C6 not responding when launched
My Photoshop c6 was working just fine yesterday ! Now when I open it its not responding I can't even update it cuz its thinking! help
usually when we select ( FILE >> IMPORT TO STAGE/LIBRARY ) a window will pop up in which we can select our file to be imported.
In my case, when i select ( FILE >> IMPORT TO STAGE/LIBRARY ) the adobe flash cs4 will be not responding and the window will not appear anymore because of this.
what im trying to import is a small jpeg file. pls help me....
Similar Messages
-
Logic Pro keeps (Not Responding) when launched or opening tracks...
Running logic Pro 7.2.1 on Power Mac G5 and using a Tascam FW-1884 control surface. During startup logic Pro hangs. Sometime if a song is opened via "Finder" it opens fine, but most times it just hangs. Also, not sure if this is related, but all logic pop-up window have this funky maroon color and its hard to read the text and button can't be seen at all.
PLEASE help!!!!!! Production DOWN!
-ChicoI had many problems with my Mac G5 2.7 refurb/Logic 7.2.1 when I first got it back in March. Although my problems were different than yours some things I remember doing that helped:
Trashing Logic's preferences fixed a situaution where my Logic windows were flashing randomly and Midi info was corrupted causing my Mackie Control Universal and my Korg Triton to freak out Logic.
Repairing disk permissions because 2 times Logic did not totally install correctly. Yes I reinstalled Logic at least 4 times to figure out why I was having freezeups system wide.
Working closely with Apple Care documenting my problems and finally getting my local Apple store in our local Mall to change out the motherboard, dual processors and optical drive. Yes essentially a new computer. Since that time I have not had one system wide freezeup (any wood around here)
or major problem.
AT one point running the "Quick Test" from Apple's startup disc showed a Bad RAM chip. Again not related to you but running the test could show something.
I have 2 issues left to fix - Logic 7.2.1 for me has a transposition problem. Midi tracks will show up after I open a song file transposed down a step. The fix is to reboot Logic which is a pain. 2nd - Annoying beep coming from my power supply. Beep is audible in studio near the tower and is also in the audio chain coming out of speakers. No fix yet but again I'm working with Apple Care. -
Acrobat XI "Not Responding" when Launched
The hang time varies - it's been as long as 60 seconds - but there's an issue every time I open a PDF with Acrobat. The only exception is if I already have Acrobat open with another document. There are no updates available (11.0.05) and I've uninstalled/reinstalled. I'm using Windows 7 Home Premium and CC.
Any ideas?
Thanks in advance. Hope everyone's having a great day!Hi,
I created a redaction mark on some text and then applied redaction. It worked fine for me. I used Windows 7 64 bit machine. If the workflow that you are doing is different from what I did, then please give the detailed steps.
Also, please try creating a simple pdf file containing only text and check if the redaction is getting applied. If the redaction is getting applied successfully in it, then please share a pdf file in which applying redactions freezes Acrobat.
Thanks,
Nupur -
The volume up and down controls on my wireless keyboard show a no entry sign and do not respond when used...please help?
If you want to get a little more "exotic" you can try remapping the function keys. I did a little google searching and the hits that looked promising are,
Mapping volume and eject keys to 3rd-party keyboard Other Hardware
Spark
Spark is a powerful, and easy Shortcuts manager. With Spark you can create Hot Keys to launch applications and documents, execute AppleScript, control iTunes, and more...
You can also export and import your Hot Keys library, or save it in HTML format to print it.
Spark is free, so use it without moderation! -
Acrobat Pro is now constantly giving me the error message (program not responding) when I try and perform any kind of action.
Hi cruzsanta03,
Can you please let us know the following:
- Operating System;
- Complete version of Acrobat installed;
- Experiencing this issue with a particular file or all PDF files;
- Experiencing this issue while performing a particular task or with any task;
- Files are saved on the local machine or on a share drive;
- Launch Acrobat in Safe Mode and then check the issue. Hold 'Shift' key and launch Acrobat, and then check the issue. -
Pages is "not responding" when I try to open any document on a Lion Operating System, Macbook Pro. What can I do?
Ah then that is the issue.
1. Is Pages registered? It turns into a demo version after 3months otherwise.
2. This makes it interesting as to what happens if it has, because a demo version can't/won't save and I'm curious if this causes a bug in the ever so wonderfully thought through process of versioning in Lion
3. There may actually be a problem with one of the documents which again causes a bug in the ever so wonderfully thought through process of versioning in Lion
4. You are entitled to AppleCare telephone support to try ands resolve this in detail which is difficult to do without seeing what is actually going on because there are multiple files involoved
5. Which raises the issue of does it freeze consistently on hitting a certain document? In which case moving or archiving that document may get Pages to actually launch
Peter -
Muse5 not responding on launch
Muse5 not responding on launch requiring reboot of my Mac.
Twice a week is my estimate.
Adobe App Manager same issue same time.
Annoying.
Cause?My next step would be to start writing down what programs were open and what task you were doing when it happens and look to see if there is any pattern.
Another thing that may be possible is if Muse has some sort of cache file that gets corrupted similiar to what happens a fair bit in Dreamweaver. Not sure if Muse uses a cache file like that though - I'll check.
But regardless my next step would be to see if there is a pattern over time of when it does this. -
I am suddenly unable to open mail from the dock. dock shows mail is up and running, but stamp icon does not respond when clicked, there is no mail window opened, and will not quit. when double clicked, get new mail is not an option and I get no response with other actions.
I am retrieving mail on my phone with no problem. this just began happening, no updates or problems with anything else.
help?command-option-esc keys and force quit Mail. Then relaunch.
