Caller 70 is missing time out (short dump)

when I was trying to load transaction data into cube , it was failed
the error message was :
short dump : caller 70 is missing
I checked in st22 , it shows that <b>time out</b> .
when check in r/3 side , extraction was over and job was finished.
data is coming upto PSA & is not updating into data target and geting failed after some time.
can any one give me suggestion.
thanks in advance
Ram

Hi Ram.
We were getting the same message.  SAP recently published note 631668.  It suggests dropping the InfoCube indexes before the load and then rebuilding them afterwards.
I set our system up to do that last night.  We didn't get the error last night, but a single set of loads is not enough to make me say that it works.  But it might be worth trying in your case.
Regards,
Adam

Similar Messages

  • Run time error (short dump) executing program SCAN_BW_REFERENCES in SE80

    Hi experts,
    I am not an ABAPer, or Basis person, rather a hybrid functional/technical Key User for our Business Warehouse system (BW 3.5, Netweaver 2004).  We have a user who cannot save BW reports to his favorites and he is getting a number of error messages.  OSS note 887002 seems to address this and indicates that I should run program SCAN_BW_REFERENCES from transaction SE80.  The program is supposed to perform the checks for BW objects assigned to the Favorites and identify situations causing terminations in BW frontend applications.  I have attempted to execute this program on several occassions and always get run-time errors (short dumps).  Here is the error:
    Runtime Errors         TSV_TNEW_PAGE_ALLOC_FAILED
    Date and Time          2008.09.17 19:00:49
    ShrtText
         No storage space available for extending an internal table.
    What happened?
         You attempted to extend an internal table, but the required space was
         not available.
    I have been informed by our Basis group that I have reached a memory limit, but they will not extend the memory paramters.  Any ideas on a work-a-round or a way to minimize the number of records this program is pulling in, in an attempt to get it to run?
    Thanks,
    HC

    Hi,
    The only response I got from Basis was that they would not extend the memory parameters because they are for all users in the system.  Not sure what that means. 
    The full dump is too large to paste here.  I think what I will do is to see if our ABAPers can create a modified version of this program to include selection by user.  Typically it is for only one user that I need to run the program, and that surely would fall within the space requirements.
    Thanks for your answer.
    //HC

  • Why do we call an ABAP Runtime error a "Short Dump"

    Hi All,
    I was just working on one of the ABAP runtime errors with my technical counterpart and a question came to my mind "Why do we call an ABAP Runtime error a "Short Dump"?".
    I tried asking a few friends of mine working in the technical space in SAP and they were not able to answer.
    So, some one of you experts help me getting answer to this question.
    Thanks in Advance.
    Nitin.

    ABAP Runtime error is a generalized term .......... meaning the error occured while runtime.
    wheare as short dump.
    Short -  means brief.
    dump - error information from the memory
    Short dumps (also called ABAP memory dumps). Short dumps occur when an ABAP program fails.
    Short dumps provide basic information about which program failed and what the error was.
    hope this helps.

  • I can't download update 5.0.1 and have disabled all security measures and the download still times out shortly after beginning the download.  All other downloads are successful so I know the problem is not in the computer.  Can anyone help?

    Can't download update 5.0.1 to my iPad2.  I disabled all security items in fact have deleted them from computer, but the download still times out advising check settings but all is set right?  Can any one help with this matter?

    I'm still experiencing this problem.  I went to settings, general, software and it says Install now.  But when I try, I get an error message. 

