Found LEID AcrobatPro-AS1-Win-GM with AMT Path C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\AMT
    2012-06-12 07:54:34 [5740]  ALM: _info_: Found LEID AcrobatSuite-AS1-Win-GM with AMT Path C:\Program Files (x86)\Common Files\Adobe\ssc\AcrobatSuite-AS1-Win-GM
    2012-06-12 07:54:34 [5740]  ALM: _info_: Found LEID FrameMakerServer-TS3-Win-GM with AMT Path C:\Program Files (x86)\Common Files\Adobe\ssc\FrameMakerServer-TS3-Win-GM
    2012-06-12 07:54:34 [5740]  ALM: _info_: Found LEID TechnicalCommunicationSuite-TS3-Win-GM with AMT Path C:\Program Files (x86)\Common Files\Adobe\ssc\TechnicalCommunicationSuite-TS3-Win-GM
    2012-06-12 07:54:34 [5740]  ALM: _info_: Found LEID DesignSuiteStandard-CS5.5-Win-GM with AMT Path C:\Program Files (x86)\Common Files\Adobe\ssc\DesignSuiteStandard-CS5.5-Win-GM
    2012-06-12 07:54:34 [5740]  ALM: _info_: Found LEID WebSuitePremium-CS5.5-Win-GM with AMT Path C:\Program Files (x86)\Common Files\Adobe\ssc\WebSuitePremium-CS5.5-Win-GM
    2012-06-12 07:54:34 [5740]  ALM: _info_: Found LEID DesignSuitePremium-CS5.5-Win-GM with AMT Path C:\Program Files (x86)\Common Files\Adobe\ssc\DesignSuitePremium-CS5.5-Win-GM
    2012-06-12 07:54:34 [5740]  ALM: _info_: Found LEID MasterCollection-CS5.5-Win-GM with AMT Path C:\Program Files (x86)\Common Files\Adobe\ssc\MasterCollection-CS5.5-Win-GM
    2012-06-12 07:54:34 [5740]  ALM: _info_: Found LEID ELearningSuite-ES2.5-Win-GM with AMT Path C:\Program Files (x86)\Common Files\Adobe\ssc\ELearningSuite-ES2.5-Win-GM
    2012-06-12 07:54:34 [5740]  ALM: _info_: Found LEID TechnicalCommunicationSuite-TS3.5-Win-GM with AMT Path
    2012-06-12 07:54:34 [5740]  ALM: _info_: Found LEID V6{}TechnicalCommunicationSuite-TS4-Win-PR with AMT Path C:\Program Files (x86)\Common Files\Adobe\ssc\V6{}TechnicalCommunicationSuite-TS4-Win-PR
    2012-06-12 07:54:34 [5740]  ALM: _info_: Found LEID V6{}FrameMakerServer-TS4-Win-PR with AMT Path C:\Program Files (x86)\Common Files\Adobe\ssc\V6{}FrameMakerServer-TS4-Win-PR
    2012-06-12 07:54:34 [5740]  ALM: _info_: Found LEID DesignWebSuitePremium-CS6-Win-PR with AMT Path C:\Program Files (x86)\Common Files\Adobe\ssc\DesignWebSuitePremium-CS6-Win-PR
    2012-06-12 07:54:34 [5740]  ALM: _info_: Found LEID DesignSuiteStandard-CS6-Win-PR with AMT Path C:\Program Files (x86)\Common Files\Adobe\ssc\DesignSuiteStandard-CS6-Win-PR
    2012-06-12 07:54:34 [5740]  ALM: _info_: Found LEID MasterCollection-CS6-Win-PR with AMT Path C:\Program Files (x86)\Common Files\Adobe\ssc\MasterCollection-CS6-Win-PR
    2012-06-12 07:54:34 [5740]  ALM: _info_: Found LEID V6{}ELearningSuite-ES6-Win-PR with AMT Path C:\Program Files (x86)\Common Files\Adobe\ssc\V6{}ELearningSuite-ES6-Win-PR
    2012-06-12 07:54:34 [5740]  ALM: _info_: Found LEID CreativeCloud-CS6-Win-GM with AMT Path C:\Program Files (x86)\Common Files\Adobe\ssc\CreativeCloud-CS6-Win-GM
    2012-06-12 07:54:34 [5740]  ALM: _info_: Found LEID DesignWebSuitePremium-CS6-Win-GM with AMT Path C:\Program Files (x86)\Common Files\Adobe\Adobe Creative Suite 6 Design and Web Premium\AMT
    2012-06-12 07:54:34 [5740]  PCDService: No value for key [MediaTag] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in master.
    2012-06-12 07:54:34 [5740]  config: No media tag found for payload {402F6F2E-5683-491C-977D-0CA599A07CAF}
    2012-06-12 07:54:34 [5740]  config: Using default media policy RET
    2012-06-12 07:54:34 [5740]  ALM: _info_: MediaTagPolicy is RET
    2012-06-12 07:54:34 [5740]  PCDService: No value for key [NTL_WO_SN] in hive [DesignWebSuitePremium-CS6-Win-GM] in master.
    2012-06-12 07:54:34 [5740]  ALM: _info_: Canonical LEID is AcrobatPro-AS1-Win-GM
