Calendar time format and week start format

Even though I have the time format set to 12H it displays as if it was 24H in the calendar:
Also, is there any way to change the format of the date picker? We want the week to start on Sunday instead of Monday:

Hi,
1. Tested in 8.81 and 8.82 versions that, the time format in general settings does not apply to calendar time format. Changes applicable only to documents
2. You can change starting of week through calendar form settings. But selection of date still appears from Monday.
Refer below screen shot:
Thanks & Regards,
Nagarajan

Similar Messages

How do you differentiate IDOC XML format and ordinary XML format

how do you differentiate IDOC XML format and ordinary XML format since they are used by IDOC adapter and RFC adapter???

Hi,
Cremas Structure starts with Header and followed by Segments...
Normally it begins like this
<CREMAS03><IDOC BEGIN="1">
The second node is Idoc in the header..
Thanks
Anju

Waveburner : Time Format and Track start marker insertion ?

Hi,
I am exporting the Markers from a Final Cut Pro project to get their position.
I copy/paste this time code in a Track start marker in Waveburner to set it in the right position.
The problem is that in Final Cut Pro the time is set in HH:MM:SS:Fps (Frames per seconds (25 fps in my PAL project)
And in CD tracks window (sorry I am translating from a French user interface) it's not the same time format : CDDA frame (1/75th of a second)...
so the track position is approximative (less than 1 second)
I have selected the right time unit in the Wave View : Min:Sec:Im (25fps)
In preferences I checked "Set Time Format Globally checkbox"
But it's still in CDDA when I insert a track marker...
How could I manage that ?
Thanks for your help
Eric

Seems there is no edit button here.
After having another go at this problem, I think I have found a better solution that solves both formatting and date entry problem. The only downside is that you'll need to make 5 columns for a single date rather than 1.
Step 1.
For each date entry, create the following columns:
| FormattedDate | NumbersDate | Day | Month | Year |
FormattedDate is the final date displayed according to our format.
NumbersDate is the internal Numbers date representation.
Day, Month, Year columns are the ones you use for data entry.
Step 2.
Create/convert our 3 columns date (Day, Month, Year) into Numbers internal date.
So, in NumbersDate column, insert this formula:
NumbersDate: =DATE(Year, Month, Day)
Step 3.
Apply our own formatting for the date output display. In this example, I want an output in the form of Dayname, Day Month Year (Saturday, 24 September 2011).
FormattedDate: =DAYNAME(NumbersDate) & ", " & (Day) & " " & MONTHNAME(Month) & " " & (Year)
This way, changing the raw date input is as simple as changing the respective column. If any discrepancy between entered and displayed data exist, it is easily spotted by comparing between the raw date columns and the formatted output.
Another advantage is reducing the risk of data corruption to the date, since the date is now simply represented as integer values in their respective columns.

Time on Calendar Region Daily and Weekly View

I have created a SQL calendar and the dates work fine, but how can I get the data to display in the appropriate time block on the weekly or daily view? There is no item for calendar_time, only calendar_date. Why is there a view for Daily and Weekly but no way to use the time features???
Thanks.
Andrew

> Hi SDN Experts,
>
> I have a daily chain (#1) that is linked to and AND
> collector. A weekly-friday-run chain is also linked
> to this AND which when both these conditions are met,
> process Z is run.
>
> Today, eg. monday, the daily chain has run and thus
> it triggers event to AND. But the weekly chain has
> not yet run as its only monday. Does this mean this
> chain is still in batch process as it has yet
> completed due to weekly chain not yet triggered by
> time?
It is not such a good practice to club these two like this.
>
> What happens to this chain (& related batch job(s))
> and specifically this AND collector if tueday comes
> and triggers another daily chain run #2?
>
That results in a another wait loop until Friday.> How does the AND collector handle these 2 times of
> triggering event by the daily chain (1 from #1 and
> the other from #2)?
They both will execute around same time twice on Friday.>
> What will happen to the system batch processes if the
> initial daily chain only completely run its course on
> Friday when the weekly chain is finally activated?
> Would there be a compounding effect to the batch
> processes?
> I am concerned about the batch jobs being occupied by
> daily and weekly chain combination which may hang the
> system. Hope this fear is unfounded.
>
> Hope my problem description is clear enough.
>
> Thanks in advance.
>
> Alfonso S.
>

