CA web enrollment page is not shown in windows server 2008 R2 Datacenter edition

hi friends
on a windows server 2008 R2 Datacenter, i have installed ADCS (including web enrollment), & every thing is ok.
but when i connect to CA web enrollment page to request a certificate for my web server, when i select advanced certificate request, system doesn't show the page which we select which register our name & specification & we select which certificate
template do we want.  instead it shows the page 
in windows 2008 R2 enterprise edition this problem doesn't exist. also in standalone CA web enrollment page this problem doesn't exist.
any help pleas
thanks in advance

forget about enrollment web pages. With Enterprise CAs you should consider to use Certificates MMC snap-in:
http://technet.microsoft.com/en-us/library/cc754490.aspx
My weblog: en-us.sysadmins.lv
PowerShell PKI Module: pspki.codeplex.com
PowerShell Cmdlet Help Editor pscmdlethelpeditor.codeplex.com
Check out new: SSL Certificate Verifier
Check out new:
PowerShell FCIV tool.
hi thanks.
i am familiar with cert snap-in, but i wanted to know can we restore previous web enrollment page which delivered us the ability of enroll

Similar Messages

  • Web Service Client(Console App) not working on Windows Server 2008 R2 Standard Edition

    I am trying to consume an ASMX Web Service in a console app, its working fine in Windows 7,Windows Server 2012 Standard,Windows Server 2008 R2 DataCenter,Windows Server 2008 R2 Enterprise, But its not working in Windows Server 2008 R2 Standard Edition which
    is the deployment server.
    I tried consuming the ASMX web service using Web Reference and Service Reference as well but its not helping. Its throwing up the following error,
    Message:There is an error in XML document (1, 331491).
    Inner Exception : System.Xml.XmlException: '.', hexadecimal value 0x00, is an invalid character. Line 1, position 331491.
    The scenario is that i call the web service and it returns me an XML i am not able to receive the XML on Windows Server 2008 R2 Standard Edition.
    Please provide suggestions on this I need to resolve this ASAP.

    Hi,
    This question is better asked here:
    http://social.msdn.microsoft.com/Forums/en-US/home?forum=asmxandxml
    Experts here are more familiar about it and they can give you more efficient suggestion.
    Thank you.

  • Text frame not shown on windows server 2008

    I am facing the issue that on windows server 2008 the frame of a text fields are not shown. On windows 7 there is no issue. As example I have attached two screenshots showing that on windows 7 the frames for precision and scale are shown, but on 2008 not (additional info: the text field is there and can be edited).
    Do you know such an issue? Any suggestion how to solve it?
    Many thanks for your help
    Peter

    Hi,
    When you click the Plus sign next to a master page to create another master page, it doesn't inherit the objects from the master page. It simply creates a blank master page. If you want the new master page to inherit the objects, then right click the desired master page and select "Duplicate page".
    As far as child pages are concerned, yes, they should inherit all the objects and properties of the master page. It is really odd if its not happening for you. What happens when you right click the child page and apply desired master for that menu?
    Regards,
    Aish

  • Hard drive not recognized during windows server 2008 setup

    hard drive not recognized during windows server 2008 setup

    Hi,
    Whether the hard disk is recognized in BIOS?
    Connect it to another computer to see if it could be recognzied incase the cause is the disk itself. Also please check if it is really a RAID instead of a single hard disk - a single disk should be recognized directly while RAID cannot be recognized until
    a suitable driver is installed.
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Addon not working on Windows Server 2008 OS

    Dear Friends,
    I have developed an addon in XP and its working fine with XP operating system but it is not working on Windows Server 2008 Standard. Error is "An Attempt was made to load a program with an incorrect format.(Exception from HRESULT: 0x8007000B)".
    Regards,
    Mahesh.
    Edited by: mahesh A on Sep 19, 2009 9:26 AM

    Hi,
    Since only Windows 2008 SBS is supported with SAP Business One and that Server is available for 64bit Hardware as defined by Microsoft, I guess you should look into that direction.
    Regards
    Mario

  • Group Chat feature in Office Communications Server 2007 R2 does not work in Windows Server 2008 R2 domains

