Callback called when mouse over

I have a button which have a callback. When the mouse is over the button (without click), the callback is called. I would like to have the callback called only on mouse click and not on mouse over. Is it possible ?

sfl,
Right-click the button in UIR editor and choose View Control Callback.
You will be directed to the C-file that has the code for the button's callback.
In this (highlighted) callback function, you will see a switch-case statement.
Remove the block for the case EVENT_MOUSE_OVER. Simply select with cursor and delete.
To change the defualt event setting (to avoid getting this event for newly created buttons) :
Open your UIR file, and select Code > Preferences > Default Events from the menu.
There you can select for which events the code generator will create a case statement further on.
Hope this helps,
S. Eren BALCI
www.aselsan.com.tr

Similar Messages

Showing help text of controls when mouse over connector

I'm working with a system where we have decided to use input clusters for all data to all vi:s. These clusters are saved as strict type defs.
Our idea for documentation so far has been to write a description of what the vi does in the vi description, and describing the indata by documenting each element in the input clusters type defs.
This works very well for documentation printing purposes. However, we cannot see the descriptions of the indata in the help pop-up when mouse-over the vi.
Does anyone know a way of getting the documentation of the wired inputs to a vi when mouse-over the vi?
Regards
//Martin

Do you want to (1) see the help info (description and tip) for the cluster when you're on the front panel of the VI that uses it, or (2) do you want to see the help info when you're on a diagram of a calling VI using the VI with the cluster as a sub-VI?
1. In LabView 6.1 or 7.0, you will see the help info for a strict type-def control on the front panel of a VI that uses it. I saved a cluster as a strict type-def. I added description and tip for the cluster itself and for individual elements within the cluster. Then I added the cluster to the front panel of a VI.
In either version 6.1 or 7, I can see the help info:
I can see the description of the cluster or the individual element (depending on where the mouse is pointing) whenever I have context help open (Ctrl-H
to toggle). I can see the tip for the cluster or individual element if the operate tool is selected.
After I added the strict type-def control to a VI, I went back to the control editor and modified the description and tip, then updated the control on the VI and saw the new info.
2. When you're on the diagram of a calling VI using the VI with the cluster as a sub-VI, the only help info (description and tip) available is what you entered for the sub-VI. You can't see the help for the individual controls on the sub-VI unless you open the sub-VI. On the VI with the cluster, you can cut and paste help info from the cluster to the VI. On the diagram of the calling VI, with the wiring tool selected, you can see the name of the sub-VI terminal, but not the help info for that terminal.
Seeing the help for the individual control of a sub-VI when you're wiring it sounds like a good idea to me. Maybe in LabView 8?

The list of extensions for InDesign now have a yellow triangle warning symbol in front of a good many of the extensions and when moused over i get one of two messages: "Extensions may not function properly because it does not meet the dependency conditio

The list of extensions for InDesign now have a yellow triangle warning symbol in front of a good many of the extensions and when moused over i get one of two messages:
"Extensions may not function properly because it does not meet the dependency condition."
OR
Extension Status is not consistent with extension set configuration."
The reason I opened the Extension Manager in the first place was to check to see if I had installed a third party extension. And I was presented with these warning symbols. I haven't added anything, I haven't done anything that would cause this.
Does anyone know how to fix this???
I am running OSX 10.9.5; Indesign CS6 version 8.0.2 And Adobe Extension Manager version 6.0.8.28.
Thanks in advance!
Nina

Many InDesign pre-installed extensions (Those extensions you have immediately after InDesign installation) define dependency rules in their mxi files. Dependency means that one extension works well only if one or more other extensions are installed and enabled. If this condition is not met, the yellow triangle warning will be shown.
You can select an extension with warning, click "Advanced" tag page in the lower right panel. You will see "This extension has dependency on: <extension name> ...". Check whether every extensions listed here are available and enabled. If not, enable them. Repeat these steps for all the extensions which have warning.

