Calendar Image not displayed in Date Picker

Hello Everybody
We are currently running HTMLDB 1.5 on a 9.2.0 Oracle DB. Earlier this week, we had to adjust path for #IMAGE_PREFIX# to point to a new location. Since then, the PopUp Date-Picker won't work. The Image path still points to the old location (i.e /i/arwlftw.gif) rather then our new IMAGE_PREFIX. Since the code of the javascript function wwv_flow_utilities.show_as_popup_calendar is wrapped in the package, we can't change the path manually.
Any help would be appreciated. We almost finished our application, and we are stuck at this point.
Thanks for your help
Simon

Tools>Internet Options>Security tab, click "Reset all zones to default"
MSIE browsers use MIME sniffing. rename the file back to its .jpg extension.
Rob^_^

Similar Messages

Calendar List not displaying all dates after iOS 5.0.1 OTA update

Following the recent iOS 5.0.1 OTA update, in list mode my calendar now only displays days on which I have entries. Previously it showed a list of all days. Can this be changed by a setting somewhere or is this a bug in the iOS?

All was good, My battery and SIRI were working fine, then my bad luck that i updated my phone to iOS 5.0.1 (which is promissing better battery life and Siri funcionality). After updating all went crazy, SIRI is not working any more (it says cant do any thing right now and try later, and i am now trying from 2 days), Battery is not lasting longer then 12 hrs as it was better before. I am seriously thinking to go back to my iPhone 4 and distroy iPhone 4S
APPLE????? i need answers????

Display as Date Picker (DD-MON-YYYY)

Hi everyone,
can you please help me:
I want to change an item as Display as Date Picker (DD.MM.YYYY). I cannot find this mask.
Can you help me to change or can you tell me, where i could find an example?
Tahnk you and best regards
Siegwin

Note that changing the format of a Date Picker does not change the default database input/output date format. Meaning, the NLS_DATE_FORMAT (the default format used when selecting from, or writing to, the Oracle database) does not change when the date picker is changed.
The date picker format used should match the date format of the application. Meaning that if you retrieve a date from the database into a text field and it found to be in the YYYY-MM-DD format, then the date picker used should be in the YYYY-MM-DD format and if the date retrieved from the database is in the format DD-MON-RR then the Date Picker used should also be in that format.
The date picker is there to allow dates to be chosen from a calendar in a particular text format.
So, set your date picker to match your NLS DATE FORMAT setting.
Now, if you want to change the default input/output date format (which is likely your desired effect), then you want to start looking at the NLS settings in your database, the NLS settings in your DAD (reference Marvel.conf), and the NLS settings as they are affected by your Web browser Regional Settings (i.e. Language, territory). If this is the case, refer to the following postings:
HTMLDB - HOWTO Work with Dates
Re: HTMLDB - HOWTO Work with Dates
HTMLDB - HOWTO Work with Dates
HTMLDB - HOWTO Work with Dates
YYYY-MM-DD Format for Canada and ISO
YYYY-MM-DD Format for Canada and ISO

CF slows down to a halt ... images not displaying

My primary laptop on which I do all coding ...
- less than 1 year old
- Dell (cough) XPS M1730
- Windows XP (latest)
- ColdFusion Ver 8, developer edition.
- No other issues with laptop
Also running
- SQL 2000
- Synergy
- Anti virus etc. changed Norton daily scan and unaware that I have picked up any viruses - I was my hands very well and often
Over 6 months gradually CF has been slowly not display internal referenced <img src> tags. External work fine.
To the point now where most in our app do not display.
Then in the past 3-4 days a lot of pages when called give Firefox or IE errors:
Page will not display with too may users error.
But there aren't any others.
I go to all other web site, no issues with speed.
I just cold warm booted the machine and now while page 1 appears, page 2, login, takes minutes to appear. But on a beta server (also developer edition) it's instant.
When I go straight into the browser, it works fine, albeit no images, crashes with a known bug (missing application variable), fix it, then resume, then just sits there forever.
And there's no difference between the two machines ... well, not in "that" way.
Adding to my confusion is ... I cannot get into the CF Admin panel.
I can see it approve me, then it just spins.
Nothing has changed on machine in past weeks EXCEPT traveling when I sign in to the usual plethora of wifi and other networks but never had a problem - except luggability
I am thinking of, UGH, reinstalling Windows ... but why bother if it's working perfectly and only ColdFusion has an issue.
Now COLD booted machine for 5 minutes.
Everything seems better except CF still a BIT sluggish and still not "drawing" most images. Able to access Admin panel. Even if there images not displaying.
Anyone any ideas?

