Cached credentials are not working on the lock screen (Windows 7)

Hello all,
We are having a difficult time trying to troubleshoot a problem with credential caching seemingly not working on the lock screen for our laptop users. Users are instructed to logon to the laptop while connected to the domain to cache their credentials. The
user then leaves the network, and is able to log in to the laptop using cached credentials. The laptop locks either due to a manual lock, or due to an inactivity timer. The user tries to relog and is presented with the error “no logon servers available to
service the request.” Users are reporting the problem from both home and public networks. We have been able to recreate the issue by logging on the laptop while in the office and setting our internal wireless network to manually connect, and then simply clicking
start > shutdown arrow > lock. Many users have reported that they were able to get back into the laptop after a hard shut down, but would be unable to log in again if they returned to the lock screen. One user has reported that selecting other credentials
> switch user > other user while on the lock screen and then entering in his DC credentials would allow him to get back into the laptop. I was unable to recreate this workaround on our test machine. I also tried to logon using the switch user account
with the “.\username” method to see if that would look for cached credentials. One user has reported that he was unable to hard shut down the computer to get back in. He also reported that he tried to pull the battery and give it time before trying again.
We have set the value for “Interactive logon: Number of previous logons to cache” to 50. The status of “Interactive Logon: Require Domain Controller to unlock workstation” is disabled. We have tried to turn the Wi-Fi switch off and then back on while on
the lock screen. Error logs that we think are related to the problem include – Event ID:5719, NETLOGON and Event ID:4343, NlaSvc error 0x4C6 and error 0x51
I have a slightly sinking feeling it has something to do with NLA thinking that they are connected to a domain while on the lock screen, but this is pure speculation. Thanks for reading my post and any potential solutions are greatly appreciated! 

I'd try them over here.
Windows IT Pro forums on TechNet
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Similar Messages

  • I've updated to iso5 on my iphone 4 but some of the features are not working like the lock screen camera feature.  Have I done something wrong?

    I've updated my iphone 4 to ISO 5.  I could not connect to icloud yet however does this expalin why some of the features of ISO 5 are not working like the camera lock screen feature?
    Thanks
    C

    to see the camera icon, double-click the home button when you are on the lock screen. this will show the music controls and the camera icon. double click the home bgutton again to close them.

  • IOS 5 - Notification are not showing in the lock screen knowing that the option view in lock screen is active ?

    Hi ,
    After Upgade my  iphone4 to ios 5 ,  Notifications are not showing in the lock screen knowing that the option view in lock screen is active ?
    Regards
    HM

    I experience this also sometimes (whatsapp), is this a bug??
    sometimes when a person writes 2-3 messages in a row (for instance) in whatsapp (im in standby mode), it sometimes only displayes ONE message in lock screen mode (though he/she wrote more than 1), and sometimes shows the right corresponding written messages!
    Why is this?
    its really annoyoing when you get messages in lock screen mode BUT it doesnt stay and remain so you notice it. That way you get missed messages etc and notices it first...when doing the "pull-down list".
    FIX THIS

  • HT5858 When I swipe up from the bottom of the screen to use control center I am not able to use the music controls for music or podcasts and music controls do not work on the lock screen either is anybody else having this problem???????

    When I swipe up from the bottom of the screen to use control center I am not able to use the music controls for music or podcasts and music controls do not work on the lock screen either is anybody else having this problem???????

    Not really sur easy you would be having that problem.  Mine works.  You might try RESET DEVICE
    Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost). Then try again and see if it makes a difference

  • The buttons on my ipad are not working. The touch screen is functioning but that is all. What can i do?

    Thanks

    hasi2,
    First your photos are not trapped in the iPhoto for iOS app. They can be seen in the Photo app.
    If you are getting a message that the app cannot download now then try again later.
    You might also try a reboot of your iPad. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the iPad restart. Then try to download the opiate again. See if that fixes your problem.
    Note: the iPhoto fr iOS download is large. When I downloaded the update it appeared that the progress bar wasn't oving. But after a LNG while it moved a very small amount. Some time later, after a lot of patience, the app completed the update process.

  • The MSS ECM FPM Steps are not working after the upgrade

    Hi all,
    The MSS ECM FPM Steps are not working after the upgrade. We use Java Webdynpro and MSS ECM (SP17), version 603.
    On cliking the FPM steps, nothing is happening, however we can navigate using the buttons.
    But this functionality was working before the upgrade.
    Please let me know what should I do.
    Thanks,
    Sarayoodharan.K

    clinet provided in the backend system was not correct during SSO certificate using tx-code strustsso2 -  Cleint should be 000

  • In PHotoshop CC, my blenidng options are not working at all.  A window comes up with the message "

    In PHotoshop CC, my blenidng options are not working at all.  A window comes up with the message "Could not complete your reequest because of a program error.  "
    Linda

