Calculated key figures in manual planning

I'm trying to set up a Material Planning system using BPS.
One of the requirements my customer wants is that in the manual planning he can both modify a multiplier as well as one of the resulting amount key figures.
The multiplier is used to calculate the consensus amount based on a consolidated amount.
In my manual planning I have the possibility to allow input on the multiplier as well as the consensus forecast (that has been calculated upfront). Now I need the consensus forecast to change when th multiplier is changed.
How can I best tackle this? (Yes, I'm fairly junior to BPS...)
Thanks for any guidance in this matter.
Regards,
Eric

Hi Eric,
to give business the most flexible solution, allow them to manually change the multiplier or the result and provide two planning functions (FOX). One for calculating the result from the multiplier, and one for the reverse. Then the user can choose which direction they want to go.
Regards,
Marc
SAP NetWeaver RIG

Similar Messages

How To Add New Key Figure in Manual Planning

Dear All
Please Help
I Already implement BPS for 2 year.
Now user want to add new key figure in Cube.
I already add new key figure to cube and activated it.
But in Manual Planning, The new key figure not show in selection
what I must do?
Please Help.
Thanks

Hi,
not all key figure types are supported in BPS.
1. All key figure types must have aggregation SUM, SUM.
2. Supported key figure types:
- amout
- quantity
- number (integer, float, dec)
- time, only type DEC
- datum, only type DEC
All other key figures are filtered out and are not available in BPS.
Regards,
Gregor

Problem in Calculated Key Figure in BEx 7.0

Hi All,
In Bex 7.0
We have a requirement where we need to display a key figure which is having unit price of an Article. In our InfoProvider we have Article, Store and Date and the report is based on Article. As we have to display only the latest price we have created a RKF by putting a restrcition of the latest date in the date range on the the unit price key figure. But still unit price is getting aggregated over stores.
For example if there are 10 stores and the unit price of an article is 5, then data displayed is 50 and not 5.
We tried to create a Calculated Key Figure using the above RKF and an exception aggregation Average of all detailed value that are not zero, null or error on reference characteristic 0PLANT. Its working fine when the query is restricted to one or two Articles. But for all the articles it gives the following error messages.
1. Error while reading data; navigation is possible.
2. Error occurred during parallel processing of query 17; RC3
3. Error executing physical plan: AttributeEngine: no 6952
4. Error reading the data of infoprovider ZXMSC01$X
5. Amount of data that is to be read from the BIA server is too large
6. The following error 6952 occurred in BIA server
7. Error executing physical plan: AttributeEngine: not enough memory;BwPopMerge pop1(setIsLastMerge(1)),in executor::Executor in cube: p03_zxmsc01
Can anyone tell me the solution for the above error. Or if there is a workaround to our requirement.
Regards,
Sachin

Hi,
Could be a memory issue.
One of your cube in on BIA which is causing the Problem.
So executing the query in RSRT by selecting Do not use BIA index option.
If the query is executed with out any issue then take the cube out of BIA and push it back.
Hope it helps.
Regards,
Raghu
P.S : Also please let us know if this query is live and it is an issue that you are facing after executing it properly for few days.
Or this is a new query created and testing now and in the process got this error?
Edited by: Raghu tej harish reddy on Sep 24, 2009 5:53 AM

Currency Translation for Calculated Key figures

Hello Friends I want to use the Currency Translation for Calculated Key figures.
But when I go to Query and go to conversion tab it is always greyed out. Does that mean we can set the fixed conversion type for calculated key figures. like ZSAD Total debit - credit -flow value.
What is the way to do fixed currency translation in query for calculated key figures.
All the below is done now just want to specify this in query but I can'nt since it is greyed out.
All the below is done
I have created a Currency Translation Type " FiscperConversion" "ZVHGR" now this has Exchange Rate Type from Variable "ZVARN" (Which is a variable single value manual input on 0RTYPE Infoobject for exchange rate.)
2. Now Currency Tab: Target Currency is selected from Variable placed in the Report. ZRPVAR.
3. Now the Variable Time Reference is used. Standard Infoobject 0FISCPER
which is beginning of period.

