Call report selection screen in module pool program with tab strip control

Hi,
Could anyone explain in detail to call report selection screen in module pool program with tab strip control.
Thanks
Mano

Hi,
Refer std program:
demo_sel_screen_in_tabstrip.
demo_sel_screen_with_tabstrip.
Call your program with SUBMIT stmt form module program.
Reward points if this Helps.
Manish

Similar Messages

  • Selection screen in module pool programming..

    hi,
    I designed some screen elements for KUNNR and MATNR and handled their value selection thru POV request.
    I want to select data from my table using these values. Will a simple select statement with AND condition on these values work ? I doubt as even if the user does not enter value for one of these, my select is giong to fail. for e.g. he enters value for KUNNR but not for MATNR.
    If that is so then shud i need to design a screen which must display select options like for KUNNR, MATNR etc ? if yes then the value that is displayed there when user selects F4 must be controlled by me. how to design this in module pool ?? where to write statements related to selection screen definition and how to handle its selection ?
    thks

    it is possible.
    I am involved in this topics check my post for one method .
    https://forums.sdn.sap.com/click.jspa?searchID=14529204&messageID=1412188
    https://forums.sdn.sap.com/click.jspa?searchID=14529204&messageID=1501162
    in the above post there is alternative by Rich. that is simple and easy.
    Regards
    Vijay Babu Dudla

  • Selection- screen in module pool

    hi all,
            how to create selection screen in module pool programing,
    in screen attributes of module pool, 4 screens are present, but selection screen radio button has been disabled.
    how to work by using selection screen radio button.
    Regards
    Suprith

    HI Suprith,
    You ll find a LAYOUT button on the application tool bar just click that button sceen painter sceen will be opend there you have to design your selection screen. Letf side of the sceen painter you see the options use the options as per your requiment and activate . If you  are using module pool program go to SE93 create the t-code and give the program name and the screen name which you have created in se51.
    hope this will help you...
    reward if useful
    regards,
    sunil kairam.

  • How to create select-options in module pool program

    Hi
    i am structed at this point could you please tell me
    how to create select-options in module pool program

    Steps to get SELECT-OPTIONS in module pool programs.
    <li>. Start one dialog program with SAPZ_TEST.
    <li>. Place the below code in the TOP include of the dialog program.
    PROGRAM SAPMZ_TEST.
    TABLES mara.
    SELECTION-SCREEN BEGIN OF SCREEN 2100 AS SUBSCREEN.
    SELECT-OPTIONS: matnr FOR mara-matnr.
    SELECTION-SCREEN END OF SCREEN 2100.
    <li>. Create one screen 2000 .
    <li>. Go to Layout of the screen and Define subscreen area on the screen and Name it as g_subscreen.
    <li>. Place the below code in the Flow logic of the screen.
    PROCESS BEFORE OUTPUT.
      CALL SUBSCREEN g_subscreen INCLUDING 'SAPMZ_TEST' '2100'.
    PROCESS AFTER INPUT.
      CALL SUBSCREEN g_subscreen.
    <li>. Activate all.
    <li>. Create Transaction code for the dialog program SAPZ_TEST.
    <li>. Execute the transaction code. You will see the select-option like we see on Selection-screen.
    I hope that it gets u clear idea.
    Thanks
    Venkat.O

  • How to cal selection screen in module pool

    Hi abapers,
    I have to use selection screen in module pool programme..How to call selection screen in module pool.
    Regards,
    ramya

    YOU HAVE TO DEFINE YOUR SELECTION SCREEN LIKE THIS
    SELECTION-SCREEN BEGIN OF SCREEN 123 AS WINDOW TITLE TEXT-456.
      SELECTION-SCREEN BEGIN OF BLOCK BL1 WITH FRAME TITLE TEXT-BL1
                                          NO INTERVALS.
        SELECT-OPTIONS SEL1 FOR SY-SUBRC.
        PARAMETERS     PAR1 LIKE SPFLI-CARRID.
        SELECTION-SCREEN COMMENT /10(20) TEXT-COM.
      SELECTION-SCREEN END OF BLOCK BL1.
    SELECTION-SCREEN END OF SCREEN 123.
    SELECTION-SCREEN ULINE.
    SELECTION-SCREEN BEGIN OF SCREEN 99.
      SELECTION-SCREEN PUSHBUTTON 15(25) PUBU
                       USER-COMMAND US01.
      SELECT-OPTIONS SEL2 FOR SPFLI_WA-CONNID.
      PARAMETERS     PAR2 TYPE I.
    SELECTION-SCREEN END OF SCREEN 99.
    THEN YOU HAVE TO CALL THAT
    CALL SELECTION-SCREEN scr.
    AFTER THAT YOU CAN CALL THE ANOTHER SCREEN..
    CALL SCREEN..
    REGARDS
    SHIBA DUTTA

  • Is it possible to print the current screen in Module pool program(Dynpro)?