    2012-06-12 07:54:34 [5740]  ALM: _info_: Driver LEID is DesignWebSuitePremium-CS6-Win-GM
    2012-06-12 07:54:34 [5740]  PCDService: No value for key [901487007673310060752956] in hive [RejectedSNDomain_CS5] in cache.
    2012-06-12 07:54:34 [5740]  SLCoreService: Reading product config [C:\Program Files (x86)\Common Files\Adobe\Adobe Creative Suite 6 Design and Web Premium\AMT\SLConfig.xml]
    2012-06-12 07:54:34 [5740]  ALM: _info_: alm::IsLangPackForLocaleInstalled - Checking if lang pack is installed for ALL
    2012-06-12 07:54:34 [5740]  ALM: _info_: alm::IsLangPackForLocaleInstalled - Lang pack is not installed
    2012-06-12 07:54:34 [5740]  ALM: _time_: (func: ALM_Initialize, duration: 0.016 sec)
    2012-06-12 07:54:34 [5740]  AMT: Performing ALM silent license verification.
    2012-06-12 07:54:34 [5740]  PCDService: No value for key [EncryptedSerial] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in cache.
    2012-06-12 07:54:34 [5740]  PCDService: No value for key [Serial] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in cache.
    2012-06-12 07:54:34 [5740]  config: No pre-serial number found in {402F6F2E-5683-491C-977D-0CA599A07CAF}
    2012-06-12 07:54:34 [5740]  PCDService: No value for key [PSN] in hive [DesignWebSuitePremium-CS6-Win-GM{|}en_US] in cache.
    2012-06-12 07:54:34 [5740]  config: No en_US provisional serial number found in DesignWebSuitePremium-CS6-Win-GM
    2012-06-12 07:54:34 [5740]  PCDService: No value for key [PSN] in hive [DesignWebSuitePremium-CS6-Win-GM{|}ALL] in cache.
    2012-06-12 07:54:34 [5740]  config: No ALL provisional serial number found in DesignWebSuitePremium-CS6-Win-GM
    2012-06-12 07:54:34 [5740]  ALM: _info_: Validate license at Pre-Chrome time
    2012-06-12 07:54:34 [5740]  ALM: _info_: Searching license for locale en_US ...
    2012-06-12 07:54:34 [5740]  PCDService: No value for key [SN] in hive [AcrobatPro-AS1-Win-GM{|}en_US] in cache.
    2012-06-12 07:54:34 [5740]  config: No en_US licensed serial number found in AcrobatPro-AS1-Win-GM
    2012-06-12 07:54:34 [5740]  PCDService: No value for key [970787040936944783527623] in hive [RejectedSNDomain_CS5] in cache.
    2012-06-12 07:54:34 [5740]  SLCoreService: Reading product config [C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\AMT\SLConfig.xml]
    2012-06-12 07:54:34 [5740]  ALM: _info_: alm::IsLangPackForLocaleInstalled - Checking if lang pack is installed for ALL
    2012-06-12 07:54:34 [5740]  ALM: _info_: alm::IsLangPackForLocaleInstalled - Lang pack is not installed
    2012-06-12 07:54:34 [5740]  ALM: _info_: alm::IsLangPackForLocaleInstalled - Checking if lang pack is installed for ALL
    2012-06-12 07:54:34 [5740]  ALM: _info_: alm::IsLangPackForLocaleInstalled - Lang pack is not installed
    2012-06-12 07:54:34 [5740]  ALM: _info_: Found existing serialization under LEID AcrobatPro-AS1-Win-GM, the serial number locale is ALL
    2012-06-12 07:54:34 [5740]  PCDService: No value for key [970787040936944783527623] in hive [RejectedSNDomain_CS5] in cache.
    2012-06-12 07:54:34 [5740]  ALM: _info_: alm::IsLangPackForLocaleInstalled - Checking if lang pack is installed for ALL
    2012-06-12 07:54:34 [5740]  ALM: _info_: alm::IsLangPackForLocaleInstalled - Lang pack is not installed
    2012-06-12 07:54:34 [5740]  PCDService: No value for key [970787040936944783527623] in hive [RejectedSNDomain_CS5] in cache.
    2012-06-12 07:54:34 [5740]  ALM: _info_: alm::IsLangPackForLocaleInstalled - Checking if lang pack is installed for ALL
    2012-06-12 07:54:34 [5740]  ALM: _info_: alm::IsLangPackForLocaleInstalled - Lang pack is not installed