Thanks for your prompt reply ...
We scoured for a folder like that and found none.
What we DID find is that over the years of coding, we have a template count of 3,500 files in 130 folders, but the root where we start is about 1,500 files. 144 megs total size though.
That shouldn't be too much? Esp as our beta and production servers are using the same amount with no issues.
Admittedly production is CF 7.X.
Much more powerful machines but still.
It would have made sense as that is the only thing on the machine that has "grown" ... but no luck.
Does remind me of the day when our mail server got hacked and we had 100,000 outbound in the spool. That was fun.: :)

View the .rtf file not display the data in BI Publisher Enterprise.

Hi,
Platform: OBIEE 10g in NT XPsp2
View the .rtf file not display the data in BI Publisher Enterprise.
Step 1, I created Answer-request, create .rtf file with Word and add the request name, Add bar chart and table, preview PDF is working fine with data, Upload this template to Answers, View Template from Answer is working fine with data.
Step 2, Answers – More Products > BI Publisher > My Folders > Create a new report > Edit > Data Model > New > Type: SQL Query > Data Source: Oracle BI EE > Query Builder > from SupplierSales assign Customer, Periods, Sales Facts (select Region, state, Year, Units Shipped) > Results > Save > Save
Click Layouts > New > enter Name ….. > Click Layouts > borrows .rtf file in Manage T file > Upload > Save > Click View
It is showing only the .rtf file without data. Why there is no data?
Please guide me to solve this issue.
Thanks,
Jo

Thanks for you reply,
Our scenario is this report is basically a dissconnected mode report... we are developing these reports for mobile clients.
We dint face this kind of issue while developing other reports.
So please let us know if you have any idea on why we are facing this issue.
Regards,
Maneesh

Strange scenario,Oracle can not display the data in mysql correctly

I use Heterogeneous Service+ODBC to achieve "oracle access mysql"(any other method?),and now i find Oracle can not display the data in mysql correctly:
-------mysql------------
mysql> create table tst(id int,name varchar(10));
Query OK, 0 rows affected (0.00 sec)
mysql> insert into tst values(1,'a');
Query OK, 1 row affected (0.00 sec)
mysql> select * from tst;
------------+
| id | name |
------------+
| 1 | a |
------------+
1 row in set (0.00 sec)
mysql> show create table tst\G
*************************** 1. row ***************************
Table: tst
Create Table: CREATE TABLE `tst` (
`id` int(11) DEFAULT NULL,
`name` varchar(10) DEFAULT NULL
) ENGINE=MyISAM DEFAULT CHARSET=utf8
1 row in set (0.00 sec)
-------------oracle ------------------
SQL> select count(*) from "tst"@mysql;
COUNT(*)
49
SQL> select * from "tst"@mysql;
id
1
SQL> desc "tst"@mysql;
Name Null? Type
id NUMBER(10)

You can make the following query on the result page:
"select * from the_table where movietitle = ? and cinema = ?"
then you set movietitle and cinema to those which the user selected. If the resultset contains more than 0 rows, that means the movie is available.
Below is the sample code, it assumes you have a connection to the database:
PreparedStatement stat = myConnection.prepareStatement("select * from the_table where movietitle = ? and cinema = ?");
stat.setString(1, usersMovieTitleSelection);
stat.setString(2, usersCinemaSelection);
ResultSet res = stat.executeQuery();
if (res.next()) {
out.print("The movie is available");
} else {
out.print("The movie is not available");
}Now just add that to your JSP page. Enjoy ! =)

