Call up the last screen of the layout builder

Hello BPS Experts,
there is a infobject object addition to the level and package. therefore when i open the layout in change mode it gives a message of infobject insertion. Its fine till here. i go from first screen ( list of objects ) > second screen ( sequence ) > third screen ( display in excel ) > now i try to save or exit i get the message displayed as 'call up the last screen of the layout'
please could me to understand the error. is there any other screen after the excel display ? am i missing anything in here. moreover i did not find the check button on the excel screen. is there something wrong from what i am doing.
Suggestions appreciated.
Thanks,
BWer

i think there is a problem with use of fiscal year in the lead columns. i get this message only when i have the fiscal year in the lead column. it does not show any rows with data. i changed the lead column to other infobject now it shows the rows and no message of 'call up last screen' do you guys know why there is a problem with the fiscal year. it does not display any data when fiscal year period is in the lead column.
Suggestions appreciated.
Thanks,
BWer

Similar Messages

I am using Iphone 5. Since the last 3 weeks the phones has been acting weird. on dialling a call it get hung on disconnecting it stays on the call ending screen only. this happens for atleast 5 to 7 minutes and then it gets to normal

I am using Iphone 5. SInce the last 3 weeks the phones has been acting weird. on dialling a call it get hung on disconnecting it stays on the call ending screen only. this happens for atleast 5 to 7 minutes and then it gets to normal or the other way is to turn the device off and then turn it on. the phones also running slow and therefore at times becomes very cumbersome. a few of my friends have also been having the same problems.
I have taken the phone to the service outles but the best they did was to reboot the phone it works fine for a day or two but again the same issue.
Can anyone share any info on it?

I'm glad to hear that they replaced your phone. Any experience I have had with Apple customer service and/or Genius bar has been extremely positive. While I have had positive outcomes from trouble with other phones in the past, they are not as quick and friendly. I had a Motorola phone and a Samsung phone go bad several years ago and warranty work through AT&T required that I wait for a replacement unit and then mail back the original unit to keep from being charged for the device. This usually meant almost a week without a phone. Nice to walk into Apple and walk out with a replacement device. Enjoy your phone.

Bridge from CS3 won't open and just sits on the task bar. If I hover over it, I can see a small view of the last screen I was working on. It won't open up full screen, what should I do. I've closed it and restarted my computer numerous times with no luck.

If I hover over it, I can see a small view of the last screen I was working on. It won't open up full screen, what should I do. I've closed it and restarted my computer numerous times with no luck.

Check System Preferences > Energy Saver
Select: Put hard disks to sleep when possible
Then click: Restore Defaults

Grey Screen in iPad Content Viewer when swipe through the last slides of the articles

Some of co-workers and clients reported and issue with the presentations and the viewer: some times grey screens appear when swiping in an presentation from article to article (reproducible only for the last slide of the article).
Pre-conditions:
1. Folio with several articles (3-4 is good).
2. Articles should have different number of slides.
Steps to reproduce:
1. Open folio on iPad and go to the last slide of each article.
2. Swipe from article to article (better from the first one article to the last one)..
Expected outcome: Last slide of the next article is displayed.
Actual outcome: Grey screen is displayed instead of the last article. Some times it's needed to swipe fast to reproduce the issue. Or at least on the last slide you'll see grey screen instead of the content.
Content will be displayed if you scroll up the page. Seems that new (additional) page is added after the last slide of an article and disappeared after scrolling the page.
Notes: Reproducible with the latest version of adobe viewer (i'm using v31(3.4.3.0.96281). NOT reproducible in iPad Content Viewer with version 3.2.1.3.85505.
Maybe somebody knows the root cause of this issue and how to fix it?

I can confirm that I've seen this happen but beyond that, I can't help.

I saturated all the available iPad (3rd. generation) screen space (home screens or desktop space) with apps, and the apps that got bumped out of the last screen, mysteriously disappeared? Where are those missing quick lauch app icons?

Running my 3rd generation iPad on iOS 7.0.4, I saturated all the available iPad screen space (which would be the 15 home screens or desktop worth of space) with apps, and the apps that got bumped out of the last screen space mysteriously disappeared. Where are those missing quick lauch app icons now? The apps are still installed and can be searched/accessed through the finder, but they no longer have a user friendly access. How can I solve this problem?