    2012-06-12 07:54:34 [5740]  ALM: _info_: Cached license is expired for locale en_US, continue the search to next locale
    2012-06-12 07:54:34 [5740]  ALM: _info_: No valid license found, fall back to the most preferred locale: en_US
    2012-06-12 07:54:34 [5740]  PCDService: No value for key [SN] in hive [AcrobatPro-AS1-Win-GM{|}en_US] in cache.
    2012-06-12 07:54:34 [5740]  config: No en_US licensed serial number found in AcrobatPro-AS1-Win-GM
    2012-06-12 07:54:34 [5740]  PCDService: No value for key [970787040936944783527623] in hive [RejectedSNDomain_CS5] in cache.
    2012-06-12 07:54:34 [5740]  ALM: _info_: alm::IsLangPackForLocaleInstalled - Checking if lang pack is installed for ALL
    2012-06-12 07:54:34 [5740]  ALM: _info_: alm::IsLangPackForLocaleInstalled - Lang pack is not installed
    2012-06-12 07:54:34 [5740]  ALM: _info_: alm::IsLangPackForLocaleInstalled - Checking if lang pack is installed for ALL
    2012-06-12 07:54:34 [5740]  ALM: _info_: alm::IsLangPackForLocaleInstalled - Lang pack is not installed
    2012-06-12 07:54:34 [5740]  PCDService: No value for key [970787040936944783527623] in hive [RejectedSNDomain_CS5] in cache.
    2012-06-12 07:54:34 [5740]  ALM: _info_: alm::IsLangPackForLocaleInstalled - Checking if lang pack is installed for ALL
    2012-06-12 07:54:34 [5740]  ALM: _info_: alm::IsLangPackForLocaleInstalled - Lang pack is not installed
    2012-06-12 07:54:34 [5740]  SLCoreService: Syncing to license store...
    2012-06-12 07:54:35 [5740]  SLCoreService: Found server mkey.
    2012-06-12 07:54:35 [5740]  SLCoreService: Loading license references...
    2012-06-12 07:54:35 [5740]  SLCoreService: Found 4 license file(s)
    2012-06-12 07:54:35 [5740]  SLCoreService: Parsing license file [20566957.lic] succeed.
    2012-06-12 07:54:35 [5740]  SLCoreService: Parsing license file [226832637.lic] succeed.
    2012-06-12 07:54:35 [5740]  SLCoreService: Parsing license file [28738525.lic] succeed.
    2012-06-12 07:54:35 [5740]  SLCoreService: Parsing license file [7412525.lic] succeed.
    2012-06-12 07:54:35 [5740]  SLCoreService: License store synchronization took 32.2 ms and succeed.
    2012-06-12 07:54:35 [5740]  SLCoreService: Query license: type = 2, duration = 30 days, remaining = expired.
    2012-06-12 07:54:35 [5740]  config: Setting current license to AcrobatPro-AS1-Win-GM [ALL]
    2012-06-12 07:54:35 [5740]  PCDService: No value for key [LoadTrial] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in master.
    2012-06-12 07:54:35 [5740]  PCDService: No value for key [LoadTrial] in hive [{AC76BA86-1033-F400-7760-000000000005}] in master.
    2012-06-12 07:54:35 [5740]  PCDService: No value for key [PDApp_WF] in hive [AcrobatPro-AS1-Win-GM] in cache.
    2012-06-12 07:54:35 [5740]  PCDService: No value for key [ALM_Info_S1] in hive [AcrobatPro-AS1-Win-GM{|}ALL] in cache.
    2012-06-12 07:54:35 [5740]  ALM: _info_: Performing Block Check
    2012-06-12 07:54:35 [5740]  SLCoreService: Query license: type = 2, duration = 30 days, remaining = expired.
    2012-06-12 07:54:35 [5740]  PCDService: No value for key [Subscription] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in master.
    2012-06-12 07:54:35 [5740]  PCDService: No value for key [Subscription] in hive [{AC76BA86-1033-F400-7760-000000000005}] in master.
    2012-06-12 07:54:35 [5740]  PCDService: No value for key [ACT_NOINTERNET] in hive [AcrobatPro-AS1-Win-GM] in cache.
    2012-06-12 07:54:35 [5740]  PCDService: No value for key [SERVICE_ONLINE] in hive [AcrobatPro-AS1-Win-GM] in cache.
    2012-06-12 07:54:35 [5740]  SLCoreService: Query license: type = 2, duration = 30 days, remaining = expired.