Select Expert Record. Last 6 months and week start date on Monday

Hello,
i am trying to use the select expert record to grab the last 6 months worth of data. I require the week start day to be a monday and end on a sunday.
Can someone please provide some advice the best way to do this
kind regards
david

Hello Abhilash,
Once again thanks for your reply.
Yes this is correct, when it goes back 6 months i need it to skip the days prior and begin on a monday as we are reporting on a mon-sunday basis.
I have tried your formula Date field >= dateadd('m',-6,currentdate) and it seems to grab 6 months of data, but the group weeks are not grouping from Monday to Sunday...
kind regards
david
Edited by: davitali on Dec 2, 2011 9:35 AM

Internal format and externa l format

Hi friends ,
I would like to know the concept of internal format and external format in B.I FLATFILE EXTRACTION?
how we have to use those functionalities?
Thanks in advance,
kumar.

Hi,
In the SAP Help portal see the following link:
http://help.sap.com/saphelp_nw04/helpdata/en/a5/3ec9ea4ac011d1894e0000e829fbbd/content.htm
Rgs
Antonino

Lenovo a3000-H after format and flash starting problem

downloaod the flash file put it into flash tool and i format the tab 1st the again download it its flashed ok but now start lenovo logo then a screen display with red boxes with chines or japanies etc language on the top : please selech the button i select any of them and click on okey but after some time its shows timeout failed ... but recovery menu and reset menu working perfectly.......what shoud i do

I can't turn on WiFi and Bluetooth on my lenovo A3000-h. When I touch the icon it tries to turn on but after several times it remains same with grey icon.I have tried factory reset but no luck. Any help will be appreciated. Thank you in advance.

HT204150 New i-Photo format and iCloud Contacts format is not accepted

I have upgraded Mac to the new i-Photo format. When I try to associate a picture to a contact on iCloud Contacts the new format is not accepted. How can I now use these pictures with the contact list?

If you use iTunes now, you may well end up with duplicates. However if there is no other way, duplicates can be deleted, and this may be your only option.
What exactly is the state of play, are contacts on your iPod in your contacts at iCloud.com

Difference between layout format and word processing format

I have read the manual,help,discussions and am stumped. I look in the manual for a particular action and it won't work. Is this because I am in the wrong format?

Don't know what I would do without your help. You have hit one of the problems I was having. Let me summarize what I think you said:
All breaks are available in WP
The only break in layout is column when we are in a text block
Could you clarify " We may also add floating or embedded blocks of different nature." (WP) What is a floating or embedded block? Blocks that you create yourself, like adding a text block;then move around?
"We must put every components in blocks floating on the blank background" (layout)-I assume you mean the blocks that are shown when I select " show layout"
This has been very helpful. Is there a way to determine all or most differences instead of asking you about each and every problem or at least a general guide
It would appear that WP has more inherent flexibility than layout, but layout has a lot of the work done for us. My immediate goal is to produce a newsletter with graphics to be used as a hardcopy and in a email form.
Thanks!

Full format and reinstall of Lion.

Ok, so I fancied a full format and reinstall of lion - it has an SSD and I wanted to restore it to it's peak performance, while removing all the junk it's acumulated and hopefully fix it's slow wake from sleep. It doesn't have a recovery partition either (blame ccc) so I started up internet recovery and formatted it (I had of course been backing up with time machine). First problem: no FULL format option! Ok, annoying, but I can at least get a nice clean install... second problem: apple can't verify that I own lion (or something to that extent). I didn't buy lion on the store, it came with the computer, so that's probably why, but I really expected better from apple. I was left with one remainin option: restore from backup, which it's still attempting now. Once I've hopefully got my mac to pretty much the same situation I started at, is there anything else I can do? Should I do the same again but just reinstall Lion immediately, instead of trying to format it first?