DataGrid does not display XML data

Hello, and thanks for reading this...
I am having a problem displaying XMLList data in a DataGrid.
The data is coming from a Tree control, which is receiving it
from a database using HTTPService.
The data is a list of "Job Orders" from a MySQL database,
being formatted as XML by a PHP page.
If it would be helpful to see the actual XML, a sample is
here:
http://www.anaheimwib.com/_login/get_all_orders_test2.php
All is going well until I get to the DataGrid, which doesn't
display the data, although I know it is there as I can see it in
debug mode. I've checked the dataField property of the appropriate
DataGrid column, and it appears correct.
Following is a summary of the relevant code.
...An HTTPService named "get_all_job_orders" retrieves
records from a MySQL database via PHP...
...Results are formatted as E4X:
HTTPService resultFormat="e4x"
...An XMLListCollection's source property is set to the
returned E4X XML results:
...The "order" node is what is being used as the top-level of
the XML data.
<mx:XMLListCollection id="jobOrdersReviewXMLList"
source="{get_all_job_orders.lastResult.order}"/>
...The "jobOrdersReviewXMLList" collection is assigned to be
the dataProvider property of a Tree list, using the @name syntax to
display the nodes correctly, and a change event function is defined
to add the records to a DataGrid on a separate Component for
viewing the XML records:
<mx:Tree dataProvider="{jobOrdersReviewXMLList}"
labelField="@name"
change="jobPosForm.addTreePositionsToDG(event)"/>
...Here is the relevant "jobPosForm" code (the Job Positions
Form, a separate Component based on a Form) :
...A variable is declared:
[Bindable]
public var positionsArray:XMLList;
...The variable is initialized on CreationComplete event of
the Form:
positionsArray = new XMLList;
...The Tree's change event function is defined within the
"jobPosForm" Component.
...Clicking on a Tree node fires the Change event.
...This passes an event object to the function.
...This event object contains the XML from the selected Tree
node.
...The Tree node's XML data is passed into the positionsArray
XMLList.
...This array is the dataProvider for the DataGrid, as you
will see in the following block.
public function addTreePositionsToDG(event:Event):void{
this.positionsArray = selectedNode.positions.position;
...A datagrid has its dataProvider is bound to
positionsArray.
...(I will only show one column defined here for brevity.)
...This column has its dataField property set to "POS_TITLE",
a field in the returned XML record:
<mx:DataGrid width="100%" variableRowHeight="true"
height="75%" id="dgPositions"
dataProvider="{positionsArray}" editable="false">
<mx:columns>
<mx:DataGridColumn width="25" headerText="Position Title"
dataField="POS_TITLE"/>
</mx:columns>
</mx:DataGrid>
In debug mode, I can examine the datagrid's dataProvider
property, and see that the correct XML data from the Tree control
is present. However, The datagrid does not display the data in any
of its 6 columns.
Does anyone have any advice?
Thanks for your time.

Hello again,
I came up with a method of populating the DataGrid from the
selected Item of a Tree Control which displays complex XML data and
XML attributes. After the user clicks on a Tree branch, I call this
function:
public function addTreePositionsToDG(event:Event):void{
//Retrieve all "position" nodes from tree.
//Loop thru each Position.
//Add Position data to the positionsArray Array Collection.
//The DataGrid dataprovider is bound to this array, and will
be updated.
positionsArray = new ArrayCollection();
var selectedNode:Object=event.target.selectedItem;//Contains
entire branch.
for each (var position:XML in
selectedNode.positions.position){
var posArray:Array = new Array();
posArray.PK_POSITIONID = position.@PK_POSITIONID;
posArray.FK_ORDERID = position.@FK_ORDERID;
posArray.POS_TITLE = position.@POS_TITLE;
posArray.NUM_YOUTH = position.@NUM_YOUTH;
posArray.AGE_1617 = position.@AGE_1617;
posArray.AGE_1821 = position.@AGE_1821;
posArray.HOURS_WK = position.@HOURS_WK;
posArray.WAGE_RANGE_FROM = position.@WAGE_RANGE_FROM;
posArray.WAGE_RANGE_TO = position.@WAGE_RANGE_TO;
posArray.JOB_DESCR = position.@JOB_DESCR;
posArray.DES_SKILLS = position.@DES_SKILLS;
positionsArray.addItem(posArray);
So, I just had to manually go through the selected Tree node,
copy each XML attribute into a simple Array, then ADD this Array to
an ArrayCollection being used as the DataProvider for the DataGrid.
It's not elegant, but it works and I don't have to use a Label
Function, which was getting way too complicated. I still think that
Flex should have an easier way of doing this. There probably is an
easier way, but the Flex documentation doesn't provide an easy path
to it.
I want to thank you, Tracy, for the all the help. I checked
out the examples you have at www.cflex.net and they are very
helpful. I bookmarked the site and will be using it as a resource
from now on.

