Cahnges Alternate Document type

Hi Friends,
I have maintained an alternate document type ZMMF in OR10 Sales Order. In Sales order it is showing both options i.e. ZMMF and OR10. But when I am going to change this, system is prompting an error as below:
Changes to sales document type are not possible (item category of item 000010)
Message no. V1847
Diagnosis
You cannot enter any values for the item category for item 000010. This means that you cannot change the sales document type.
Procedure
Change the sales document type back to the previous value.
I request you to pls help me in sorting out this issue.
Regards Krishan Raheja

Hi Krish. I'm having the same problem. What I investigated is that, for same reason I ignored, it is not possible to alternate documents with a configurable item category (VBAP-STRUM must be empty or 'E').
So if you have configure your system to work with sales order stock, it is not possible to alternate document using the standard system.
I've checked some notes and I couldn't find the reason nor the solution.
Hope will be useful for future references.

Similar Messages

Alternate document type for MRP requisition

Our purchase scenario is that all MRP purchased items must have an approved contract to move to a purchase order. In 95% of the cases, this will be true, but there will be that 5% that, due to expiration of the contract or quantity/value exceeded, a valid, approved contract will not be available. However, the purchase must still proceed.
Our thought is to create an alternate requisition type that the buyer could change the MRP requisition document to. This new document type would then be subject to requisition release strategy.
However, using an MRP generated requisition (creation indicator B), the document does not allow change of the document type. The new document type is a complete copy of the NB document type used in MRP proposal planning, including the number range. The only difference is that the new document type is subject to requisition release.
Changing the document type at the MRP group level won't solve the problem as very few materials will actually require this change. It would be temporary until the existing contract could be extended and approved or a new one created and approved. Also, it seems that the MRP group setting affects only the purchase order and not the requisition.
Is there a way for us to make this process work more smoothly than to have to copy the items from the NB document type to the alternate document type manually?

Assuming you have a material master involved, why not try MRP Group in TCode OMDT. You can assign the group to the material and that group can determine the PR type that is created.
MRP:doc.type purchase requisitions for standard purchase ord
    Identifier allowing a distinction to be made between various kinds of
    purchase requisitions in the SAP system.
    By means of the document type you can, for instance, differentiate
    between a standard purchase requisition and a requisition relating to a
    stock transport order, although both documents belong to the purchasing
    document category "purchase requisition".
Use
    Among other things, the document type controls number assignment and the
    selection of
Regards

Changing PO document type for automatic purchase order opened by GR

Hi to all,
You know, there is a feature to customize automatic PO creation upon GR. The system uses "NB- Standart Purchase Order" document type. But, i need to use a different document type (like ZNB) that i have copied from standart one.
How can I change default document type for PO in customizing. Or, am I able to do that in customizing.
Thanks,
Hakan.

Goto OLME --> Define default value for document type
here for T-code MB01 - cahnge to your doc type
Read that documentation for more info

Based on document type , editable schedule qty in me22n, me52n

Dear Gurus,
based on document type , the schedule qty field under delivery schedule tab to be editable, at present it is in greyed out mode, is there any config settings are dev if so whatever please share with more details

Hi,
   As of my knowledge, the change mode screen layout cant be defined based on document type. You can make the field as editable or non editable in the field selection key AKTV (for both PR and PO).
   An alternate method is explained in the KBA: 2048405 - How to control the field layout
   If you still want to make the field selection based on document type in ME22N / ME52N, then you may go for development.
Regards,
AKPT

Changing PO Document type layout programatically

Hii,
My requirement is to change the PO Document type layout programetically. We have customized the standard PO Print report and for that we have created one customized style sheet. We have done the same for 4 types of document types : standard, Contract etc. Now while moving our code into another instance we need to set out custom stylesheet template to the corresponding Document type. Any one have any idea how can we do that from backend? We don't want to update the standard tables as Oracle does not support it.
This is very urgent.
Appreciate your help.
Thanks.

Goto OLME --> Define default value for document type
here for T-code MB01 - cahnge to your doc type
Read that documentation for more info

Sales Forms: Document Type

Hi all,
I am trying to set a search define up that works on all sales forms, rather than create an alternate one for each form. I know I can get access to generic sections of the form using the following:
$[$4.0.0]
Which I know can get me the BP code for example, but I wish to extract the document type from the form, does anyone know if this is possible? or what number I would be after?
I know that $[$1.0.0] is the add/update button for example, the few numbers I have tried haven't yielded the correct results....
Is the a guide or list that contains these references??
All help is much appreciated.
Kind Regards
Matthew