-
Itunes keeps not responding when i try to log out of my account
itunes keeps not responding when i try to log out of my account
I have tried uninstalling the itunes program and re Installing it but it has not worked,
Is there anyone that can help me?Have you tried leaving it to hang for 5 minutes?
-
The pass 4 days now my iTunes Store is not responding, when I reload it all that comes up is a blank white page that says iTunes Store. Help please!!!! Cannot load my gift card to buy music and such!!!
I tookyour suggestion and SUCCESS! I can now access the Itunes Store. A simple fix, and thanks so much!!.
Below is the advice you forwarded:
I found a solution to my problem.
> start menu
> accessories,
> right click on the command prompt icon and choose "run as administrator".
Once it opens, type in the following command...
netsh winsock reset
hit enter
You should get a message that the winsock reset successful and you will need to reboot your computer.
Reboot and when I reloaded itunes the store loaded fine.
Thanks again, -Dean Stoneburner -
my ipod touch is not responding when i plugged it in even with a different cord and restarting my computer and i am using my moms itunes that she has had for a long time and so i cant uninstall itunes.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I am running
Windows 7 64 bit
Access 2010 32 bit
Developing an application with a split FE BE with both files local but continue to have the message "Not Responding" when switching from forms view to design view and back as well as if I try to connect to a subform or object on the sub form.I have seen this behavior when the form's RecordSource is a complex query such as a crosstab or a query with several nested queries. To test if this is your case, remove the RecordSource and see if the form starts acting normal again.
Then again, if the form has several subforms they might be slowing up the loading time.
Bill Mosca
www.thatlldoit.com
http://tech.groups.yahoo.com/group/MS_Access_Professionals -
Hello,
I am running Snow Leopard Server 10.6.8 and my clients are Lion 10.7.4. While testing I had no issues binding 10.7.4 to our 10.6.8 server's OD. I created a 10.7.4 image to push to all of our machines and in the beginning of last week I was able to push the image and get the machines to bind with OD and apply preferences on these machines through workgroup manager. Towards the end of the week though this stopped working. Now any time I bind a 10.7.4 client to OD it allows me to perform an authenticated bind and the machine shows up in workgroup manager but immediatley after binding the client the status jelly next to the OD server in the directory list is red and says "This server is not responding". If I reboot the client I get a notification that "Network accounts are unavailable" at the login screen. My preferences from workgroup manager are also not applying, which is my main concern because without workgroup manager my mac server is somewhat pointless as we use it for very little else.
I've since tried to bind a snow leopard machine (10.6.8) and this still is working with a green status jelly. I've also built a lion machine from scratch, updated to the 10.7.4 combined update and am still getting the same issue where it shows the server is not responding when binding to OD. I then applied the subsiquent OS update after the 10.7.4 combined update but the problem still persists.
Is anyone else having this issue? Any help would help me keep my sanity.
Thanks,
DaneHave you had any luck finding a solution to this? The only thing I have found was to unbind and then bind without authentication. Any help with progress on your end would be appreciated!
Nick. -
Photoshop CS6 is not responding when leaving PS and coming back again
A weired problem: My new installation of Photoshop CS6 (OS X Mavericks on a new MBP) is not responding when leaving PS and coming back again.
Example: i open a new file in PS - then i click on the desktop - when i go back to PS again, it is not responding to any click on any window (except for the menu bar).
I can solve the problem when i try going back several times or when i go back to PS via the icon in the dock.
But it is still very annoying in a quick workflow.
I would appreciate any idea what i can check more, cause i tried everything and i can’t find this issue on the web…
Thanks…Problem solved… The troublemaker was the Trackball Works Driver for Kensington trackballs / Expert Mouses…
I’m now using a generic driver for USB devices and everything is fine. -
My computer had to be shut down this morning when I could move my mouse around but it would not respond when I double clicked on an item to select. Now I cannot open a file in my finder window by double clicking on it. Any suggestions?
Did you reinstall CS3 after CC?
For that matter, doing an in-place upgrade on the OS is always a gamble with Adobe programs. Reinstalling all the versions you need, in order, would probably solve your problem.
And you shouldn't need to save as IDML after opening the .inx in CC.
Maybe you are looking for
-
Trying to update my device software
I'm trying to update my device software. There is new software that's available for my BB 8900 but my wireless provider has the older version v4.6.1.250 I've tried to download from the BB website but fails to do so. Has anybody updated their curve 89
-
Where to locate XL reporter.msi file
Hey all, whenever i click on XL reporter from tool it ask to locate XL reporter.msi file but i am unable to find one, it occur on WIN 7 prof. 32 bit OS but runs perfectly on WIN XP. is there any prerequisite for XL repoter on WIN 7 32 bit OS
-
Help Please: Multiple Contacts on Multiple Computers question
Facts: *This questions concerns iPhone 3GS. *My wife has a business computer and sync's her contacts and calendar with the iPhone. *She also has, within her Outlook, a pst file for personal contacts. *She would like her business and personal contacts
-
Question about camera compatability
Hi, I bought a DVD Panasonic VDR-D200 camcorder only to find that it doesn't work well with iMovie 6 because it doesn't use Firewire, only USB. I've been hearing the term miniDV in the discussion forums and now I'm confused...how many typs of camcord
-
Carry formula in vba to next line
Hello. I am working on a spreadsheet with vba, etc. I am using a formula (see below) in the vba macro but would like to split the length of it into 2 lines. Currently it is one long line. How or what needs to be done to put it on two lines correc