       Hello to all, there are two confliting articles about this topic:
       1-
    http://technet.microsoft.com/en-us/library/upgrade-domain-controllers-to-windows-server-2008-r2(v=ws.10).aspx#BKMK_Whatsnew : this one says that it does not work "The Group Chat feature in Office Communications Server 2007 R2 does not work in Windows
    Server 2008 R2 domains". This article was updated in 2013.
       2-
    http://technet.microsoft.com/en-us/library/ee692314(office.13).aspx: this other article says that it will function "Office Communications Server 2007 R2 Group Chat will function in a Windows Server 2008 R2 forest". This article was updated in
    2010 and was refered by the first one.
       What is the correct support position for Group Chat feature in Office Communications Server 2007 R2 and Windows Server 2008 R2 domains?
       Regards, EEOC.

    Hi,
    I notice the following sentence in the link below “Office Communications Server 2007 R2, Group Chat will not function in a Windows Server 2008 R2 forest or when Group Chat member servers are joined to a Windows Server 2008 R2 domain.
    We know of an issue with changes in Windows 2008 R2 that requires a Group Chat Client and Group Chat Admin Tools hotfix. The Group Chat Client and Group Chat Admin Tools hotfixes are currently scheduled for mid-April 2010.”
    http://blogs.technet.com/b/nexthop/archive/2010/11/06/supportability-for-office-communications-server-2007-r2-and-windows-server-2008-r2.aspx
    So in my opinion, if you update to the latest version of Windows Server 2008 R2, OCS Server 2007 R2 and Group Chat Client, Group Chat Admin Tools to the latest version, it should work.
    However, the best method for you is make a lab to test the problem firstly.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • Hp deskjet 2545 printer driver not supporting on windows server 2008 r2

    I have purchased a 3 in 1 hp deskjet 2545 printer. I am trying to configure in on my home laptop (HCL) operating system: windows server 2008 R2, but unable to configure it. customer support executive told me hp deskjet 2545 printer driver is not compatible on windows server 2008 R2.  but I have checked in my office and it is working fine on my office 2008 server. Please help.

    Hello Arvindk,
    Welcome to the HP Support Forums! I understand you are trying to use your HP Deskjet 2545 with your Windows Server 2008 R2. Because you are using a server your question will be best answered on the Commercial Forums: http://h30499.www3.hp.com/hpeb/ 
    I was able to find this document for Installing the Printer Software on Windows Server 2003 or 2008, which may be helpful for you.
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Colour Laserjet CM 1312nfi mfp not scanning on windows server 2008 r2

    I am running windows server 2008 r2. I have a Colour Laserjet CM 1312nfi mfp. Server does not pick up scanner. Is their software or utility to solve te problem. No software on Hp website.

    Hi,
    Hope the below document will help you.
    http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?spf_p.tpst=kbDocDispl...
    Regards
    Suganya

  • CRVS2010 not display on Windows Server 2008 64bit - IIS 7

    Hello every body !!
    I'm use VS 2010 and Crystal Reports for Visual Studio 2010 Beta 2 to build a website.
    When I build directly on the VS2010, report viewers  shows very well.
    But when I build up host Windows Server 2008 - IIS 7, then just get a blank aspx page and there are no error messages
    Please help me ! ! !
    Thank you ...
    http://a.imageshack.us/img808/6750/reportinvs2010.jpg
    Edited by: pumbanet on Sep 6, 2010 9:03 AM
    Edited by: pumbanet on Sep 6, 2010 9:11 AM

    What CR runtime did you deploy?
    Are you working under default or custom web site?
    BTW., the image link shows a pretty good report. Can you post an image of the blank aspx page?
    Ludek
    Follow us on Twitter http://twitter.com/SAPCRNetSup

  • Can not update on windows server 2008 R2

    Hi All
    I have been trying to update windows server 2008 R2 after doing a fresh install. i have used HP smart Start to do the install.
    I have a HP ML 350 G5 Server  
      this is the 3rd time i have tried to install . first time i used smart start and
    selected custom install and all the required drivers and updates downloaded from hp fine. i can connect to the internet fine but when i click windows update it starts checking for updates finds something some thing which i think is the update manager. then blanks out
    the down load screen and then it comes back on with windows could not search for new update error code 80072F8F. the second i just went with a streight install with out smart and got the same results then with smart start but express install. again with the
    same results.
    under update history i have windows update agent 7.6.7600.256 successful important 5/2/2011
    any help would be very greatfull
    Many thanks
    Richard C