    2012-06-12 07:54:35 [5740]  ALM: _time_: (func: ALM_License_SilentValidate, duration: 0.046 sec)
    2012-06-12 07:54:35 [5740]  ALM: _info_: ALM_License_SilentValidate return license status: Invalid
    2012-06-12 07:54:35 [5740]  AMT: License check shows product is unlicensed.
    2012-06-12 07:54:35 [5740]  AMT: Product is not activated.  Starting ALM launch-time product licensing UI.
    2012-06-12 07:54:35 [5740]  SLCoreService: Query license: type = 2, duration = 30 days, remaining = expired.
    2012-06-12 07:54:35 [5740]  PCDService: No value for key [PDApp_WF] in hive [AcrobatPro-AS1-Win-GM] in cache.
    2012-06-12 07:54:35 [5740]  SLCoreService: Query license: type = 2, duration = 30 days, remaining = expired.
    2012-06-12 07:54:35 [5740]  ALM: _info_: Entered ALM_NeedANAG
    2012-06-12 07:54:35 [5740]  SLCoreService: Query license: type = 2, duration = 30 days, remaining = expired.
    2012-06-12 07:54:35 [5740]  PCDService: No value for key [ADOBEID_EXT_PROFILE] in hive [970787040936944783527623] in cache.
    2012-06-12 07:54:35 [5740]  ALM: _info_: Exiting ALM_NeedANAG
    2012-06-12 07:54:35 [5740]  AMT: NAG Ignored!!.
    2012-06-12 07:54:35 [5740]  AMT: Licensing has been refused.  Application must exit.
    2012-06-12 07:54:35 [5740]  AMT: Starting Data Collection for SWTag_Init()
    2012-06-12 07:54:35 [5740]  AMT: DoISOTagging() productCanonicalLEID = AcrobatPro-AS1-Win-GM;outMappedLEID =  AcrobatPro-AS1-Win-GM, unused =
    2012-06-12 07:54:35 [5740]  AMT: DoISOTagging() productPayloadCode = {AC76BA86-1033-F400-7760-000000000005};driverPayloadCode =  {402F6F2E-5683-491C-977D-0CA599A07CAF}
    2012-06-12 07:54:35 [5740]  PCDService: No value for key [EPIC_APP_543] in hive [AcrobatPro-AS1-Win-GM] in master.
    2012-06-12 07:54:35 [5740]  AMT: SWTag_Init() Tags Arguments CS6 Design and Web Premium; AcrobatPro-AS1-Win-GM;
    2012-06-12 07:54:35 [5740]  AMT: DoISOTagging() License Status = unlicensed
    2012-06-12 07:54:35 [5740]  AMT: DoISOTagging() Tags 970787040936944783527623; 10.0; TRIAL
    2012-06-12 07:54:35 [5740]  AMT: DoISOTagging() Product Version 10; 0
    2012-06-12 07:54:35 [5740]  performance: AMTObtainProductLicense took 117.355057 ms
    2012-06-12 07:54:35 [5740]  PCDService: No value for key [AdobeUpdaterCodeV2] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in master.
    2012-06-12 07:54:35 [5740]  PCDService: No value for key [AdobeUpdaterCodeV2] in hive [{AC76BA86-1033-F400-7760-000000000005}] in master.
    2012-06-12 07:54:35 [5740]  PCDService: No value for key [Updates] in hive [{402F6F2E-5683-491C-977D-0CA599A07CAF}] in master.
    2012-06-12 07:54:35 [5740]  PCDService: No value for key [Updates] in hive [{AC76BA86-1033-F400-7760-000000000005}] in master.
    2012-06-12 07:54:35 [5740]  AUMService: config: No AdobeUpdaterCode found in configuration; AUM will be disabled.
    2012-06-12 07:54:35 [5740]  ServiceLoader: looking for library C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\updaternotifications.dll
    2012-06-12 07:54:35 [5740]  ServiceLoader: looking for library C:\Windows\system32\updaternotifications.dll
    2012-06-12 07:54:35 [5740]  ServiceLoader: Failed to find updaternotifications.dll
    2012-06-12 07:54:35 [5740]  ALMService: Terminating
    2012-06-12 07:54:35 [5740]  SLCoreService: Shutting down SLCore 1.5 Release (build 1.5.21.224873).
    2012-06-12 07:54:35 [5740]  SLCoreService: Service destruction took 0.6 ms and succeed.
    2012-06-12 07:54:35 [5740]  ALM: _info_: End ALM
    2012-06-12 07:54:35 [5740]  performance: AMTReleaseProductLicense took 5.815388 ms
    2012-06-12 07:54:35 [5740]  AMT: END SESSION.

