C6 00 compatible with BH-505

Hi,
Is Nokia C6-00 phone compatible with bluetooth headset BH-505. As per the product specification it's compatible with C6-01, I guess it should be compatible but better to be safe.
Regards,
Kavan
Solved!
Go to Solution.

Hi kavans
Please see attached file for the list of accessories compatible with Nokia C6-00.
Hope this will help you my friend! 
If my post helped you, please don't forget to click on the "White Star" and if it resolved your issue click on "Accept as Solution"
Attachments:
2013-02-12_223902.jpg ‏70 KB

Similar Messages

  • Is Nokia 701 is compatible with BH-505?

    Hi,
    Is Nokia 701 is compatible with BH-505?
    TIA

    bhprin,
    Yes, as the BH-505 is designed for use on Symbian devices in which the Nokia 701 runs.

  • RE: Best camcorder that is compatible with a MAC

    I just bought A Sony DCR-DVD 505 so I could download video's. It is one of the few that is not compatible with a MAC. Anybody know what camcorder would be best with MAC compatiblity and easy???

    This can be an issue but not always so. I've capture using a cheapo Canon camcorder, numerous XL1's, XM1/2's and, yes I've occasionally had a problem but only in a small %age of occasions - but, hey, I may just have been lucky.
    Yes it's worth bearing in mind, but I wouldn't eliminate Canon's solely on this basis. As a camera operator, you may prefer the features of a Canon and you can always add a 2nd FW bus via PCI FW card, or attach an external esata drive via esata card, although be sure to get ones which match your computer, there's differences between the earlier single and later dual core G5 Powermacs for example.
    Of course, you could always get a cheap non-Canon camcorder to capture with or a dedicated deck, if the budget will stretch to this.
    Another consideration is that using a camcorder (or deck) to capture with slows the rate of data capture (correct term??) to, I think 100MBPS, so if you have this connected to the same FW bus as the external FWHD, everything slows down to that speed, which can cause problems such as dropped frames.
    A 2nd FW bus enables you to keep the camera/deck attatched to a separate bus and the FWHD to operate at almost 400MBPS (Or 800, if using FW800 connectivity).
    You could also capture to an additional internal esata drive.

  • Mail app deleted and reinstall wont open, says not compatible with OSX

    i accindetally deleted my mail app and emptied the trash, when I tried to reinstall from the startup disk, it installs but wont open, saying that the version of mail is not compatible with the version of OSX (10.5.8)

    The Combo updater of Leopard 10.5.8 can be found here:
    http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
    There is no downloadable version of Mail.app - it comes with the operating system i.e. on your install disks.

  • I have Trend Micro antivirus for Windows 7, but I am being told it is not compatible with Mozilla 9.1, how do I get an older version or adapt?

    I am using a lap top, just reinstalled everything, and now have Firefox 9.1 and am being told it is not compatible with my antivirus, Trend Micro Titanium. I am running Windows 7.

    See:
    * http://community.trendmicro.com/t5/Home-and-Home-Office-Forum/Read-Me-Before-Posting-Titanium-Hotfixes/m-p/55632

  • I have installed Firefox4 to find it is not compatible with my version of OSX how do I get version 3.6 back or do I just give up and use Safari?

    I downloaded Version 4 and installed it. At no point did it say that it was not compatible with the version of OS X that I am running (10.4.11) now that it is installed it will not open but it has already up graded from 3.6 so I have lost the lot. How can I download a version of 3.6 so that I can use it again or should I just pack up and use Safari as all I can get from your site is version 4. HELP!!!

    Go to this link and find your language:
    http://www.mozilla.com/en-US/firefox/all-older.html

  • IPod 4,1 will not update to iOS 7. I updated my iMac to 10.9.1 (maverick). Latest Numbers version on iMac is not compatible with Numbers on iPod. Ideas? Can I go back a version with Numbers?

    iPod 4,1 will not update to iOS 7. I updated my iMac to 10.9.1 (maverick). Latest Numbers version on iMac is not compatible with Numbers on iPod. Ideas? Can I go back a version with Numbers? I downloaded old version of Numbers 2.0.1 from DVD but with both versions the 2.0.1 will not open.  So both versions are present but only the new version functions. I tried to drag the new version to the trash but the old version still runs error message and will not open. I did not try to restart with the new version in the trash.