    Here are some possibilities:
    Are the date and time correct? (See Windows Update error 80072f8f)
    Temporary connection-related errors may occur when you use Windows Update or Microsoft Update
    Jason Warren
    @jaspnwarren
    jasonwarren.ca
    habaneroconsulting.com/Insights

  • DBCA error ORA-01034 oracle not available on Windows server 2008 r2 64

    Hi All,
    I have installed oracle 11.2.0.1 on my system having OS Windows server 2008. Then after that through DBCA i was creating the database during that i got ORA-01034 oracle not available. if any body know how to resolve it please reply me.
    Thanks & Regards,
    Arya

    Did you got the error in between when DBCA executed some percentage of work? PLease check its logfiles to get the exact error.

  • IE is not showing on windows server 2008 after updates

    Hi,
    I have installed Window server 2008 R2.
    After installing i found IE 8 on the server, but after 1day it automatically updated some softwares and now IE is not showing on my system.
    i.e IE uninstalled after the updates to the windows server.
    Please can some one help me to get the IE. I tried installing IE8, IE9 after downloading but it is showing "Internet Explorer 8 is not supported on this operating system"
    Regards
    Krishna

    Hi,
    Internet Explorer 8 runs on any of the following operating systems: 
    Windows Vista, 32-bit versions      
    Windows Vista, 64-bit versions      
    Windows Vista with Service Pack 1 (SP 1) or a later version      
    Windows XP, 32-bit versions with Service Pack 2 (SP2) or a later version      
    Windows XP Professional, 64-bit Edition      
    Windows Server 2003, 32-bit versions with Service Pack 2 (SP2) or a later version      
    Windows Server 2003, 64-bit versions with Service Pack 2 (SP2) or a later version      
    Windows Server 2008, 32-bit, or a later version      
    Windows Server 2008, 64-bit, or a later version 
    Please expand the below path to check whether IE is there:
    C:\Program Files\Internet Explorer
    Regards,
    Yan Li
    Regards, Yan Li

  • Ethernet controller driver not installing after Windows Server 2008 installation on Cisco UCS blade

    I am using MDT 2010 to deploy Windows Server 2008 to a Cisco UCS B200 blade. The OS and hotfixes install with no problem. The system reboots and attempts to connect to the deployment share to continue with the task sequence and I receive an error stating
    "A connection to the deployment share could not be made. The following networking device did not have a driver installed. PCI\VEN_1137&DEV_0043&SUBSYS_00481137&REV_A2"
    The driver in question is the driver for the Ethernet controller for the UCS blade. More specifically, it is the network driver for the Palo card in the UCS Chassis. When I Ignore or Abort the install, I am able to manually install the driver and restart the
    task sequence. The build then completes successfully with no further issue. I just cannot seem to automate the driver install. Has anyone dealt with this type of issue?

    Vik and stealthfield - thank you for your responses.
    I was preparing a script to manually move the driver into the c:\windows\inf location when I had to stop to create a new task sequence for a different build. It was while building this task sequence that I found the soulution to the problem.
    In the Post Install -> Inject Drivers step of the Task Sequence, I noticed that it was executing a command of type "Inject Drivers" with a selection profile of "All Drivers" and "Install only matching drivers
    from the selection profile" selected.         
    I changed this to run a command of type "Run Command Line" and specified that it execute "%Scriptroot%\ZTIdrivers.wsf". I noticed that this was selected in one of my other builds that was working properly, so I thought I'd
    give it a try. - IT WORKED.
    So to sum up, the solution was to change the type of command being executed in the "Post Install -> Inject Drivers" step of the task sequence. After this change, the machine came up and continued the task sequence with no further issues.
    Thanks again for the responses - They were helpful and I do appreciate it.