Product Revenue Bookings and Backlog Dashboard does not display any data

Product Revenue Bookings and Backlog Dashboard does not display any data even though the load completed successfully.
They are able to see just the parameters.
Not sure if the upgrade of the database from 9.2.0.6 to 10.2.0.3 is a factor.
What can I check?
Is there some table to verify that the data exists for display in the Product Revenue Bookings and Backlog Dashboard?
Screenshot is at:
https://gtcr.oracle.com/gtcr-dir/gtcr_5637/6415786.993/Product_Revenue_Bookings_Backlog_Dashboard.doc
Support suggested to create a new request set and run the initial load with load all summaries option; but there was no change in the Product Revenue Bookings and Backlog Dashboard.
Any ideas?

hi
We have faced the similar problem after the upgrade to 10G
What we did was
Ran the initial load of time dimension, Item setup request set, and the request set of all the dash board in the clear and initial load mode..
we were able to get the data once the clear and load is completed successfully
Regards
Ramesh Kumar S

OBIEE 10G Embedded Image not displayed on PDF

Hi
We have some embedded images (source on network share or on the webserver) on a dashboard. On the screen the images are displayed without problems.
But if we want to print the dashboard (f.e. PDF) the images are not printed. In html-view the images would be displayed.
Is there a known bug that images can't be printed on dashboard pages or do we have to embed them different?
Thank you

Hi Team,
I do face the same issue of image not displayed in only pdf output format. Our client has deployed OBIEE 10.1.3.4.1 using Weblogic application server and is accesible through a secured url access.
I have followed the fmap syntax to locate the image, also made sure the image is getting accessed through url, tried with different images of different sizes . In all cases the image display is appearing fine in HTML & Excel output. But not getting displayed only for pdf output.
Can you please help me with this regard if am missing any specific setup for pdf output. Is there is any pointers or documentation available to get around this issue.
Thanks in advance.

OBIEE 11G Embedded Image not displayed on PDF

Hi
I have some embedded images on a dashboard. On the screen the images are displayed without problems.
But if we want to print the dashboard (f.e. PDF) the images are not printed. In html-view the images would be displayed.
All the images are referenced with the fmap path.
Any way to print the images in the pdf ?
Thank you
obiee 11.1.1.5
O.S : Oracle Linux 5.6 x64

Hi Team,
I do face the same issue of image not displayed in only pdf output format. Our client has deployed OBIEE 10.1.3.4.1 using Weblogic application server and is accesible through a secured url access.
I have followed the fmap syntax to locate the image, also made sure the image is getting accessed through url, tried with different images of different sizes . In all cases the image display is appearing fine in HTML & Excel output. But not getting displayed only for pdf output.
Can you please help me with this regard if am missing any specific setup for pdf output. Is there is any pointers or documentation available to get around this issue.
Thanks in advance.

JPG images not displayed correctly in Bridge and Photoshop (Mac OS)

(Note: I have copied the content of this query from the Creative Suites forum where I originally opened it.)
I am using CS4 under OSX 10.4.11 on a PowerMac G5 Quad with 23" Apple cinema display. Images which have been captured as JPG are displayed fine by Preview, but when opened in Bridge, Camera Raw or Photoshop. the colours are all "washed out". The attached screen capture should give an idea of the difference, with the upper being Camera Raw (image settings) and the lower being Preview. My monitor has been calibrated and I'm using sRGB IEC61966-2.1 colour space in Camera Raw and Photoshop. The colours displayed by Preview are pretty close to "real life". I find it virtually impossible to adjust the colours in Photoshop to get back to anything similar.
After opening the image in Photoshop without adjustment, and Save As JPEG with embedded color profile, Preview displays the new image the same as Photoshop. Save As JPEG without embedded color profile, and Preview displays this copy just like the original. It seems that Photoshop is making different (incorrect) assumptions about what color space to use when there is no embedded color profile. Shouldn't it assume sRGB like virtually everything else (http://en.wikipedia.org/wiki/SRGB)? Or is its interpretation of sRGB incorrect? How can I fix this?
Re: JPG images not displayed correctly in Bridge and Photoshop