    Maybe. See:
    Reverting to previous version of Numbers

  • I need to silently upgrade from 3.5 to 7 but get an error message after 7 install. Platform version 7.0 is not compatible with minVersion = 1.9.1

    I'm trying to silently upgrade my environment to FF 7. I've gotten the silent install working great, it puts in my Proxy Server info, reassigns the home page and all that. But, the last version we pushed out was FF 3.5. If a user had that on their PC and they run the FF7 install, they get weird messages when clicking on the icon.
    XULRunner: Error: Platform version '7.0' is not compatible with minVersion >= 1.9.1 maxVersion <=1.9.1
    Another message they get is:
    AutoConfigAlert:
    Netscape.cfg/AutoConfig failed. Error: pref failed: [Exception... "Component returned failure code: 0x8000ffff (NS_ERROR_UNEXPECTED) [nsIPrefBranch.setBoolPref]" nsresult: "0x8000ffff (NS_ERROR_UNEXPECTED)" location: "JS frame :: prefcalls.js :: pref :: line 70" data: no]
    This is on Windows XP

    Do you have other virtualization or security software that might protect .ini and possibly other files in the Firefox program folder (C:\Program Files\Mozilla Firefox\) and prevent Firefox from updating them properly?
    You need to do a clean reinstall.
    Download a fresh Firefox copy and save the file to the desktop.
    * Firefox 7.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Uninstall your current Firefox version.
    * Do not remove personal data when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
    * http://kb.mozillazine.org/Profile_folder_-_Firefox
    * http://kb.mozillazine.org/Profile_backup

  • After update to 3.6.20, ERROR, platform version 1.9.2.18 not compatible with Min/Max v 1.9.2.20

    Win2000 Pro SP4. Been running FireFox for several years. Ver3.6.6 since 03/22/2011. Got a msg window in FireFox stating important security update available. ''(ADDED INFO: Checked System Requirements of update and then...)'' As usual, I clicked yes load it. A few moments later I got the message: "XULRunner Error:
    Platform version '1.9.2.18' is not compatible with
    minVersion>=1.9.2.20
    maxVersion<=1.9.2.20"
    That is it, NO MORE FIREFOX!!! How can I fix it and not loose any of my 'stuff'?

    You're welcome

  • Add management server: Setup version: 7.0.9538.0 is not compatible with database version: 7.1.10226.0

    I want to add another management server to our existing SCOM environment. But whenever I run this setup on a new server I get stuck in the window for selecting the OperationsManager database. The database field stays blank and in the OpsMgrSetupWizard log
    there are lines that the setup version is not compatible with the database version. But I use the same installer as when I installed the other management servers a year ago.
    Maybe there is a newer setup installer? But I can't find it.
    [10:42:54]: Error:
    :Error:setup version: 7.0.9538.0 is not compatible with database version: 7.1.10226.0
    [10:42:54]: Info:
    :Info:Using DB command timeout = 1800 seconds.
    [10:42:54]: Info:
    :Info:isOMDatabase:  Read returned true.  so far, this is OM DB, not an empty DB
    [10:42:54]: Debug:
    :Connection was not open.  We will try to open it.
    [10:42:54]: Debug:
    :SqlConnectionReady returned True.
    [10:42:54]: Info:
    :Info:Using DB command timeout = 1800 seconds.
    [10:42:54]: Info:
    :Info:isOMDatabase:  Read did not return true.  The MG is missing. This is not OM DB
    [10:42:54]: Info:
    :Info:Using DB command timeout = 1800 seconds.
    [10:42:54]: Always:
    :Azman store table not found in OperationsManagerDW table, assuming this is an not a valid OMDB for empty DB scenario.
    [10:42:54]: Info:
    :Info:DatabaseConfigurationPage: DB connection attempt completed.
    [10:42:54]: Info:
    :Info:DatabaseConfigurationPage: DB connection attempt completed.

    Never mind, found it!
    Apparently there was a newer version of SCOM setup in msdn and someone upgraded our existing SCOM environment. Downloaded the new setup, new report viewer controls and a System
    CLR Types for Microsoft® SQL Server® 2012 and now it works!! 

  • I'm getting this error statement: XULRUNNER error: platform version 6.0.2 is not compatible with min etc max etc6.0.1 - what is this about and how can it be corrected?