  • BMR/Systemstate backup not working on windows server 2008 error 2147942487

    Hi, trying to backup system image using SCDPM 2010 RTM.Most of the server are getting healthy backups except for this one server which is giving error:
    Affected area: Computer\System Protection
    Occurred since: 1/27/2014 2:43:27 PM
    Description: The replica of System Protection Computer\System Protection on server.DOMAIN.COM is inconsistent with the protected data source. All protection activities for data source will fail until the replica is synchronized with consistency check. You can recover data from existing recovery points, but new recovery points cannot be created until the replica is consistent.
    For SharePoint farm, recovery points will continue getting created with the databases that are consistent. To backup inconsistent databases, run a consistency check on the farm. (ID 3106)
    DPM cannot create a backup because Windows Server Backup (WSB) on the protected computer encountered an error (WSB Event ID: 517, WSB Error Code: 0x80070057). (ID 30229 Details: Internal error code: 0x809909FB)
    More information
    Recommended action: For resolution actions and more information on the WSB error, go to http://technet.microsoft.com/en-us/library/cc734488(WS.10).aspx.
    Synchronize with consistency check.
    Run a synchronization job with consistency check...
    Resolution: To dismiss the alert, click below
    Inactivate alert
    On the server, event viewer show the following events:
    1. Backup Log:
    Backup started at '2014-01-27T11:26:21.356950100Z' failed with following error code '2147942487'.
    2. Application Log:
    The description for Event ID 517 from source Microsoft-Windows-Backup cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
    If the event originated on another computer, the display information had to be saved with the event.
    The following information was included with the event:
    27-Jan-14 11:26:21 AM
    2147942487
    %%2147942487
    The resource loader failed to find MUI file
    However, when I observe the backup process using "wbadmin get status", it reaches 99% then stops.
    Running backup of volume Local Disk(C:), copied (97%).
    Running backup of volume Local Disk(C:), copied (98%).
    Running backup of volume Local Disk(C:), copied (99%).
    Backup stopped before completing.
    Summary of backup:
    Backup stopped before completing.
    The parameter is incorrect.
    The server hardware is HP blade with two disk which are mirrored, and has 12 GB free space. below is the output from systeminfo command:
    Host Name: server
    OS Name: Microsoftr Windows Serverr 2008 Enterprise
    OS Version: 6.0.6002 Service Pack 2 Build 6002
    OS Manufacturer: Microsoft Corporation
    OS Configuration: Member Server
    OS Build Type: Multiprocessor Free
    Registered Owner: Admin
    Registered Organization: -
    Product ID: 55041-339-7818202-76771
    Original Install Date: 04-Aug-08, 3:15:18 PM
    System Boot Time: 21-Jan-14, 3:58:47 PM
    System Manufacturer: HP
    System Model: ProLiant BL460c G1
    System Type: x64-based PC
    Processor(s): 2 Processor(s) Installed.
    [01]: Intel64 Family 6 Model 23 Stepping 6 GenuineIntel ~3000 Mhz
    [02]: Intel64 Family 6 Model 23 Stepping 6 GenuineIntel ~3000 Mhz
    BIOS Version: HP I15, 02-May-11
    Windows Directory: C:\Windows
    System Directory: C:\Windows\system32
    Boot Device: \Device\HarddiskVolume1
    System Locale: en-us;English (United States)
    Input Locale: en-us;English (United States)
    Time Zone: (GMT+03:00) Kuwait, Riyadh
    Total Physical Memory: 16,381 MB
    Available Physical Memory: 8,320 MB
    Virtual Memory: Max Size: 21,821 MB
    Virtual Memory: Available: 13,722 MB
    Virtual Memory: In Use: 8,099 MB
    Page File Location(s): C:\pagefile.sys
    Domain: DOMAIN.COM
    Logon Server: N/A
    Hotfix(s): 157 Hotfix(s) Installed.
    [01]: {47740627-D81D-4A45-A215-03B075A18EC7}
    [02]: {3D019598-7B59-447A-80AE-815B703B84FF}
    [03]: {A8E86480-A9C1-4414-8AA2-B05A485C82F0}