  • DVD driver won't start

    The DVD won't work. The device manager shows that the driver won't start. updating driver confirms the latest driver is installed.
    A possibly related problem is an unknown device that can not find a driver.
    I have changed DVD players and the exact same problem occurs, the driver for that device is loaded, but it won't start.

    Have you tried the Microsoft Fix found here at HP?
    Best regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Satellite C55-A-1L0 won't start into Windows 8

    Hey guys.
    I hope you can help me a little.
    I have a Toshiba Satellite C55-A-1L0 here and it won't start into Windows 8.
    I turn it on, the Toshiba welcoming screen appears, then I get a message on a black screen saying "checking media (fail)" and after a little while "no bootable device. Please restart"
    I checked the BiOS and it doesn't seem to see the Hard Disk (says HDD- none) and even in the list of boot order I get a list with the DVD drive with exact name but for HDD not.
    I tried to do a recocery with the F12 button and I get the list to choosw from where I want to boot but selecting harddisk doesn't work.
    So I thought I'd try a linux live distribution to see where my hard disk is and to save my data (after some settings in the BIOS - boot mode CMS) but I cannot find it there too. (I have a mtab and fstab file, would it help if I posted it in here?)
    Is my HDD broken? Can I try something else?
    Thanks a lot!

    This notebook model is pretty new and I presume with valid warranty so I recommend you to contact nearest Toshiba service provider and ask for help.
    Using diagnostic tools they can check if problem is HDD or HDD controller.
    On this virtual way we cannot say for sure what the problem is. In my opinion you should not waste your time because you cannot do much if there is hardware related issue.
    Last step you can try is to set BIOS to default settings and check it again.

