C7280 Error Code and Flashing Lights

Hi my C7280 all in one printer keeps turning itself on and all of the lights flash, the error code displayed is B04952C6.
Can anyone please help or is it beyond repair.
Many thanks.

The codes your getting are caused by fatal errors in the firmware of the printer. The printer you have will determine the steps you can try. What printer are you using? I'm sure it's the same one as the original poster, but I need to be sure.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Similar Messages

HP C309a - Blue screen - C2FE0100 Error code- 7 blinking lights!

HP 309a - Photosmart - Up-to-date drivers, New ink too. Cleaned print head with alcohol wipes. Will not print. Control panel screen displays HP logo for about 7 seconds, then the display turns blue with white letters/numbers : C2FE0100, then same panel turns white but 7 panel lights flash. Flashing lights are on the exclamination mark, red eye removal, print photo, auto answer, power button, wireless network indicator and bluetooth indicator lights. Only way printer will turn off and on is by unplugging from power source. Printer makes no sounds when power is connected. Managed to print 2 test papers and they looked ok. Ran the HP Print Diagnostic Tool during that approximate 7 second moment before everything started blinking and according to it:, "No problems were found for HP C309a Series." Utility checks: Connectivity, Spooler, Driver, Device Mgr., Printer Online, Device Status, Print Queue, Conflicts, and Default Printer. Purchased March 2010. Within 10 days of purchase, had print head problems and it was replaced. Different error code received then. 2 Weeks from end of semester...not a cool time for printer failure!

Hi there,
I understand you're having some issues with your Photosmart C309A giving an error and flashing lights. I will certainly do my best to help you with this.
Generally the error that you all are describing is caused by the firmware of the printer. The first thing I'd like you to try though, if it isn't already, is to plug the printer directly to a wall outlet to make sure it's getting all the power it needs to function properly.
Please let me know if this step changes anything, if not we will move on to a reset of the product. Have a great day!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

My ipod touch is not list as a device on itunes. When I tried do update itunes, I get a ox8007054f error code and the update will not complete.

My ipod touch is not listed as a device when connected to my computer. As suggested I attempted to download the latest of itunes. I got an
ox8007054f error code and the down load will not complete. I have also tried to restore my computer to an earlier setting, but it will
not accept the change.

Have you looked at this completed previos discussion. It discusses 0x8007054F.
Re: Error message when trying to install iTunes

Oracle List of Error codes and messages

Hi,
In our application we are planning to use sqlloader to load a huge amount of data into the database. However, to parse the log file we need a list of Oracle error codes and messages that are commonly encountered while loading data using sqlloader. Does anyone know where to get such a list?
Thanks

In our application we are planning to use sqlloader to load a huge amount of data into the database. However, to parse the log file we need a list of Oracle error codes and messages that are commonly encountered while loading data using sqlloader. Does anyone know where to get such a list?I don't know where to get such a list, but for a start you could search the log for the words "Error" and "ORA-"

My iPod Classic 120GB is clicking and not turning on. It has been charged but does not hold charge. I am not able to restore factory settings. Error code and have tried troubleshooting options without success. Thoughts?

My iPod Classic 120GB makes a clicking noise when syncing with iTunes and will not sync. It will not turn on at this time and has been charged but does not hold the charge. After trying to sync, iTunes states that iPod must be restored. Have tried to do this but not successful, I receive an error code and have done the troubleshooting steps for the error and I am still not able to sync or use my iPod. HELP?

Hi mafiose15,
Thanks for visiting Apple Support Communities.
Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
You can find the instructions in this article:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
All the best,
Jeremy

I have an iPod Classic 160GB and now it will not sync. I have restored to factory settings multiple times. It freezes during sync, gives -50 error code and says video is not supported on iPod. Please help.

I have an iPod Classic 160GB and now it will not sync. I have restored to factory settings multiple times. It freezes during sync, gives -50 error code and says video is not supported on iPod. Please help.

This is the iPod touch forum. I requested the moderators to move your post to the iPod classic forum.

