Calibration working, speaker test doe

hello,
i have a soundblaster audigy 4 and a 5. surround system.
when i do the calibration, i can adjust everything and when i am done i can hear the sound rotating around me, so everthing is just nice so far. got sounds from all 5 speakers and subwoofer.
but if i use the speaker test thats in the right side of the window i get the sounds for rear right in the frong right speaker and the rear left in the front left speaker. the center speaker however is fine, only all rear sounds are in front.
i have no clue why that is happening, cause the calibration is using my rear speakers perfectly, just the speaker test screws up... does that mean surround is working or not, cos i couldnt really hear stuff coming from the rear speakers when playing games with surround support. like hitman blood money.

Hi @Fesiitis ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv7-4285dx Entertainment Notebook PC and issues with the sound from the speakers. The Troubleshooting tool in Windows 8 can automatically fix common problems with your computer, such as audio recording. Here is a link to test the speakers. Click your speaker setup in Audio channels.
Here is a link to the HP Support Assistant. Just download and run the application and it will help with any software and drivers on your system at the time of build.
Hope this helps you with the sound.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Similar Messages

Audigy2ZS, calibrate = 5.1, Speaker Test = w

Not sure how else to explain this. I was going to try and search for a similar problem, but I don't know how to explain this!
Audigy 2 ZS
Altec Lansang 25 5. Speakers
I've been using this set-up for ages.
Messed around in my system and hooked everything back up and suddenly had a weird problem. A total reinstall of WinXP SP2 (due anyways) didn't fix it.
When I do the "Speaker Calibration" for 5. speakers all of the surround effects are fine and I can set it up as normal. After, when I click on speaker test, it sounds like this:
Front Left: Front Left
Center: Center (Plus Front Right? Maybe?)
Front Right: Front Right
Rear Right: Front Right
Rear Left: Front Left
I've messed around with the cables in the back but they are plugged into the proper colours.
I just don't understand how the calibrate function gives accurate surround, but then the speaker test (and everything else) is messed up. I just tested the CMSS "Surround" function (playing a song in winamp) and it SEEMS to work.
This is all very strange.

Audyssey builds a sound calibration tool into many home theater system receivers. If you are in the market for a new AV receiver, I recommend that you consider one that has the Audyssey system. The calibration process involves connecting a wired microphone-like device to the receiver, which you place in the center of the listening area. The Audyssey system than plays a variety of sounds from each of the speakers, and automatically adjusts all the audio settings on the receiver for an optimal listening experience.
http://www.audyssey.com/hometheater/receivers.html

DTS Connect. No sound except in speaker test.

Hello. I have a problem.
I get no sound anymore from DTS Connect except when I try the speaker test I get all 5. speakers sound. Window media player can't play any audio files. Need help!
Art.

.-(~)-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------(root@tirion)-
`--# fuser -v /dev/snd/*
USER PID ACCESS COMMAND
/dev/snd/controlC0: strix 2801 F.... pulseaudio
strix 23753 F.... mpd
/dev/snd/controlC1: strix 2801 F.... pulseaudio
If mpd blocks my audio, shouldn't it work then when I stop mpd? Because that's not the case...
Edit: When I set my mpd audio_output to this:
audio_output {
type "pulse"
name "pulse audio"
I get the following:
.-(~)-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------(root@tirion)-
`--# fuser -v /dev/snd/*
USER PID ACCESS COMMAND
/dev/snd/controlC0: strix 5730 F.... pulseaudio
/dev/snd/controlC1: strix 5730 F.... pulseaudio
/dev/snd/pcmC0D0p: strix 5730 F...m pulseaudio
And if it helps:
`--# lspci | grep Audio
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Turks/Whistler HDMI Audio [Radeon HD 6000 Series]
Last edited by strix (2014-04-02 16:48:52)

No Subwoofer during games or music, but audio heard on it during speaker test...