  • Satellite A200 - Button support won't start on windows start up

    Hey,
    Today I decided to turn off as many useless program's as I could (to speed up my pc) so I went to Msconfig (I have vista home premium 32 bit), and turned a lot of things off. Including the "toshiba button support". The next time I restarted my extra buttons on the top of the keyboard all worked, beside one. The one that normally turns windows media player on. This time, it did nothing at all. The play/resume, stop, forward, backward and internet button all worked without problem.
    However, I really liked the WMP button, so I tried to find out what the problem was. I found out it was the button support, so I decided to turn it back on.
    However, this did not help :( . I turned it on in msconfig again, but it won't start with windows anymore :(. I know it's the program I need, because when I manually launch the program (it's the program: programfiles/toshiba/TBS/HSON.exe ) the button works.
    I did put a V in front of the program in msconfig, but that did not work. Anyone has an idea why not?
    Edit: I found a solution, although not the best. If anyone ever has the same problem:
    I made a shortcut from the program that had to run (can be found in C:programfiles/toshiba/TBS and is called HSON.exe). Next I clicked on start, and said "all programs", here I selected the folder "opstarten", this is the dutch version, but my guess is it is called something like "start up" in english. In this, I pasted (copy/cut -> paste) the shortcut to the program, and now it starts again :)

    Hi!
    I agree with Akuma. You should try to reinstall the Toshiba Value Added Package. This controls the media buttons, FN buttons and all special functions on the notebook.
    Look on the Toshiba website for an update:
    http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
    Bye

  • Firefox won't start on windows 7. Used to word when it was on version 18. I have different windows 7 machine it works fine on that.

    firefox won't start on windows 7 after upgrading to version 19 or 20. Even if it starts up I cannot do anything on it, its in not responding mode. I have tried uninstalling and installing again with both version 19 and 20. Also i tried deleting the profile and re creating a new profile.

    it does not work even in windows safe mode with networking. same issue. if i wait for some time firefox comes but in not responding mode. then a pop shows up with - script: chrome//browser/content/tabbrowser.xml 2123 .

  • Forefox won't start in windows XP: I get the message that windows "cant' find the exe file" even when I click from the program file, rather than the shortcut.

    Forefox won't start in windows XP: I get the message that windows "cant' find the exe file" even when I click from the program file, rather than the shortcut.

    Delete the current Firefox shortcut on the desktop and create a new desktop shortcut via the right-click context menu on the Firefox.exe program (Send to > Desktop)

  • Satellite A100 - Won't start up Windows

    Without changing anything, my Satellite A100 won't start up Windows.
    A screen with with Windows foutherstel (failure recovery) gives two options; start windows normally and start up recovery. When I push the first option, there is a quick blue screen, what disapears too fast to read the tekst. Finally the screen failure recovery comes back. in the other option there is a screen Options for system recovery who's said; Can not start the installated program. Click on Ok to shut down the computer.
    How do I fix this problem?

    Hi hans_3,
    Maybe something has muddled up the Windows registry or some important system files and so you cant start Windows anymore or start the system repair option.
    I think in this case its necessary to reinstall Windows. Therefore you can take the Toshiba recovery disk that brings your computer back o factor settings where all drivers and tools are already installed but it wipes the whole HDD.
    It takes only few minutes and needs some clicks.
    Good luck! :)

  • CiscoWorks LMS 3.2 Won't Start on Windows Server 2008 Enterprise

    All,
    I installed CiscoWorks LMS 3.2 RME on Windows Server 2008 Enterprise and the daemon manager won't start.  The server is a VMware ESX server 4.0.
    I've uninstalled and reinstalled and still nothing.
    I get message "The service is not responding to the control function"
    Has anyone had this issue?
    Stephanie

    There could be several reasons this happens.  Common one in Windows 2008 is the swap is not set properly as it defaults to "Automatically manage paging file size for all drives".  Try setting the swap to 8GB manually or whichever is the recommendation for your current device count as per:
    http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/install/guide1/prereq.html
    Also make sure the startup services are set this way:
    CiscoWorks ANI database engine: Manual
    CiscoWorks Daemon Manager: Automatic
    CiscoWorks RME NG database engine: Manual
    CiscoWorks Tomcat Servlet Engine: Manual
    CiscoWorks Web Server: Manual
    CWCS Cmf database engine: Manual
    CWCS rsh/rcp service: Automatic
    CWCS syslog service: Automatic
    CWCS tftp service: Automatic
    DFM dfmEpm database engine: Manual
    DFM dfmFh database engine: Manual
    DFM dfmInv database engine: Manual
    Set DEP for "Windows Essential Programs Only" and set an exclusion for CSCOpx in your anti-virus on-access scanning settings.  Note that Windows 2008 R2 versions are not supported.

