Caching web templates using the portal cache - experiences

Hi,
To improve performance, I would like to cache a (7.0) web template in the portal. I adjusted the iView by changing the following fields:
Cache Level to shared
Cache Validity Period to 1 hour
However, the template still takes 10 seconds to load, the same time as before.
The template doesn't have a variable screen that is shown (all variables are optional), so according to note 1002778 'Caching in the Enterprise Portal' there doesn't seem te be a problem.
Do you have suggestions why it doesn't work, and if there steps I could perform to make it working?
Cheers,
Daniel

Hi,
Finally SAP OSS has answered me on portal caching in BI 7.0. From their reaction:
"In the new Portal infrastructure in NetWeaver 7.0 the iView properties
for iView portal caching are not evaluated by BI as it was in BW 3.5.
In 3.5 portal infrastructure this feature had special implementation
which was evaluated as not situable for the NW 7.0 infrastructure.
The iView properties are visible, even if they do not fit to BI
iViews as we do not have the possiblity to switch off this visibility
for some types of iViews.
Nevertheless, some parts like Web Templates, Web Items are stored
in the cache on Java Server and are reused when the same Template
is loaded again.
So in 7.0 we do not have functionality like in 3.x for storing of
the generrated HTML. As of my knowladge, there is no workaround for
that (besides what you have mentioned."
So we'll have to wait for the BO stuff, which has pretty good pre-calculations options which can serve as cache.
Kind regards,
Daniel

Similar Messages

  • About web templates inside the portal

    Hi !
    I need your help because I would like to do something and I can’t do it, even after reading a lot of documentation.
    I would like to display my lovely web templates (made with the Web Application Designer) inside the portal, through the BI > Bex Web Analyzer. But there, I can only open queries, views and infoproviders.
    Is there an easy way to display my web templates in the portal ?
    Thanks for your help,
    Best regards.

    Hi Cedric,
    The setting of web templates for BEX is available in BI.
    You can check IMG setting in the SPRO transaction, setting up the BEX templates.
    There you can define the tchnical name of the template.
    After the changes been done, remember to restart the ABAP stack.
    Regards,
    Prashil

  • Error when publishing web templates in the portal

    hi Gurus,
                  I am getting this error when I try to publish my web report on the portal,
    Field E_SX_META_DATA not a member of OUTPUT.
    Can anyone please let me know how to go about fixing this error ?
    Thanks in advance,
    Nip

    Hi,
    You mean you want to execute the template even after this design time error. If yes then you can simply go to the backend and Transaction "SE38" then in the next screen type "RS_TEMPLATE_MAINTAIN_70" and then in the next screen type your template name ans then press "Execute" button to see temlate in Java Web.
    Imran...

  • Can I run a 3.5 web template in the Portal

    I need to use the BW 3.5 Table Interface so that I can insert a character in a column.  The character I insert needs to be determined dynamically based on the data returned in the query.  In BI 7.0, the Table Interface functionality is obsolete.  Since I know I can do this in BW 3.5, I need to know if I can run a BW 3.5 web report in the Portal.
    Thanks.
    Ryan

    Yes you can run on it on a portal.
    https://forums.sdn.sap.com/click.jspa?searchID=11201037&messageID=1858837
    https://forums.sdn.sap.com/click.jspa?searchID=11201037&messageID=3199304
    Hope it Helps
    Chetan
    @CP..

  • Variants of web templates in the portal

    Hello,
    We launch our BI web templates via iViews in the portal. Some users
    have saved their personal variants in the portal, but after the version
    of the web template has changed, they do not access their variants any
    more.
    Are the variants in the portal linked to the version of the web
    template ? How is it possible to retrieve the variants ?
    Thank you in advance

    Danny,
    Logon to the BI system and go to transaction SE37 and execute RSBB_URL_PREFIX_GET to get the portnumber, try applying this and test your iview again.
    If this does not resolve the issue I suggest you to refer to SAP Note 937697 - Usage of SAP NetWeaver BI Diagnostics & Support Desk Tool, it is a pretty simple tool and helps in resolving most issues with regards to BI Portal integration.
    Cheers!
    Sandeep Tudumu

  • Is There A Way To Regenerate Web Templates In The WAD?

    I have changed certain web item parameters and saved the changes.  When I execute the template the saved changes are not reflected.  By that I mean the template reflects the changes but if I delete something like a container, I am receiving a dump with reference to the recently deleted container. 
    It appears to be that the changes made are not being updated and recognized immediatly from the time of the change to the execution of the template, almost as if a previous version is being called.
    Any assistance is greatly appreciated!
    Regards,
    Keith

    Keith : Did you try updating your Web templates using the ABAP RS_TEMPLATE_MAINTAIN*
    Use the RS_Template_maintain_70 for BI 7.0 Web templates and the RS_TEMPLATE_maintain for BW 3.5
    Also I find it much easier to maintain it here instead of WAD which takes up a lot of memory and dumps ocassionally.
    Hope that helps.
    Thanks,
    Krishna

  • Custom Web template for the "online link" UI command

    All
    We are trying to use a specific custom web template to allow personlization of reports within the Portal BI tool using the online link UI command.  After users have broadcasted their reports to their BIuserhome directory there is an online link UI command associated to the saved report. 
    Our one option would be to configure the web template as the default within the IMG.  But when we configured a default within the IMG, personalization of the report is not available with the context menu of the report.  We are broadcasting the reports to the BIuserhome directory.  Once the reports are saved users have the ability access the report using the online link UI command.  Since we lose personalization when we configure the IMG with a default web template, we want use a custom web template when we execute the online link UI command.
    Is there a way to pass a web template parameter when we execute the online link UI command?
    Thanks in advance.

