CALL Customer-Function '002' ... doesn't stop at the break-point...

Hi,
I've put a break point in one of the function module, which was called by such :
CALL Customer-Function '002'...
But it wouldn't stop at my break-point...
Thanks
William Wilstroth

Hi gentlemen,
I am still analysing on this issue. Will get back to everyone on this....
I suspect most likely is the naming convention in the function group and the function module is conflicting. There was an information from my colleague that there is background internal (customized) checking on the function group and fm naming convention checking...
So I will see how my analysis goes on this... that is affecting my breakpoints...
Thanks for all your help and advices..,
William Wilstroth

Similar Messages

User exit call customer function 002 is not getting trigerred

Hi
I am using the user exit call customer function 002 in the function module idoc_input_proact to trigger and idoc.my problem is that the user exit is not geting triggered.
please help me gurus as this the last day for finishing thw work.
regards,
Asish dash

it means tthat, u are applying a wrong exit in the pgm.
try to once again search for the suitable exits for your program.
try this:
how to find the customer exits for a particular transaction
check out the pgm in this thread:
Re: Find User Exits
regards,
padma

BADI BUPA_INBOUND debug not stopping at the break point

Hi Guys,
When downloading the customer master from ECC to CRM BP category type is defaulting to Organizations for type person. Am trying to change this based on a condition in the BADI BUPA_Inbound. I set a external break point in this badi but when tried to download the customer master from ECC debug is not stopping in the badi.
Could anyone please guide me to solve this issue?
Thanks,
Sundar

Praveen,
just have a look at sample code of VOFM.
Go to the routine number that needs to be copied.
Put your cursor on the routine number field that needs to be copied.
Overwrite that number with your new routine number and hit enter.
The new routine will be created as a copy of the old routine and you can modify the new routine as you need it.
Ex.
You have to copy routine 104 to 904
Routine number Description Active
104 Bill.bus.item data X
Put your cursor on 104 and then change it to 904 and hit enter.
904 will be created as a copy of 104 and you can make your changes in 904.
Don't forget to activate it after you are done.
Hope it helps.

Unable to debug an exit in CALL CUSTOMER FUNCTION 003

Hi Guys,
I have an exit EXIT_SAPMV45A_003 that is called by CALL CUSTOMER FUNCTION 003. I had placed a break point at
CALL CUSTOMER FUNCTION 003 and the debugger stops here but i am unable to debug inside this to reach into
the code in EXIT_SAPMV45A_003 even after setting the system debugging on & Update debugging
ON.
Can someone help me with this?
thanks
Dan

You have to include that Enhancement of that exit in the Project and Activate that project in the CMOD.
The Enhancement for the exit EXIT_SAPMV45A_003 is V45A0003.
Create a project in CMOD
And inclue V45A0003 in the project.
Activate the Project.
Now, it will stop at break point.
Regards,
Naimesh Patel

Call Customer Functions.

Hi All,
What does the suffix "001" indicates in the command "Call Customer Function 001" ?
What are different types of Call Customer Functions?
In the Version ECC 6.0 There are some more functions which have been added such as 003, 004, 005.
Can anyone help me out from this differences ?
Thanks & Regards,
Swamy Kunche.

Hi Swamy,
If you have seen the components (function modules) of an enhancement from transaction SMOD, you see the name of the function module is structured as
EXIT_<main_program_nnn.
This nnn takes values e.g. 001, 002 etc.
Hence when you call
CALL CUSTOMER-FUNCTION '001' ... it calls the EXIT_<main_program>_001 function module in the respective enhancement.
Basically these function modules (components) in an enhanement are called from different pre-defined in the standard program and are there for you to modify standard processing. Hence additino of more components 003 etc. means SAP has given more support for customization/enhancement.
Cheers.

Unable to set breakpoint at statement CALL CUSTOMER-FUNCTION

HI,
I am try to set break point at CALL CUSTOMER-FUNCTION , to know the exit name for VA01 screen.
But even after setting the break point it is not stopping . can anyone tell me wht could be the problem.
i am setting like this ,
1) entering '/h'
2) from menu BREAKPOINTS->BREAKPOINT AT -> STATMENT
3) Enter.
4)f8
mineis Ecc 5.0 version.
please let me know