xxxxyyyyz wrote:
…If there is someone out there who has experience of obtaining decent colour management in CS4 on a Power PC, I would really like to know how you achieved it.
That would be yours truly, and I hasten to reply because I may have some insights that can help you too.
Just get it it out of the way, here's my setup:
Photoshop 11.0.2 ("CS4"); VersionCue disabled and uninstalled.—2.5 GHz Power Mac (PPC) G5-Quad; 16GB RAM; mutant, flashed 550MHz nVidia GeForce 7800GTX 1,700MHz 512MB VRAM; ATTO ExpressPCI UL5D LP SCSI card; Mac OS X Tiger 10.4.11 and Leopard 10.5.8 boot drives; Spotblight, Dashboard and Time Machine permanently disabled; dual 22" CRT monitors; USB wireless 'n' available but connected to the Internet via wired Ethernet; 1 FW flatbed scanner; 2 SCSI scanners (one tabloid-size transparency scanner and a film scanner); various internal & external HDs; FW Epson 2200 and Ethernet Samsung ML-2850ND printers; 2 X Back-UPS RS 1500 XS units.
I can unambiguously and in good faith represent to you that my color management, from capture to print, is as spot-on as anyone with any kind of setup can hope to achieve. Unequivocally and without qualifications.
Now, first things first: Forget about trying to synchronize color management across the point applications lumped together only by Adobe marketing fiat into a variety of meaningless "creative suites". Concentrate on Photoshop. Do not try to use Bridge to synchronize anything.
The "suites" are a totally artificial construct created by Adobe bean counters and marketing types. The point applications (i.e. the individual programs clumsily bundled together, e.g. Photoshop, Illustrator, InDesign, etc.) are developed independently by separate engineering teams that are not only not in the same building, but in different cities, different states of the American Union, and even in different countries. They have very little communication among them, if any, as evidenced by repeated posts in these forums by Photoshop engineering staff urging us, the end users, to let the other teams know in their own forums that a given problem exists and is actually affecting our work.
Enough said about the cause of the problem. The end result is that Color Management is at very, very different levels of progress and sophistication in each individual point application, with only Photoshop fully entitled to be considered state of the art.
Secondly, a disclaimer: I have been hanging on to my CRT monitors and take care of them as Jascha Heifetz used to take care of his Stradivarius. I don't know what I will do if I manage to outlive the usefulness and accuracy of my CRTs (unlikely at this point). I have despaired in futile efforts to bring the luminosity of any LCD monitor down to where I would feel comfortable calibrating and profiling it. I believe my monitors are the foundation of my color management efforts.
Especially if you have one of the extreme wide-gamut LCD or LED monitors, you'll face an uphill battle.
Be careful to avoid any version 4 icc profiles, whether canned or generated by your calibration software. Stick to version2 icc profiles. Ask the manufacturer of your calibration software/hardware if in doubt.
Here are some not-too-recent, but thoroughly representative screen shots of the calibration results I obtain with my monitors, which I calibrate and profile often and regularly (I validate the calibration at least several times per month).
In a nutshell, my color management practices and settings mirror those described by Bruce Fraser, Jeff Schewe, Andrew Rodney and Gary Ballard's site. I have learned from all of them.
My working color space is ProPhoto RGB. I choose to work with PSD and PSB files. As a long-time, rabid JPEG hater, I only rarely deal with JPEGs, using them sporadically to illustrate a point in this forum or elsewhere in the web. My main output consists of prints.
I only deal with tagged image files (files with an embedded color profile) and often recommend beating up with a baseball bat any moron that hands you an untagged file—figuratively of course, but I find the expression gets my point across unambiguously.
Following is a screen shot of some of my pertinent settings:
Note that I have never bought into the "suite" concept myself. I do have and routinely use Adobe Illustrator 10.x, InDesign 2.x and Acrobat Professional 8.x, but they are all older, independent versions of each point application, licensed at different times.
Be further advised, that the answer to many problems offered by Adobe engineers often is not to install VersionCue, or uninstall it, or at least disable it.
Also, as outlined at the beginning of this post, concentrate on Photoshop, not on synchronizing applications that can't really communicate with each other, despite the claims of Adobe marketing hacks to the contrary.
One big caveat, do not fall into this trap:
xxxxyyyyz wrote:
…I believe my problem has nothing to do with my monitor profile, for several reasons, but…
…It seems extremely unlikely to me that…
You either want to learn, or you don't. You either want to solve your problems, or you don't.
When you start arguing instead of studying, questioning advice instead of following it and detecting where you went wrong, you're on the right track to nowhere. That attitude will get you there fast. Remember you are the one with the problem, and only you can acquire the discipline to learn how to solve it.
Go ahead and ask me anything that is not clear, just don't argue with me please, and don't tell me why you think Fraser, Rodney, Ballard and I are wrong. You see, I am not experiencing any problem that needs fixing. I have an interest in helping you, but not in hearing about your speculations, theories or conclusions.
Good luck.
Wo Tai Lao Le
我太老了

