C:import and f:verbatim leads to invalid jspx?

When I c:import a JSP page that contains
<f:subview id="included">
<h:form>
    <table>
      <tr>
        <td>A button label</td>
        <td><h:commandButton value="Press Me"/></td>
      </tr>
    </table>
</h:form>
</f:subview>it produces wrong HTML, the button is above the table and the <td> that should contain the button is empty. The spec says I have to escape with f:verbatim, so my page now looks like:
<f:subview id="included">
<h:form>
    <f:verbatim>
      <table>
     <tr>
       <td>A button label</td>
          <td>
    </f:verbatim>
    <h:commandButton value="Press Me"/>
    <f:verbatim>
          </td>
        </tr>
      </table>
    </f:verbatim>
</h:form>
</f:subview>This produces the desired HTML but is ugly and invalid XML - so I can not use XML syntax of JSP (JSPX). Is there a better way to use subviews?
Thanks,
Andreas

If you really want to embed all that HTML, you can do the following to make it valid XML:
<f:subview id="included">
<h:form>
    <f:verbatim>
      <![CDATA[
      <table>
      <tr>
      <td>A button label</td>
      <td>
      ]]>
    </f:verbatim>
    <h:commandButton value="Press Me"/>
    <f:verbatim>
      <![CDATA[
      </td>
      </tr>
      </table>
      ]]>
    </f:verbatim>
</h:form>
</f:subview>

Similar Messages

HT201302 Even though there are over 200 photos on my ipad, after trying both methods of importing and connecting with a lead, a message appears saying that there are no photos on this device. Any ideas?

Even though there are over 200 photos on my ipad, after trying both methods of importing and connecting with a lead, a message appears saying that there are no photos on this device. Any ideas?

Did you connect your iPad to your computer then open the application on your computer that transfers photos from a camera? Your computer should recognize the iPad as a camera. All photos in the Camera Roll on the iPad should then be seen and you should be able to copy them to the computer using that application.
Photos that were synced to your iPad by connecting to your syncing computer cannot be copied back this way as the master file for those photos are on the syncing computer.

I'm trying to open a word file on my iMac and it keeps saying Import error: the file format is invalid. Why?

I exported a file on my imac as a word document but now I can't open it. It says Import error: The file format is invalid.

If no on this forum can help you then I would recommend reposting on the Office for Mac Product Forums.

Xsl:import and xsl:call-template errors for xslt in mediator (ORAMED-03601)

Hello,
I decided for performance issues with bpel execution to use a mediator instead.
In my requester i have a mediator that justs recieves an xml message, uses an xsl transformation (version 2) on that message and then sends it to the EBS.
The xsl file that's works correctly when used in a bpel process has both <xsl:import..../>and <xsl:call_template.../> tags.
When i tried and used the same xsl in the mediator i get an ORAMED-03601 error:
ORAMED-03601:[Invalid transformer configuration]Unable to create transformer. It could be because of transformation file or configuration issues. Reason : "xsl/Xform_PriceListListABMReqMsg_to_PriceListEBMReqMsg.xsl"Possible Fix:Check log file for any exceptions and contact Oracle Support Services for further help
It works correctly again if i comment/remove all the imports and call-template and incorporate them in the xsl file itself.
Do anyone know if there are some limitations using xsl in a mediator instead of a bpel?

Hi,
I have a problem with call-template. I have passed
sed some parameter with call-template tag and used
that parameter in the conditional check tag <xsl:if>
i am getting the error. Can any body tell how to use
this? I actuall want to dynamically pass the tag name
as the parameter and check the attribute value of the
tag passed in the if condition and then i want to
person some action. How can i do it?
Here is the call-template code:
<xsl:call-template name="selected-unselected">
<xsl:with-param
ram name="currentTag">motor-carrier</xsl:with-param>
</xsl:call-template>
Here is the template definition:
<xsl:template name="selected-unselected">
<xsl:param
m name="currentTag">Quick-Quote</xsl:param>
     <xsl:if test="./{$currentTag}/@selected='true'">
          <xsl:text>checked</xsl:text>
     </xsl:if>
     <xsl:if test="./{$currentTag}/@selected='false'">
          <xsl:text>Unchecked</xsl:text>
     </xsl:if>
</xsl:template>
Here is the sample xml code:
<motor-carrier selected="true"/>
<motor-truck selected="false"/>
<sched-mobile-equip selected="false"/>
Here instead of writing the condition check for every
tag i want to write it once and dynamically pass the
tag name as parameter to the template. If the
attribute of the tag has value true then one message
should be displayed otherwise a different message
should be displayed.try this:
<xsl:template name="selected-unselected">
     <xsl:paramm name="currentTag">Quick-Quote</xsl:param>
     <xsl:if test="./*[name()=$currentTag]/@selected='true'">
          <xsl:text>checked</xsl:text>
     </xsl:if>
     <xsl:if test="./*[name()=$currentTag]/@selected='false'">
          <xsl:text>Unchecked</xsl:text>
     </xsl:if>
</xsl:template>