Christopher Doryan wrote:
Hi Hexonxonx, thanks for trying to help, but next time please read the entire discussion, in oder to better comprehend what is being asked. The reason being is that your answer added nothing to what had already been mentioned.
Like I said, I was aware it was possible to access the apps through the finder, but the question revolved around how to recover the quick launch app icons for certain vanished apps.
Wow, kind of a snotty response to someone who was taking their own time to offer help. Whether you thought it was helpful or not, didn't deserve such an unkind retort. Maybe when you realize we all just users here trying to help others like you, who have issues and we don't get anything in return for the countless hours some people here spend offering that assistance, you'll maybe be a little less quick to be critical.
Just sayin.......
Oh and Meg offered the right answer. Put your Apps in Folders, which will create extra space for the apps which have disappeared.

Why is the green screen visible on the last frame before the next clip?

Hey guys!
Maybe I'm ******** but i m having trouble here. I have "key-ed" a bunch of clips and successfully removed the green screen from them. But when placed in the timeline, the green screen of the clip reappears for the single frame before a next clip starts.
I've re-rendered and chopped ends off but the green screen keeps appearing in the last frame of any keyed clip that is about to cut to a different clip.
Where am i going wrong?

Hey! I tried both suggestions but even the self contained quicktime file has the green screen frames popping up.
I just dont get it, it's infuriating!
I used "chroma keyer" effect on the clip, only enable "key on saturation", the green screen disappears, I place clip on V2 and image on V1. Image is then visible where the green screen was. All is well until the last frame before a next clip because on that ast frame the green screen appears again. Where am I going wrong? Please help!

HT201401 I need to restore my iPhone. When I connect to my pc in iTunes it asks me to unlock the phone using my password. Problem is that I can't get to the password lock screen to do so. I can only get either the iTunes screen or the Emergency Call scre

I need to restore my iPhone. Once in iTunes, I get an error message asking me to use my passowrd to unlock phone. The problem is that I can't get to the password lock screen. All I can get is the iTunes screen or the emergency call only screen.

yes did you buy it of somebody or a well known company such as apple or carphone warehouse?
and i mean the phone would have been activated in the first place with the sim card you get given when you first get the phone.
trying to activate the phone with another sim card that you did not get when you brought the phone may result in you not being able to activate it
no worries

Calling the selection screen of the calling program after the execution of

Hi all,
I had created a program for a purchase order display.
It has three radio-buttons from where i am calling different programs.
I am using submit in the calling program and get parameter in at selection-screen output of the called program.
I am getting the end report without the display of the selection screen of called program. But when i am clicking back on the end-report then i want to come back on the selection screen of the calling program. But i am coming out of the execution.
Can anyone please tell me how to call the selection screen.
Thanks in advance,
Regards
vamsi

Hi, when you do the SUMBIT statement, make sure that you are using the extension........ AND RETURN.
Submit <report> AND RETURN.
This should return control to the caller.
Regards,
Rich Heilman

TS2570 I tried a safe reboot and my computer still shows a grey screen and the spinning gear when turned on. The last message on the reboot said "Launch_msg(): socket is not connected" have no idea what that means.

I tried a safe reboot my computer had a grey screen and a spinning gear. Safe boot did not fix the problem.
The last writing on the safe boot said " Launch_msg(): Socket is not connected.
Tried re starting and same grey screen and spinning gear

Can you boot to the Snow Leopard DVD?

On doing a full Restore on my iMac from A time capsule, I am getting a permanent white apple screen with permanent loading wheel. This is my second attempt to restore with the same outcome. Seems like the last stage of the restore is getting stuck. Any ti

On doing a full Restore on my iMac from A time capsule, I am getting a permanent white apple screen with permanent loading wheel. This is my second attempt to restore with the same outcome. Seems like the last stage of the restore is getting stuck. Any tips on how to sort this out please.
iMac, Mac OS X (10.7.3)

It just means some spammer is using your email address as the sender address for their spam. This is very easy to do - anyone can do it simply by changing the From email address in their email program. It does not mean your account was hacked or you have a virus (there are no current Mac viruses on the loose anyway, nor has there been for years).
There's nothing you can do about it. It can happen to anyone and the spammers will move on to using someone else's email address before long.