Hi all,
I really hope someone can help me with my problem. I recently purchased a Yamaha A/V Receiver that has a Multi-Channel Input (Model: HTR-5835). I have an Audigy 2zs gamer card and I am running three Mini (3 pole) to RCA adapters into the three seperate channels on the multi channel input.
I assume all the speakers are set up correctly because during both the Receiver's AND the THX control panel speaker tests I could heard audible noise coming from my subwoofer. I can also set the receiver to tuner and listen to the radio with the subwoofer.
I have CMSS turned on and I have listened to MP3's through winamp and WMP and there was no subwoofer, but all other channels (including center) worked fine. I also tried playing BF942, WoW, guild Wars and Doom 3 with no subwoofer sound at all.
Does anyone have any ideas or a solution to figuing out this issue? I have been wracking my brains and searching the net for 3 days to no avail.
Thank you.
Ndy

It's in Bass Management section of the Speaker Settings. Bass Boost will be greyed out with 5.1/6.1 or 7.1 speakers as it is meant for 2.1 and 4.1 systems.
<IMG height=335 src="mk:angry:MSITStore:C:\Documents and Settings\Paul Cook\Local Settings\Temporary Internet Files\Content. IE5\WDA3CDI7\A2ZS[].chm::/images/spkr settings.gif" width=499 border=0>
It should be possible to get a decent output from the sub when using the bass redirection. This will give you 5.1 when upmixing with CMSS or playing games and 2.1 with stereo sources. If your sub can't amplify the signal enough, you may need to put a small preamp in between the soundcard and receiver to boost it. You could make one yourself if you're into electronics, there will probably be lots of preamp circuit diagrams on the web. DWH explains why the sub output is lower than the rest here:
http://forums.creative.com/creativel...id=8533&page=2.
You could also go for a more expensive fix, which would be to use a crosover like this one in between the soundcard and receiver:
http://www.outlawaudio.com/products/icbm_about.html

SoundBlaster 5.1 no surround sound with the speaker test, but with movies

ISoundBlaster 5. no surround sound with the speaker test, but with moviesO Hello I have a new SoundBlaster XFi Surround 5. USB.
I installed the drivers on Vista 32.
I connected the Soundblaster with an optical cable with my home cinema system.
I checked the 5. speakers option in the Creative Console Starter.
When I will test the surround function by clicking the speakers in the surround test diagramm from the Console.
The front speakers are sending an testsignal, but the rear speakers and the center are silent.
I thought that are settings in the soundcontrol from vista but when I play an Movie with 5. sound, the rear speakers function.
Is ist the optical mode that only support the movie dts signal? Why the Console test from creative doesn't function?
I have further applications but they don't work. Only movies.
Thx

Hi,
S/PDIF?format can only transmit 2 channels of uncompressed audio, which is why you only hear the front channels. For movie dts, an encoded compressed stereo data is transmitted through the S/PDIF optical link to your home cinema system which then decode it into 5. audio.

