Calendar doesn't work any more

I get a message saying 'there is a problem' so the new entry doesn't show on the web: http://bushcottages.com.au/DC_AvailabilityCal/admin/index.php?id=1# it has to be fixed really quickly as I am going to get double bookings if it isn't; regards, Claudine

Well... where is a PHP calendar on this page: http://www.dreamweavercalendars.com/standalone-calendars/asp-multi-availability-calendar ?
My products
The following products are associated with your Adobe ID, through either registration or product download and installation. We use this information to tailor the page content you view on this site and in our support section.
Products in use Version Platform Registration date
Dreamweaver
CS3
Win
Aug 2, 2008
I did pay for the calendar but I can’t find where it is filed.
I am now learning how to make a web page with code only without Dreamweaver because what I see on the design in Dreamweaver is all wrong, (dreamweaver Lodge. gif) if I do a preview (preview Lodge. gif) it is correct and when it is uploaded it also is correct.
Dreamweaver was working ok when I used tables but it doesn’t like divs, which I am told is better.
Cheers, Claudine

Similar Messages

Mini displayport doesn't work any more

My Mini Displayport doesn't work any more with VGA, DVi, just with the Apple Cinema Display. It started one week ago, I've tried many different monitors, but it seems to be that it only works with the Apple Cinema Display, Thunderbolt Ethernet Adapter is also accepted but nothing else. PRAM, SMC, booting from an Harddisk with Mavericks (I'm on 10.10.2), Safe Mode, nothing works. I have a Macbook Air, 11 " from Mid 2013, no warranty any more. Today I was at Bense, a german reseller (thank you guys for your effort), they did the same tests and some more, but also found nothing. Is there anyone with the same problems and a solution for it?
Cheers
Ayhan

Does it work on the other command key? I typically use the one to the left of the space bar, and at one point of time, it stopped working. but then i started to use the command key to the right of the keyboard which worked. but, then i started using the one that wasn't working, and just clicking slowly rather than quickly, and now it seems to work again. Don't know why . . . but that is what happened for me.

Ipone 4s display suddenly doesn't work any more. i can't even unlock it as it put the numbers itself. and if i am lucky to unlock it opens apps and does everything whenever my finger comes near without even touching it. can anyone help?

ipone 4s display suddenly doesn't work any more. most of the time i can't even unlock my iphone as it puts the numbers itself. and if i am lucky to unlock it opens apps and does everything else whenever my finger comes near the display without even touching it. I did reset and also updated my operating system. But the problem stills shows up... can anyone help please?

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Yahoo mail doesn't work any more in macBook mail

Yahoo mail doesn't work any more in mac mail. Any help?

Did you tried soft reset to your device?
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

PEN TOOL DOESN'T WORK ANY MORE after PS 2014.2 update!

I just downloaded the latest Photoshop update. Pretty slick......adjustable fonts in the dropdown menus again.....nice guide improvements. One little problem....THE PEN TOOL DOESN'T WORK ANY MORE. The program is totally useless. What the h%+l is wrong with adobe? At least I can still use Photoshop CC. Anyone got a fix for this?
Jim

The program is totally useless. What the h%+l is wrong with adobe?
Venting is not going to do much good, please read these (especially the section headlined "Supply pertinent information …"):
Best practices: Usage | Adobe Community
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
On Max OSX 10.8.5 I can not notice a dysfunctional Pen Tool so far.

Aperture 3.0.3 - MobileMe doesn't work any more

F*!
I have installed new Aperture update and since then I'm only having problems. First I had to repair my library. Fortunately worked.
But the sync of my MobileMe galleries doesn't work any more. I try to start the sync manually but it doesn't work. I double click on the sync icon but nothing happens. New galleries do not sync, too.
Aperture is really annoying. Every some weeks more trouble. Slow, not syncing, what will be next?
Did you have the problems with MobileMe and Aperture? Any idea what to do?
Thanks ...

Actually lost some photos in my galleries after the update. I held down the Option and Command keys while starting APerture and repaired the library permissions and then resynced the galleries. One gallery was stubborn, I had to remove a photo from this gallery and then drag it back into the gallery. This allowed everything to update.
null

In iTunes, how do I switch to an Ipod nano from and old ipod that doesn't work any more

in iTunes on your computer, how do I switch to an Ipod nano from and old ipod that doesn't work any more? It has all the folders and songs I had on my old ipod, but does not recognize my ipod nano and cannot sync with it?

Hi bob12345S,
If your iPod nano does not appear in iTunes when connected to your computer, you may want to troubleshoot using the steps on this page -
Apple - Support - iPod nano - iTunes Troubleshooting Assistant
http://www.apple.com/support/ipodnano/assistant/itunes/
Thanks for using Apple Support Communities.
Best,
Brett L

CTRL+RMB doesn't work any more on Firefox4.

[http://www.lingoes.net Lingoes] translator uses CTRL+RMB to capture text. It doesn't work any more on Firefox4. Why? Is it possible to restore it? Thanks!

Thanks for your answers!
I found out, that only on the US site Expert Mouse there is no software for Lion.
(The one you can get there is from 2006!)
But I found suitable TrackballWorks software on the Kensington UK site
http://eu.kensington.com/kensington/en/gb/o/15/sku/498/64325/kensington+expert+o ptical+trackball.aspx
of 2010 and a Beta-version of July 2011.
Since the 2010 version works fine under Lion I'm happy with it.
I hope this will also help others with problems with old Kensington software.
Thanks again!

My wlan doesn't work any more need help pls

my wlan doesn't work any more need help pls

Maybe you'd like to clarify "doesn't work".