"In this you can access disk utility and erase your HDD if you want a clean slate." Yes but there are two types of clean slate: the one resulting from a "quick format" and a "full format". The quick format doesn't delete anything, but merks all info as unwanted. This is fine for HDD's as they can just overwrite it, but this is the process that drastically slows down SSD's - they have to read the data, erase it, then write the new data whenever they want to rewrite it, and this kills write speed. I therefore really need at full format. It isn't a bad cable: that's mainly a problem with SATA III drives. It is a MBP not Air. But I DID have to verify my copy with apple... don't ask me why it didn't work. I don't have a recovery partition because I origionally used Carbon copy cloner to clone the HDD onto my SSD, which I now use for time machine backups.

How to add Audio Formats and Video Formats in one movie?

Now that FCP X will not allow different settings how would I change the Audio Format and the Video Format to one movie in Compressor 4?
When I change the Audio to ACC I have a sound file and when I change the Video Format to HD 720 I get the movie but with the original sound.
Any help is always appreciated.

Sorry for this one also. Just finally searched the Inspector windoe in Compressor 4. It is already there.

Birthday calendar bizarre repetitions and other issues

I have the STRANGEST things happening with birthdays on both my iPhone (5, 32GB, white, iOS 6) and iPad (32GB, iOS 6, white).
I'm posting it here in the iPhone forum, assuming more people may be able to help.
First of all, I sync a Google Apps calendar with my iPhone and iPad via CalDAV. I also sync my Google Contacts with my address book (including birthdays), which syncs via my MacBook on OS 10.6.8 using the sync icon in the system tray. (I hesitate to call it MobileMe, even though that's what the System Preferences calls it, because it really has nothing to do with MobileMe -- it does not sync via MobileMe [I do not have an account], it just syncs my Address Book with Google with my phone or iPad when hooked up. It is through a WIRED connection that it does the final sync to the device.)
So, my birthdays from my address/contact books and my Google contacts DO sync and they DO show up on both my iOS devices in the fancy Birthday calendar with the cute cake symbol, as well as in my Google calendar.
NOW HERE'S THE CRAZY PARTS.
Sometime recently, my birthdays were getting repeated. But oddly, enough they are a different amount on the two iOS devices. I have 18 copies of all birthdays (on the same day) in my iPhone calendar and 68 (YES, SIXTY-EIGHT COPIES) in my iPad of every birthday.
My Google calendar shows NO SUCH ERRONEOUS copies.
The crazier thing is that the copies of the birthdays are NOT on the birthday calendar. In fact, IT'S AS IF THEY JUMP AROUND ON DIFFERENT CALENDARS. They show up all one color, but some random color. They will appear or disappear only SOMETIMES if I turn "off" some calendars or others (for example, once they would go away if I hid a "Personal" calendar, another if I hid a calendar I subscribe to via Google but sync via CalDAV from Weather Underground, and another calendar that is a Google calendar but also my "default calendar" in the iOS settings). And this is all within minutes.
When I go into an instance of the repeated calendar event, it will actually say it belongs to my default calendar, regardless of what was hiding or showing it before.
When I try to "edit" the birthday just to see what happens, it crashes the app.
WHAT. THE. ______???
Here's what already I've tried:
Searching the internet for someone with a similar problem. NADA.
Turning off the option to sync my Google birthday calendar via the Google sync page (I think it's actually unnecessary anyway, since iOS pulls from the contact book, anyway). That did nothing.
Hiding all calendars and then selecting them to show one at a time to figure out which calendar was causing the problem, but as I mentioned above, it is not consistent.
Re-syncing my devices with iTunes.
Searching for and merging duplicate contacts in Google contacts.
Turning off the iOS birthday calendar.
Killing and re-starting the calendar app.
Re-starting my iOS devices.
Re-syncing my contact book with my devices.
Someone. Please. Tell me you're having this problem and that you have the solution? I'm going crazy over here! I can't remember anything that may have triggered this to happen.

