Calendar assignment in OAVH for '03' period control for calendar year dependent fiscal year.

Hi
We have a year dependent Fiscal Year in our client's system. It is a 5-4-4 Fiscal Year variant starting from March till Feb.
While trying to create a new asset we faced an error "You cannot save this asset(Correct depreciation error)." I checked and found that the error is due to a missing calendar assignment in OAVH for the period control key '03' (Pro rata at mid-period) for our fiscal year variant. Till the last fiscal year it had been maintained, but for current fiscal year the assignment is not maintained.
Can someone help me to understand how the calendar assignment is done in OAVH for a 03 period control key for a year dependent fiscal year like ours?
I tried using the transaction OA84 (Generate Period Control), but it provides the calendar assignment for all other period control methods except for '03'. Is there some specific reason as to why OA84 does not generate for '03' period control?
I checked the last fiscal year's assignments in OAVH for our fiscal year variant for '03' period control, but could not understand how it was configured, because it did not relate to the fiscal year variant assignment that we have done in OB29. Also, I even checked whether we need to enter the mid date of the periods, but that also was not done for the last fiscal year. I am unable to understand how the dates have been assgined.
Given below is our last Fiscal Year's OAVH settings for '03' period control:
FYV
Period Cont
Description
Year
Month
Day
Period
AG
3
Pro rata at mid-period
2014
3
17
0
AG
3
Pro rata at mid-period
2014
4
18
1
AG
3
Pro rata at mid-period
2014
5
16
2
AG
3
Pro rata at mid-period
2014
6
16
3
AG
3
Pro rata at mid-period
2014
7
18
4
AG
3
Pro rata at mid-period
2014
8
15
5
AG
3
Pro rata at mid-period
2014
9
15
6
AG
3
Pro rata at mid-period
2014
10
17
7
AG
3
Pro rata at mid-period
2014
11
14
8
AG
3
Pro rata at mid-period
2014
12
15
9
AG
3
Pro rata at mid-period
2014
12
31
10
AG
3
Pro rata at mid-period
2015
2
13
11
AG
3
Pro rata at mid-period
2015
2
28
12
Please advice.
Thanks in Advance.
Regards
Ambarish

Dear Ambarish,
As it is a year dependent fiscal year variant, we should create the year for the variant via OB29, then generate the period via OA84.
Best regards.
Beam

Similar Messages

  • Mid Month Calculation for Year dependent fiscal year

    Hi All,
    We are in middle of AA implementation .How can we configure mid month in year dependent fiscal year .System doesn't allow to put mid month date for year dependent fiscal year.
    If we copy co.code from best practice co.code BP01 system updates date this table in back round.
    But we are not copying from BP01.
    Any one has configure this for year dependent please input.
    Thanks,

    Hi,
    this function is not possible, you have to use a fiscal year variant with 24 real periods instead.
    Check the IMG documentation concerning "Use of Half Months in the Company Code":
    - When you specify the use of half periods in the definition of an asset company code, half periods are automatically specified in all other company codes that use this fiscal year version.
    - You cannot use half periods with non-calendar fiscal months.
    - You cannot take back the use of half periods once the specification has been made.  It is noted internally by the system in the asset master records.
    Regards,
    Markus

  • FI-AA Impact on changing the year dependent fiscal year period from 445 to 435

    Dear Friends,
    May I have your comment on the impact of below change
    Currently using Year Dependent fiscal year variant K5 and period end closing is *445
    future we want to use the same fiscal year dependent variant K5 , however the period end closing will be *435
    *445 Periods - 1st month 4th sat, 2nd month 4th sat, 3rd month 5th sat will be the closing periods
      similarly for the rest of the months in a year
    *435 Periods -  1st month 4th month, 2nd month 3rd sat, 3rd month 5th sat will be the closing periods
      similarly for the rest of the months in a year
    Impact on Asset Module and other  modules will be a great help
    Regards
    SB