Hi,
Here is the final answer to your problem.
CALL CUSTOMER-FUNCTION does NOT call the function module if it is not linked to an active project. Thus, a break-point in the function module will be ineffective.
So make sure you have linked it to a project.
Also refer this nice link on wiki for User Exits.
[Customer Exits (CMOD)|http://wiki.sdn.sap.com/wiki/display/ABAP/CustomerExits%28CMOD%29]
Hope this solves your problem, close the thread if it does solve.
Regards
Abhii
Edited by: Abhii on Aug 27, 2010 8:47 PM

I have an old iPhone 4 that finally stopped working. I have an unlimited data plan and want to keep it. When I called customer service, I was told like in the past that if you purchase the new phone at full price, you can keep your old plan. However, a

I have an old iPhone 4 that finally stopped working. I have an unlimited data plan and want to keep it. When I called customer service, I was told like in the past that if you purchase the new phone at full price, you can keep your old plan. However, after some time on the phone i was told by the csr and supervisor that their system is not allowing them to complete the transaction without changing to a limited data plan. I was told to try going to a store and buy the phone. Same thing happened. Has Verizon changed something and not told their employees?

Seems like people having this problem are those coming from a phone that doesn't have a nano SIM card...so when Verizon issues them one they end up changing their plan. No clue why this keeps happening but stay on top of them. As long as you initiated the request for your plan to be reinstated within the 14 day time frame they should put it back. Interested in seeing how this plays out. There is still one phone in my house that hasn't been upgraded (an iPhone 4). I'm hoping when we do upgrade it at full retail they won't mess with her unlimited data plan

Can we call custom functions in view objects?

Can we call custom functions in view objects?these custom functions are from my backing bean...
Please help.....

User,
You can certainly add code to your view objects to do whatever you like.
However, it would be considered a very bad practice to call something in the backing bean from your view object. It violates the whole MVC design principle of ADF.
Perhaps if you can share your real use case, someone will give you ideas about the best way to do it, but I, for one, would advise you to forget about calling a backing bean function from your view object.
Best,
John

Call function and call customer function

Hi
Can anybody let me know what is the difference between CALL FUNCTION AND CALL CUSTOMER- FUNCTION .
i know call customer- function is used while we r working on user exits .
but is their any specific reason of difference ...
Thanks

CALL CUSTOMER-FUNCTION function_exit parameter_list.
Effect
This statement can be used in programs delivered by SAP. It includes the function module exit specified in function_exit . The function module exit is a customer exit. In an SAP program, it enables you to call a function module provided by SAP and implemented by the customer.
The indicator function_exit must be a three-digit text field literal. A function module exit is specified by SAP using the transaction SMOD and can be activated using the transaction CMOD in customer systems.
Specifications by SAP
An empty or partly implemented function module must be assigned to the function module exit using the transaction SMOD. The name of the function module consists of EXIT_, the program name, which contains the statement CALL CUSTOMER-FUNCTION, and the three-digit indicator in function_exit. The interface of the function module is completely defined by SAP.
Activation in the customer system
The transaction CMOD enables the customer to implement the source code of the function module within an enhancement project and to activate the function module exit. If the function module exit is not activated, the statement CALL CUSTOMER-FUNCTION is ignored. If the function module is activated, the corresponding function module is called in the same way as the general function module call.
Syntax and meaning of the parameter_list for the assignment of the actual parameters to formal parameters and for the exception handling are the same as in a general function module call. It is not possible to dynamically fill the interface.
CALL FUNCTION func
Syntax
CALL FUNCTION func { parameter_list
| parameter_tables }.
Effect
This statement calls the function module specified in func. The identifier func must be a character-type data object, which contains the name of a function module in uppercase letters during the statement execution. Each function module of an SAP system has a unique name, which is why you need not specify the function group.
Use additions parameter_list or parameter_tables (as of release 6.10) to statically or dynamically assign actual parameters to the formal parameters of the function module and return values to the non-class-based exceptions.
Note
If the name of a function module is specified by a constant or as a literal, the extended syntax check can check the statement.
Exceptions
Catchable Exceptions
CX_SY_DYN_CALL_ILLEGAL_FUNC
Cause: The called function is known but not active.
Runtime Error: CALL_FUNCTION_NOT_ACTIVE
Cause: The called function is unknown.
Runtime Error: CALL_FUNCTION_NOT_FOUND
CX_SY_DYN_CALL_ILLEGAL_TYPE
Cause: The type of the actual parameter does not fulfill the requirements of the function interface.
Runtime Error: CALL_FUNCTION_CONFLICT_GEN_TYP
Cause: The actual parameter does not have the length expected by the function.
Runtime Error: CALL_FUNCTION_CONFLICT_LENG
Cause: The actual parameter does not have the type expected by the function.
Runtime Error: CALL_FUNCTION_CONFLICT_TYPE
Cause: Only those functions can be called in the update task that are intended for it.
Runtime Error: CALL_FUNCTION_NO_VB
Cause: An actual parameter does not fulfill the alignment requirements of the respective formal parameter.
Runtime Error: CALL_FUNCTION_WRONG_ALIGNMENT
CX_SY_DYN_CALL_PARAM_MISSING
Cause: The function expects a parameter, which has not been passed by the caller.
Runtime Error: CALL_FUNCTION_PARM_MISSING
CX_SY_DYN_CALL_PARAM_NOT_FOUND
Cause: The caller has passed a parameter, which is not known to the function.
Runtime Error: CALL_FUNCTION_PARM_UNKNOWN
plz reward points if it helps