Hi,
Thanks for your response, unfortunately I don't think I discribed what I am after too well...
I am trying to write a query the will work on all sales forms but access UDF information rather then create six different queries to do the same thing. So what I am after is adding a form, then checking a forms type ie. Sales order/delivery note and then responding by grabbing the correct UDF, unless there is a way of accessing UDF's other then like this $[ODLN.UDFNAME] as this will get it for a delivery note but not a sales order.
I need something like:
SELECT CASE FORMTYPE WHEN 'SO' THEN $[ORDR.UDF] WHEN 'DN' THEN $[ODLN.UDF] ELSE '' END FROM $[$FORMTYPE]
I know you can get the information from a saved form as thats recorded in the database as ObjType, i.e Sales Order is 17, Delivery Note is 15. But my interest is a form creation level not from saved data...I would like to know if there is a way to get this from the form itself...
Unless of course there is another you can get $[ODLN.UDFNAME] without specifying the form name...
I'd prefer a way of doing this mainly from the maintanence of query side in case we wanted/needed to alter the query - its easier to alter 1, than 6 etc..
Kind Regards
Matthew

Use of alternate cal.type '7'

Hi Friends,
What is alternate calculation type ' 7' used for ? Could anybody tell me with an example ?
Regards
Mahesh

Hai Mahesh,
Alternative caltype is used in pricing prcodure when u assigned contiontypes in PP, As all of us Knew.
req--007 (Domestic Business)
This requirement is met if the departure country is identical to the destination country. This requirement can be assigned to a condition type in the pricing procedure or an access level in an access sequence that is only relevant for domestic sales or purchases.
Within a sales or purchasing document, the tax can be calculated in the pricing procedure using a condition type. In many cases, taxes may be calculated differently based on whether the transaction is a domestic transaction or an import / export transaction.
<b>Using an access sequence, the user can define different ways to access tax information for the document item. The user would assign pricing requirement '7' to those accesses which are only relevant for domestic transactions</b>.
Pricing requirement '8' can be used to indicate an export / import transaction.
*Hope it hleps U to understand.

What are the sources system will pick the document type while creating invo

hi
I would like to know how system will pickup the doucment type while creating invoice in vf01.
i have taken off the fields f1, f2, from the document type. in billing sub tab. so The moment when am creating billing system automatically displaying F2 invoice doucment creation. What are the sources for this.
thanks & Regards
Rack129

Hi,
Hope you have maintained u2018Delivery relevant billing type F2u2019 and u2018Order relevant billing type F1u2019 in the billing tab of the Sales document type in VOV8.
If you create delivery related billing, the system will pick F2. This is controlled in Item category (VOV7). Billing relevance in Business data of Item category decides whether this is delivery related or order related. u2018Au2019 for delivery related billing; u2018Bu2019 for order related billing and so on.
Item category is determined by this combination: Sales document type + Item cat group + usage + higher level item cat.
Regards,
K Bharathi

CREATION OF NEW DOCUMENT TYPE

Dear cons
We want to create a new document type for pur. requisition.In this document type account assignment will be 'P'(PROJECT) . w.b.s should be only enter.
so pl. give the details of filling data in the required field step by step. waiting for your early response.
thanks
nirupama

Hi,
In order to create a document type for a purchase requisition use the path
spro-materials management - purchasing--purchase requisitions --define document type
in that screen you select the document type you want to copy to create your document type and perform the action.
if you want to change the screen/field selection for your document type select the field selection key (if you select the document type as NBB the field selection key will be NBB.,and go to the screen and change the field status.
Hope this will be suffient for your requirement.
Regards,
Raghu.

Wrong document type is processed form ME59N - Automatic PO creation Efected

Dear Friends,
Im facing one issue while the PO is created from Purchase requistion(ME59N).
If the purchase requisition document type is - XTB while creation of PO from ME59N the document type is taking as UB
the SPRO setting has been done for supplying plant and receving pant as - XTB but still getting the error as
Doc. type XTBshould be used for suppl. plant XXXX and receiving plant XXXX. 06 - 674 ( Msg class and No)
Could any one please help me on this.
The manual PO creation(ME21N) is perfect .
Regards
Kumar.

Hi Mauro,
Thank you for the very helpful answer, i suggested my team to impliment the OSS note.
Thanks for your help.
One similar kind of issue i am facing, i implimented one enhancement in the BADI "ME_PROCESS_PO_CUST" for checking the supplying plant.
When i processd it through ME21N ( manulaly) it's taking the right plant, But when i processed it through ME59 ( Autoamtion of PO) the Enhancement is not triggered.
ME59N is not supporting as there is no support pack ( OSS notes need to be implimented).
Coluld you please provide any helpful answer for me
Thanks for your support and Help.
Regards
Ravi.

PO Document Type for Free Goods only

Good day,
Business Scenario: Client wants to track FreeGoods made. To solve this, we have created PO document type "Free Goods PO"
Current: I choose Free Goods PO, input materials and then tick the FG indicator.
Question: Is it possible that for this document type, every material I put, the indicator is automatically ticked? And that only free goods can be placed in this document type?
Thank you,
Simon

Simon,
You will need someone with a developer key to be able to implement the code. However, in the main PO processing program SAP has created spots where customers can add custom code for situations like this.
If you go to transaction SE81, you can select the MM module. From there click the "Select subtree +/-" button (will highlight MM in yellow). After that click "Information System". This will bring you to the developer workbench where you can review all of the enhancement spots and user exits in the MM module.
If you expand Enhancements, and click on Enhancement Spots, a selection screen should appear to the right. In enhancement spot enter 'es_saplmepo' and execute. Double click on the enhancement spot. That will produce the list of all of the enhancement points within that main program. There are ones specific to the header fields as well as item fields.
If you scroll down to "item_process_main_01" and double click it will bring you into the code where the above if statement can be added (for some reason it doesn't bring be right to the item_process_main_01 spot so i have to scroll to find it).
As the program is running it will hit your enhancement and process that as it is going. A developer can provide more details.
Hope this helps,
Matt