    Hi Sanjai,
    SAP do not recommend to change a Fiscal Year Variant that has already
    been assigned to a company code and has already some postings. This
    will may create database inconsistencies
    Please check the following SAP notes which will give you an
    idea of some adverse effects that may happen as a result of a change
    based on the modules/components you have implemented in your system.
    427920     Analysis program for fiscal year conversion
    210861     Changing fiscal year variant in production system
    193713     SAPF070: Change of fiscal year variant
    672255     Shortened fiscal year/changing fiscal periods
    The change of the fiscal year or the change of the fiscal periods
    has an effect in many modules, for example, in FI, FI-AA, FI-SL, FI-LC,
    EC-CS, IM, CO, EC-PCA, MM, PP, SD, PS, PM.
    Corresponding risks (for example, data inconsistency, system standstill)
    can arise from incorrect changes to the fiscal year or from incorrect
    changes to the fiscal periods in a live SAP system.
    You can refer to the following wiki page also:
    http://wiki.sdn.sap.com/wiki/x/jYXrCw
    I hope you find this information helpful.
    Regards,
    Jose

  • FI Impact on changing the year dependent fiscal year period from 445 to 435

    Dear Friends,
    May I have your comments on the impact of below change
    Currently using year dependent fiscal year variant K5 and Period closing is *445
    Future we want to use the same year dependent fiscal year variant K5 and period end closing is *435
    *445 Periods - 1st month 4th sat, 2nd month 4th sat, 3rd month 5th sat will be the closing periods
      similarly for the rest of the months in a year.
    *435 Periods - 1st month 4th sat, 2nd month 3rd sat,  3rd month 5th sat will be the closing periods.
      similarly for the rest of the months in a year.
    Impact from FI perspective and other modules would be of great help
    Regards,
    SB

    Hi Sanjai,
    SAP do not recommend to change a Fiscal Year Variant that has already
    been assigned to a company code and has already some postings. This
    will may create database inconsistencies
    Please check the following SAP notes which will give you an
    idea of some adverse effects that may happen as a result of a change
    based on the modules/components you have implemented in your system.
    427920     Analysis program for fiscal year conversion
    210861     Changing fiscal year variant in production system
    193713     SAPF070: Change of fiscal year variant
    672255     Shortened fiscal year/changing fiscal periods
    The change of the fiscal year or the change of the fiscal periods
    has an effect in many modules, for example, in FI, FI-AA, FI-SL, FI-LC,
    EC-CS, IM, CO, EC-PCA, MM, PP, SD, PS, PM.
    Corresponding risks (for example, data inconsistency, system standstill)
    can arise from incorrect changes to the fiscal year or from incorrect
    changes to the fiscal periods in a live SAP system.
    You can refer to the following wiki page also:
    http://wiki.sdn.sap.com/wiki/x/jYXrCw
    I hope you find this information helpful.
    Regards,
    Jose

  • Impact on changing the year dependent fiscal year period from 445 to 435

    Dear Friends,
    May I have your comments on the impact of below change
    Currently using Year Dependent fiscal year variant K5 and period end closing is *445
    Future we want to use the same year dependent fiscal year variant K5, however the period end closing will be *435.
    *445 Periods - 1st month 4th sat, 2nd Month 4th Sat & 3rd Month 5th sat will be the closing periods
    similarily for the rest of the months in a year.
    *435 Periods - 1st month 4th sat, 2nd Month 3rd sat & 3rd Month 5th sat will be the closing periods
    similarly for the rest of the months in a year.
    Regards,
    SB

    Hi Sanjai,
    SAP do not recommend to change a Fiscal Year Variant that has already
    been assigned to a company code and has already some postings. This
    will may create database inconsistencies
    Please check the following SAP notes which will give you an
    idea of some adverse effects that may happen as a result of a change
    based on the modules/components you have implemented in your system.
    427920     Analysis program for fiscal year conversion
    210861     Changing fiscal year variant in production system
    193713     SAPF070: Change of fiscal year variant
    672255     Shortened fiscal year/changing fiscal periods
    The change of the fiscal year or the change of the fiscal periods
    has an effect in many modules, for example, in FI, FI-AA, FI-SL, FI-LC,
    EC-CS, IM, CO, EC-PCA, MM, PP, SD, PS, PM.
    Corresponding risks (for example, data inconsistency, system standstill)
    can arise from incorrect changes to the fiscal year or from incorrect
    changes to the fiscal periods in a live SAP system.
    You can refer to the following wiki page also:
    http://wiki.sdn.sap.com/wiki/x/jYXrCw
    I hope you find this information helpful.
    Regards,
    Jose

  • TS1741 what is battery number for the remote control for apple TV

    What is the battery number for the remote control for apple TV

    Hello,
    should be CV2032 or BR2032.
    Hope that helps.
    Cheers

  • FM for month and year to Fiscal year period

    Hello ABAP Experts,
    Please suggest a FM to convert month+year to fiscal year period.
    Suggestions appreciated.
    Thanks in advance,
    BWer

    use the function moduleGM_GET_FISCAL_YEAR
    pass date and fiscal year variant as 24..
    see all the values of the fiscal year variant in the table T009
    Check with fm FI_PERIOD_DETERMINE
    Thanks
    Seshu

  • Should we really go for bean data controls for a new project?