Last night I did an update and now when I turn on my macbook it just goes to the white screen with the apple and stays like that.

Last night I did an update and now when I turn on my macbook it just goes to the white screen with the apple and stays like that. How do I fix this issue?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

How to get the last day of the current open fiscal period?

hi folks,
I have to display the last date of the current open fiscal period in the selection screen. Its just a display only.
if there is any function module vailable for getting that period, kindly suggest me?
thanks in advance,
cheers,
Adi.

hi,
CALL FUNCTION '/BEV3/CHPERIOD_DETERMINE'
EXPORTING
date = sy-datum
version = c_version
IMPORTING
period = l_period
year = l_fiscal_year
EXCEPTIONS
period_in_not_valid = 1
period_not_assigned = 2
version_undefined = 3
OTHERS = 4.
If not use GM_GET_FISCAL_YEAR
CALL FUNCTION 'GET_CURRENT_YEAR'
EXPORTING
BUKRS = '1000' " Company Code
DATE = SY-DATUM " Date to find fiscal year for
IMPORTING
CURRM = w_currm " Current Fiscal Month
CURRY = w_curry " Current Fiscal Year
PREVM = w_prevm " Previous Fiscal Month
PREVY = w_prevy. " Previous Fiscal Year
Rgds
Anver

How to print in the last page of the script..?

Hi,
I am working on a script. I have a header window and one main window. In the main window, I am printing the line items of the Invoice. Once the line items finish, I have to print the sub totals there. and also to print the company agreement details(around 10 lines of text) in the last page of the script.
So, how to print the agreement details in the last page of the script..?
Can anyone provide me a sample code to find the last page of the Script layout..?
And regarding writing the agreement details, is it better to hard code the text or use the standard texts..? which one is better..?
Regards,
Paddu.

HI,
Just create a Standard text, if you are going to use this standard text in other layouts also... and use it otherwise you can hard code it as this its of only 10 lines.
declare one more element in the main window itselft and call it atlast it would print in the last page..
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'FOOTER'<- This element should contain the agreement details
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'MAIN'
EXCEPTIONS
ELEMENT = 1.
Thanks
Mahesh

The last day of the month when the report is run

Hi,
I am working on custom outbound idocs for FICO module through INTERFACE Program the third party sytem needs "The last day of the month when the report is run" so is there any sytem field or standard SAP Sytem Table field which can give me that value.plz let me know ASAP.
Other wise should i develop custom logic.

Hi,
Try this way.
Selection-screen
PARAMETERS: p_bldat LIKE bsis-bldat .
INITIALIZATION.
DATA: v_end_date LIKE sy-datum.
CALL FUNCTION 'LAST_DAY_OF_MONTHS'
 EXPORTING
 day_in = sy-datum
 IMPORTING
 last_day_of_month = v_end_date
 EXCEPTIONS
 day_in_no_date = 1
 OTHERS = 2.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
p_bldat = v_end_date.
Thanks,
Anitha

My iphone wont open, i even recovered it but to no avail, all it does is go to the white screen with the apple logo then turn off again

Hey everyone,
This morning i took my phone out of the charger and everything was normal however, once i got in the car i looked at my phone and realized it was turned off. I tried turning it on again as well but all it does is going to the start up screen (The white screen with the apple logo) and then it turns off again as well. I also put it on the charger but it does the same thing but repeatedly. So it just goes to the white screen and off again. At last i resorted to recovering my phone even if it meant losing all my data. Slow internet connection meant it took all night but in the morning i recovered and everything and got to the last step ( It told me its finished but i should leave my phone connected to itunes and it will pop up there) but all that popped up was an error screen. It still broken but now sometimes when i try to turn it on the same white screen with the logo comes on with a bar under it. this bar fills up a little then the screen goes black again. Is there any other way i can try to fix this?
P.S. There are no apple stores in my area so i took it to one of the phone stores here and even they said they couldnt do anything about it

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Call up the last screen of the layout builder

Similar Messages

Maybe you are looking for