Calculation of goods issue date in sales order with routes

Hello Gurus,
This is my first post on SCN, I'm excited to share a new little problem I have.
I have configured my routes determination as per our requirements. For example, I have one route configured in 0VTC such that the transit duration is 1 hour.
When I create a sales order, I enter that route (1 hour transit.dur) under shipping on the line item. Then I set a delivery date sometime in the future to test out my config. Looking at the shipping "Goods Issue Date", I see that the date is 2 hours earlier than my delivery date. It's supposed to be 1 hour.
I looked through many forums and found no help on this. My factory calendar is configured such that all days, including weekends and holidays are production days.
Please advise at your earliest.
Thanks,
Mido

Hi TW Typewriter,
Yes, I am changing the date in the "schedule lines" tab for the sales order to a date next week, say May 23, 2014. When I click on the display "Shipping" info, I see:
1) Delivery date: 05/23/2014 - 00:00
2) GI Date: 05/22/2014 - 22:00:00
The expectation is to have the GI date 23:00:00 since my config for the route on the sales order is for 1 hr of transit time only.
See attached

Similar Messages

Calculation of goods issue date in scheduling agreements with routes

Hello together,
i have a problem with the calculation of goods issue date in scheduling agreements when we use route, because the system ignore the days of transit.
Example:
We had customized the route 4711 with a transit time of 3 days. This route would be related to a scheduling agreement. But this setting has no influence to the calculation of the goods issue date for the schedules. The same happens with loading date and so on.
Can anyone give me a tip, which setting is additional necessary?
Regards
Andreas Walter

Hi,
check the following settings
1, Route determination Path : IMG>sales and distribution>Basic function>Routes>Route determination
2, Activate the route Determination for your sales document type in following path :IMG>sales and distribution>Basic function>Routes>Route Schedule Determination-->Schedule with route schedule for sales document type
3, Maintain Delivery scheduling and transportation scheduling in the following path:IMG>sales and distribution>Basic function>Delivery scheduling and transportation scheduling>Maintain Duration
Regards
Senya

How to fetch post goods issue date and sales order creation date

Hi All,
How to find out the difference between SD Sales Order Item Creation Date and final Post goods issue Date. I would like to know how to fetch those dates and what is the relationship between the tables from which i will get the dates.
Please let me know the solution .
Thanks in advance.

Hi,
Sales order creation date is when u raise a sales order in favor of the customer using VA01.......using ATP logic system purposes the material availability date....
after saving ur sales order...when u raise the Delivery using VL01n w.r.t to OR...than u have to perform picking ....In the picking Tab...specify the amount to be picked than press Post Good Issue....means the goods left the company premises ..
You can the fetch the values using tables- Use T code SE12 or SE16
Vbak-----order header
Vbap-----order item
Vbek-----order schedule line
Likp-----Delivery header
Lips----Delivery item

Issue when creating sales order with Sold-to/Ship-to Party's state

Hi All,
we have issue while creating Sales Order with picking up of State tax
for Ship-to-party & Sold-to-party.
<b>When we create a sales order, for the sold to party 140052732 and
ship to party 140052733 it is picking state tax. Which should not
suppose to pick? Because the partner is marked as tax exemption</b>.
Can any body tell me how can we solve this issue!
Why this is happening!
How to make not to pick tax when it is marked for tax exemtion.
As i am not Functional guy i am not aware what is happening here!
Can anybody solve this issue!
Thanks in advance.
Thanks,
Deep.

Hi Deep
What do you mean by "It is picking up state tax"? Does it mean that in the pricing procedure it is picking up a condition type which is meant for state tax?
If so go and check the condition record meant for it. Follow the following steps
1) Go to Sales order
2) Select the line item for which the state tax is being picked.
3) In the condition tab select analysis.
4) In Analysis you shall find the condition type meant for state tax.
5) See which condition record has been found.
6) Go to VK12, enter the state tax condition type and check the condition record for that state tax.
7) If wrong correct it.
8) If anything else come back to the post and inform the details
Thanks
Regards
Sunil

Issue when creating sales order with Sold-to/Ship-to Party's state tax

Hi All,
we have issue while creating Sales Order with picking up of State tax
for Ship-to-party & Sold-to-party.
<b>When we create a sales order, for the sold to party 140052732 and
ship to party 140052733 it is picking state tax. Which should not
suppose to pick? Because the partner is marked as tax exemption</b>.
Can any body tell me how can we solve this issue!
Why this is happening!
How to make not to pick tax when it is marked for tax exemtion.
As i am not Functional guy i am not aware what is happening here!
Can anybody solve this issue!
Thanks in advance.
Thanks,
Deep.