HDMI audio fails speaker-test, Radeon Richland

I've just put together a new machine and installed Ubuntu 13.10 on it. The system has an integrated AMD Radeon Richland APU. The Onboard audio is working fine (tested with headphones). The HDMI audio is enabled in BIOS, and it's listed in aplay -l and in the Sound Settings dialog. But it's not making a sound, and after many tests and possible fixes, I'm at a loss what to try at this point.
Perhaps the most telling indicator about the problem is the error message I get when I run speaker-test:
speaker-test -l 4 -c 2 -r 48000 -D hw:0,3
speaker-test 1.0.27.1
Playback device is hw:0,3
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
Home directory not accessible: Permission denied
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 64 to 16384
Period size range from 32 to 8192
Using max buffer size 16384
Periods = 4
was set period_size = 4096
was set buffer_size = 16384
0 - Front Left
Write error: -5,Input/output error
xrun_recovery failed: -5,Input/output error
Transfer failed: Input/output error
Things I've tried already:
Ensure HDMI is unmuted in alsamixer
Update alsa to latest daily build. I'm now running oem-audio-hda-daily-dkms - 0.201402110705~ubuntu13.10.1 downloaded from launchpad
Update video driver from radeon to fglrx (catalyst 13.12). Had to write a custom xorg.conf file for this (see below)
Checked volume and settings in PulseAudio Volume Control - set HDMI audio to be the fallback output.
Updated grub as per this thread: https://bugs.launchpad.net/ubuntu/+sour … bug/864735
Here are some further details about the system:
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 1: Generic [HD-Audio Generic], device 0: ALC892 Analog [ALC892 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: Generic [HD-Audio Generic], device 1: ALC892 Digital [ALC892 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
dmesg | grep HDMI
[ 11.201380] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input5
cat /proc/asound/cards
0 [HDMI ]: HDA-Intel - HDA ATI HDMI
HDA ATI HDMI at 0xff744000 irq 52
1 [Generic ]: HDA-Intel - HD-Audio Generic
HD-Audio Generic at 0xff740000 irq 16
cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version k3.11.0-15-generic
lsmod | grep snd
snd_hda_codec_realtek 57495 1
snd_hda_codec_generic 68274 1 snd_hda_codec_realtek
snd_hda_codec_hdmi 46433 1
snd_seq_midi 13324 0
snd_hda_intel 52306 5
snd_hda_codec 137465 4 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel
snd_hwdep 13602 1 snd_hda_codec
snd_seq_midi_event 14899 1 snd_seq_midi
snd_rawmidi 30095 1 snd_seq_midi
snd_pcm 102033 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_seq 61560 2 snd_seq_midi_event,snd_seq_midi
snd_page_alloc 18710 2 snd_pcm,snd_hda_intel
snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer 29433 2 snd_pcm,snd_seq
snd 69141 22 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi
soundcore 12680 1 snd
lspci -nn | grep VGA
00:01.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Richland [1002:999c]
lshw -c video
*-display
description: VGA compatible controller
product: Richland
vendor: Advanced Micro Devices, Inc. [AMD/ATI]
physical id: 1
bus info: pci@0000:00:01.0
version: 00
width: 32 bits
clock: 33MHz
capabilities: pm pciexpress msi vga_controller bus_master cap_list rom
configuration: driver=fglrx_pci latency=0
resources: irq:53 memory:c0000000-cfffffff ioport:f000(size=256) memory:ff700000-ff73ffff
cat /etc/X11/xorg.conf
Section "Device"
Identifier "ATI radeon 8650"
Driver "fglrx"
EndSection
Would be very grateful for any insight you guys can provide!
Many thanks
Last edited by Jugdish (2014-02-13 17:46:02)

emeres wrote:Have you tested the cable with some other units?
Yes I plugged in my Windows 7 laptop using the same HDMI cable and TV port, and audio worked fine (after switching from analogue to digital audio in the TV settings). So I don't think the problem is the cable.
Here is the output from
xrandr --props
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 1920 x 1920
DFP1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 698mm x 392mm
EDID:
00ffffffffffff0034a935c101010101
00130103800000780adaffa3584aa229
17494b00000001010101010101010101
010101010101023a80d072382d40102c
4580ba882100001e023a801871382d40
582c4500ba882100001e000000fc0050
616e61736f6e69632d54560a000000fd
00173d0f440f000a2020202020200122
SignalFormat: TMDS
ConnectorType: HDMI
1920x1080 50.0*+ 60.0 59.9 60.1 50.0 24.0 60.0 24.0
1776x1000 50.0 59.9 50.0 24.0 60.0
1680x1050 60.0 50.0 59.9 24.0 24.0
1400x1050 60.0 50.0 59.9 24.0 24.0
1600x900 50.0 59.9 24.0
1280x1024 60.0 50.0 59.9 24.0 24.0
1440x900 50.0 59.9 24.0
1280x960 50.0 59.9 24.0
1280x768 50.0 59.9 24.0
1280x720 60.0 50.0 59.9 24.0
1024x768 50.0 59.9 24.0
1152x648 50.0 59.9
800x600 50.0 59.9
720x576 59.9 24.0 50.1 50.0
720x480 50.0 24.0 60.1 60.0 60.1 59.9
640x480 50.0 24.0 60.0 59.9
DFP2 disconnected (normal left inverted right x axis y axis)
SignalFormat: TMDS
ConnectorType: DVI-D
CRT1 disconnected (normal left inverted right x axis y axis)
SignalFormat: VGA
ConnectorType: VGA
Last edited by Jugdish (2014-02-15 09:53:12)

X-Fi Fatal1ty No sound from rear or center in speaker tests?