Hi soniya
Your calculated KF is result of some calculation ...so system will not allow u to do any translation on it...to get CT on CKF you should do it on base key figure...still if you wish to do then you can create a formula variable having processing type a customer exit...write code in cmod to rad exchange rate and multiply ur CKF by this formula variable....
Thanks
Tripple k

Calculated Key Figures in IP FOX

Hi,
I would like to modify the calculated key figures using custom Formula planning fuction (FOX). Can some one let me know how to change these calculated key figures from BEx.
I have found a thread discussing the same topic.
Business Planning
So do we have to definitely create a key figure in real time cube to be able to change the values in BEx calculated key figure.
this is only for simulation purpose based on some key figure values and not for storing values in the cube.
Regards
Bhav

Hi,
If I understood correctly, you are asking why we have that "planning" tab in the properties of Calc KFs also? I think its just that the properties tab for all KFs is the same (no special customizing for any kind of KF), but it obviously doesn't make sense to set planning properties for calc KFs.

Restricted/Calculated Key Figures in Query vs MDX?

Hello All,
We are embarking on our first project utilizing SAP BW as the Data Warehouse and Web Intelligence as the presentation tool.
We plan on creating the universes on BW Queries.
What are the pros and cons of using Restricted and Calculated Key Figures in the query versus creating them in the Universe? Also from a performance impact point of view if there is any?
Best Regards,
Dan Krieg

Hi Dan,
I would suppose that there is no big influence on performance. If the calculation for the calculated key figures are very complex I would propose to calculate them on query level. So its easier to use them also in other environments.
Please take into consideration that OLAP universes are not supported in Crystal Reports. More information you find in the thread [OLAP universes and Crystal Reports|OLAP universes and Crystal Reports;.
Regards,
Sebastian

Calculated Key figures using different key figures

Hi All,
I want to create a calculated key figure based on Actual and Plan.Actual values are coming from InfoCube,Plan values are loaded from Excel sheet into different key figure in another infocube.I've created a MultiProvider for these Cubes.Now I want to find the difference between plan and actual.So I created a calculated keyfigures based on the key figures.But the Query is giving error ..
Then the connection terminated..
Let me know how to do..
Raji

What is the error you are getting?
First do this.
In the query, filter on only 1 infoprovider. Check the KF's and see if correct and if you get the error. Then, do the same thing, for the other infoproviders. Once you get no errors that way. Remove the filter. See if the KF's are ok and no errors. Then do your calculation.
Also, make sure in the definition of the KF's, you are filtering each on the right infoprovider. (For instance, KF1 has a filter on infoprovider1 and KF2 has a filter on infoprovider2.)
hope this helps!
/smw

ELSEIF in calculated key figure

Dear gurus
We have recently upgraded to NW2004s, and would need some help on the formula for my calculated key figure. This calculated key figure is meant to replicate IF... ELSEIF statement, depending on what the user enters. The logic that we have are as below :
IF Var=1, then display key figure A
ELSEIF Var=2, then display key figure B
ELSEIF Var=3, then display key figure C
ELSEIF Var=4, then display key figure D
where Var is a Formula Variable, Processing By User Entry/Default value.
The formula that we have originally, in BW3.5 is :
<i>(Var == 1) * 'Amount in TC' + (Var== 2) * 'Amount in Comp Code' + (Var == 3) * 'Amount in Parall USD' + (Var == 4) * 'Amount in Hard Cur' </i>
This formula has served us well in BW 3.1 to BW 3.5, and never had any problems with it. However, when we migrated over to BW 7.0, we could not get values for this formula (eventhough we have data in our cubes). The only data that get is when we key in Var=1, but when we try with Var=2, 3 or 4, no data is displayed in our key figure.
We tried to debug, but somehow we could not figure out how the new BW7.0 calculates these type of key figures, and whether is there a change in the formula variable. We believe that the problem may lie in the way that BW 7.0 interprets the formula above, and only obtains the first portion of the formula (Var==1).
We would appreciate any helps, and of course, points will be awarded if problem can be solved.
Thanks a lot

Dear all
With some luck in searching, I manage to find an OSS note which depicts this error and resolve it. For those who have the same problem, please use this OSS Note 994194.
Cheers

Using Characteristic in Calculated key figure

Hello every one,
I need a help. Can anyone help me in solving one requirement.
I want to know if i can use a Characteristic in calculated key figure.
Thanks in advance.

Hi,
You can try to create a formula variable of type replacement path and supply this char to pull the value from. Evaluate this value as a boolean (1 or 0 for if there is a value or not). Then you can create a new formula using this formula variable and your CKF. If the result is 1, then you get the value of the CKF, or if the indicator returns 0, then you get 0 as the result.
Hope this helps...

IF Condition in Calculated Key Figure .

Hi,
can anyone can tell the syntax for using "If Statement in Calculated key figure ".