    In Photoshop CC whenever I try to apply blending options to a layer, an error message comes up.. In my error message log, this is what comes up
      2013:07:12 16:17:16 : tracked key 0000000000000238 of type struct _ADsc * __ptr64 not found : 1 : REQUIRE failed 2013:07:12 16:17:16 : e:\ps13\ps_14_win_x64_daily_retail\20130423.r.221\photoshop\main\photoshop\interfaces\UTr ackResourceImp.h : 137 : REQUIRE failed 2013:07:18 19:20:19 : tracked key 0000000000000100 of type struct _ADsc * __ptr64 not found : 1 : REQUIRE failed 2013:07:18 19:20:19 : e:\ps13\ps_14_win_x64_daily_retail\20130423.r.221\photoshop\main\photoshop\interfaces\UTr ackResourceImp.h : 137 : REQUIRE failed 2013:09:05 22:42:22 : ..\..\sources\USheetRendererCommands.cpp : 556 : REQUIRE failed 2013:09:16 17:22:13 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:16 17:22:20 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:21 16:19:20 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:21 16:19:37 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:21 16:25:58 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:21 16:28:01 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:34:51 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:35:19 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:35:22 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:35:30 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:37:55 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:37:59 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:38:04 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:38:08 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:38:22 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:43:33 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 17:13:25 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 17:13:42 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 17:13:59 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 17:14:16 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:25 22:04:18 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 16:58:46 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:46:04 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:47:08 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:47:32 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:54:05 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:54:12 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:54:33 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:57:02 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 18:05:03 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 18:05:40 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 18:05:49 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 20:31:17 :
    ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 20:31:53 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed

  • The Keyboard clicks are not working despite the Keyboard click in settings are ON. Am using IOS 6.1.3.Pls Help me to rech this problem.

    The Keyboard clicks are not working despite the Keyboard click in settings are ON. Am using IOS 6.1.3.Pls Help me to rech this problem

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • Control center will not work in apps since 8.2 .Works on the lock screen and on my iPad.

    As I have already said above, the control center will not deploy in apps on my iPhone 6 since 8.2 It is turned on ,works on the lock screen and on my iPad. Any suggestions?

    Check the Settings app to make sure the correct Setting is there to allow showing the Control Center in apps.
    Settings > Control Center > Access Within Apps > ON

  • My "go to in point" and "go to out point" keyboard shortcuts are not working, and the default keys arnt either? any help would be amazing!

    my "go to in point" and "go to out point" keyboard shortcuts are not working, and the default keys aren't either? any help would be amazing!  I use these keys a million times a hour and since I have switched to cc I cant get them to work. track selection makes no difference or if there are markers on the timeline or not. 
    Anyone else feel me on this?
    any help?

    Well that still didn't make any kind of difference.  I would just do without it but I've becomes really use to it with Avid for so long.  I have to admit there are a lot of small moments like this that makes me miss Avid.  Any other suggestions? I have checked the keyboard shortcuts a few times and maybe I'm just missing something here...

  • TS1702 Certain apps on my iphone are not working since the IOS 6 update, all at tempts to resolve this issue have failed. Any suggestions

    Certain apps on my iphone are not working since the IOS 6 update, all at tempts to resolve this issue have failed. Has anyone got any suggestions. Thanks

    If you don't tell us what solutions you've already taken, we're probably going to waste a lot of time telling you to do things you've already done.

  • My back button does not work because the prior screen does not appear in the history.  I therefore must go back to the blue screen and reload safari.  Apple tech support could not help.  Can anyone else help?

    After I installed mountain lion my back button frequently does not work because the prior screen does not appear iunder History.  Apple tech support was not able to fix the problem.  Does anyone have any suggestions?

    lbryan1987 wrote:
    I dont want the button problem solved i need to know how to restore the phone without using that button or going into settings
    You don't in the condition it's in. You will either have to get the phone replaced by Apple or pay a 3rd party to repair it.
    there seriously should be more than two ways to solve this other wise apple is useless and we will never buy another apple product.
    Seriously? It's physically broken!

  • Text messages ringtones are not working in the Storm Two

    Device:  Storm Two running OS version 5.0.0.713 on the Verizon Wireless network.
    Recently, I upgraded from a Storm One to a Storm Two because of a multitude of issues with the Storm One; not enough memory, constant lock-ups; dropped calls, etc.  On the Storm One I had customer ringtones for contacts; so when a contact calls me the phone will sound a specific ringtone for that contact; the same for text messages from that contact. Now that I have the Storm Two the text message tones for the contacts are not working. In fact, even when I select a ringtone for text messages for a contact the phone will ring the generic ringtone that comes with the phone. If I go into the sound profile and change the generic ringtone to one of my own and the contact sends me a text/sms message the phone will ring the ringtone that I selected in the profile that is being used at the time. This is not the way it worked on the Storm One.  On the Storm One; if I have a specific ringtone for the contact and that contact sends me a text message it will sound the text messages tone for that contact. These ringtones have worked for previous devices including my Treo and Palm devices. The ringtone files worked well in the previous Storm One.
    So to make a long story short; I want to know why my text message ringtones are not working as designed/setup-up. If a contact calls me the phone will sound the ringtone for that contact; but if that same contact text me it will not ring the ringtone for the contact. This is annoying and I am at my wits end trying to find out why this is not working.
    Vernon