I just installed the X Fi Fatalty Xtreme Gamer and cannot get sound from the rear, center or subwoofer in the speaker tests. All the speakers (Logitech G-5 Gamer)?work playing MP3's but that's it. Installed latest drivers uninstalled an reinstalled card etc?Can anyone help with this before I box everything up and ship it back to newegg? Running Vista 64Message Edited by ovrclkd on 0-23-200807:6 PM

After carefully checking this again, it turns out clicking front left or right the sound comes out BOTH the front and rear. To make things more confusing when all but the line (green) 3.5 jack was unplugged ALL the speakers would work. LONG STORY SHORT I SENT THIS P.O.S. BACK TO NEWEGG FOR REFUND. Every thing works great with the onboard audio, I'm in the market for a 7. that works.Maybe Auzentech? Any suggestions?!! With all the issues the peeps are having someone must be using a card that works out of the box in Vista 64

In app purchase is not working in testing environment in sandbox for the past 5 days. Please anyone know about this issue.

in app purchase is not working in testing environment in sandbox for the past 5 days. Please anyone know about this issue.
What i did
1 . Added three products more to the existing in-app
2 . Tested with sanbox
i am getting the error "cannot connect to itunes store" with error code "0" when trying to purchase product in sandbox.
Is sandbox is down?Please help guys..

Apple's sandbox has been down practically all month. You can check the status here:
http://sandbox.itunes.apple.com

SWN_SELSEN not working in test client after client-copy

Hi all,
We are using extended notification without problem until test client was refreshed by client-copy from production client. In test client, report SWN_SELSEN did not generated notification even there are newly generated workflow items. Because of client-copy, I found that tables SWN_NOTIF, SWN_NOTIFTSTMP, SWN_SENDLOG, SWN_TIMESTAMPS are all empty in test client.
Please advise how to make report SWN_SELSEN back to work in test client. Thanks.
<< Additional information >>
(1) Run report SWN_SELSEN_TEST with test Case 5 - Simulate Send Only. After this, some entries were written to above tables. But test on new workflow item, the schedule report SWN_SELSEN still fail to trigger notification.
(2) Run report SWN_SELSEN_TEST with test Case 4 - Send One Message Only. It triggered notifications for all active workflow items and sent out several hundred emails including workflow item created in step 1. However, further test on new workflowitem, the schedule report SWN_SELSEN is still unable to trigger notification.
I think there may be something else missing, like the timestamp of delta. Please help.
Regards,
Donald

Hello,
I've experienced a few cases where stopping SWN_SELSEN and then restarting it helped to fill up SWN_TIMESTAMPS with proper values. How does that table look after you run it?
What is SWN_SELSEN_TEST?
Chck in SLG1 to get an idea of why it's not working. You can also run SWN_SELSEN in the foreground and debug it to see exactly where and why it goes wrong. Also check ST22.
regards
Rick Bakker
hanabi technology

