Cache does not show all config items

SXI_CACHE is not showing all my config items.
When looking at SXI_CACHE, I noticed that only the config items pertaining to actual SAP services (Business Systems) seem to show up?? Is this normal? I've refreshed the cache (both delta, and full).
Also, when I double-click on Services, all the services show up, but the ones that are not actual SAP systems have an 'X' in the 'Flag' column ("Event has occurred") What does that mean?
Background:
We are in the prototype stage; I am the only one in the box. I created a simple File-BAPI scenario just to demonstrate that things worked. For the last couple months, the comm channel was set to Inactive. Attempted to reActivate the comm channel to get back in to it, and it's not working. I've double-checked everything I can think of, from the obvious (is there a file to be pulled), to the not-so-obvious (was the scenario changed by someone else in my absence).
Also, there are not sender agreements listed in SXI_CACHE?
Thanks in advance,
Brian

Actually, I wasn't using Business Service, I was using Business Systems from the SLD as Services without Party.
However, I just created a Business Service, filled in the Inbound and Outbound Interfaces, created Comm Channels, RD, ID, SA, RA, and activated all - still no luck. This time, some of the pieces DO show up in the cache. The ID, RA, and the Receiver CC show up in the cache, the RD, SA, and the Sender CC do not.
This has got to be a cache problem. We are using a VERY old and slow machine to run XI on. Each time I activate something in the DR or CD, I have to go to SXI_CACHE and Start Delta Refresh. I'm thinking there may be a timeout setting or something. What's frustrating is that it used to work just fine.
Any other cache related ideas?
***EDIT - just rechecked - getting messages from newly created Business Service, but they are failing in mapping....I guess I need to delete and recreate everything and try again. Maybe that will clear up the cache issue....
Message was edited by: Brian Vanderwiel

Similar Messages

IDM 8.1 with firefox does not show all GUI items

Hi,
we are running IDM 8.1 Patch_5 on Solaris 10. We have 2 instances, Prod & UAT. UAT runs from Tomcat 5, Prod uses Sun Appserver 8.
But our problem seems to be the Web Client.
When We lookup a user and then open the tabs for them, for example "Security" Firefox is not showing the
little boxes that allow you to allocate attributes etc. Instead, we just get the form title and then a blank line.
I did some reading and noted that there were some Java issues with IDM and Java and Firefox but I cannot apply
the workaround. I also tried the edit of Waveset.properties and adjusting the baseHref as suggested elsewhere but this
also does not work.
We are using Firefox Mozilla/5.0 (X11; U; SunOS sun4u; en-US; rv:1.9.2.6) Gecko/20100627 Firefox/3.6.6
As you can see this is a SPARC desktop!
Also Java was tried with v1.5_16 and now currently jdk1.6.0_07.
Can anyone please assist? This is rather urgent. I will be trying my Mac at home tonight, but we need something
that works now! Interestingly, this is the first time I have seen this problem. It may be related to Firefox, but I tried using Opera as well
with the same result.
Please assist!

Hi,
thanks for the information. I doubt we will be modifying the base code of IDM in this way. I am a bit disappointed that a
Sun product, running on a Sun desktop has this issue, but I think it more of a synergy between Java and Firefox, although
Opera was basically broken the same way, too.
Our workaround for now, is to have a separate install of Firefox, which is 3.0.3 and Java 1.5.0_16, which we know work
and run this as a parallel browser, with a symlink to it as "firefox-idm". This is OK, but not really that good.
Interestingly, IDM 8.1 displays perfectly on Snow Leopard and G5 Leopard using Firefox 3.6.6 and Java 1.6 on
Snow Leopard and with Java 1.5 on the G5 release.
We are thinking of apply IDM patches, but are reticent to do so, if they break any existing functionality......
Cheers
rachel
Edited by: virag064 on Aug 19, 2010 6:04 PM

Drop Down In List From Lookup Does Not show all items in mobile view

I have list called "incident".
I have a list called "locations"
The "incident" list looks up a value from the "location" list as a dropdown.
The location list contains 25 building names.
When I try to fill out the "incident" list in mobile view
the "location" drop down only shows 16 items. I checked the "locations" mobile view limit and set it to 99 to make sure all would show up.
The desktop view for the "incident" list shows all 25 buildings from the "locations" list.
Any advice on how to get those extra 7 locations to show up?
Jef

Still don't have an answer. I'm now looking to use a radio button or something to use as a work-around. If I use a lookup and tell it to allow multiple selections (shows as checkbox) it does not show all values in the mobile view.
If I input each item and choose choice, it only shows up as dropdown. I need radio buttons. If I choose lookup and allow multiple selections, it does not show all the options.
I need some help on this.
Jef