  • Short Dump in BI 7.0,While Remodelling the Infocube

    Hi Experts
    I got the below short dump in BI 7.0 while remodelling infocube to add a new time char (0CALMONTH2)
    Please update me what is wrong
    Runtime Errors         GETWA_NOT_ASSIGNED
    Date and Time         
    Short text
    Field symbol has not yet been assigned.
    What happened?
    Error in the ABAP Application Program
    The current ABAP program "CL_RSCNV_ADD_CHAR=============CP" had to be
    terminated because it has
    come across a statement that unfortunately cannot be executed.
    Error analysis
    You attempted to access an unassigned field symbol
    (data segment 32776).
    This error may occur if
    - You address a typed field symbol before it has been set with
    ASSIGN
    - You address a field symbol that pointed to the line of an
    internal table that was deleted
    - You address a field symbol that was previously reset using
    UNASSIGN or that pointed to a local field that no
    longer exists
    - You address a global function interface, although the
    respective function module is not active - that is, is
    not in the list of active calls. The list of active calls
    can be taken from this short dump.
    How to correct the error
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "GETWA_NOT_ASSIGNED" " "
    "CL_RSCNV_ADD_CHAR=============CP" or "CL_RSCNV_ADD_CHAR=============CM002"
    "IF_RSCNV_OPERATION~CONVERT"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
    To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
    Display the system log by calling transaction SM21.
    Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
    In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
    Information on where terminated
    Termination occurred in the ABAP program "CL_RSCNV_ADD_CHAR=============CP" -
    in "IF_RSCNV_OPERATION~CONVERT".
    The main program was "RADGENREP ".
    In the source code you have the termination point in line 23
    of the (Include) program "CL_RSCNV_ADD_CHAR=============CM002".
    The program "CL_RSCNV_ADD_CHAR=============CP" was started as a background job.
    Job Name....... "ZC13_32/ZCM_INSERT"
    Job Initiator.. "GHANTAK"
    Job Number..... 10521300
    Source Code Extract
    Line
    SourceCde
    1
    METHOD if_rscnv_operation~convert.
    2
    *CALL METHOD SUPER->IF_RSCNV_OPERATION~CONVERT
    3
    EXPORTING
    4
       I_R_OLD =
    5
    CHANGING
    6
       C_R_NEW =
    7
    8
    FIELD-SYMBOLS: <l_s_oldtable> TYPE ANY.
    9
    FIELD-SYMBOLS: <l_s_newtable> TYPE ANY.
    10
    FIELD-SYMBOLS: <l_fillfield> TYPE ANY.
    11
    FIELD-SYMBOLS: <l_addfield> TYPE ANY.
    12
    DATA: l_r_fillfield TYPE REF TO data.
    13
    DATA: l_r_addfield TYPE REF TO data.
    14
    15
    TRY.
    16
    ASSIGN i_r_old->* TO <l_s_oldtable>.
    17
    ASSIGN c_r_new->* TO <l_s_newtable>.
    18
    19
    ASSIGN COMPONENT p_fillfieldnm OF STRUCTURE <l_s_oldtable> TO <l_fillfield>.
    20
    ASSIGN COMPONENT p_addfieldnm OF STRUCTURE <l_s_newtable> TO <l_addfield>.
    21
    22
    GET REFERENCE OF <l_fillfield> INTO l_r_fillfield.
    >>>>>
    GET REFERENCE OF <l_addfield> INTO l_r_addfield.
    24
    25
    IF NOT p_constval IS INITIAL.
    26
    fill constant
    27
    CALL METHOD cl_rscnv_operation=>fill_const
    28
    EXPORTING
    29
    i_newiobj    = p_add_char
    30
    i_constval   = p_constval
    31
    i_fieldtype  = o_fieldtype
    32
    CHANGING
    33
    c_r_newfield = l_r_addfield.
    34
    35
    36
    ELSEIF NOT p_attriobj IS INITIAL AND NOT p_ofiobjnm IS INITIAL.
    37
    fill using attribute of characteristic
    38
    ASSIGN i_r_old->* TO <l_s_oldtable>.
    39
    ASSIGN COMPONENT p_fillfieldnm OF STRUCTURE <l_s_oldtable> TO <l_fillfield>.
    40
    GET REFERENCE OF <l_fillfield> INTO l_r_fillfield.
    41
    CALL METHOD read_attr
    42
    EXPORTING

    Hi,
    i mean to say, just come out the transaction & try again..............
    or else u can check the short dump in ST22...........
    Regards,
    SD

  • Short Dump - GETWA_NOT_ASSIGNED - Flexible upload of RFD

    Hi,
    SEM 6.0 / BI 7.0
    When i try to do a Flexible upload for a sample RFD, i get the following dump:
    Runtime Errors         GETWA_NOT_ASSIGNED
    Date and Time          11/25/2008 16:22:01
    Short dump has not been completely stored (too big)
    Short text
        Field symbol has not yet been assigned.
    What happened?
        Error in the ABAP Application Program
        The current ABAP program "CL_UC_TASK_EXECUTION==========CP" had to be
         terminated because it has
        come across a statement that unfortunately cannot be executed.
    Error analysis
        You attempted to access an unassigned field symbol
        (data segment 32776).
        This error may occur if
        - You address a typed field symbol before it has been set with
          ASSIGN
        - You address a field symbol that pointed to the line of an
          internal table that was deleted
        - You address a field symbol that was previously reset using
          UNASSIGN or that pointed to a local field that no
          longer exists
        - You address a global function interface, although the
          respective function module is not active - that is, is
          not in the list of active calls. The list of active calls
          can be taken from this short dump.
    Trigger Location of Runtime Error
        Program                               CL_UC_TASK_EXECUTION==========CP
        Include                                 CL_UC_TASK_EXECUTION==========CM02V
        Row                                     155
        Module type                          (METHOD)
        Module Name                        COMPARE_OLD_AND_NEW_DOCS
    Flexible upload - Delete all / Cumulative
    Has anyone encountered this type of dump before?
    My Observation
    (Data Rows contain the following columns - Item / Company / Trading partner / PV LC)
    When i give a trading partner which is not defined in the system, the system is interpreting the header row & data rows. Also, it gives an error message for each row.
    But,
    When i give a trading partner which is defined in the system, or when i remove the trading partner column in total, it throws the above short dump.
    The breakdown category defined in the system are Trading partner & Movement type.
    Both, have the breakdown type 1. (optional breakdown, initialized value allowed).
    Pls note that after several permutations & combinations - to trace the error, i have removed all the columns & kept the minimum required (Item / Company / Trading partner / PV LC).
    Appreciate your comments / inputs.
    Thanks!
    Kumar