Runtime error in production but working in test

Hi all gurus! 
We have an interesting problem with two own developed Java DynPage components. They both have inputfields that are put in a table by a TableViewCellRenderer. The code looks like this and is pretty straight forward: 
 InputField dateField = new InputField(Constants.startDateTag); 
 // Now we set the string for inputField from the model, so that the selections 
 // already made in the tableView don't get lost 
 // Get current date 
 String dateString=tableView.getValueAt(row, column).toString(); 
 // Check if empty string 
 if(dateString == null || (dateString !=null && dateString.trim().equals(""))) 
 { 
 //Get current date 
 dateString=CalendarUtil.getCurrentDate(); 
 } 
 // Set current date 
 dateField.setString(dateString); 
 // Now we set the datatype to DATE and SHOWHELP to TRUE 
 dateField.setType(DataType.DATE); 
 dateField.setShowHelp(true); 
 dateField.setDesign(InputFieldDesign.SMALL); 
 // Set the renderer 
 dateField.render(rendererContext); 
This code gives a nullpointerexception. The error stack in the default trace points to the following row: 
dateField.setType(DataType.DATE); 
The complete error stack is at the end of the post. 
As I said in the header it works fine in test but not in production. We have copied the production database to test to eliminate the influence of erroneous data. What we found is that the components still worked in test so the data itself is not the source of the problem, which also the error message gives a hint of. 
Does anyone have an idea about what the problem could be? I have torn the little hair I still have on my head over this problem. ;) 
Best regards 
Benny 
Full Message Text 
10:59_30/03/10_0059_13822150 
[EXCEPTION] 
java.lang.NullPointerException 
at com.sapportals.htmlb.InputField.setType(InputField.java:206) 
at com.bergendahls.bgvendor.gui.TableViewCellRenderer.renderCell(TableViewCellRenderer.java:69)
at com.sapportals.htmlb.unifiedrendering.ie5.TableViewRenderer.renderTableViewCellFragment(TableViewRenderer.java:1967) 
at com.sapportals.htmlb.unifiedrendering.ie5.TableViewRenderer.renderTableViewRowFragment(TableViewRenderer.java:1522) 
at com.sapportals.htmlb.unifiedrendering.ie5.TableViewRenderer.renderTableViewFragment(TableViewRenderer.java:400) 
at com.sapportals.htmlb.unifiedrendering.ie5.TableViewRenderer.render(TableViewRenderer.java:106) 
at com.sapportals.htmlb.rendering.PageContext.render(PageContext.java:999) 
at com.sapportals.htmlb.taglib.TableViewTag.doEndTag(TableViewTag.java:139) 
at pagelet._sapportalsjsp_PriceListSearch.subDoContent(_sapportalsjsp_PriceListSearch.java:284) 
at pagelet._sapportalsjsp_PriceListSearch.doContent(_sapportalsjsp_PriceListSearch.java:45) 
at pagelet._sapportalsjsp_PriceListSearch.service(_sapportalsjsp_PriceListSearch.java:29) 
at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.service(PortalComponentItemFacade.java:360) 
at com.sapportals.portal.prt.core.broker.PortalComponentItem.service(PortalComponentItem.java:934) 
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:435) 
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:527) 
at com.sapportals.portal.prt.core.async.AsyncPortalComponentResponse.include(AsyncPortalComponentResponse.java:680) 
at com.sapportals.portal.htmlb.page.JSPDynPage.doOutput(JSPDynPage.java:76) 
at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:133) 
at com.sapportals.portal.htmlb.page.PageProcessorComponent.doContent(PageProcessorComponent.java:134) 
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209) 
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114) 
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328) 
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136) 
at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable$1$DoDispatchRequest.run(AsyncIncludeRunnable.java:375) 
at java.security.AccessController.doPrivileged(Native Method) 
at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable.run(AsyncIncludeRunnable.java:388) 
at com.sapportals.portal.prt.core.async.ThreadContextRunnable.run(ThreadContextRunnable.java:164) 
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:729) 
at java.lang.Thread.run(Thread.java:534)

Problem solved.
The reason for the error was a tricky one. The InputField was instantiated using the constructor with an Id as in-parameter. Unfortunately the Id contained special characters, an unfortunate slip of mind.
What made this error so difficult two find were two things.
First: the solution worked in Test but not in Production. One would think that the Id should create a problem in both environments or in none.
Second: after the instantiation of the inputfield it accepted inputfield.setText("..."); but then crashed at the following row "inputfield.setType(DataType.DATE);. One would have expected the component to crash at the first manipulation.
I hope this can help other persons who have made an unfortunate choice of Id.
Best regards
Benny
Edited by: Benny Lange on Mar 31, 2010 1:51 PM

BAPI works in test but not in production

3rd party software uses BAPI to input data into SAP. This works in test but not in production. We have checked that user 3rd party software uses have same rights in both systems. BAPI is standard SAP BAPI. We can connect to production with SM59.
Is there anything in SAP that could cause this?