"ADF Navigation List" does not shows all items that are in table

Hi
Thank you for reading my post
I am tring to use "ADF Navigation List" , (it can be draged from data control platte into a form)
but when i drag and drop it on my form it does not shows all items that are available in my table ?
it just shows 10 item when i have 60 record in my Table.
Thanks

Hi,
in the pageDef ile, select the iterator for this list and set the fetch size to -1 (its 10 by default)
Frank

EMC Does Not Show All Databases Copies Information on DAG - Exchange 2010 SP2

Hi guys,
Really need your help here, suddenly my customer complain that they cant see any information on database copies on their Active Copy DAG Exchange server, for another DAG members, the database copies information is visible. After do some readings, I found
this related to Exchange 2010 SP1 known issue.
http://workinghardinit.wordpress.com/2010/09/13/emc-does-not-show-all-database-copies-after-upgrade-to-exchange-2010-sp1-still-investigating/
But, for my environment, there is Exchange 2010 SP2. I have no idea on this issue since there is no error log thrown out from the event viewer. I already try to restart the server itself and the Microsoft Information services but no luck.

Hi,
Based on the description, your customers could see passive database copy information, but they couldn’t view the detail information such as state: Healthy in EMC.
When did this issue begin?
Please restart the AD topology service to check result.
Since we have the information correctly on Exchange shell, please try to clear EMC cache and then open console to check if you can see database copy in EMC.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Belinda Ma
TechNet Community Support

Invoice recipient drop-down does not show all company codes

Hi SRM Gurus,
The user has three company codes assigned as attributes in the Org structure.
When creating a shopping cart, the company code drop-down shows the three company codes and the user is able to select one of them.
However, when creating an invoice, the user is able to see only one of the company codes in the drop-down (the last one in the list of three company codes in the org structure), therefore, does not have the option of changing the comp code. This is an issue - am not able to find any OSS notes to resolve the issue.
Any help is highly appreciated and will be suitably rewarded.
Thanks,
Sai

Still don't have an answer. I'm now looking to use a radio button or something to use as a work-around. If I use a lookup and tell it to allow multiple selections (shows as checkbox) it does not show all values in the mobile view.
If I input each item and choose choice, it only shows up as dropdown. I need radio buttons. If I choose lookup and allow multiple selections, it does not show all the options.
I need some help on this.
Jef

Transaction MD04 does not show all open sales/orders deliverys

Hi,
Transaction MD04 does not show all open deliverys and sales orders for plant 0705 and certain materials.
Can anyone tell me the reason for this?
Regards,
Brijesh

Hi
Run SDRQCR21 report in Transaction SE38 for that material it will resolve your issue.
Please confirm
Amit

Analysis does not show all rows returned by SQL

Hi.
OBIEE 11.1.1.7.0
I have a strange problem. I have a simple table that should return customer number and sales. The report will show all of the sales, but it does not show all the customer numbers. The SQL that OBIEE creates does return all of the customer numbers. When I remove the sales and just include the customer number, the report only shows a couple of the customer numbers (it should show several hundred).
I guess what I'm looking for is any advice for how to debug this. I have spent about 3 days on this problem, so I have tried to look at it from every angle (data, RPD, report).
Any suggestions are appreciated.
Thank you.

Thank you for your reply.
New development. The issue has to do with a descriptor ID column. The customer number column is a varchar field and I set the descriptor ID column to the column_ID field. When I remove the descriptor ID setting, I received all custom numbers.

I recently updated my e-mail address with apple, but now it does not show all the "purchased" music that I purchased under my old e-mail address. How can I re-gain access to those hundreds of purchased songs?

I recently updated my e-mail address with apple, but now it does not show all the "purchased" music that I purchased under my old e-mail address. How can I re-gain access to those hundreds of purchased songs?

You are trying to find a loophole to circumvent a basic rule that prohibits the transfer of purchased content from one Apple ID to another.
Content tied to an Apple ID are bound to that Apple ID forever. You can not merge or trade accounts. Well, not (officially) anyway...

My contact list does not show all my contacts.

My contact list does not show all my contacts. If I keypad a number not shown in the contacts it does know who that contact is. What can I do to show all contacts? I have 352 contacts in the phone.

Do you have different Groups for contacts? For example, perhaps you have some contacts stored on the device, some associated with a Yahoo account, and others associated with an Exchange account. If you have multiple groups like this, tap the "Groups" button at the top-left corner in Contacts and see if you're looking at only a subset of your contacts. There is an option to view "All Contacts", which summarizes them all for you.