  • My tx2 hard drive won't start!!! HELP!!!!

    My laptop is a a Tx2z-1000 is 2 1/2 years old. For the last 9 months or so its had this problem when booting up. My laptop will turn on but the hard drive won't turn on with it. O can hear the fans running and the rest of the computer trying to start up but the hard drive light stays dark. My monitor stays dark or sometimes will light up and stay black. My laptop will eventually shut itself down. I would like to know how to fix this problem because I'm pretty sure it's not good for my laptop. Also, I want to note that my laptop also has an overheating problem which could be contributing to this problem, I'm not sure. Any help would be lovely. Thanks!

    Bummer! But when I looked this drive up, it seems like it's a current model, so I'm assuming it's fairly new?
    Unfortunately, I'm not really an expert on external drives, but I'm thinking that if the drive is relatively new, and still spins up, then it should eventually be possible to access it again. Maybe if you could clarify the circumstances of the crash a bit, it will be possible to get this sorted out. I'm not entirely clear on just what happened.
    First, could you describe the crash--what exactly did the drive do? Was a cable bumped or anything like that? Or did something happen just out of the blue? And does the drive still spin up?
    I am assuming that you checked the obvious things like making sure the USB port was working and the cable itself was OK. I gather that Disk Utility can see the drive, but all the options are grayed out so it can't do anything? Is your PC a different computer, not just Windows on your MBP? I gather that the PC can also see the WD drive, but can't mount it? I know nothing of PC's so I don't know any PC troubleshooting.
    One thing that might be worth trying is calling Western Digital and talking to their tech support people. I believe that WD has a 3 year warranty on their drives, and I expect they would be most familiar with the drive and what the problem with it might be. For example, it might be that some component in the enclosure went south and is keeping the drive from mounting. It could be that the failure of some component in the enclosure is what caused the original crash. It might even be worth trying the drive in a different enclosure.
    Good luck!

  • HP Pavilion dv6 1334us won't start after windows update, stuck in Error Recovery

    My computer is an HP Pavilion dv6 1334us with 32bit-windows 7. The computer did automatic updates and when it started up said there was another one avaliable through WIndows Updater. I installed the update and it said the computer needed to restart for the update to take effect. I choose to restart and the computer wouldn't boot back up, it boots to the 'Windows Error Recovery' screen where my options are 'Launch Startup Repair (recommended)' and 'Start Windows Normally'. When I select the repair, it says it loads windows files, then goes back to the error recovery screen. When I choose to start normally, it freezes the second it trys to start, flashes a blue screen and then returns to the Error Recovery page again.

    Please follow the steps in the following document to troubleshoot and fix the boot issue that you are facing.
    Overview of Troubleshooting Startup Problems (Windows 7, Vista, XP): http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01443371&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
    Please let me know the results so that I can try helping you further. Thank you.
    !-------------------Please click the white star in the blue box to give KUDOS if this answer was helpful or clarified your question or issue.
    If my answer solved the issue, then please click on the Accept as solution button. Thank you-----------------------------------------------------------------!
    I am an HP Employee but I am not speaking on behalf of HP. The opinions and views that I express here are my own.

  • Error message Photoshop CS6 won't start in Windows 7

    I am unable to start Photoshop in Windows 7 (64 bit Home Premium). I gegt an error message saying Photoshop CS6 won't start and telling me to close the program. Is this a common problem and is there a solution? I have tried opening the program in safe mode and tried a clean boot all without success.