Validating CSV File BEFORE importing and moving using an SSIS package

I'm trying to come up with a process (I'm used to doing this kind of stuff in T-SQL) in SSIS to grab a collection of .csv files from a folder, validate them, then depending on if they pass validation, import them into my database and move them into an archive
folder. If the .csv does not pass validation, then it does not get imported, and instead gets placed into an error folder. The validation requirements is that the Column2 of my .csv contains a WKT text field and the file is considered valid if every record
can be successfully converted into a Geometry/Geography type field.
Column0 Column1 Column2
abcd efgh LINESTRING (-71.4555487 41.6079686, -71.4550113 41.6088851)
ijkl mnop LINESTRING (-70.0748669 48.6634506, -70.0499 48.6548479)
qrst uvwx LINESTRING (-70.3159285 48.4199802, -70.3168512 48.4187551)

FOr that what you can do is dump the records to staging table and use STisValid function
see
http://technet.microsoft.com/en-us/library/bb933890.aspx
finally take the count of failed ones and if cnt > 0 set boolean value as true/false. Then for true cases move data to final table and for false cases (invalid values), move it to error folder
So package will look like below
1. Data flow task to transfer data to staging
2. execute sql task to call a procedure which does validation on staging data and returns a bit result. Set it to SSIS variable using output variable from procedure
3. Connect to data flow task to do transfer from staging to destination. the precedence constraint option would be Expression And Constraint with expression as
@BooleanVariable == True
and constraint as OnSuccess
4. Connect to file system task to archive the file. the precedence constraint option would be Expression And Constraint with expression as
@BooleanVariable == False
and constraint as OnSuccess
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Import to different user - triggers/functions invalid

Hi,
I´m using Oracle 9.2 in both servers.
In my production server, I export the schema CARS.
In my dev server I have two schemas: CARS and CARS_DEV. I can import the dump file to CARS_DEV using TO/FROM. The command that I'm using is:
imp file=carsFeb2008.dmp log=carsFeb2008.log userid=system/blablabla fromuser=CARS touser=CARS_DEV grants=y constraints=y indexes=y statistics=RECALCULATEBut the triggers and functions became invalid, because in the source code there's a line, for example, SELECT * FROM CARS.MYTABLE. The import isn't changing the lines inside the triggers and functions to CARS_DEV.
Pls, any ideas?
Many xks in advance,
Miguel

Other than the (hopefully obvious) option of changing the source code so that you're not explicitly referencing a particular schema name? Import and export aren't going to change the source code itself, so code that explicitly refers to objects in a particular schema cannot be migrated to a different schema without changing the code.
Justin

Import and/or export for actionscript without extention?

I have a project in which I need to import several hundered png images.
When I import them into the library, then select all the images, then view the properties, I Check the export for action script and the export in frame 1.
Now, all my images have class names that I can access though my code, however, it included the file extensions in the class names, thus making invalid class names.
Is there any way I can import and/or set class names so they do not include the file extensions without having to do it manually for EVERY file?