    [04]: {C444285D-5E4F-48A4-91DD-47AAAA68E92D}
    [05]: {DB33A524-845E-4855-9E90-A5619BCDD527}
    [06]: {ECC3A660-90E3-4A89-9FE8-F8B3C633B12E}
    [07]: {65AFCB03-3111-47E2-B1ED-198D6B0BC96E}
    [08]: {F5E29D9D-519A-36C7-87E3-9A22A8180B1B}
    [09]: KB971513
    [10]: KB971512
    [11]: 944036
    [12]: 982861
    [13]: KB960362
    [14]: KB2079403
    [15]: KB2117917
    [16]: KB2141007
    [17]: KB2160329
    [18]: KB2183461
    [19]: KB2207566
    [20]: KB2286198
    [21]: KB2296011
    [22]: KB2296199
    [23]: KB2305420
    [24]: KB2345886
    [25]: KB2347290
    [26]: KB2387149
    [27]: KB2388210
    [28]: KB2416400
    [29]: KB2416470
    [30]: KB2419640
    [31]: KB2423089
    [32]: KB2436673
    [33]: KB2442962
    [34]: KB2443685
    [35]: KB2447568
    [36]: KB2467659
    [37]: KB938464
    [38]: KB942288
    [39]: KB948609
    [40]: KB948610
    [41]: KB949189
    [42]: KB950762
    [43]: KB950974
    [44]: KB951066
    [45]: KB951698
    [46]: KB951978
    [47]: KB952004
    [48]: KB952287
    [49]: KB953733
    [50]: KB954155
    [51]: KB954459
    [52]: KB955020
    [53]: KB955069
    [54]: KB955302
    [55]: KB955430
    [56]: KB955839
    [57]: KB956250
    [58]: KB956572
    [59]: KB956744
    [60]: KB956802
    [61]: KB957097
    [62]: KB957200
    [63]: KB957321
    [64]: KB957388
    [65]: KB958481
    [66]: KB958483
    [67]: KB958623
    [68]: KB958624
    [69]: KB958644
    [70]: KB958687
    [71]: KB959130
    [72]: KB959426
    [73]: KB960225
    [74]: KB960803
    [75]: KB961371
    [76]: KB961501
    [77]: KB967190
    [78]: KB967723
    [79]: KB968389
    [80]: KB968537
    [81]: KB969058
    [82]: KB969897
    [83]: KB969897
    [84]: KB969947
    [85]: KB970238
    [86]: KB970430
    [87]: KB970653
    [88]: KB971468
    [89]: KB971486
    [90]: KB971557
    [91]: KB971657
    [92]: KB971737
    [93]: KB971930
    [94]: KB971961
    [95]: KB972036
    [96]: KB972270
    [97]: KB972636
    [98]: KB973346
    [99]: KB973507
    [100]: KB973525
    [101]: KB973565
    [102]: KB973687
    [103]: KB973917
    [104]: KB974145
    [105]: KB974318
    [106]: KB974455
    [107]: KB974470
    [108]: KB974571
    [109]: KB975364
    [110]: KB975467
    [111]: KB975517
    [112]: KB975560
    [113]: KB975759
    [114]: KB975929
    [115]: KB976098
    [116]: KB976264
    [117]: KB976470
    [118]: KB976662
    [119]: KB976749
    [120]: KB976768
    [121]: KB976772
    [122]: KB977165
    [123]: KB978251
    [124]: KB978262
    [125]: KB978542
    [126]: KB978601
    [127]: KB978886
    [128]: KB979099
    [129]: KB979306
    [130]: KB979309
    [131]: KB979482
    [132]: KB979687
    [133]: KB979688
    [134]: KB979899
    [135]: KB979910
    [136]: KB980182
    [137]: KB980195
    [138]: KB980218
    [139]: KB980232
    [140]: KB980248
    [141]: KB980302
    [142]: KB980436
    [143]: KB980842
    [144]: KB981322
    [145]: KB981332
    [146]: KB981793
    [147]: KB981852
    [148]: KB982132
    [149]: KB982214
    [150]: KB982519
    [151]: KB982664
    [152]: KB982666
    [153]: KB982799
    [154]: KB983589
    [155]: KB948465
    [156]: KB960568
    [157]: KB968930
    Network Card(s): 1 NIC(s) Installed.
    [01]: HP NC373i Multifunction Gigabit Server Adapter
    Connection Name: Local Area Connection 2
    DHCP Enabled: No
    IP address(es)
    [01]: x.x.x.x
    [02]: fe80::f494:43c2:7d90:e774
    Hyper-V Requirements: VM Monitor Mode Extensions: No
    Virtualization Enabled In Firmware: No
    Second Level Address Translation: No
    Data Execution Prevention Available: No
    Things I have tried:
    1. I tried to backup manually to external HDD using wsb snap-in, but it has failed in the same way.
    2. Stop and re-add protection.
    3. I have researched the error, some results suggest that some bad sectors might exist, however, when I run the command, it forces me to schedule the command on next boot. when I reboot, it loads windows after that gives a message "Cannot open the volume
    for direct access"
    How to end this loop? please help. Thanks for considering my question ...