    Jeremyjk please be aware you are posting in a public forum.  Kglad was kind enough to remove your serial number but please be aware that any information posted is publicly available.
    In addition the screen shots you attempted to post are not visible.  You will need to make sure to choose the option to the View the full discussion within your e-mail notification.  You can find more details on how to post a screen shot at FAQ: How do I capture and post a screen shot or video?.

  • Boot Camp: Mac Pro won't start after Windows install

    After installing Boot Camp on a Mac Pro dual 2.66 (firmware updated), XP installer went through installation & copying files, then restarted. Went to a black screen with white Windows-style text that said something along the lines of "XP cannot start from this CD, press any key to restart." Totally unresponsive, held down power to restart. Will no longer power up. Have reset the SMC without any effect. Makes a brief sound when trying to start, but does not actually start up.
    Is there any known power issue that I might be able to solve myself, or is the supply likely blown?
    Mac Pro   Mac OS X (10.4.8)  

    I put Vista on its own dedicated drive, 64GB Vista, the rest as FAT32 to make it easier to share files. I had to remove the OS X drives in order to allow Windows/Vista to install. Once installed, had a black screen and some blue crash screen, until I ran the BootCamp driver updates.
    I would try unplugging your drive(s) first and see if you boot from Tiger Installer DVD - or better, boot Apple Hardware Test (hold down "d" on startup from Install Disk #1).

  • Agent service won't start on Windows server

    Having bounced the Windows 2003 server (64 bit) the instance and listener started up automatically as set in the "services" but the Agent (which WAS running fine)would not start automatically so I tried to manuall start it in the services...a pop up message states it could not start service and to look in event log for details...
    find this in event log:
    The description for Event ID ( 4 ) in Source ( Oracleagent10gAgent ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: 03/13/08 13:52:14 agent exited with retCode 55..
    find this in the agent.trc:
    2008-03-13 10:49:45 Thread-6956 ERROR vpxoci: Error on dequeue from SYS.ALERT_QUE: ORA-03135: connection lost contact
    2008-03-13 10:49:46 Thread-6956 ERROR vpxoci: Error on dequeue from SYS.ALERT_QUE: ORA-03114: not connected to ORACLE
    2008-03-13 10:49:46 Thread-6956 WARN vpxoci: OCI Error -- ErrorCode(12518): ORA-12518: TNS:listener could not hand off client connection
    SQL = " OCIServerAttach"...
    LOGIN = sys/<PW>@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=cic-svr-app1.Landacorp.local)(PORT=1521))(CONNECT_DATA=(SID=loadtest)))
    2008-03-13 10:49:46 Thread-6956 ERROR vpxoci: ORA-12518: TNS:listener could not hand off client connection
    2008-03-13 10:50:01 Thread-6956 WARN vpxoci: OCI Error -- ErrorCode(12518): ORA-12518: TNS:listener could not hand off client connection
    SQL = " OCIServerAttach"...
    LOGIN = sys/<PW>@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=cic-svr-app1.Landacorp.local)(PORT=1521))(CONNECT_DATA=(SID=loadtest)))
    2008-03-13 10:50:01 Thread-6956 ERROR vpxoci: ORA-12518: TNS:listener could not hand off client connection
    Any ideas? Is there something simple to do or should I try re-install the agent?

    Man, I just love to ask questions then answer them myself:-)
    The reason for all this was the recent change to daylight savings time here!
    The agent (10.2.0.2) will keep running just fine until the server is bounced then it won't start until you apply patch (5884103)...thanks Mike at Metalink!

  • Split screen software of LG ultra wide monitor won't start with windows 7 installed with VMWare Fusion

    I am using split screen sofware of LG but it is not working for me with vmware fusion 7. Is this a known problem? I am using an ultra wide monitor of LG (29um65), and installed windows 7 on my mac, by using VMware Fusion. But the software won't work of LG. It won't start. LG can't help me, because normally the software is working by using windows 7 on a windows pc. I got it also working on a  mac , when I used other virtual software as Virtualbox VM, but it seems not to work with vmware fusion 7. Can somebody help me with this problem?

    yes, I think you are right, but I used virtual box in the past, and had no problem with the LG software, so it has also to do wit VMWare Fusion I think.
    Never the less we still don't have a solution :-)

Maybe you are looking for