Hi,
If amt1 ne amt2.
select amt1.
endif.
Try the following for above condition :
Create a formula varible.
1) select 'amt1'.
2) Go to boolean, select 'is not equal to'.
3) select 'amt2'.
4) select '*'.
5) select 'amt1'.
its looks like
'amt1'<>'amt2'*'amt1'
hope this helps..
regards,
raju

Currency translation problem for calculated key figure

Hi All
I have a problem with the currency translation for a calculated key figure.
I have a requirement to show the MM consignment stock value in the specified currency from the selection screen.
For consignment stock, there is no value maintained in the system. So for this we need to calculate the value as below
Restricted key figure: RKFConsignment stock: Total stock with special stock indicator restriction "K"
Calculated keyfigure: Consignment stock value = Nodim( RKFConsignment stock) * (Standard cost / price unit).
Here, in the calculated keyfigure properties --> I have used a currency translation for the 0CALMONTH.
The query has selection on the 0calmonth.
But in the result the I am getting unexpected results.
Do we have any inconsistencies in the currency translation on the formulas?
Please help me on this.
Regards
S.R

Hi All
I have noticed something. I changed my query date selection to Calendar day - Keydate instead of calendar month.
And I have changed the currency variable to fixed exchange rate "CHF", it is working fine.
I think I have some problem with the currency translation variable.
Could anyone of you please send me the currency translation variable for Calendar month with the below parameters
exch rate type : M
Time reference : 0CALMONTH
End of month
Target currency for a variable : < var created on 0currency>
For my report, i need calendar month selection, currency selection.
Please help me with your ideas.
Thank you
Regards
S.R

Currency Translation on Calculated Key Figure in BW7.0

I am trying to use a currency translation in BW7.0 on a calculated key figure. Unfortunately the options for this are greyed out in the conversions tab for the calculated key figure.
I took a simple example. I have a KF that is revenue. I put this KF in the query and I can specify the conversion for it.
I then took the same KF and put it as the only argument for a CKF. For this CKF whether it is local to the query or a global CKF, I cannot specify a currency conversion.
If I do the same experiment in the 3.5 design tool, I am able to specify the currency translation.
Is there some system setting that enables it in the 7.0 query designer?
Thanks.
KB

Hi,
Have a look at the links:
http://help.sap.com/saphelp_nw70/helpdata/en/80/1a682de07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/f1/0a5529e09411d2acb90000e829fbfe/frameset.htm
Best Regards,
Rajani

Using the function SUM() in a calculated Key Figure

Hi All,
I need to create a calculated Key Figure and am looking for the function SUM().Can you please let me know where this is present.I have checked under the "Data Functions" and it does not seem to be present there.
Thanks
Aravind Pattabiraman

Hi,
Make use of aggragation property of the keyfigure, for summing the values of that KF.
Regards,
Rajkandula

Can one call a function module in Calculated Key Figure?

Can one call a function module in Calculated Key Figure? If yes how, if not, what is the solution if formula does not suffice?
I want to convert duration which is in seconds to Duration in Hours and Minutes. There is a function module for doing it. Not sure how to do it in a formula.

One option you have is a Virtual Key Figure and User Exit to use the Function Module to convert the time from seconds to HH:MM. Here are two documents on this subject to help you create them, based on the technology your comfortable with:
[Implementing Virtual Key Figure/ Characteristics Makes Query More Dynamic|https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e051fda8-71a9-2a10-ac9e-8d17414a8c8c&overridelayout=true]
[Step By Step Process for Virtual Key Figures and Characteristics through BAdi|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/60e34f63-f44c-2c10-488e-c89b04e0ca7c&overridelayout=true]

Adding new key figures to DP planning area

I am using APO DP.
When adding new key figures to a planning area, is there any way of avoiding having to deinitialise and then re initialise the planning area?
Thanks for any advice on this...

First of, let us know which version of DP are you using.
If you are using 7.0, all you need to do is right click on your planning area and select Change Keyfigure setting and you should be able to update the key figures there.
The below is from SAP help for SAP APO 7.0, you should be able to add the key figure without deinitializing the planning area.
Key Figure Settings
Here you can change the properties of the key figures of a planning area, if the planning area has already been initialized. You can also add or delete key figures. However, you can only delete key figures that are no longer used in planning books, data views, macros, or demand forecasts. You can find out in which objects a specific key figure is used with the where-used list.

Calculated key figures in manual planning

Similar Messages

Maybe you are looking for