    Hello Ebttikar,
    Please try clean boot then test how the issue goes. Following are the detailed steps about clean boot:
    Log on to the computer by using an account that has administrator rights.
    Click Start, type msconfig.exe in the Start Search box, and then press ENTER to start the System Configuration Utility.
    On the General tab, click Selective Startup, and then click to clear the Load startup items check box. (The Use Original Boot.ini check box is unavailable.)
    On the Services tab, click to select the Hide all Microsoft services check box, and then click Disable all.
    Click OK, Choose Don’t show this message again and then click Restart.
    Please check if RDP session issue is still the same.
    Please let me know the result.
    Best regards,
    Sophia Sun
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • 32-bit executable does not run in Windows Server 2008

    Hi,
    Sorry if this question has been asked already. I am having trouble finding a solution in the NI knowledge base and here in the forums.
    I just created a simple UI standalone application in Labwindows/CVI with UI. It runs perfectly in XP when it was developed. When I ported this over to the Windows Server 2000 target and tried to run it, it is stuck in a Windows console and will not spawn main(). I tried both rebuilding it on the 64-bit machine as well as just running the exe as is, yielding the same results. I also tried running corflags against the exe on both the 32-bit dev machine and the 64-bit target but both output says "The specified file does no thave a valid managed header", which seems to be true for all CVI exe files.
    Through some troubleshooting, I was able to narrow it down to a call to a function in a dll (that apparently has already been working all along). If I comment out the two calls, main() would start and life is good again. I tried visually looking through the code in the project producing the dll and things are fine.
    Can someone provide me with some insight into how to proceed on this? Was it a bad build? Did I not configure the build environment correctly (I already tried changing the stack/heap usage)? Could this be caused by a bug in the software that the compiler didn't catch? What typically causes a freeze in the console that spawns main()?
    Please help! Thanks in advance!
    EDIT: BTW, I'm running LabWindows/CVI 2009 on both machines.

    One other possibility is having sufficient rights, especially if you are invoking it via some other app, rather than manually as a logged in user. If you are not logged in and instead invoke it via a web site action, I believe you will have problems reading the registry, accessing a desktop, writing to disk, etc.
    Sorry I can't be more definitive, but perhaps it will help.
    Please post your conclusion, if you find it.
    --Ian

Maybe you are looking for

  • Please can I have my Noise Margin lowered *again*

    Message sent to StephanieG, who was very helpful last time. Please can I have my noise margin lowered back down to 6 again? Although it is plugged 24/7 into the test socket, it has crept up again over the last 6 weeks, until another disconnect 10 min

  • Stopping Audio in movie within movie..?

    hello, If I create a captivate movie called XYZ, (series of slides, and/or full motion capture) add narration to it, publish it to swf format, and then create a new captivate movie called ABC which uses that swf on one of it's slides (i.e. a movie wi

  • Create Mail account by AppleScript - Authentication problem

    Hi everyone, For two day, I try to create a new email account in Apple Mail by using Apple Script. Actually, my script works fine except for the declaration of SMTP informations. To my side, my SMTP server requires *authentication by password*. -----

  • Correction in cenvat on hold account, debit entry to be posted

    Dear Friends, During PGR, Correct entry is BED - Rs 25600+ CESS - Rs 512+ HCESS - Rs 256+ CENVAT ON HOLD - Rs 26368+ CENVAT CLG ACCOUNT - Rs 52736- But one document found with the following below mentioned entries  - BED - Rs 25600- CESS - Rs 512- HC

  • Problems with exporting iMovie to iDVD

    i want to export from iMovie 6.03 to iDVD 7.02. iDVD does´nt start. What is the Problem ? <Edited by Moderator>


HashFlare