AirportExpress - AirTunes doesn't work any more after wifi router change

AirTunes doesn't work any more since I have changed my wifi router.
I have fully reseted the AirportExpress station. I can see the AEX station in the drop down menu of iTunes but it can't connect.
When I use Airfoil, all works fine.
I have tried to trash to Airport preference file but this was unsuccessful as well
Any idea to correct this ?

Try the following steps and let me know if this works for you.
Press the wireless button on your printer, go to print reports, and select configuration.
After you have that, we will need to access the printers Embedded Web Server (EWS). You can do so by entering the printers IP address (from the network configuration page) into your browsers address bar and pressing enter.
Once there, press the "Network" tab at the top of the page. From there you will want to click the "IPv4" button, located on the lef-hand side of the page. It will be there for WIreless and Wired, so make sure to click the one for you however you are connected. If you do not see "IPv4", you should see "Networking", press that and then press "Network Address(IP)".
Next, you will want to click the small round button next to "Manual IP Address" and then fill in the boxes for IP Address, Subnet Mask, and Default Gateway, using the information found on the network configuration page.
For the Primary or Preffered DNS Server, you will want to enter 8.8.8.8.
For the Secondary or Alternate DNS Server, you will want to enter 8.8.4.4.
Click apply and when the message pops up saying that the changes have been applied, press "OK".
Press the power button on your printer, wait for it to fully power off and then press it again to power it back on.
After doing this, go ahead and try to enable ePrint again.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Tabsontop console command doesn't work any more since v29.0.1

I used to be able to put the tabs on the bottom where they belong using the console, and now this command doesn't do anything. I don't want to use Chrome, I want to use Firefox, just make it a default option instead of making me root around in console settings that don't even work any more.

You do not need to install the Stylish extension to be able to do this.
You can easily create a chrome folder in the Firefox profile folder and a userChrome.css file in this folder with the code.
Note that you may need a higher number (CTR uses #TabsToolbar {-moz-box-ordinal-group: 100} and Tab on Bottom uses: #TabsToolbar {-moz-box-ordinal-group: 10000 !important;}) as there may still be toolbars around that use a higher value for this property.
See also:
*[[/questions/996959]]
*[[/questions/997335]]
Add code to the <b>userChrome.css</b> file below the default @namespace line.
*http://kb.mozillazine.org/userChrome.css
<pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
#TabsToolbar {-moz-box-ordinal-group: 10000 !important;}
</nowiki></pre>
The customization files userChrome.css (user interface) and userContent.css (websites) are located in the <b>chrome</b> folder in the Firefox profile folder.
*http://kb.mozillazine.org/Editing_configuration
You can use this button to go to the currently used Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)

Login to DPS doesn't work any more - waiting since 10 days for support

Hi,
10 days ago my login to Folio Producer didn't work any more - form one minute to next while working on a folio. I get a message that I need to contact support.
I did this immediatly 10 days ago - but nothing happend until now. Meanwhile I phoned Adobe support and asked why they don't help me but they told me that I need to wait.
The Adobe ID had been used for a professional DPS account until beginning of August but we did not renew the abo.
We now use Creative Cloud. Today my next app was ready and I began to create the app (Single Edition with Creative Cloud).
Then I noticed that the Adobe ID for which we have bought the Creative Cloud has no right to login to DPS, too!
I'm hopeless!
What can I do to get access to my Single Edition with Creative Cloud when the Adobe support ignores my case?
Has anyone had a problem like this? Or is there anyone at Adobe who is able to help me? My customer is waiting for the app going online!
Best regards
Almute

When using DPS with CCM, you do not need to login to Folio producer anymore. From Folio Builder Panel in Indesign, go to Create App, that will launch DPS App Builder, login with your CCM id and create the App. The process has been simplified for CCM DPS customers.
You can login to Folio Builder Panel using your new CCM id, use that to upload folios and then go to Create App from Folio Builder Menu.
I also checked that you had a professional account which was closed. Have you use the same Adobe id to subscribe to CCM? Please send me a PM with all the details inluding your CCM id so that I can look into the issue.

Adobe InDesign Licence doesn't work any more

Hi folks.
Since Adobe doesn't provide any help I have to turn to you now.
It says: Error 150:30 - my licence isn't valid any more.
For the record, I have InDesign CS4 and a Mac 10.7.5.
Any ideas?
Thank you very much!!

1. Did your PC come with Snow Leopard or did you install it?
2. Make sure the "mute" key is not pressed.
3. Did this happen after installing a software update? Open software updates and under installed updates, was there an update installed around the time the audio stopped worked?

"open file in Photoshop" doesn't work any more.

When I right clicked a picture in Lr (most recent version) and selected "open file in Ps (CC 2014)" Photoshop launched, but the image didn't show up.
I tried several times, with Ps closed or open, but to no avail. Opening the file as a "smart object in Ps" works, and also opening the file in a third party application (Perfect Effects 8) works fine. Just Ps CC 2014 doesn't load the image from Lr.
Any hints?
Mac OS X 10.9.4 and Adobe CC, all products at the most current level.

See this article:
Edit In doesn't work in Lightroom 5.5 from Photoshop CC 2014

HT1918 My credit card is declined and it doesn't work any more-I want to use my same credit card but I can not update it

Ok forever the same thing-I have as we'll declined credit card on my payment method,I've updated everything but of course it doesn't work forever,
What the ------ nothing works for this
Any useful tips -I tried lots of them and :(((((((((((

What happens when you try to remove the card, and how are you trying to remove it ?
Changing payment info : Change or remove your payment information from your iTunes Store account (Apple ID) - Apple Support
If you aren't getting the 'none' option on the payment details screen : Why can’t I select None when I edit my Apple ID payment information? - Apple Support

Calendar doesn't work any more

Similar Messages

Maybe you are looking for