When mousing over text, the cursor flickers constantly (with each letter passed) from arrow to i-beam and back. The problem occurs in both MS Word and Pages. Any idea of how to resolve this annoying problem is appreciated. System: 10.10.1

When mousing over text, the cursor flickers constantly (with every letter passed) from arrow to i-beam and back. The problem occurs in both MS Word 2011 and Pages. Any idea of how to solve this annoying problem will be much appreciated. System 10.10.1 on a MacPro (Late 2013)

The mouse is controlled by the OS so don't guess any app other than a mouse driver or OS X itself would be able to cause this sort of flicker issue.
Have you seen the following and is it what you are seeing? Maybe you could make a movie (Quicktime is great for this this to make a screen recording) - but not sure how to attach a movie to these discussions as mine is grayed out and can't be selected (to the right of the insert image). Here is the what I found for a search of "mouse cursor flickers os x yosemite"
https://www.youtube.com/watch?v=ZNQ0D84DdF4
What kind of mouse are you using? Is the mouse driver up to date if it's a third party mouse?

Turn off metadata display box when mousing over photos?

When mousing over photos in the viewer or browser, a box pops up next to the cursor showing metadata. I find this very distracting and annoying when editing a photo or confirming faces. In Aperture 2, you could turn it off under preferences, but for the life of me I can't figure out how to turn it off in Aperture 3 (metadata has a separate tab rather than controlling the viewing of metadata under preferences in A2). Hitting the letters Y and U work in the viewer and browser, respectively, but only for one photo - doesn't stop it for good. I've tried messing around with all the other metadata view settings. Any ideas?

Hitting the letter T toggles the display, you can adjust this setting with Command -J.
HTH
wok4

Imported movie of hard disc not working. Blank square and when mousing over

I have imported about 150 gig of mp4 video into my iMovie event library and no problems until now. The mp4's are stored on my external hard drive (1000gig) and add up to around 105 gig in total. iMovie is also stored on this hard drive. When I import into my event library everything was fine but now I have hit a point where any more mp4's come up in the event library as a blank file, when I mouse over them a still shot comes up of another pre-imported video that has nothing to do with that video and the file plays sound but there is no footage. I still have 50 gig of footage to import before I can start editing my movie.
I still have 750 gig free space on my external drive and I am using a Macbook with 4 gig of memory and 48 gig of 119 still available on my Mac hard drive, is this the problem? Does anyone have any solutions ?

Thanks again Tom, I worked out your clue, being "whoa" as to meaning I shouldn't have moved iMovie onto my hard drive, I have moved it back to my Mac and everything seems to be working fine now, fingers crossed. I am really getting good at importing now, but don't think you'll be rid of me just yet as I have a lot of editing to start in the near future!

How do I keep the name tags in Picasa Web Albums from appearing on the images by default? With Explorer, name tags only appear when mousing over the image, but with Firefox, all the tags appear on the picture as soon as it is loaded, which looks messy.

I use Picasa to create web albums, and I tag people who appear in the pictures. With Explorer, the name tags do not appear on the pictures until I mouse over a specific person, at which point the tag appears. With Firefox, the name tags appear as soon as the picture is loaded, and only disappear when you mouse over the people in the picture. This makes the picture look messy; by default, one would want to see a picture without tags all over people's faces.
The only way to "fix" this is to disable the name tags completely (or tell people to use Explorer!), but this is not an ideal solution, since I would like to be able to share albums with people's names in them.

I use Picasa to create web albums, and I tag people who appear in the pictures. With Explorer, the name tags do not appear on the pictures until I mouse over a specific person, at which point the tag appears. With Firefox, the name tags appear as soon as the picture is loaded, and only disappear when you mouse over the people in the picture. This makes the picture look messy; by default, one would want to see a picture without tags all over people's faces.
The only way to "fix" this is to disable the name tags completely (or tell people to use Explorer!), but this is not an ideal solution, since I would like to be able to share albums with people's names in them.

How to get text when mousing over image?

