Call function in background task... How to get the result?

I want to use Call function in background task parameter.
But I cannot find the result of this function. (No export parameter, no table result, no exception)
How to get the result of this function module? Correct or not?

Hi Heinz,
You can check the result in SM58 transaction.
For more information pls. refer this thread :
No IMPORTING parameters allowed in CALL FUNCTION IN BACKGROUND TASK
Best regards,
Prashant

Similar Messages

Save Order - Call function in background Task

Hi all,
I have written a function module which is called in order save Badi and copies the system status on the Master contract to the sub contracts.
This works fine but when I call this function in background task the status is not getting copied over.For testing I have created a program similar to function module and scheduled that in background and this was working as required.
Can someone please let me know if I missed out anything or how can i resolve this issue.
Any inputs in this regard would be very helpful.
Thanks and regards,
Vijay

Hi Heinz,
You can check the result in SM58 transaction.
For more information pls. refer this thread :
No IMPORTING parameters allowed in CALL FUNCTION IN BACKGROUND TASK
Best regards,
Prashant

Af:query - How to get the result rowsets

Hi,
I have a requirement where i need to search the db rows on and append the results the adf rich table on each search.
For this i am using af:query component. And trying to get the result rows for the named criteria.
String mexpr = "#{bindings.DestinDescVOCriteriaQuery.processQuery}";
processMethodExpression(mexpr, queryEvent, QueryEvent.class);
ViewCriteriaManager vcm = getDestinDescViewObj().getViewCriteriaManager();
ViewCriteria vc = vcm.getViewCriteria("DestinDescVOCriteria");
getDestinDescViewObj().applyViewCriteria(vc);
AdfFacesContext adfFacesContext = AdfFacesContext.getCurrentInstance();
adfFacesContext.addPartialTarget(tblDestinDesc);
However on each click of search the rows searched in the previous attempt are not retained.
Can anyone let me know how to get the result from named criteria and append it the table?
Thanks
Ajay

Can anyone help?

How can i do with labview program,when i have 20 different values,and 1 want to add it with constant value.and how to get the results?

how can i do with labview program,when i have 20 different values,and 1 want to add it with constant value.and how to get the results?

Why do the 20 values have to be different? The same code should work even if some are equal.
What do you mean by "get the result"? The result is available at the output terminal and all you need is a wire to get it where you need it. That could be an indicator, another operation, or even a hardware device.
What is the data type of the 20 values? An array? A cluster? A bunch of scalars? A waveform? Dynamic data?
LabVIEW Champion . Do more with less code and in less time .

How to get the results for given Bind Variable

Hi
Can any one help me how to get the result rows from the View Object after executing the view object query by setting bind variable?
snippet as follows
viewObject.setNamedWherClauseParams("name","hei");
viewObject.executeQuery();
How to get the results from viewObject is my question..?
Thanks in advance

Should be something like
while (vo.hasNext()){
Row r = vo.next();
r.getAttribute....
You might want to read the "most commonly used methods" appendix in the ADF Developer Guide.

Call Function in Background Task

Hi all,
I have written a method in which I call a function in background task, I would like to perform a task after the function has ended succesfully. this is possible with the addition PERFORMING 'next_task' ON END OF TASK.
This is sadly not possible in a global class.
How can I get info back on the state of the function in the background?
greetings Fred.

Hi,
   try using export import statement in FM
   call function ...
    flay = 'Y'.
    export flag to memory id 'TESt'
   endfunction
    import flag from memory id 'TEST'.
    if flag = 'Y'.
      perform next_task.
      endif.
Regards
amole

How to get the results in one line

Hi
if i use the script below i get the name of path and then : and in next line i get the results.is there a way to get the results from every path after the : and not in the next line?
another question - is there a way that the script will not show the server name on every path?
(Get-Counter -ListSet LogicalDisk).PathsWithInstances | Get-Counter
THC