    Hi Jain....
    Field separator is for separating the fields.That means it will effect every field in the node.
    But end separator is not like that.It will apply at the end ofall fields of a node.It will effect node not a field.
    according to ur scenario if u use data.endseparator 'nl',output will come like this
    2008/0701$101
    2008/0701$102
    2008/0701$103
    2008/0702$105
    if u want new line for every field try to insert a separate node for second field.That means
    MT_DATATYPE:
    Data -
    1:UnBounded
    . .OrderDate----
    1:1
       <Data2>                   1:1
    . ....OrderNo -
    1:1
    now give data.endseparator  'nl'
                data2.endseparator 'nl'
    if possible try like this....
    Sreedhar Goud L

  • MY WHATSAPP HAUTELOOK FACEBOOK APPLICATIONS ARE NOT WORKING WITH THE NEW UPDATE iOS 7 ITS DRIVING ME CRAZY! HOW CAN I FIX IT?

    I DOWNLOADED THE NEW UPDATED VERSION FOR THE IPHONE !!!
    AND MY APPLICATIONS ARE NOT WORKING AT ALL
    WHENEVER I ENTER TO WHATSAPP A MESSAGE POPS UP FROM NOWHERE SAYING SOMETHING ABOOUT PUSH UP NOTIFICATION!!
    AND THAT I SHOULD CONNECT IT TO ITUNES, THEN I CONNECT IT TO ITUNES AND ITUNES IS NOT LETTING ME SIGN IN WITH MY APPLE ID ITUNES IS NOT WORKING/!!!
    ALSO WHENEVER I OPEN HAUTELOOK APP ON THE IPHONE IS FREEZING MY PHONE WITH THE PUSH UP NOTIFICATION WINDOW, AND I CLICK OK AND IT STILL APPEARS OVER AND OVER AGAIN
    PLZ HELP ME!!!!!!!!!!!!!!!!!!!!!

    If you do not have enough space, then you would have to free up more space.
    You can also update via itunes on your computer.

  • X-refs are not working in the PDF output

    I correctly generated a PDF from a ditamap using DITA-FMx and cross-references are not working.
    Thanks for your help.

    Thanks Scott, although I don't think this is the best solution in our case.
    The target PDF is a file that is delivered to a customer. This means that it won't keep the same location on the file system, and therefore links will no longer work I guess. In addition to that, we are still not ready for publishing our doc on the web. So the delivered PDF is a file that lives on its own.
    If the problem occurs only across different nested ditamaps, I thought I could get rid of these nested diatamaps and just have a global ditamap containing only topics. But then how would I obtain the different section levels in the TOC?
    Today, I use nested diatamaps in order to get the following structure:
    |_ Section 1
    |
    |_ Section 2
      |_ Section 2.a
      |_ Section 2.b
      |_ Section 2.c
    |
    |_ Section 3
    where Section 2 is a ditamap with three topics.
    Are there other alternatives to nested ditamaps in order to keep the same level of indentation?
    Thanks
    Arianna

Maybe you are looking for

  • EXE-Window don't disappear

    Hy, everybody. I've made an EXE from my Labview-application. It works fine, but after stopping this, the window stays on the desktop. I have to close this window by hand (Alt-F4, File-Close or so). Can i set some prarameters to force LabView make thi

  • Photoshop Elements 8 und eMail mit Outlook 2003

    Hallo, ich benutze seit langer Zeit MS Outlook (jetzt Version 2003) als Standardprogramm für eMails. Jetzt habe ich mir Abobe Photoshop Elements 8 zugelegt und möchte über dieses Programm und Outlook auch eMails versenden. Leider bekomme ich immer di

  • Edit in Photoshop without creating a copy

    Just wondering if I'm missing something? Can one edit a RAW file in Lightroom and then open in Photoshop without creating a copy before opening? I sometimes wish to open and manually save a copy from photoshop after I'm done editing. It seems there i

  • How can i hide CMD console when i invoke runtime in my application.

    I use the runtime.exec() in my application, but i do not want to show the CMD concole how can i do that? Please tell me ,thanks very much!

  • Proxy not found message now when it comes back on it has

    Proxy not found message now when it comes back on it has only the windows sign now when it comes back on but nothing else