No. Better you check with the PATCH Levels.. etc to know is there any changes in the BAPI (BASIS people can help you) > Otherwise go to SYSTEM in the MENUBAR> STATUS--> Compare the Status there
After that check the data once...
Reward if helpful...

[svn:osmf:] 14780: FMTA work + unit tests.

Revision: 14780
Revision: 14780
Author:   [email protected]
Date:     2010-03-16 09:55:23 -0700 (Tue, 16 Mar 2010)
Log Message:
FMTA work + unit tests. Added NetNegotiator unit test support. Fixed bug in constructor of Streaming URL resource.
Modified Paths:
    osmf/trunk/framework/OSMF/org/osmf/net/NetNegotiator.as
    osmf/trunk/framework/OSMF/org/osmf/net/StreamingURLResource.as
    osmf/trunk/framework/OSMFTest/org/osmf/OSMFTests.as
Added Paths:
    osmf/trunk/framework/OSMFTest/org/osmf/net/TestNetNegotiator.as

3D Tween not working in Test mode or Published version

Hi, I'm pretty much tearing my hair out with this one. I am
creating a 3d tween using the 3D rotation tool and everything looks
great when I play it on the timeline but as soon as I test or
publish the movie, the image is static, doesn't rotate and appears
in the top left corner of the movie. I've tried it on three
different computers and still have the problem so I guessit's got
to be with my process.
Draw a square
Convert the square to a movie clip
Insert a Motion Tween
On the final frame, use the 3d Rotation Tool to rotate the
square movie clip
Play the movie - square rotates, everything works fine
Test the movie - Square appears static on the screen (appears
in top left corner of movie) and does nothing
Can anyone see anything I'm missing from that process or know
of any setting that may be causing the problem. Any suggestions
would be greatly appreicated.
Thanks,
Dan

Thanks - got the file.
So, I added a third instance next to the other two just fine - it scrubs and publishes. (my steps were to take the trigger instance from the library, and I copy and pasted the motion from one of the other clips to the third instance)
So that doesn't seem to be the problem. Could you add the steps you're using where the 3D doesn't animate, or add the non-working file?
Thanks!

Facetime problem. am having issues with facetime on iphone 4. Have gone to settings and turned on facetime and it will work (have tested it and my partner can facetime me but no icon comes up on my phone and so doesnt link to any of my contacts

Facetime problem. am having issues with facetime on iphone 4. Have gone to settings and turned on facetime and it will work (have tested it and my partner can facetime me but no icon comes up on my phone and so doesnt link to any of my contacts

Oh boy! Acting kind of weird seems to be an understatement, aquaequus!
What type of troubleshooting were we able to do with you? I want to make sure that we can get some sort of resolution for this problem.
It is quite possible the battery door may get your phone in working order again. I'm not sure if the store has it in stock, but it is available in our warehouse for $14.99 which can be ordered via customer service.
Tamara H.
Follow us on Twitter @VZWSupport

ACK! Program works in testing, then when its on the net it has this Error.

My program works in testing, but when I upload it to the server, it come up with this error.
[RPC Fault faultString="Security error accessing url" faultCode="Channel.Security.Error" faultDetail="Destination: DefaultHTTP"]
at mx.rpc::AbstractInvoker/http://www.adobe.com/2006/flex/mx/internal::faultHandler()
at mx.rpc::Responder/fault()
at mx.rpc::AsyncRequest/fault()
at DirectHTTPMessageResponder/securityErrorHandler()
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at flash.net::URLLoader/redirectEvent()
I'm guessing that its this piece of code:
import mx.core.mx_internal;
Maybe not...
Any clues?

You're probably trying to load a an xml file, or calling an HTTPService, and that operation is not using the same url that your Flex app is in.

Calibration working, speaker test doe

Similar Messages

Maybe you are looking for