Query not displaying correct data

hi all
my query is not displaying correct data.
in data target secondary sales is showing 1.800 value but in query it is showing
2.00.my requirement is my query shuld show 1.800 value. i also tried to change decimal points but not changes has happend.plz let me knw what is the problem
thanks in advance
shalini gupta

With which u r reconciling the data.
With R3 or Cube.
I think check ur key figure, have u taken the key figure 'with TAX' one or with out tax one??
Regards,
Manoj.

Image not displaying in the Task Sequence Wizard. SCCM2012

This is my question, so I will post the link here.
http://community.spiceworks.com/topic/925727-image-not-displaying-in-the-task-sequence-wizard-sccm2012
Bryan
I captured an image from a PC that I am preparing to be deployed with Office 365. Once I captured
the image, I went to the software library to add the operating system image. That seemed to go on without any issue, but when I look at the summary, I see the big yellow globe saying "in progress" it has not changed since yesterday afternoon.
I then created the task sequence for this image
to be deployed under Software Library, Task Sequences. When I selected the references tab, everything seemed to be in order with the exception of the "operating system image" under type. It was/is showing 0.0% Compliance.

So, the problem described in the other forum post does not match the title of this thread. Are you trying to address two different things? These are unrelated btw.
For the issue in the other thread, you'll have to troubleshoot your content distribution to the selected DP. The distmgr.log and pkgxfermgr.log (assuming you chose to distribute the image to a DP directly attached to your primary site) are the places to
start and will show you exactly what's going on.
As for the title of this thread, we'll need a lot more info to help you there.
Finally, I would suggest you copy your questions from other sources into the thread -- this will help other folks in the future that may stumble upon this thread and will prevent any confusion.
Jason | http://blog.configmgrftw.com | @jasonsandys

S_ALR_87013611 is not displaying any data for GL

Hi,
THe report S_ALR_87013611 is not displaying any data for GL. How to go about this
Regards
SM

Hi,
S_alr_87013611 is a report where we can see the planned and actual costs in cost elements in cost center wise for a specific controlling are for a given period.
Please check if your GL accounts are assigned with the cost elements in FS00.
If not create them.
You can assing all cost elements to many GL at a time using
OKb2_ Give the range and the cost element for each range eg, expenses range - cost element 1, incomeange _Cost element as 11 etc.
OKb3 _Create the batch input session
SM30_ Run the batch input session created
Also please check if you have given the cost center group costt senter range while you entered the ranges in the selection screen in this report.
Similarly please check the cost elements and cost elements group also.
Thanks,
Shilpa.

BEO Calendar not displaying certain dates

Hello
I'm trying to set up a calender which includes, amongst other dates, 30 November 2009. However, because November 2009 spans 6 weeks (1st on week 1, 30th on week 6) the 30th is not displayed.
Is there any way to overcome this as it will mean that I cannot set the reports to run on that date.
Thanks
David

Try a reset. Nothiong is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.

Calendar Image not displayed in Date Picker

Similar Messages

Maybe you are looking for