Problem Getting Error Code and Description in Alerts

We are having trouble getting the Error code and Error description in the Alerts and we're having trouble getting a alert for message mapping exceptions. I have read through the BLOGs and the help on SAP. I'm not sure it is something to do with the configuration or SP14. We did not have these problems with SP12 at our other customer XI implementations.
Background -
We have setup an "XI Alert" classification with three Alert categories -"XI_Mapping_Error", "XI_Adapter_Error", "XI_Runtime_Error".
For the "XI_Mapping_Error" alert category, we have setup a rule so that any Integration Engine Application Mapping.* Error code will create an alert. However, when we have a mapping error in XI which we can see in MONI, we do not get an alert. The checkbox for "Suppress Multiple Alerts of this Rule" is not selected. I am not sure why we're not getting the alert.
For the "XI_Adapter_Error" alert category, we have setup a rule so that any Adapter Engine * adapter type will create an alert. The alert gets created - however, some of the container variables do not get poulated in the email. We have defined Container variables pointing to the corresponding ABAP data dictionary elements - i have double checked these definitions.
Here is an alert email - the Error Code (SXMS_ERROR_CODE - SXMSERRTX) and Error Category (SXMS_ERROR_CAT - SXMSERRCAT) are not being extracted:
Alert ID: ##23896##
Error Code =
Error Category =
Message ID = 1506eab0-6125-11da-9ba2-00505685 Time = 14:26:12 Date = 29.11.2005
Sender Party =
Sender Service = BS_CPI
Sender Interface = MI_CPI_INV_RFC_REQ_ABS
Receiver Party =
Receiver Service = BS_CPI
Receiver Interface =
We are not able to figure out why the Alert framework is not working correctly. We are running XI 3.0 SP 14 on Win2K, SQL 2000.
Anyone encounter these problems? Any help would be appreciated.
Regards,
Jay Malla

>> There are some problems with SP 14 and the alert framework.
Very true! Join the team!
>> We applied Note 876546 which triggered certain alerts that were not getting triggered. However, we're not getting the Error code and Error Description in some of the alerts.
Jay, This note is specifically for a situation where the 'where did the error occur' set to No Restriction. I don't think anything else is included in this fix .01 to patch 0.9 of SPS 12 of XI 3.0!!!
My problem is that even the messageID variable is not getting replaced!!! In SP12 everything was perfect. After SP14, the errors are coming almost instantaneously to the inbox, but without any variable replacement.
Best of luck,
Kannan

After instaling the ios 8.2 my camera and flash light stoped to work. I have a iphone 5c.

iPhone 5c
ios 8.2
camera and flash light stoped to work

Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

I have a 1654 error code and is not listed....what do I do?

i have a 1654 error code and is not listed. what do I do?

Try disabling the Ask Toolbar extension.

Strange noise and flashing lights -- can this be battery/power-related?

I have had two occurrences of a very strange sound and never-before-seen flashing of a light on my TiBook. Here is what happened:
I recently got a new battery (a NewerTech Extend 4800) for my 3 year-old PowerBook. I carefully followed the directions that came with the battery and installed it, then plugged in the power adapter to charge it up. I then started the computer so I could see the battery’s progress. Upon start-up, a “whooo” sort of sound came out of the computer for a few moments and the little sleep indicator light flashed several times (as did the apple light on the back of the computer lid). Nothing appeared to be out of order and the computer started normally otherwise. I was able to monitor the battery’s progress and since everything seemed to work normally and no one I talked to seemed to think I’d damaged anything, I just used the computer normally for the next two weeks with no problems.
Then last night the computer just shut down all by itself – I did not put it to sleep and it is not set to go to sleep on its own (my power saving setting is only set to dim the screen), nor did I click “shut down.” I thought perhaps somehow the power cord had not been attached and the battery had run down, although the new battery has been warning me properly when the battery is getting low, so that doesn’t make sense. It would not wake, so I restarted it. Upon restart, the same noise and flashing light situation occurred again.
I called the company that sold me the battery and the tech guy’s suggestion there was to reset the PMU and he gave me an Apple article to instruct me on how to do that. I have done that, but there is no evidence that that has solved whatever the issue was. I am hoping that someone can identify the sound and lights pattern and advise me as to whether it is some more serious issue, or if it’s nothing to worry about. It has been suggested to me that it is possibly a power adaptor issue, but since I’ve run down and recharged the battery without incident several times in between the two occurrences, that doesn’t seem logical either. Is there a known signal a computer makes when there is some power/charging issue?
Thanks for any help you have or for at least posting if you have had a similar experience. So far, no one I’ve talked to has ever heard of this before.
15" Powerbook G4 (tiBook), 1 Ghz, 1 GB, Super Drive Mac OS X (10.4.3)