    Sean McCormack has been doing a series here http://lightroom-news.com/ - seems to have stalled recently.
    Also look at the SDK - link above.
    John

  • CRM factsheet and BI 7.0 Web-Templates in Federated Portal Network Scenario

    Hi All,
    i have some essential questions regarding a Federated Portal Network Scenario.
    Our costumer works with 1 CRM-Portal (CRM 5.0, EP 7.0) and 1 BI-Portal (BI/EP 7.0).
    He decided to implement a Federated Portal Network, using the CRM-Portal as the Consumer-Portal.
    In the CRM-Portal we are working with the Business Package for SAP_CRM which also comprises Reports that are called from the BI.
    The BI-Reports (BI 7.0 Web Templates) are now stored in the BI-Portal
    How i can assign these BI-Reports (producer) into the factsheet of the CRM-Portal (consumer)?
    Is that generally possible that the facsheet of the Consumer Portal (CRM) works togehther with BI 7.0 Web Templates from the Producer-Portal (BI)?
    Best regards
    Mustafa Darwish

    It's been solved.
    See note: 1058268 - BI 7.0 WebTemplates do not run in CRM 5.0 specific iViews

  • Creating Web Services in the Portal

    Hi Experts,
    I'm trying to create a Web Service in the portal based on a URL. However I am having some issues with the User Management settings. I've explained below the steps I've followed in order to setup the Web Service and the issue I am having.
    I go to System Administration -> System Configuration -> System Landscape then I select my folder and right click. I then select New -> System (from template).
    I then select "Web Service System using WSDL URL" and insert the URL for my Web Service. The issue I am then having is that when I access the User Management page I can only choose "NONE" or "UIDPW" as the Logon Method. However, I need to choose SAPLOGONTICKET which should be one of the options but isn't.
    Does anyone know why this last option is not being displayed and how to fix this issue?
    Thank you,
    Kind Regards,
    Ale

    Hi Experts,
    I'm trying to create a Web Service in the portal based on a URL. However I am having some issues with the User Management settings. I've explained below the steps I've followed in order to setup the Web Service and the issue I am having.
    I go to System Administration -> System Configuration -> System Landscape then I select my folder and right click. I then select New -> System (from template).
    I then select "Web Service System using WSDL URL" and insert the URL for my Web Service. The issue I am then having is that when I access the User Management page I can only choose "NONE" or "UIDPW" as the Logon Method. However, I need to choose SAPLOGONTICKET which should be one of the options but isn't.
    Does anyone know why this last option is not being displayed and how to fix this issue?
    Thank you,
    Kind Regards,
    Ale

  • Create a custom web template using VS 2012 with web features,site features sections applied

    hi,
     Want to create a  custom web template using VS 2012  in my SP 2013 environment.  i know "Vesku" has posted a great artice on this [  based on prev. version of SP].
    here -
    http://blogs.msdn.com/b/vesku/archive/2010/10/14/sharepoint-2010-and-web-templates.aspx
    i am  looking for a code based article  which has step by step process which provides how to add the site features, web features and attach the eventreceivers etc etc on sitecollection creation when i apply this template from central admin. 
    can anyone provide me any links / any source how to create a custom web template with one / two  custom features -  site features element and web features element , / master page etc ....
    I am stuck with this. as part of my reqmnt, i need to create a webtemplate with all the customlistinstances, custompagelayouts, custom masterpages, custom appln pages, custom web parts.
    help is appreciated !
    Das

    The problem is that Web Templates are deployed to a gallery in a site collection and aren't available in Central Admin when creating a new site collection.  YOu have to create the site collection without choosing a template and then choose your web
    template when you first access the root site in the site collection.  Here's an article that discusses that process here:
    http://sharepointchick.com/archive/2011/02/10/using-web-templates-to-create-site-collections.aspx
    Other than that Vesa's article is still the best one and works essentially the same in 2013 as it does in 2010.
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • Search help for Web Dynpro using the SAP-search help

    Hi,
    I’m trying to create a generic search help for Web Dynpro using the SAP-search help. It should working so, that I construct a Web Dynpro-component, that gets the data of the search help from the SAP-system, interpreted it and creates the ui-elements and the needed context generic.
    The mapping between the Input field of the customerview and the right search help is to be made with an xml-file, which contains the information: name of the view, the input field, the search-help-name and the name of the field that will be returned.
    The xml-file is reading from a helper-class. That helper-class contains any information, witch need the search help-component as well as the customer-component.
    The initialization takes place in the method wdDoModify of the customer. The call of the search help from the customer should be implement with an Action, witch is bound to a Button(create dynamic in the helper-class behind the input field).
    In a second foot should be create a plugin for eclipse, witch insert the used files (search help component, helper class, …) in the project. In addition it should create the call in the customer generic.
    It would be great if someone can give me a feedback!