I figured it out! (Or at least, it's been fixed for a day on both my iPad and iPhone.)
By the way, I discovered more oddities, but I'm not going to even bother with describing them.)
I am assuming everyone here has been syncing their birthday calendar off of Google/Gmail (whether CalDAV or Exchange, it doesn't matter).
The key to this is to know three things:
A) Tgara was on to something: syncing the Google birthday calendar in your Google sync settings -- even though it does not show up in your calendar list on the iphone/ipad -- is the culprit.
B) BUT, simply un-syncing will not make them go away unless you completely un-sync all your Google calendars. Once the repetitions get into your phone/iPad via they are kind of "stuck" there, and you've got to go back to the beginning to un-stick them for good.
C) Thus, it may require some trial and error because I had to repeat this a couple times. I may no have the right order of operations, but this is my best recreation/guess.
How I fixed it (I had to repeat a couple times for some reason):
1) I'm debating whether you have to do this step (I think I did it on my iPhone, but not my iPad, and yet both worked), but it doesn't take long, so you could just to be safe: on your iOS device, Settings > Mail, Contacts, Calendars -- delete your Google calendar account.
2) On your iOS device, go to the proper Google sync page to choose what calendars are available for syncing.
For Exchange, go to: https://m.google.com/sync/settings/iconfig/device
For CalDAV and Gmail/normal sync, go to: https://www.google.com/calendar/b/0/iphoneselect
For Google Apps CalDAV (although it worked for me on the normal page above), go to: https://www.google.com/calendar/hosted/yourhosteddomain.com/iphoneselect
If you're not sure which method you use, do both of them.
3) Sign in and choose the device in question (if prompted) and then uncheck ALL the calendars. Save/apply.
4) Go to calendar app. You should have an On my iPhone or On my iPad calendar and the iOS birthday calendar. Ensure that no repetitions are seen when you check mark each calendar idividually and also collectively to be visible. If there are, repeat the steps above.
5) Once the repetitions are gone, go to your iOS settings and add the calendar account back in if you removed it in step one.
6) Go back to the calendar app. Again, you will have two calendars -- one default Google calendar and one ios birthday calendar. Turn on each one at a time and also together to make sure the repetitions are gone. If they are not, repeat the above again.
7) Once they are gone, go back to the Google sync page(s) and add all the calendars you want back, BUT DO NOT SELECT YOUR BIRTHDAY CALENDAR. Save/apply.
8) Go to the calendar app. Open up the calendar list. Wait for it to refresh. Now you should be able to turn on all your calendars you wish to see, wait for it to propagate, and confirm there are no copies. If there are copies, repeat all the steps!
YOU DO NOT need to erase your contacts. Not sure about iGust's work-around, but that's unnecessary. And christina44, I actually think this is a different problem. All my copies were on the correct date.

HT201514 Can I reset my time capsule and restat

Can I reset my Time capsule and re start?

You do not need to reset to restart.
Reset means changing settings..
Restart means power off.. power on. Since it doesn't have a power switch we just pull the power cable usually.
I am unclear what the question is though?

I am having sporadic issues after new hard drive install and recovery using Time Machine. The same sluggish response, start up screen pixelating...If I reinstall Lion will it wipe out other applications? My HD was formatted and partitioned correctly, I ha

I am having sporadic issues after new hard drive install and recovery using Time Machine. The same sluggish response, start up screen pixelating...If I reinstall Lion will it wipe out other applications? My HD was formatted and partitioned correctly, I have a late 2009 iMac.

Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

SUI Time Calendar Date Format and Hours

Hi
In Fusion/HCM Cloud, the calendar in the Time page of SUI is currently displaying the date in the format MM/DD rather than DD/MM as per our user preferences. Does anyone know how to change this or know if it is a server setting?
Also, when booking absence (full day/elapsed time work schedule) the number of hours is showing 1.0 hours on the first and last day of the absence and then 7.0 hours for the other days in the calendar but this isn't configured anywhere. This is showing correctly in the Availability Calendar within My Portrait. Does anyone know where these hours are coming from?
Any ideas appreciated.
Many thanks
Karen

Do you have a Date object or a String object?
If it's a String object, then just use split or replaceAll or substring (whichever you're most comfortable with) to get just the "2007" portion and then Integer.parseInt.
If it's a Date object, then it doesn't have a format, and you can just feed it to a Calendar and get the year.
Other than that was does "doesn't work" mean?

Calendar time format and week start format

Similar Messages

Maybe you are looking for