If you take you script and pipe it to get member, it will give you a list of various script properties.
(Get-Counter -ListSet LogicalDisk).PathsWithInstances | Get-Counter | get-member
You will see that the object type returned by "Get-Counter" is Microsoft.PowerShell.Commands.GetCounter.PerformanceCounterSampleSet.
TypeName:
Microsoft.PowerShell.Commands.GetCounter.PerformanceCounterSampleSet
Name MemberType Definition
Equals Method bool Equals(System.Object obj)
GetHashCode Method int GetHashCode()
GetType Method type GetType()
ToString Method string ToString()
CounterSamples Property Microsoft.PowerShell.Commands.GetCounter.Perfo...
Timestamp Property datetime Timestamp {get;set;}
Readings ScriptProperty System.Object Readings {get=$strPaths = ""...
You can try grabbing different properties, and they will print out differently, displaying the data on the same line in some cases. For example, pipe your output to a "foreach-object" block, and then for each object print out the CounterSamples property.
(Get-Counter -ListSet LogicalDisk).PathsWithInstances | Get-Counter | foreach-object { ($_).CounterSamples }
This should all print on one line now. However, you also asked if there was a way to not have the server print out on every line. The way to control the format of these outputs is to use the "format-table" cmdlet. So you would pipe your output to format-table
and then give it various options. This is how you would pipe it (without any options).
(Get-Counter -ListSet LogicalDisk).PathsWithInstances |
Get-Counter | object { ($_).CounterSamples | format-table }#OR USE YOUR ORIGINAL CODE(Get-Counter -ListSet LogicalDisk).PathsWithInstances |
Get-Counter | format-table }
Now, it's up to you to give format-table the options you want. With no options, output will look unchanged. To see what options are available to you, use get-help.
get-help format-table
I hope this helps!
Thank for all the info...

DbGetQuery = How to get the results to display?

I am using the following
sqldata <- dbGetQuery(con," select sysdate from dual")
How do I get the result to display?
summary(sqldata) displays the values
if I do dbSendQuery then fetch show the results
help(dbSendQuery) and help(dbGetQuery) go to the same page! dbSendQuery
The documentation says dbGetQuery will connect, get the records and clear; maybe the clear happens before the display?!

Hello Amin,
Here is the way to display the result from the query you provided:
Assign the result of the query to object 'sqldata':
R> sqldata <- dbGetQuery(con," select sysdate from dual")
Type the object name at the R prompt:
R> sqldata
SYSDATE
1 2014-04-28 14:45:14
Sherry

How to get the result set in batches

I have a query which results into large data. This data i want to display in a group of 20. After every 20 records i want to add header and footer to it.
Is it possible to get the result set data into batch of 20 ? means can i specify start and end index of query ?
regards
Manisha

What I am saying is that a big query with lots of
joins will probably be slow, and as such would be a
ripe candidate for batching the responses, if it were
not possible to speed/optimize it. Batching is nice
to look at for the user, but is not a solution for
performance problems. In essence it is irrelevant
that it adds a little performance deficit, as it
appears to be running a lot quicker, and gives more
feedback to the user.Then let me say it again....
- "Join" is a term that applies to a method of doing queries in the database....
- Query 1 which uses a join and returns 15 rows
- Query 2 which does not use a join and returns 1500 rows.
Given the above then Query 1 will provide better overall performance for the system than Query 2 in a properly configured database.
If it doesn't then the database is not set up correctly.
And again this will be irrespective of whether the query is scrollable or not.

How to get the result of a method on a page

I use JDeveloper 11g
I want the result of a method (String) in the ApplicationModule on a page (jspx)
What I have done is:
1. make a method (getValue) in the ApplicationModule Algemeen (also in Client interface)
2. make a pagedef-file with executables and bindings, see
<executables>
<invokeAction id="doGetValue" Binds="getValue"
Refresh="renderModel"/>
<variableIterator id="variables" Refresh="renderModel">
<variable Type="java.lang.String" Name="getValueReturn"
IsQueriable="false" IsUpdateable="0"
DefaultValue="${bindings.getValue.result}"/>
</variableIterator>
</executables>
<bindings>
<methodAction id="getValue" RequiresUpdateModel="true"
Action="invokeMethod" MethodName="getValue"
IsViewObjectMethod="false" DataControl="AlgemeenDataControl"
InstanceName="AlgemeenDataControl.dataProvider"
ReturnName="AlgemeenDataControl.methodResults.getValue_AlgemeenDataControl_dataProvider_getValue_result"/>
<attributeValues IterBinding="variables" id="ValueReturn">
<AttrNames>
<Item Value="getValueReturn"/>
</AttrNames>
</attributeValues>
</bindings>
3. on the page (jspx) I have an outputText-component:
<h:outputText value="#{bindings.ValueReturn.inputValue}"/>
But, it does not work, I don't get the result of the method on the screen.
Who can help me with this?