    Hi Mike,
    The BlanketAgreement.exe is a reference to the executable that will be created when you compile the solution you created in Part II - Part III. I think there is a mistake in the tutorial because it asks you to name the project 'Blanket' which means that by default the executable will be called Blanket.exe and not BlanketAgreement.exe. The tutorial also misses the step asking you to compile the Blanket project before you go on to create an installer. You should compile your Blanket project in Release mode before creating an installer. By compiling the project you'll get a Blanket.exe file in the bin folder of your Blanket project which you then need to add to the installer per the instructions.
    SAP do offer development courses in some areas and there is training material here on the SDN and on the SAP partner portal (and maybe the customer portal as well). Try searching this forum for 'training' or 'tutorial' and you should get a few links. There's also a development certification.
    Personally I'd recommend you give yourself a little project to work on and just get stuck in
    Kind Regards,
    Owen

  • Web Template - Using two Queries

    Hi Gurus,
    Can I use one web template, using two or more queries? And What web iten I need check for don't appear twice the variable ?
    Tks,
    Magani

    Hi,
    You can use one or more than one query in a web template.
    Keep in mind that you have a relation one to one betweeen Table (Web Item) with Query, if you want to include 5 query, you will nedd 5 Tables (Web items), and you have to configure in every sigle table the corresponding query that you want to browse.
    Regards
    Assigns points if useful

  • Create Web Service within the Portal

    Hi, all.
    I want to use SAP Portal for generating Portal web services on a base of some external procedures.
    But to use NWDS in such way as to implement this procedure in EJB and create a web service for it seems not the best solution for me.
    Are there any other ways to do it? For example, are there any utilities that can help me to generate a web service within the Portal?
    Regards, Sergey.

    Hi,
      Follow the steps given in the following link to create portal service.  
      <a href="mhtml:https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0b57e590-0201-0010-a29f-abd37a436f54!http://localhost/Documents%20and%20Settings/i024527/Desktop/Linda/start.htm">how to create portal service</a>
    Rds,
    Shanthakumar.
    Assign points for useful answers.

  • Publishing a site through UAG without using the Portal login

    Good Day -
     I'd like to ask if there is a way to publish access to an internal site through UAG without users having to use the Portal login - say by providing a link -

    Hello,
    The portal app is mandatory even if you not use it, indeed if you delete this app UAG stop to work as expected.
    In order to publish your internal site without going through the portal, in select application select the following options:
    Type: Web
    Web: Other Web Application (application specific hostname)
    With this you could bind a direct DNS name to your publication without using the portal in order to access to it.
    Regards,
    Follow me on Twitter http://www.twitter.com/liontux | My Blog (French/English) :
    http://security.sakuranohana.fr/

  • When I start the program I instantly see this message:  "Adobe Bridge encountered a problem and is unable to read the cache, please try purging the central cache in cache preferences to correct the situation".  I have tried this and it only results in a s

    When I start the program I instantly see this message:  "Adobe Bridge encountered a problem and is unable to read the cache, please try purging the central cache in cache preferences to correct the situation".  I have tried this and it only results in a stalled/locked program.  I have tried restarting my machine multiple times and tried reconfiguring how the cache is managed.  Do you have anyone who could walk me through each step to correct this problem which just started two days ago.  I have owned this program for at least a year now...

    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

Maybe you are looking for

  • 60 GB IPod Video WILL NO LONGER PLAY ANY PURCHASED MUSIC

    Yes, I updated to iTunes 7. Just noticed today that my iPod will not play any purchased music or music videos. It looks like it is about to play then returns to the previous screen. ANNOYING. Any ideas ?? Joseph

  • Mac crashing, can still use mouse

    Hi Guys, For the past week or so I've been having problems with my Mac Mini crashing, both on 10.8 and 10.9. Running a hardware test suggests the HDD/SATA cable may be dodgy, but I'm running an SSD so the error is likely due to this. What happens: On

  • How to populate the table using streaming data

    Dear folks M about to create a midlet application in which i need to populate my table with the current stock exchange values. Since these values get changed dynamically , I planned to use streaming. Since m new to streaming ,pls someone come up to g

  • Client Authentication via middle tier to database.

    Is it possible to pass through the Identity of the Real User to the database when using an Application Server that uses connection pooling to connect to the database. Note. The Application server is running EJBs that connect to the database using JDB

  • Classic Picture Viewer

    My camera creates image files that are, by default, PictureViewer files (i.e. ogle; jpgs and tifs) For convenience, before editing photos, I use Classic PictureViewer to view them to weed photos out. I just recently noticed that the OS X 10.3.9 combo