Movie after playing doesn't stop at the last frame.

Movie after playing doesn't stop at the last frame but goes back to frame one. Movie stops normaly when played on iMac but makes trouble when placed in the iBooks Author. That's not eve problem of looping (repeat none). Help, this makes me mad.

laura4life
You have fragments (leftovers) beyond the end of the Timeline content that you intended.
I am going from an Elements Windows workspace, so please translate into Mac accordingly.
Expand your Timeline content to the maximum with the Zoom Out Zoom In slider above the Timeline.
Press the End key of the computer keyboard. That should take the Timeline Indicator to the fragments which must be deleted.
Explore all the tracks in that area.
Repeat the End key press until the Timeline Indicator stops at the end of the intended Timeline and not some 3 hours afterward.
What you find at "end of track" could be fragments or files that you moved out of the way of the active project and forgot were there.
The fragments typically present as thin vertical black lines scattered about the tracks.
Please let us know the outcome.
Thank you.
ATR

When I try to watch a video, the video gets all blurry and mixes with the other pages I'm using, and it doesn't stop throughout the video..what should I do?

When I try to watch a video, the video gets all blurry and mixes with the other pages I'm using, and it doesn't stop throughout the video..what should I do?

Hello Gemese,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning audio issues:
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

When I use Call Library Function Node in real time, is the DLL loaded once for all or load every time it is called?

When I use Call Library Function Node in real time, is the DLL loaded once for all or load every time when it is called?
I have a time critical real time application, in which I use a piece of DLL function developed by C++. It is OK? Could any senior developer assure me?
Thank you in advance.
Solved!
Go to Solution.

qing_shan61 wrote:
When I use Call Library Function Node in real time, is the DLL loaded once for all or load every time when it is called?
Once
qing_shan61 wrote:
I have a time critical real time application, in which I use a piece of DLL function developed by C++. It is OK?
OK
Be sure that all DLL calls are thread safe (do not perform calls in UI thread).
Also for real-time application you need real-time OS.
Andrey.

Can't Download ITunes or QuickTime, Download stops at the same point

Hi, i have a problem: when i try to upgrade to Itunes 10.1 through Apple Software Update( but also when i've tried to do directly through Apple site ) , the download starts but it stops all the times at the same point ( just 7,50MB ... ). I've tried everything: i changed my firewall options, i've disabled Norton Smart Firewall, i've uninstalled Itunes and ALL Apple Components in EVERY folders then i've re-installed it using a itunes.exe taken from another computer (because ANY apple download is not possible through my computer, i don't know why, but before everything worked! ), but nothing.... Download stop at the same point.
PLEASE HELP ME!!!
(Sorry for my bad english and sorry if i'm in wrong discussion, but i've not found nothing similar to my issue )

No, i can't download ANYTHING, neither through Apple site nor through the Itunes software upgrade. Neither just Quicktime nor just ITunes. Both downloads stop and freeze after few MB. I'm going crazy to find why all this happening to me..... Maybe it's because i've installed another application and now it goes in conflict with iTunes?!? ( two months ago i've downloaded new codecs audio and video with K-Lite Codec Pack, plus Media Player Classic, but during installation i've lefted mp4 files association with iTunes ).