    Is it possible to print the current screen in Module pool program(Dynpro)?
    I create a Module pool program , and customer hope can print the screen when they click print button, Is it possible?

    Does the customer want a screen shot or what? Please elaborate on your requirement.
    Maybe you should create a smartform first, which is called when one clicks on print button. But in fact, we need a bit more info than this.

  • Uploding sub screens in module pool programs

    HI,
       Can any one help in uploading sub screens in module pool program .
    Regards,
    Mahendra.

    Hi
    Debugging of module pool is same as reports, use /h or put breakpoint
    but u shud know what u want to check
    there are generally two event used in module pool
    PBO
    This event is used before displaying the screen,It is used to clear fields table, show table control, tabstrip and most important conditionally modify the scrren .
    PAI
    is used to validate the fields which are entered on the screen with database values and then fetch records from table.
    i mean all values to make available in internal table
    now u would be sure which part u want to debug.
    <REMOVED BY MODERATOR>
    Regards,
    Chandru
    Edited by: Alvaro Tejada Galindo on Feb 19, 2008 6:19 PM

  • How to take backup of an entire module pool program with code,screen,etc.

    Hi experts,
    I have some important data in the ides server for which i want to take backup of them.
    I have some question regarding the same.
    1.How to take backup/download of an entire module pool program with code,screen,etc.
    2.How can we take backup/download for a DB table with its structure?
    3.How can we take backup of a search help?
    Please give some suggestions abt the same.
    Regards,
    Ashesh.

    Hi,
    May be just for viewing, try downloading from SE80 transaction from the others option.
    Here just try issuing the print, it will generate the spool.
    Now using the spool, download to your desktop as required. It will have all the information regarding the attributes, fields, elements everything.
    The only issue is, may be you need to take all the screens separately.
    Regards,
    Santhosh.

  • Making a screen in module pool program web based

    I have developed a module pool program with screens and flow logic. I want to make that application web based. Is there any option to make it web based or I have to write the fresh application in bsp. Please suggest

    Sucheta,
    You unfortuantely need to re-write that application as BSP.  If you separated your business logic from the screen logic, then all you will need to do is rewrite the screen logic and not the whole application.
    Take care,
    Stephen

  • How to provide select-option in module pool programming

    Hi all,
    How to provide select-option in module pool programming.
    If any body knows let me immediately.
    Thanks
    sudheer

    Hi Sudheer,
    Unfortunately there is no standard way of having a select-option in a module pool program.
    What you can try is having two fields and creating a range in your program and populating the range at runtime with respective value and trying to simulate some functionality of the select-option.
    Hope it helps.
    Thanks, Debasish

  • How can i declare a selection screen in a DP program with transaction code.

    hi friends,
    How can i declare a selection screen in a DP program with transaction code. What are the events and flow logic..

    Search in SCN/Google for Module-pool programming basics.

  • Select option in module pool program

    Hi,
    I have develop a module pool program. In one of the screen i need select option. so do any one have idea or approach for it.
    Thanks in advance.

    Hi,
    try the following code
    tables : mard.
    data : ok_code_100 type sy-ucomm.
    selection-screen begin of screen 1010 as subscreen.
    selection-screen begin of block b1 with frame title text-001.
    select-options: s_werks for mard-werks,
    s_lgort for mard-lgort.
    parameters : p_var like disvariant-variant.
    parameter: p_rb1 radiobutton group rd1 default 'X', " list
    p_rb2 radiobutton group rd1. " grid
    selection-screen end of block b1.
    selection-screen end of screen 1010.
    start-of-selection.
    CALL SCREEN 100.
    *& Module STATUS_0100 OUTPUT
    text
    module status_0100 output.
    set pf-status 'Z11_SUBMIT'.
    set titlebar 'CALL'.
    endmodule. " STATUS_0100 OUTPUT
    *& Module USER_COMMAND_0100 INPUT
    text
    module user_command_0100 input.
    case ok_code_100.
    when 'EXIT'.
    leave program.
    when 'SUBM'.
    submit z11_ap_alv_mat using
    selection-screen '1000'
    with s_plant in s_werks
    with s_stor in s_lgort
    with p_var = p_var
    with p_rb_01 = p_rb1
    with p_rb_02 = p_rb2
    and return.
    endcase.
    endmodule. " USER_COMMAND_0100 INPUT
    here u have to design a subscreen area SUB_1010 in the screen painter, there is a option given there for that.
    and also in the flow logic of screen 0100 you have to call the subscreen SUB_1010 both in PBO and PAI like :
    process before output.
    module status_0100.
    call subscreen sub_1010 including sy-repid '1010'.
    process after input.
    call subscreen sub_1010.
    module user_command_0100.
    reward if helpful

  • Select-options in module pool programming

    hi,
       I need to have four fields as part of my layout that are select-options fields with multiple values entry options. Since layout doesnt have 'select-options" functionality, i defined it from the module pool program, ie: I wrote a  selection screen in the PBO module. The problem is if i make any changes to the code, the layout changes back to the previuos format.
    Is there any way in which i can combine selection-screen logic with my layout.
    Thanks,
    Sruthy