Dmstool sometimes does not show all metrics

Platform: HP-UX B.11.11 U 9000/800
9iAS: 9.0.3.1
Sometimes dmstool does not show all metrics. there are different output generated by dmstool in different time. Who can explain why this occurs?
$ dmstool -t JVM
FLEXMON ERROR: Unknown type: JVM
prod1*J2SA02-/u02/app/oracle/product
$ dmstool -l -t
Host
Process
dms_cProcessInfo
modplsql
modplsql_Cache
modplsql_DatabaseConnectionPool
modplsql_HTTPResponseCodes
modplsql_LastNSQLError
modplsql_SQLErrorGroup
ohs_child
ohs_module
ohs_responses
ohs_server
ohs_virtualHost
opmn_oc4j_proc
opmn_ohs_proc
opmn_process
# but after 5 min:
$ dmstool -l -t
Host
JDBC_Connection
JDBC_Driver
JDBC_Statement
JVM
Process
dms_cProcessInfo
modplsql
modplsql_Cache
modplsql_DatabaseConnectionPool
modplsql_HTTPResponseCodes
modplsql_LastNSQLError
modplsql_SQLErrorGroup
oc4j_context
oc4j_ear
oc4j_jsp(threadsafe=true)
oc4j_jspExec
oc4j_opmn
oc4j_servlet
oc4j_task
oc4j_web_module
ohs_child
ohs_module
ohs_responses
ohs_server
ohs_virtualHost
opmn_oc4j_proc
opmn_ohs_proc
opmn_process

DMStool displays the DMS metrics of the system dynamically. DMS will not have the DMS metrics for the component, if the component is NOT up and running. In your first case, there was no OC4J JVM up and running. Therefore, there was no metric related to OC4J including JVM. To verify this, you could issue the following command:
dmstool -t opmn_process
dmstool would list DMS metrics of the processes started by OPMN. You would see there is no JVM process started.
In your second case, OC4J finally started. So you saw the metrics for OC4J JVMs.
DMS obtains process information from OPMN. It takes some time for OC4Js to start up and register themselves with OPMN. This is why you noticed the delay.
Hope this help.
Zhunquin Wang

Finder does not show all colors from selected color Labels

Since a view days finder does not show all Color Label colors. When I select either yellow or green it is selected, but it does not show in the file list with details, I can see it in icon and 3 pane view, but not in the detail list view.
does anybody know why or how? Or what plist files I might need to delete to get this reset?

Create a new account, name it "test" and see how your labels work in that User acct in list view? (That will tell if your problem is systemwide or limited to your User acct.) This account is just for test, do nothing further with it.
Open System Preferences >> Accounts >> "+" make it an admin account.
Let us know and we'll troubleshoot this further.
-mj
[email protected]

Photoshop Open dialog does not show all files

I've been noticing that unconsitantly the Photoshop Open dialog does not show all PSD files in a folder, some are just plain missing. In Finder they show up like normal though. Anyone else with this problem?

The open and save dialogs are provided and mostly run by the OS, not the application.
It sounds like you might have a filter set on your open dialog (like the search option).

Nokia E-5 music player does not show all songs. Th...

my Nokia E-5 music player does not show all songs. The filemanager does though. have tried every damn thing that i could, from the internet. no solution yet. Nokia wont address it. any solutions? please dont ask me to refersh my music player. nokia now manufactures stupid phones, instead of smartphones..
can any one help, friends? the last option i have to sell it off and wait for an HTC qwerty mango 7.5 phone

I perfectly understand that this is frustrating and of course Nokia should adress this.
I do not work for Nokia so maybe you could contact them. I see you have been to a care centre and reset it, but hopefully by contacting them by email they can log the issue for further work on firmwares?
I hope this sorts out. Have you btw, tried with some other memory card?
If it's not too much of a struggle, try backing up everything you have on it and format it, then reboot the phone which will recreate the needed folders and then drag and drop your stuff back to it and check again.
Hope you get it solved mate!

The library module in 4.3 version does not show all the images

The library module in the version 4.3 of Lightroom does not show all the images. They are marked with gray boxes instead of images. This is especially true of the images which I tried to import to Lightroom since I downloaded 4.3 a few weeks ago. If I want to seen an image, I have to go to the develop module to see it. What should I do? Get this fixed now!!!!!!!!

My bet would be on a corrupt preview folder.
Your preview folder is located in the same folder as your catalog. It has the same name as your catalog with the word Previews.LRDATA at the end of the name. Rename this folder and let Lightroom rebuild the previews. Go to Library>Previews>Render Standard-sized Previews. See if that fixes it.
If it doesn't, you may want to have a look here: http://helpx.adobe.com/lightroom/kb/photos-appear-black-gray-rectangles.html

Cache does not show all config items

Similar Messages

Maybe you are looking for