Hey there, I am extremely new to Flash, but know other Adobe programs so tend to learn quickly.
I desperately need to find out how to get text to pop up when i mouse over PART of the image and i havent been able to find any help online in the last two days (pulling my hair out in stress).
Now i uploaded a rough mock up i did on Photoshop, so you can see when i mouseover the top layer of the cake i need a line to stretch out and the text to pop up at the end of it. Similarly if i moused over the cherry another piece of text needs to come up in the same manor.
Also since i need it to be a website link so what format do i open it with when i go to FILE- NEW?
Honestly thank you so much in advance to anyone that helps

First you have to choose if you want to handle devices. If not and you want to stay in Flash I'll stick on topic.
In the HTML version you could either use a good old fashioned image map (they're still fine in the HTML5 era) or you could use a layering technique (here's a random layering example).
In Flash you can do it a few different ways. If you intend on keeping the image intact as a single object then you'll be essentially doing the same as an image map. You can draw invisible hitareas on the various parts of the object and have those areas trigger a specific function that will display your text. If you break up the image into the separate parts then you can directly assign those parts to fire off a function themselves.
First I'd like to know your desired direction.

Link not showing hand icon when mouse over

I am creating an image gallery and have thumbnails that open
in a separate window to a larger version of the image.
The links are working, but when you put the mouse over the
image the little hand does not appear to show it is a link, if you
click it works and the image opens, but the hand does not show,
what have I done wrong.

This implies that you have applied the behavior directly to
the <img> tag,
when you should have applied it to an anchor tag surrounding
the <img> tag,
e.g.,
this - <a href="javascript:;"
onclick="whatever"><img src="whatever"...></a>
rather than this - <img onclick="whatever"
src="whatever"...>
You can get this by manually creating it, or by selecting the
image,
removing the behavior, then entering "javascript:;" (without
the quotes) in
the Link field of the Property inspector. This will wrap the
<img> tag with
the anchor. Now select the <a> on the Tag selector, and
apply your
behavior.
As you can see, familiarity with HTML (and CSS) will come in
quite handy
when working with DW.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"PosterP" <[email protected]> wrote in
message
news:g49sdk$gtp$[email protected]..
>I am creating an image gallery and have thumbnails that
open in a separate
> window to a larger version of the image.
>
> The links are working, but when you put the mouse over
the image the
> little
> hand does not appear to show it is a link, if you click
it works and the
> image
> opens, but the hand does not show, what have I done
wrong.
>

Flash 8 pro crashes when mouse over stage

Can anyone help me out with this? I have Flash 8 Pro
installed on my Windows XP Pro SP2 machine. Everything worked great
when I installed it. Now, about a month after it was installed, it
crashes anytime I move the mouse over the blank stage. I basically
start Flash 8 pro, it loads OK, the interface comes up fine menus
are accessible, etc. but the second I move my mouse into the center
STAGE area, it crashes. Any help?

never heard this issue before - did you try reinstalling?
Chris Georgenes
Animator
http://www.mudbubble.com
http://www.keyframer.com
Adobe Community Expert
*\^^/*
(OO)
<---->
bhornedo wrote:
> Can anyone help me out with this? I have Flash 8 Pro
installed on my Windows XP
> Pro SP2 machine. Everything worked great when I
installed it. Now, about a
> month after it was installed, it crashes anytime I move
the mouse over the
> blank stage. I basically start Flash 8 pro, it loads OK,
the interface comes up
> fine menus are accessible, etc. but the second I move my
mouse into the center
> STAGE area, it crashes. Any help?
>

Behaving erratically when mousing over the text

Hi all,
I have a very strange problem. I am trying to do a simple photo-gallery using edge animate without using the timeline as much as possible.
Let's say I have a thumbnail, and I want to mouse over the thumbnail and it goes semitransparent and a text pops up.
Now, what I had done is I have gone to the compositionready and set the codes to sym.$("caption1_txt").hide(); to hide the text. Next, I have gone to the mouseOver and set the codes to
sym.$("thumb1").animate(
"opacity":"0.2"
}, 500
to set the opacity to 20% for the thumbnail. And then I set the text caption to show like so :
sym.$("caption1_txt").show();
Conversely, I have gone to mouseOut and do the reverse as shown :
sym.$("thumb1").animate(
"opacity":"1"
}, 500
sym.$("caption1_txt").hide();
The strange thing happens when I mouseover the text, it seems to flicker repetitively. May I know how to solve this? It seems the program is trying to execute an event for the text block but there is none. Is there a way to nullify or 'ignore' the mouseover effect for the text?
Thanks, greatly appreciate!