Issue with calling custom function in merge command -10g

Hi,
I have ran into issue while calling a custom function in merge command.
It throws error 'Invalid identifier'. Oracle doesnt understand that it is a function and take the function name as column name.
Since no such collumn name exists, it throws 'Invalid identifier'.
Interestingly, merge command works fine when it has a oracle function (replace, decode).
The oracle version is 10.2.0.3
It is very urgent.
Any pointers will be helpful.
Regards,
Ravi

I don't have privileges to create dblink, but this is working for me.
So, i don't think function can be a issue here.
satyaki>
satyaki>select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
PL/SQL Release 10.2.0.1.0 - Production
CORE    10.2.0.1.0      Production
TNS for Linux: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
Elapsed: 00:00:01.02
satyaki>
satyaki>
satyaki>create table hist_tab
2     as
3       select * from emp
4       where sal between 2000 and 4000;
Table created.
Elapsed: 00:00:00.09
satyaki>
satyaki>select * from hist_tab;
     EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM     DEPTNO JOB1      DOB
      7844 TURNER     SALESMAN        7698 08-SEP-81       2178          0         30 SALESMAN
Elapsed: 00:00:00.00
satyaki>
satyaki>
satyaki>update hist_tab
2     set mgr = 7794;
1 row updated.
Elapsed: 00:00:00.01
satyaki>
satyaki>commit;
Commit complete.
Elapsed: 00:00:00.00
satyaki>
satyaki>select * from hist_tab;
     EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM     DEPTNO JOB1      DOB
      7844 TURNER     SALESMAN        7794 08-SEP-81       2178          0         30 SALESMAN
Elapsed: 00:00:00.00
satyaki>
satyaki>
satyaki>
satyaki>
satyaki>create table tran_tab
2     as
3       select * from emp
4       where sal between 2000 and 7000;
Table created.
Elapsed: 00:00:00.00
satyaki>
satyaki>select * from tran_tab;
     EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM     DEPTNO JOB1      DOB
      7844 TURNER     SALESMAN        7698 08-SEP-81       2178          0         30 SALESMAN
      7902 FORD       ANALYST         7566 03-DEC-81    5270.76                    20 ANALYST
Elapsed: 00:00:00.00
satyaki>
satyaki>ed
Wrote file afiedt.buf
1 create or replace function fun(c_in number)
2     return number
3     is
4       c_out number(4);
5     begin
6       if c_in < 7900 then
7          c_out := 0;
8       else
9         c_out := 1;
10       end if;
11       return c_out;
12*    end;
13 /
Function created.
Elapsed: 00:00:01.00
satyaki>
satyaki>merge into hist_tab o
2 using (
3     select empno,
4            ename,
5            job,
6            mgr,
7            hiredate,
8            sal,
9            comm,
10            deptno,
11            job1,
12            dob
13     from (
14              select k.*,
15                     rank() over(order by fun(k.empno)) rn
16              from tran_tab k
17          )
18     where rn = 1
19     ) n
20 on ( o.empno = n.empno)
21 when matched then
22    update set o.ename = n.ename,
23               o.job = n.job,
24               o.mgr = n.mgr,
25               o.hiredate = n.hiredate,
26               o.sal = n.sal,
27               o.comm = n.comm,
28               o.deptno = n.deptno,
29               o.job1 = n.job1,
30               o.dob = n.dob
31 when not matched then
32    insert(
33            o.empno,
34            o.ename,
35            o.job,
36            o.mgr,
37            o.hiredate,
38            o.sal,
39            o.comm,
40            o.deptno,
41            o.job1,
42            o.dob
43          )
44    values(
45            n.empno,
46            n.ename,
47            n.job,
48            n.mgr,
49            n.hiredate,
50            n.sal,
51            n.comm,
52            n.deptno,
53            n.job1,
54            n.dob
55          );
1 row merged.
Elapsed: 00:00:00.03
satyaki>
satyaki>select * from hist_tab;
     EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM     DEPTNO JOB1      DOB
      7844 TURNER     SALESMAN        7698 08-SEP-81       2178          0         30 SALESMAN
Elapsed: 00:00:00.00
satyaki>You can check the final output with old output. It is working perfectly - i guess.
Regards.
Satyaki De.

Can we Call Custom function in Background? VERY URGENT

Hi All,
Can one one tell me can we call a custom function module in background. Is it possible or not. If yes plz tell how.
In the custom function module I am updating a data base table using UPDATE statement. Can help me on this issue.
Thanks
Yathish

Hi,
1)
Yes..You can call a customer function module in BACKGROUND ...
Steps
1 Make the custom FM as remote enabled..
2 CALL FUNCTION 'ZFUNC' IN BACKGROUNG TASK
2) Yes..You can write UPDATE statement..
Thanks,
Naren

CALL Customer-Function '002' ... doesn't stop at the break-point...

Similar Messages

Maybe you are looking for