Hi Deep
What do you mean by "It is picking up state tax"? Does it mean that in the pricing procedure it is picking up a condition type which is meant for state tax?
If so go and check the condition record meant for it. Follow the following steps
1) Go to Sales order
2) Select the line item for which the state tax is being picked.
3) In the condition tab select analysis.
4) In Analysis you shall find the condition type meant for state tax.
5) See which condition record has been found.
6) Go to VK12, enter the state tax condition type and check the condition record for that state tax.
7) If wrong correct it.
8) If anything else come back to the post and inform the details
Thanks
Regards
Sunil

G/L Account is missing in item data in sales order with reference to quotation

Dear SAP Guru,
I have a problem in accordance with G/L Account missing sales order. Initially, please find the below lines.
1. If I do the sales order without reference to quotation there is no error in G/L Account missing.
2. If I do the sales order with reference to quotation there is an error that G/L account is missing in item data.
I have checked the VKOA, the settings are fine.
Kindly anyone of you resolve this issue.
Warm Regards
Vidya Sagar

G/L account is missing in item data.
Many times, it has been discussed on this issue in SCN and please search with the same text so that you will find many threads asking various areas to check. Take the inputs from there and post here still if you have issue.
G. Lakshmipathi

Issue in creating sales order with ref contract(quantity)

hi friends,
I am creating sales order with reference contract using
"BAPI_SALESORDER_CREATEFROMDAT1"
my issue is with quantity field when i am entering quantity as 1 then it is taking as 0.001
i am also declaring its unit field too but there is no change.
in my program i am taking quantity as parameter.
field description is like this Order qty in sales units - 00009001 corresponds to 9.001
is there any chance of changing the quantity .
please help.

There is another similar post...look at those comments. Consider the data types in use...in true numeric fields with decimals, the decimal is implied, so look at how you're sending and/or converting any value.... For instance, if I were sending data to a quantity field described as curr 15, decimals 3, I would expect that I needed to send 1.000 (or perhaps 1000, depending on my testing) in the input to get a quantity of 1.

Mass change of LOADING DATE on Sales orders

Hi
Does anyone know how we can MASS CHANGE the LOADING DATES on SALES ORDERS with MANY LINE ITEMS - ALL WITH Different DELIVERY DATES
So basically we are wanting to over-ride the loading dates which SAP suggests - which relates to the ROUTE
I am aware that you can use EDIT > Fast change > delivery date - but this would put all of the delivery dates then to be the same
Your help would be much appreciated, as the Operatives are doing this line by line, order by order at the moment
Many thanks
Tony

Dear Tony,
Won't You able to change the same Via LSMW (or through BDC-Program)?
Just check whether the T. Code: MASS, could be useful
Best Reagrds,
Amit

Sales order with MRP run but no need of sales order stock while PGI

Dear Gurus,
We have scenario in company that we want to run MRP for sales order & generate requirements. But while doing post goods issue for same sales order, sales order stock need not be present.
Please tell which planning strategy, strategy group or else should be used here.
Thanks in Advance !!
Thanks,
Vishwas

Hi,
Please configure in the following manner..
create a strategy group say Z9..in this maintain main strategy as 20 and alternate strategy as 10... Now assign this strategy group to material in material master in MRP3 View..
Now create sales order say A and run MRP with MD50..after completion of production you will get Sales order stock.. now convert this sales order stock unrestricted use stock..
Now before you are doing PGI for sales order A... go to sales order change VA02 and change the requirement type to KSL from KE and then system will all you to do PGI with unrestricted use stock...
Thanks
Kumar

One sales order with two bill to party at the document header

Hello to all
We have the following issue: create one sales order with two bill to party and only one payer. The reason is that the materials are paid with the same customer(only one account document) but we need to print two invoices one by each bill to party and each invoice printed with its own invoice number)
We are thinking in one development due to the key users won´t create different line items or create different sales order.
The process will be the following:
1-Create the sales order with one payer and two bill to party or a new bussiness partner(you can use only one bill to party in each customer)
2-Invoice the sales order. The system will create only one account document because there is only one payer but the system will create two printed documents with the invoice.
So if someone had the same requeriments, any help will be appreciated.
Thanks in advance.