My actual project has something like 9200 images in it.
if my main project, let's call it "main.fla", was to contain every one of those images, every time I tried to run or debug it, it would take FOREVER to compile... as a work around that I discovered in a previous project was to put all my graphics and media into an swc file. (Let's call it MyLibrary.swc)
While I was trying to get the swc working, I discovered that while my media in the swc was indeed setup to be exported for actionscript with unquie classes and everything, when I compiled and built my project, I could not get any of those media elements using the getDefinitionByName function.
After alot of reading and trail and error I found that the only way to get it to work was to have someplace in my code, an actual reference to the objects that I was trying to get with getDefinitionByName. It turned out, that without instantiating the object in the code, the compiler was omitting it.
Now, but instantiate, I mean doing this:
var bm:BitmapData = new MyImage();
Where MyImage.png is in my swc and has a class defined as "MyImage"
Once I do that, then I can do this
var classRef:Class = Class( getDefinitionByName("MyImage") );
But without that line above SOMEWHERE in my code (even if it's not actually executed), the getDefinitionByName returns an error saying it can't find the class.
Now, here's the problem.
When I import all my images into my swc library they get named with the file extention... "MyImage.png" and when I select all the images that Imported and batch set the export for actionscript, they get automatically assigned a class name equal to their library name, so the class name is "MyImage.png"
so if I wanted to use getDefinitionByName to access the class, I would need to instantiate it in my code by doing this:
var bm:BitmapData = new MyImage.png();
BUT, that is erronous as the period causes an error and the adobe docs says right in it that class names can't use periods or any other non-alphanumeric character.
So while the getDefinitionByName function DOES actually work with classes with periods in them, because my media is external of the main.fla, I can't load it unless it's instantiated first, which leaves me right back where I was.... having to to manually rename over 9000 classes manually one at a time.
I did some searching and found the "Flash Library Renamer" extension, but it requires me changing all my class names to be sequenial, which the vast majority is not.
Is there a way that I can import the files into the library and have it omit the file extension?
if not, is there a way that I can set the class names in a batch and not have it use the file extentions?
if not, is there an Flash Extention or plug in that will allow batch renaming using regular expression or wildcards?

BPS: Rescheduling lead to invalid values

Dear Experts:
I've created an exit function that fills a variable that calculates the year (0fiscyear) according to a date in a Z table. The function works well. The problem is when I use it in a couple of layouts. The first layout shows annual values, the second layout opens dinamically from month 1 to 12. Both layouts uses the variable, and both are in the same folder.
When I select any of the layouts, there's no problem, BUT when I´ve opened the second layout and then try to open the first layout, it gives me an error message: "Rescheduling lead to invalid values" and no other infomation. The number of the error message is UPC230.
Does anyone have a solution? Please, help me.
Thanks in advance.
Pablo.

I've created another exit function and it solved this problem.
Thanks!

I'm using CS4 design standard and my serial no. is invalid when I've changed computer. I have deactivated the suite on my previous pc.

I'm using CS4 design standard and my serial no. is invalid when I've changed computer. I have deactivated the suite on my previous pc. Please advice.

Please refer to :
Invalid serial number error
Error "Invalid serial number" | Acrobat 9 | CS4
Please check the internet security status, also check the administrative rights.Most importantly check the compatibility of CS4 with the computer.System requirements | CS4, Point Products
Hope it would help you.
Regards
Rajshree

When I attempt to log on to I tunes I get the following message "The registry settings used by the I tunes drivers for importing and burning CDs and DVDs are missing This can happen as a result of installing other CD burning software Please reinstall

When I attempt to log on to I tunes I get the following message:
"The registry settings used by the I Tunes drivers for importing and burning CDs and DVDs are missing.
This can happen as a result of installing other CD burning software. Please re-install I Tunes."
To my knowledge no new software has been installed. I have tried un-installing and re-installing I Tunes but I still
get the same message.
Can anyone offer any suggestions? Do I need to download a new driver?
Bill Martin

I can get down as far as step 11 but it shows nothing about upper filters and when I type on "If the Upper Filters entry is missing follow these instructions" nothing happens
Do you mean you can't see the instructions on what to do if there is no UpperFilters entry?
If so, here's the relevant instructions for that step:
On the right side of the Registry Editor window, right-click the UpperFilters entry and choose Modify from the shortcut menu.
Right-click the empty white space within the right-hand portion of the Registry Editor window. From the shortcut menu, choose New > Multi-String Value.
Name this new value "UpperFilters" (without the quotes). Then, right-click the newly created UpperFilters entry and choose Modify from the shortcut menu.

What is the difference between import and merge?

When setting up my wife's new account on my son's MBP, I did not migrate all of her photos as they were in 2 or 3 separate iPhoto Libraries. I researched this forum and found the best way to merge all of her libraries is to buy iPLM. According to a post by Terence Devlin, if I don't use iPLM, thumbnails, previous editing, keywords, etc., will not be imported. OK, but if we only want the originals photos and there was no editing or ratings or keywords, can't we just use the "Import" feature?
According to Apple's instructions, the way to import one library is to first switch iPhoto to open using that library (hold down the option key when opeining iPhoto and selecting that Library). Select your photo's, and the go to File>Export. Then quit iPhoto and switch to the new iPhoto Library and go to File>Import and select the file that was made during the Export. I suspect this is the approved method if you are not concerned with importing the edited photo's, keywords, etc. Is this correct?
I recognize from LarryHN's posts why you can no longer just drag and drop the files using the Finder, but if we don't use iPLM, I wanted to make sure I use the correct method to combine Libraries.
BTW, speaking of using the Finder, do any of you remember the Multi-Finder?