    HI
    GOOD
    Selection Screen Version
    Only for Executable Programs
    If you do not specify a selection screen version, the system automatically creates a selection screen based on the selection criteria of the logical database and the parameters and select-options statements in the program.
    If you want to use a different selection screen of the logical database, enter a number in this field. The number must be smaller than 1000 and correspond to an additional selection screen of the logical database. The possible values help displays a list of available selection screens. You can also look in the selection include of the logical database (program DBxxxSEL, where xxx is the name of the logical database).
    Tomislav
    1. In the top include define the selection screen with
    selection-screen begin of screen 9250 as subscreen.
    SELECT-OPTIONS analyt FOR ztv_cc02-zd_mumla .
    selection-screen end of screen 9250.
    2. Using the screen painter create a subscreen area in
    the main screen where you want to have this.
    3. Then, in the screen flow logic code as follows:
    PROCESS BEFORE OUTPUT.
    MODULE STATUS_1000. etc
    call subscreen SUB1 including 'PROGRAM NAME' '9250'.
    PROCESS AFTER INPUT.
    module exit at exit-command. etc.
    call subscreen SUB1.
    THANKS
    MRUTYUN

  • Displaying Data Using Selection-screen in Module Pool

    Hi All,
    Currently I'm working on a module pool program.In that i'm having two screens 9000 and 9001.
    I want to select a bookrefno using a selection screen and display header & table control data in 9001 screen when the bookrefno is validated.
    can anyone help me sending sample code regarding this
    Regards
    Ravi S

    Hi Ravi
    Place "bookrefno." field on screen 9000.
    Use validations on that particular field by using chain-endchain.
    in PAI of 9000
    case sy-ucomm
    when 'display'
    call screen 9001
    write select statment to display data i.e header & table control in 9001 .
    hope this would solve your problem.
    reward points, if its helpful.
    Thanks
    RK Nimma

  • Problem in Select-option in Module Pool Programming

    Hi,
    I'm making one module pool programming. In that, I've to make select-option. For that I'm using this command --
    1) In PBO --
    CALL SUBSCREEN sub INCLUDING 'YBOE_PRINT' '5100'.
    2) In PAI --
    CALL SUBSCREEN sub.
    But, Syntax Error is generated as below --
    "." or "ID.........FIELD" expected after "SUBSCREEN"
    Please suggest.
    Thanks.
    Kumar Saurav.

    Hi Ramchander,
    Thanks for replying. But, even if I changed Prog_Name with term 'repid', that same error regarding
    "." or "ID ... FIELD ..." expected after "SUBSCREEN"
    is coming up.
    I guess, there is any step missing.
    Lemme describe what I'm doing in points --
    1) I declared SELECTION-SCREEN with screen no --
    SELECTION-SCREEN BEGIN OF SCREEN 5100 AS SUBSCREEN.
          PARAMETERS : p_bukrs TYPE ekko-bukrs OBLIGATORY DEFAULT '1000'.
          SELECT-OPTIONS: kunnr FOR kna1-kunnr.
          select-options: gjahr for bsid-gjahr.
          select-options: bank for bsed-bank.
          select-options: budat for bsid-budat.
          SELECTION-SCREEN END OF SCREEN 5100.
    2) Then I made a call in PBO as given above.
    3) Finally, a call to that subscreen is made in PAI - again as given above.
    When I checked that, this gave the error.
    Are you looking any erroneous step ...?
    Please guide.
    Thanks.
    Kumar Saurav.

Maybe you are looking for

  • Values not getting updated in table mvke

    Hi, I am working on a module pool program.In the o/p screen there are many records.If the user wants to change the field values of a particular record,he clicks on the checkbox besides that record and when he click on the change button,control goes t

  • Document Type for invoice reduction

    Good day,  the SAP Library mentioned of invoice reduction due to price variance.  We use txn MIRO for invoice verification,  following process as in SAP library;  when posting error occured No separate type exist for invoice reduction.  When adding t

  • Error in activating ODS--Most Urgent

    Hi Experts, I am facing error when activating ODS. THe load was succesfull and activation failed. when i checked in RSMO detail screen all the data packets are green but under subsequent processing it shows following error message "Error when assigni

  • Can't add Delegates to Calendar in Mountain Lion

    Hi Since updating to Mountain Lion i have been unable to add delegates into Calendar.  Previously this was easy preferences- delegates- type in the first part of the name and it found the delegates. Now i type in the name and nothing happens - there

  • SSRS Connecting to PDW

    I'm creating a report that queries the PDW. Using Visual Studio 2012 Reporting Services 2012 integrated in Sharepoint 2013 Trying to use the Microsoft SQL Server Parallel Data Warehouse connection "Type" Connection String syntex I have from Microsoft