Hi ChloeB,
Your description of the "moaning" sounds at startup sounds like something I'm dealing with. I came across the following post by EWW in the "My Powerbook Won't Start Up". I recommend the link and wish to specifically credit EWW with the posting, as I found it helpful. The URL is
http://discussions.apple.com/thread.jspa?threadID=380101&tstart=0
Begin Pasted Posting
Hi, limberlingo, and welcome to Apple Discussions.
Power On Self-Test Beep Definition - Part 2 (Oct. 1999 and later Macs)
http://docs.info.apple.com/article.html?artnum=58442
1 beep = no RAM installed
2 beeps = incompatible RAM types
3 beeps = no good banks
4 beeps = no good boot images in the boot ROM (and/or bad sys config block)
5 beeps = processor is not usable
Your Powerbook is not detecting any good RAM at startup. This may indicate that your RAM (all of it — do you have one module or two installed?) has gone bad, or that it isn't seated properly. The first thing to try is reseating it: remove the module(s) and then reinsert it(them). Then try starting up again. If that doesn't do the trick, and you have only one RAM module, it's probably bad and will have to be replaced. A single RAM module having intermittent problems before failing completely (as it apparently has now) would account for all your problems.
If you have two modules, it's much less likely that both of them have failed or loosened in their slots simultaneously. Post back with results of your testing.
End of Pasted Post by EWW
There's another thread I found where one of the causes of a three-tone warning was found to be a pinched ribbon cable coming off the bottom of the trackpad. You can find that in the thread titled "Solution to Freezes Caused By Ribbon Cable" - - the information provided by Marc Posner, Anthony Brade and others.
The URL is
http://discussions.apple.com/thread.jspa?threadID=228678
Hope this helps.
Paratus

When synchig my iphone to my itunes, I get an error message at the end with code 1150. What is this error code and what does it mean?

When synching my iphone to my itunes, I get an error message at the end with code 1150. What is this error code and what does it mean?

try uninstalling and reinstalling itunes on your computer. here is a link for that http://support.apple.com/kb/HT1925

Error code 4002 flashes everytime I use itunes?

Error code 4002 flashes everytime I open my library. how do I fix It?

Does this help?
https://discussions.apple.com/message/19713445#19713445
tt2

How to find all ORA error code and the message in Oracle10g?

Does anyone knows how to list all ORA error code and message in SQL Plus or find a full list of ORA error code in documentation?

If you want ALL Oracle ORA error codes in single page or even downloadable (html or pdf format) then check following post.
http://www.oratraining.com/blog/2010/08/complete-list-of-all-oracle-ora-errors/
Regards,
Tushar
Edited by: oratraining on Aug 18, 2010 12:20 AM

Error codes and links appeared on my firefox window

I use mozilla firefox as my default search engin. After installing google chrome on my laptop "hope to get faster internet" for nothing, i've noticed there's alot of error codes and links all over my firefox window...etc. "XML Parsing Error: unclosed token Location: chrome://browser/content/browser.xul Line Number 1, Column 16086:<?xml version=....As because of this my videodownloader toolbar is not visible. Please i need help... Tazzwon

Marla,
Sounds like you hid the Menu bar. Hit the '''Alt''' key to show the Menu bar, then open View > Toolbars and select Menu bar, so it has a check-mark.
Anonymous,
Open the View > Toolbars menu and select what you want to see.

Where can find Oracle error code and message?

Where can find Oracle error code and message?

http://otn.oracle.com/pls/db92/db92.to_toc?pathname=server.920%2Fa96525%2Ftoc.htm&remark=docindex
That would be the "Error Messages" manual.

C7280 Error Code and Flashing Lights

Similar Messages

Maybe you are looking for