Hi,
Simple example below:
Suppose you have this method in AppmoduleImpl:
public void testHello( ) {
return "Hello";
1.After you expose this to clientInterface,drop this method on the jspx page as ADF Parameter
form
2.Drop the return String as outputText
3.Run the page,click on the commandButton & the outputText returns 'Hello'
Regards,
Shantala

How to get the resulting XML as string

Hello,
I think my question is very simple but i'm new in this area.
What i'm try to do is to parse a XML document with the DOM parser. Then i manipulate the DOM tree. After finishing the process i want to get the resulting XML document as an InputStream to give to another application for storing back into the database.
Until know i print the resulting XML to System.out or I write it to a file.
Do you know where i can find more information about this? Sample code??
Thanks!

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Jinyu Wang ([email protected]):
You can try following code. It is not the simplest way, but it works for me:
// Print to temp buffer
ByteArrayOutputStream baos = new ByteArrayOutputStream();
DataOutputStream output = new DataOutputStream(baos);
Xml_doc.print(output);
String outtemp=baos.toString();
System.out.println(outtemp);
include following line for the lib:
import java.io.*;<HR></BLOCKQUOTE>
Many thanks for the reply. It works!

CALL FUNCTION IN BACKGROUND TASK - enable tRFC

Hi Experts,
I want to call a Remote Function module 'IN bACKGROUND TASK' and get the status in SM58 within the same AS. Kindly help me to do this.
Requirement is to call the remote function module asynchronously in a guarentied way.
Thank you
Nikhil

The scenario works fine for me. The issue was unable to create a proper test condition in the RFC.
CALL FUNCTION 'ZMY_RFCASYNC'
   IN BACKGROUND TASK
   EXPORTING...
   TABLES...
   EXCEPTIONS...
Simulated error condition in 'ZMY_RFCASYNC'
and got entry in SM58 by simply making an exception.
Thank you all.

Call function IN BACKGROUND TASK don't work

Hello,
I've a interface RFC to JDBC asyncronous.
When i call function in R3 (IN BACKGROUND TASK), sy-subrc = 0, however i don't see any message in SXMB_MONI and runtime workbench.
The CC sender (for RFC) is OK,
what happen?
thanks very much

Have this code after your call function:
CALL FUNCTION 'START_OF_BACKGROUNDTASK'
     EXPORTING
          STARTDATE = SY-DATUM
          STARTTIME = TIME
     EXCEPTIONS
          OTHERS    = 1.
IF SY-SUBRC = 1.
EXIT.
ENDIF.
COMMIT WORK.
Also, if you want to call your RFC function module in async mode, you can try
Call function '<fm name>' in update task....
Regards,
Ravi Kanth Talagana

Facing issue with tRFC (CALL FUNCTION in BACKGROUND TASK DESTINATION

In transcation CJ20N there is aBADI call ZCL_IM_CL_IM_PROJ_UPDATE in which there is a method
IF_EX_PROJECTDEF_UPDATE~AT_SAVE. My requirement is that when the status of the project is changed and saved then after the SAVE some actions are to be performed (BDC for transcation CJ30 & CJ9FS are to be called).
Since this method is called AT SAVE and i need to call the bdc after the comit (of SAVE) is done. So I have made a RFC FM in which I am calling the bdc. and then calling the FM as
CALL FUNCTION <FM> in BACKGROUND TASK DESTINATION <sy-sysid>.
For the txn. CJ9FS bdc this method is working fine and bdc is called after SAVE but for txn. CJ30, at times,the bdc is not working though if I run the BDC FM seperately using SE37 then its working fine.
Can any body guide me where I am going wrong.

The scenario works fine for me. The issue was unable to create a proper test condition in the RFC.
CALL FUNCTION 'ZMY_RFCASYNC'
   IN BACKGROUND TASK
   EXPORTING...
   TABLES...
   EXCEPTIONS...
Simulated error condition in 'ZMY_RFCASYNC'
and got entry in SM58 by simply making an exception.
Thank you all.

Human Task: how to get the participant name in the task form?

HI All,
I am using SOA Suite 11.1.1.6 in the current project. For a human task, there are multiple participating groups. For each participant, the payload is different. Currently, we are calling Human Task multiple times to pass the payload. However, I like to take advantage of new features in 11g Human task. I like to setup multiple groups as parallel. Then, jsf page can selective display corresponding parts of the payload for different partidipants. The problem is how JSF can get the name of the participant when page is invoked?
Thanks in advance,
Steven

Hi,
Variants are stored in table VARI and VARID.
You can use RS_ALL_VARIANTS_4_1_REPORT to get all the variants for a report program.
please check out the link below it will be helpful to you
Re: Programs for a transaction variant
Hope this helps.
ashish

Call function in background task... How to get the result?

Similar Messages

Maybe you are looking for