    Hi,
    I am still new data controls and trying to figure out the advantages of using bean data controls for our new project. Our UI is going to have customized UI components and our back end is going to be a tcp/ip server.
    Is it a good idea to develop java beans and then create data controls to bind to UI layer? I think it makes sense to use data controls if we want to use existing java beans. Maybe we would be separating the model layer by using data controls, but only thing it would be doing for us would be the simple object calls to my java beans. Would it be better to use data controls or use I choose to make object calls?
    Thanks,
    Manoj

    Hi,
    the POJO data control will always give you a benefit and develope productivity, unless what you have to build fits on a single page - in which case you may not mind the burdon of manual UI component binding
    Frank

  • CRVS2010 beta - ReportSource Property for new Viewer-Control for WPF

    Hello,
    I use the new Crystal Reports for Visual Studio 2010 Beta. There is a new Viewer-Control for WPF.
    But I don't know, where to specify the ReportSource.
    Thanks
    Peter
    Added the info into the subject line for this beta
    Edited by: Don Williams on Jun 30, 2010 8:21 AM

    Hi,
    O.K., in this way I can set the ReportSource Property, but if I use the load-method, the compiler don't "know" about the properties of the specific report.
    The code
    For Each crReportObject In rd.Section4.ReportObjects
    brings the message
    Fehler     16     "Section4" ist kein Member von "CrystalDecisions.CrystalReports.Engine.ReportDocument".     C:\VS2010\...     484     40     WpfBudget
    An other problem is, that "C:\Users\aTai\Documents\Visual Studio 2010\Projects\CrystalReportWpfApplication1\CrystalReportWpfApplication1\CrystalReport1.rpt" don't exist on an user computer.
    Thanks
    Peter

  • Looking for a remote control for powerpoint on ipad2

    Using DocumentstoGO on the ipad2, looking for a method to progress powerpoint slide shows

    For sharing between iPads, this might be worth a look:
    http://www.ideaflight.com/
    Cisco has a WebX application for the iPad that says it allows scheduling, hosting, and attending meetings. There is a client for GoToMeeting for iPad, but I believe that you can only attend, not host.
    Regards.

  • I am looking for the volume control for skype /iPad ? Can anyone help please?

    I am stumped.
    I can hear people on my iPad skype but they can't hear me.
    They say to turn up the volume on the volume control on the menu bar ?? I can't see any menu bar.
    They say check the Audio Settings ?? Where ?? Ohhhhh I am so sad!
    Can anyone help this old digger ? Please.

    Is the iPad connected to the internet?
    If so, and it's still not working just restore the iPad.
    Note: Take a picture with your iPhone, wait 5 mins then check photo stream on your iPad and see if it appears.

  • Period Change for a single month

    Hi All
    We are currently on a year dependant fiscal year - 4,4,5 FY variant..
    However, for the month of september - the period 9 closes on the 26th but they want to extend ONLY that period till the 30th of September..
    Since we are still in July - would that change be ok to perform or not? Would it cause any issues in our system..?
    Thank you
    Rukshana

    It will not have any negative impact technically to change the future period in a fiscal year dependent variant.
    Regards,
    Gaurav

  • Customer exit code for fiscalyear period based on system date

    Hi Experts,
    Please provide customer exit code for fiscalyear period derive based sy-datum. Fiscal year period derivie current to previous 12 periods and current to fast 12 periods.
    Thanks,
    Subbaraju

    Hi Subbaraju,
    Please use below customer exit code for your solution. Please define declarations as per requirement.
    When 'ZFPERIOD'.
    IF I_STEP = 2.
    ztoday = sy-datum.
    zfast = sy-datum + 365.
    CALL FUNCTION 'DATE_TO_PERIOD_CONVERT'
      EXPORTING
        i_date               =  ztoday
        i_periv              = 'K4'
    IMPORTING
       E_BUPER              = PERIOD2
       E_GJAHR              = YEAR2.
    CONCATENATE YEAR2 PERIOD2 INTO FISCPERLOW.
    CALL FUNCTION 'DATE_TO_PERIOD_CONVERT'
      EXPORTING
        i_date               =  zfast
        i_periv              = 'K4'
    IMPORTING
       E_BUPER              = PERIOD2
       E_GJAHR              = YEAR2.
    CONCATENATE YEAR2 PERIOD2 INTO FISCPERHI.
    L_S_RANGE-LOW = FISCPERLOW.
    L_S_RANGE-HIGH = FISCPERHI.
    L_S_RANGE-SIGN = 'I'.
    L_S_RANGE-OPT = 'BT'.
    APPEND L_S_RANGE TO E_T_RANGE.
    ENDIF.
    Similar code user for your previous periods also.
    Thanks,
    Chandra