Thanks for the prompt response again!
Yes, I realised I have to go to the symbols and then set that to %. Didn't know that can be done
Thanks heaps! It is working!
Another question, which I have posted in another post, I do have problems working with the jQuery animate() function. I have tred to implement CSS3 filters using the animate() function in jQuery but it does not seem to be working. I know presently only Chrome supports this sets of filter. An example of what I had done for the mouseOver handler :
sym.$("thumb1").animate(
"-webkit-filter":"sepia(100%)"
}, 250
Is there anything that is missing?
Thanks and greatly appreciate!

Change Cursor When Mousing Over Links In Plug-in Manager

As it stands, the links are blue - which is fine, but when you mouse over them the cursor doedn't change (nor does the link itself) so they don't look like they're hot. If the mouse doesn't change the link should or something (anything) so the user can tell they're links.
Thanks,
Rob

the above sol will only help you to see the cursor on the local machine
to make it visible on every machine
goto column properties >> additional CSS>>in css write cursor:default
then save changes system wide for these data type
Also make the same changes in the other datatypes also.......
cheers
Ankit

While using firefox, when mouse over link causing monitor to crash

Windows 7; Dell studio xps
On mouse over a link/photo link and/or click on a link and my monitor goes into standby mode. Monitor still on (as is my computer) but cannot reestablish visual on monitor. Have used Explorer in the past and never had this problem. This error happens almost every time when I perform an image search with Google then mouse over a resulting image.

Try to start Firefox in [[Safe mode|Safe mode]]. This mode disables all extensions, user customizations, hardware acceleration, etc. temporarily for diagnostic and troubleshooting. If Firefox works fine in Safe Mode, then this is likely an add-on issue. Restart Firefox in normal mode, then type "About:addons" (without the quotes) in the address bar. Disable your extensions one by one, restarting Firefox between each one, until you find the trouble maker. Once you do, you can disable that add-on and report the issue to that add-on's developer.
A few other basic trouble shooting things you can try is this:
Run all Windows Updates, install all needed service packs, etc.
Update your graphics driver (Firefox uses your graphics card for some rendering, and an out of date graphics card driver can cause problems. [https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers].
Update all your plugins (Flash, Java, etc.): [http://www.mozilla.org/plugincheck/ http://www.mozilla.org/plugincheck/].

How can i highlight an image when mouse over an image in c#?

I want to highlight an image when mouse goes there on image. The backcolor of image should change. Give a solution.

Its for button. I need to highlight image. I have attached screen shot. I want to create like that in windows form.
Hello,
Based on my understanding, it just changes the background for that image to highlight them.
So we could change the background for the control hosts these images, and in addition, the size mode should not be autosize, because we should keep some area to display the background.
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

JScript Error when mouse over active session chart.

Whenever I mouse over the chart to change the vertical box indicating the time slice you're dealing with I get an error.
It says:
'tipBoxNode' is null or not an object
line: 153, column 11
Not sure what to say. I have the latest SVG installed. I'm using IE7
The OEM version says:
Oracle Enterprise Manager 10g Release 4 Grid Control 10.2.0.4.0

'tipBoxNode' is null or not an object
line: 153, column 11Getting "'tipboxnode' is null" message from 10.2.0.4 Grid Control
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=565594.1
Top Activity Chart Errors: 'TIPBOXNODE IS NULL OR NOT AN OBJECT' ERROR IN TOP ACTIVITY PAGE
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=737052.1

Callback called when mouse over

Similar Messages

Maybe you are looking for