Quantity field not getting displayed for all document types

Hi,
I have made a configuration to include field Quantity(BSEG-MENGE) in the GL account line item display.When I ran the report for stock adjustment account(FAGLL03), only the following document types are showing quantity against them.
WI- Inventory document
WA-Goods Issue
WE---Not showing quantity against (WE- Goods Receipt)
Can any one please explain. I have seen the original document from FI document. The original document as well as FI document carries quantity.
Thanks
Aravind

Hi Aravind,
Check SAP notes 1063198 and 1117587.
FAGLL03 display quantity which is updated in FAGLFLEXA, BSEG is not
relevant in this case. This is clearly explained in the note 1063198.
The quantity posts through to FI on the 'goods receipt' items, but not on the
'invoice receipt' items.
In the FI normally the Quantity is not a 'real' important field, as it
is more related to the MM area.
But in the old 'Profit Center Accounting' and the old' Special Ledger'
the field has been important.
As the same logic of these areas to 'store' the Quantity is also used
in the NewG/L the field get only filled in the line, where it make
'sense' from our point of view, because only in the 'goods receipt'
lines a 'real' Quantity is posted to the system.
So as before in the PCA and SL, now also in the NewG/L the Quantity is
filled in the correct and important lines and postings.
In the BSEG ('old document segment table') the field is filled 'just'
as it is send to the FI, but this is not completely correct from the
business point of view.
This can also lead to issues with the reporting and summation to this
field. So with creating the new logic in the NewG/L the 'correct'
standard of the 'writing' for the Quantity has also been taken over.
So in the end, the update and display is correct according SAP standard behavior.
Actually,Quantities within G/L are never reliable,
because the purpose of FI is a view on the data according to amount
but not according to quantity.
In the FI normally the Quantity is not a 'real' important field, as it
is more related to the MM area.
I hope I could be of assistance.
Regards,
Fernando

Document type KR is not picking to Clear GL account with T-code F-03

Hi all,
My client wants to clear GL account Cash-in-Transit which is open item managed. He has posted two items. One is with KR document type like Intercompnay adjustment account debit (40) and Cash-in-Transit account credit (50). Second item is with SA document type like Cash-in-Transit accont debit (40) and Intercompany adjustment account credit (50). He did not give vendor number and appropriate posting key (31) while postings. With document type KR, he posted with posting keys 40 and 50. Now while clearing the GL account through T-code F-03, system is picking only SA document type. The system is not picking document type KR. He wants to clear the items with each other. I have checked the document type settings. Check boxes Intercompany postings and trading partner are active in both above document types.
How can the GL account be cleared ? Are any configuration settings missing ? Kindly advice as soon as possible.
Thanks in advance.
Regards,
K.S.K

Hi,
First of all..why would system need a Exchange gain/Loss Account..If your local currency is INR and you posted a debit and a credit document both in INR..then there is no question of a foreign exchange gain/loss account..
BUT, if you have posted the document in any currency other than INR, ie: your local currency...then the system would need a exchnage gain/loss account when you try to clear the debits and credits.. i am giving an example below to explain better..
You posted a debit of 100 USD @ 40 = Rs. 4000.00
You posted a Credit of 100 USD @ 42 = Rs. 4200.00
Now, if you clear this debit and credit then there is no difference in 100 USD, as the debit and credit is netting off.. but if you see INR there is a difference of Rs. 200.00 which system posts to Exchange gain/loss account..which we maintain in OB09.
Hope it is clear to you now..
Regards,
SAPFICO.

Billing due list problem with customized document types

Dear Team,
We have created a new Rental contract and Rental Invoice document types by copying the standard ones (MV & FV), while trying to get the Billing due list, unable to get the Rental Invoice type, rather the system is proposing the standard Invoice type (i have already changed the Billing type to the customized one in sales document type).
Can you please let me know the pre-requisites for the billing due list.
Regards
Sreedhar

Hi,
Thank you for your response. But, i was not able to implement those oss notes as the current highest support package we are currently using is SAPKB70208, Software component - SAP-BASIS.
Kindly let me know if you have more inputs.
Regards,
Vinitha

Reg:Document Type creation in Manual bank Statement.

HI all,
What is the document type for Manual bank statement reconsolation.
I created (BZ )for Manual bank statement reconsolation which fields i have to select.
regards
JK

Hi,
Document types are created at client level. to restrict one kind transactions only and to identify the transactions pertaining to what.
At the time of configuring BRS we have to specify the document type there u can specify what ever you want before it has to create. go to OBA7
Hope this is clear, if yes assign points
Regards,
Sankar

Cahnges Alternate Document type

Similar Messages

Maybe you are looking for