  • Fiscal year "A3" Variant is not maintained for Financila year 2010

    Hello All,
    while creating asset master using AS01 T Code i am getting an error "Fiscal year "A3" Variant is not maintained for Financila year 2010 for Compnay Code 0600".
    but i have configured Fical year variant and assigned to co code, i am able to post the transactions for all the periods i.e financial year 2010.
    here my question is whether we need to maintain the Fiscal year variant separately for Asset accounting in ECC 6.0.
    Please Suggest
    Thanks
    Shankar

    Hi Murali and Christian,
    Thanks for your reply..
    now i have configured year dependent fiscal year to my co code, if i configure calender year i am able to create the Asset master
    please help
    Thanks
    Shankar

  • Issue with Period Control 03 for Depri key MSTL with 6446

    Hi Gurus,
    We want to use mid-month calculation for Dep. key MSTL using period control 03 (i.e. 03/03/03/03). We are also using 6446 as year-depedent Fiscal year (i.e. Jan and Dec 6 weeks other rest 4 weeks).  period control 03 is pro rata at mid period
    period 12 for 2009 start 11/14/09 ends 12/25/09
    period 1 for 2010 start   12/26/09 ends 02/05/10
    as per period control 03 mid month is Dec-04-2009 (setup in OAVH)
    When i acquire an asset on Dec-04-09, the dep start date is Nov-14-09 which is correct and all calculation is correct
    however when i acquire an asset on Dec-06-09 the dep start date is still Nov-14-09 which is not correct infact it should start dep from next month which will be Dec-26-09 (This is 1st period of Fiscal year 2010)
    As mentioned above we are using 6-4-4-6 fiscal year
    When acquiring an asset with mid month concept at year end we are facing problem in depri start date and hence calculation.
    The setting in OAVH for period control 03 are as below
    FV   Period Control     Desc.                             Year   Month   Day    Period    MidMonth
    NL        03              Pro rata at mid period          2009    12        4         12           ticked
    NL        03              Pro rata at mid period          2009    12        25       12           ticked
    NL        03              Pro rata at mid period          2009    12        31        1            ticked
    NL        03              Pro rata at mid period          2010    1          15        1            ticked
    Thanks in advance

    Deepak,
    Your period 12/2009 starts and ends between 11/14/09 ends 12/25/09. Now you acquire an asset on 12/4/2009. As per OAVH, you want depreciation calculation start mid-period. Then how is depreciation start date of Nov 14, 2009 for this case?
    Then you acquire an asset on Dec6, 2009. This, as per OAVH, falls into period 12/2009. Then why should the calculation start from period 1/2010 for this case?
    Thanks,
    Asheesh

Maybe you are looking for

  • How can I print directly print a report from another app?

    Hi, Can I print a report (printer schedule immediate) passing parameters from another application? Like a html page! Thanks a lot. R.

  • How to extract R/3 (4.7) data to an external data warehouse server

    Hi, What are the methods or steps of extracting R/3(4.7 - no BW module) data to an external database (or flat file) for generating reports in an external BI system? Can I use ABAP to do ETL and how? Thank you, Bruce

  • BP TRANSFER

    I want  to transfer a BP from one server to another along with the roles assigned  to  Bp in  former server.Though i can transfer Bp from one server to another ,but i have to assign it the roles again to the latter server, is there any bapi to solve

  • Minimizing license costs for multiple users

    Hi all, I am investigating having multiple users (from different companies) share access to 1 Business One client but have multiple databases (representing each company) connected to this one client.  They would connect via Citrix, Terminal Server et

  • Dictionary lost - I have no words!

    Last week out of the blue, while typing in AppleWorks WP I went to spell check and got an error message: "The main spell dictionary is not installed". Where did it go? How do I get it back? Today I also attempted to open a couple of fairly recent doc