    This is what I think may have happened. The other day, Thursday Sept 8th, I shut down my pc in the middle of a Firefox upgrade. Now when I try to access Firefox on my pc, I get this error message:
    XULRUNNER Error: Platform version '6.0.2 is not compatible with min Version >= 6.0.1 max Version < 6.0.1
    What is this about and how can I retsore access to Firefox on my pc?

    If you use ZoneAlarm Extreme Security then try to disable Virtualization.
    Do a clean reinstall and delete the Firefox program folder.
    * http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
    *[[/questions/869812]]
    *[[/questions/869951]]

  • How do I uinstall Yosemite? It's not compatible with my older MacBook Pro, and I can't connect to my printer or use safari

    How do I uninstall Yosemite? It's not compatible with my older MacBook Pro and I can't connect to my printer or access Safari

    How to Downgrade OS X Yosemite Back to OS X Mavericks

  • Is Ipod compatible with Windows VISTA?

    Hi Folks
    Sorry - may have posted in the wrong discussion, but here's trying!
    Read some posts on this subject before, the suggestion is not, the iPod shows up as a removable drive in VISTA but iTunes won't sync - that was RC1 and not release versions. I'm looking to upgrade from XP Pro to VISTA on my home PC (I have the media and my PC is shown as compatible so just I'm itching to make the install!) but worried I'll lose connection to my iPod from iTunes. Anyone done this yet, what was your experience?
    Regards
    Jay

    iTunes is not 100% compatible with Vista.
    The filter driver for the burning component of iTunes does not function. If you install iTunes, you will need to remove it by going to Device Manager then View -> Show Hidden Devices.
    Expand Non-Plug-and-Play devices, find PxHelp20. Right click that and select Uninstall.
    You may have to restart. After this, iTunes will function except for the burning component.

  • Xbox 360 no longer compatible with my Ipod

    I have been using my 4th gen Ipod with my 360 since January of this year...now everytime I pluged it in to my 360 it recognized it by it's name and I could choose any playlist I want with no problem...now from 2 days ago on, my 360 no longer see's the ipod by it's name but shows it as "audiobook" and I can not see any playlists on it what so ever...
    If I unplug it from my 360 or plug it into my computer it's fine and works great, but when it's plugged into my 360 the name is changed and my playlists are not there.
    I'm thinking it might be something in the last update 7.3 for Itunes which might not be compatible with the 360, which is the only thing that has changed in the last week.
    Anyone else having the same problem with his/her Ipod/Xbox360? And is their any suggestions on how to fix this?

    I got it working yesterday...you have to uninstall everything that has to do with Itunes and quicktime from your computer, even the mobile update...then search google for Itunes 7.2 (it's out there)reinstall 7.2 and turn off the automatic updates. plug your Ipod back into your computer open up Itunes...then when you eject it from your computer, plug it back into your 360 and it should be working just fine!

  • I installed a new printer and now Photoshop Elements tells me I can't print.  The error message is "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available.  You will need to che

    I installed a new printer and now Photoshop Elements tells me I can't print.  The error message is "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available.  You will need to check your printer settings before printing."  I have uninstalled and re-installed Photoshop Elements, checked my printer settings and still I can't print a photo.

    Hi ,
    Please update to PSE 13.1
    13.1 has solved this problem.
    Refer to this link.
    Photoshop Elements Help | Printer errors with Photoshop Elements 13

Maybe you are looking for

  • Radio button and selection screen

    hi my requirement is that if the user enters some particular combination of value in the select options and clicks a particular radio button there should be an error message displayed. 1)  I am getting the error message in the form a dialog box , but

  • Commission Query not picking up payment on Account linked later

    Hi Experts, I created a query for a Client who need to pay Sales Commission to Sales Employees. This report must show only the Invoices that was Paid. The Query works fine, exept that it will not pick up the following Payments: When they makie a Inco

  • No Page Display in Portal (UWL)

    Hi all, Currently, I have a user who normally can approve one employee leave request under a role. Now, although employee has submitted leave request via portal, the user (approver) couldn't load the page (where he/she normally approve the leave requ

  • Table required for billing and RG1 output

    Dear all, pls give me the list of tables required for billing output and RG1 output

  • Landline cancelled without customer's consent or r...

    BT has shown initiative and cancelled my landline without my consent! I am moving house next week and my landline is the conact numbers for movers, decorators, builders, etc and it is nothing short of disastrous. I am also in trouble with O2 now as i