Pablo,
You intend to create one invoice (one payer) but 2 different document print layouts.
That should work. But, you have stated 'printed with its own invoice number'.... does this mean you need 2 distinct document numbers in the system? That will not be possible.
An alterantive is to create a Proforma invoice and a regular invoice and send it to the 2 parties involved.
Ashutosh

Billing date(fkdat) in sales order item is not copied from Goods Issue Date

Hi All
we are facing problem at item level billing date field.This field should be filled with the GI Date in schedule lines shipping tab.
but, it(billing date) is not being filled with goods issue date but, with the required deliver date at sales order header.
Please give me a solution and the root cause. This is urgent as business is halted.
Thanks
Kumar

Lakshmipati
This is from SAP Screen
"If invoice dates are defined for the customer, the system proposes the billing date from the invoice date calendar. If no invoice dates are agreed, then the actual goods issue date is formed on the basis of delivery related billing. In order related billing, the billing date of the order forms the basis of the billing date."
earlier it is happening as desired.i.e., billing date=GI Date.
but, as of now it is taken from the required delivery date.
Please give me solution
Kumar

Goods issue dates are different in sales order & delivery

Hi,
We have a situation where in sales order schedule line tab goods issue date is 21.30.2011
but in delivery the planned GI date is 28.03.2011.
There are two line item in the sales order & in both the line items all the dates are same.
Same route is there in sales order & delivery.
In delivery Item category avalability check Off is Y(Do not check avail. when reporting results of pick.request)
All the dates(delivery,loading,Transportation planning) are different .
waiting for responce.
Thanks In advence
Susrikant

goods issue date is 21.30.2011
What was the Actual GI date in delivery?? This should be the same as schedule line date.
thanks
G. Lakshmipathi

Good Issue date in the Sales order should 1 day difference from the MBDAT

For the particular customer, i want to have difference of 1 day in between the material availability date & good issue date in the schedule line. As per standard i can't made any changes in route and shipping point. Suppose material availability date in sales order is 22.09.2010 than my good issue date should be 23.09.2010 in the sales order. Any body having any idea how can we handle this case and what are things we need consider impact of this change.
Regards,
Srinivas.

Hi,
I think you can easily enable this in Route scheduling /Delivery scheduling. You have to maintain the load time and pick/pack time as the total of 8hours. If this is done, then after material availability date, one more day will be added and the final day will be considered as GI date.
If you dont want to do this, you only have to enable this by Z by using a user exit where you can add one day to the MBDAT and update that in GI date.

Calculation of dates in Sales order in gATP

Hi
Can anybody please tell me how scheduling works for the following dates in sales orders for materials planned in gATP.
1) Unloading date 2) Delivery date 3) Goods issue date 4) Loading date 5) Material availability date 6) Transportation planning
My understanding is that gATP gives the MAD date and other remaining dates like transportation planning date, unload date etc are calculated using master data in the calling system eg ECC.
We are facing an issue in our system where if a material is planned in ECC, it has all dates in the sales order calculated as expected based on ECC master data.
If the same material is planned in gATP, it simply copies the MAD date to all other dates. So it is not considering the pick/pack , transportationplanning times from the ECC master data.
Is this standard system behaviour and to avoid this Do we need to activate Scheduling in gATP along with master data maintenence in APO ?or any user exit plus execution steps is avaialble to by pass APO master data mentaince.
Appreciate your responses...Regards - Amit

Amit,
We are facing an issue in our system where if a material is planned in ECC, it has all dates in the sales order calculated as expected based on ECC master data.
If the same material is planned in gATP, it simply copies the MAD date to all other dates.
The system where the parts are planned is irrelevant. The important issue is the system where the ATP is conducted.
My understanding is that gATP gives the MAD date and other remaining dates like transportation planning date, unload date etc are calculated using master data in the calling system e.g. ECC.
I have never seen that statement validated in any SAP documentation.
From online help:
SAP R/3 uses the order type to determine whether shipment scheduling or transportation scheduling should be executed.
If scheduling is activated, SAP R/3 determines a plant for the material for each item. If it is specified in the integration model that the availability check should take place in SAP APO for a material in this plant, transportation and shipment scheduling also takes place in SAP APO.
Standard SAP APO GATP supplies three different methods for shipment scheduling. If you are conducting ATP in APO, and you have not configured one of the three scheduling methods, then shipment scheduling does not take place, and the system will react as you have described.
Read up on it here
http://help.sap.com/saphelp_scm70/helpdata/EN/05/f8923945b12c4de10000000a114084/frameset.htm
Best Regards,
DB49

Purchase order delivery shedule tabl , no Good issue date, loading date.?

Hi Experts
We found some Purchase order, in po item, it is without goods issue date, loading date and so on.
Material has set ATP check on mrp3. what's possbile wrong? something wrong for matieral setup or others?
Thanks
Alice

Hi
Really thanks for your help. You mentioned " SD delivery of the sending plant is created and processed."
Do you mean in material master , the sales view -delivery plant will impact this po GI date and Loading date? It maybe something wrong?
Thanks
Alice

Calculation of goods issue date in sales order with routes

Similar Messages

Maybe you are looking for