Yes that's correct. Remember you are not importing libraries or merging them or combining. You're exporting from one and then importing those exports to the other. That's getting the photos from one to the Finder. Then importing them.

Best app to import and study multiple choice questions.

Hi,
I'm searching for an app to help study for an exam.
Part of the studying strategy is to study by the previous exams questions. I have those (a lot of them) in text format.
The app would need to have:
- Support for multiple-choice questions;
- Easy, fast and automated way of importing the questions;
Would be nice to have:
- Ability to include a rich-text comment along with the right/wrong answer;
- Support for tagging each questions.
I've used the search function and found this:http://forums.macrumors.com/showthread.php?t=1041085 but it's been a while since then.
thanks in advance

Hi Konrad;
What approach would you recommend to import and export EBS data? Open Interfaces, PL/SQL, web services or anything else?For your question please check below notes:
Export/import process for R12 using 11gR1 [ID 741818.1]
Export/Import Process for Oracle E-Business Suite Release 12 using 10gR2 [ID 454616.1]
General Notes For E-Business Suite Release 12 [ID 986673.1]
Please also check below thread:
how to export data from ebs
how to export data from ebs??
Also check below search which could help you about your issue:
http://forums.oracle.com/forums/search.jspa?threadID=&q=import+export+&objID=c3&dateRange=all&userID=&numResults=15
http://forums.oracle.com/forums/search.jspa?threadID=&q=export+data&objID=f475&dateRange=all&userID=&numResults=15&rankBy=10001
Hope it helps
Regard
Helios

Importing and Exporting Data with a Clob datatype with HTML DB

I would like to know what to do and what to be aware of when Importing and Exporting data with a Clob Datatype with HTML DB?

Colin - what kind of import/export operation would that be, which pages are you referring to?
Scott

I get this error when I go to imovie, I have instalerat on via appstore, but it does not work. The QuickTime components necessary to view, edit, import and export various types of films are not installed. The components included in the iMovie installer. R

I get this error when I go to imovie, I have instalerat on via appstore, but it does not work.
The QuickTime components necessary to view, edit, import and export varioustypes of films are not installed. The components included in the iMovie installer.Reinstalling iMovie.

I get this error when I go to imovie, I have instalerat on via appstore, but it does not work.
The QuickTime components necessary to view, edit, import and export varioustypes of films are not installed. The components included in the iMovie installer.Reinstalling iMovie.

Problem with Import and Export Data Wizard

Downloaded and installed SQL Server Express 2008 R2 today because I want to explore how Access interacts with SQL Server (using my home computer). I'm using Access 2010 (under Windows 7), so the 2008 version of SQL Server Express seemed to be the version
to use.
After a couple of false starts, installation appeared to go okay. After the installation. My Start menu listed Microsoft SQL Server 2008 and Microsoft SQL Server 2008 R2. The latter listed Import and Export Data (64-bit). When I clicked that, the first Import
and Export Data Wizard page was displayed. I wasn't ready at that time to explore the wizard, so I closed it. An hour or so later I again attempted to open the Import and Export Data wizard. This time, the wizard didn't open. Instead this error message was
displayed: "The SSIS Runtime object could not be created. Verify that DTS.dll is available and registered."
I found DTS.dll on my computer at C:\Program Files\Microsoft SQL Server\100\DTS\Binn, so the file is available, but don't know whether it is registered.
How can I correct this problem?

First can you please post all log file errors
>> I can't really give you a solution or specific recommendation since I did not saw this error yet myself, but on your own risk you can try:
1. You may try to just register 'dts.dll' using regsvr32.exe, but this error may indicate a bigger problem with setup.
If you are running SQL Server 64bit then try running this at the command prompt: %windir%\syswow64\regsvr32 "%ProgramFiles(x86)%\Microsoft SQL Server\90\dts\binn\dts.dll"
2. You can try reinstall from start (In this case you have to make sure that you un-install all)
[Personal Site] [Blog] [Facebook]

C:import and f:verbatim leads to invalid jspx?

Similar Messages

Maybe you are looking for