    Hi Kumar,
    The note refers to FINBASIS 300 release.
    In the present system we have, it is FINBASIS 600.
    I raised an OSS message.
    Anyway, implementation of the note helped me with all releases.
    But, first of all, I mentioned another remedy that you may see here:
    SPRO: SEM/Business Analytics -> Fin. Basis -> Master Data Framework -> System Settings -> Profile Parameter Setting.
    It's about setting parameter for ABAP shared memory on the server. If you do not set this parameter to 200-300 MB, you constantly will have the errors like I mentioned while trying to save master data. Did you read my previous message carefully and look at this hint?
    In case of breakdown type 1 - the upload should happen - if we dont specify any values for the breakdown category. Pls confirm.
    - Confirmation. The system will accept any value, including null.
    Is it true that we cannot load RFD data (with both movement type & trading partner information), in one go? If yes, what is the reason behind it.
    - No confirmation. Where is it from? I always do such a load.

  • Programme going for short dump

    HI FRIENDS
    WHENEVER OUR PRG TRIES TO RETRIEVE MORE THAN 20000 RECORDS ITS GIVING DUMP WITH
    Storage_parameters_wrong_set
    abap/heap_area_dia/ndia value 2gb.
    APPRECIATE YOUR RESPONSE.
    Regards,
    Mir.

    Hi Tim,
    The short dump info is :
    Runtime Errors         STORAGE_PARAMETERS_WRONG_SET
    Date and Time          23.05.2006 17:11:25
    ShrtText
    &INCLUDE INCL_INSTALLATION_ERROR
    What happened?
    The current program had to be terminated because of an
    error when installing the R/3 System.
    The program had already requested 456137504 bytes from the operating
    system with 'malloc' when the operating system reported after a
    further memory request that there was no more memory space
    available.
    What can you do?
    Make a note of the actions and input which caused the error.
    To resolve the problem, contact your SAP system administrator.
    You can use transaction ST22 (ABAP Dump Analysis) to view and administer
    termination messages, especially those beyond their normal deletion
    date.
    Set the system profile parameters
    - abap/heap_area_dia
    - abap/heap_area_nondia
    to a maximum of 456137504. Then reduce the value by 10.000.000 to be on the
    safe side.
    Then restart the SAP System.
    abap/heap_area_nondia and abap/heap_area_dia:
    Set smaller than the memory achieved for each process
    with 'malloc' and smaller than abap/heap_area_total
    You should also check whether the available memory (file system
    swap and main memory) is sufficient for the started program
    and its data.
    Error analysis
    When the program was running, it was established that more
    memory was needed than the operating system is able to provide savely.
    To avoid a system crash, you must prevent this
    situation.
    Last error logged in SAP kernel
    Component............ "EM"
    Place................ "SAP-Server hstnd1_DV1_00 on host hstnd1 (wp 2)"
    Version.............. 37
    Error code........... 7
    Error text........... "Warning: EM-Memory exhausted: Workprocess gets PRIV "
    Description.......... " "
    System call.......... " "
    Module............... "emxx.c"
    Line................. 1878
    How to correct the error
    Report the error to the group responsible for installing your
    R/3 System.
    System environment
    SAP Release.............. "640"
    |
    Operating system......... "Windows NT"
    Release.................. "5.2"
    Hardware type............ "4x Intel 801586"
    Character length......... 8 Bits
    Pointer length........... 32 Bits
    Work process number...... 2
    Short dump setting....... "full"
                                                    |
    Database type............ "MSSQL"
    Database name............ "DV1"
    Database owner........... "dv1"
    Character set............ "English_United State"
    SAP kernel............... "640"
    Created on............... "Nov 4 2004 23:26:03"
    Created in............... "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
    Database version......... "SQL_Server_8.00 "
    Patch level.............. "43"
    Patch text............... " "
    Supported environment....
    Database................. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
    SAP database version..... "640"
    Operating system......... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
    Memory usage.............
    Roll..................... 700176
    EM....................... 385999584
    Heap..................... 456137504
    Page..................... 57344
    MM Used.................. 729325096
    MM Free.................. 108201024
    Appreciate your help..
    Regards,
    Mir.

  • REGARDING ALV REPORT SHORT DUMP

    hI ALL,
    IAM GETTING FOR THE FOLLOWING CODE,
    PLEASE WHY THE ERROR IN ECC 6.0
    TABLES AND DATA DECLARATION.
    *TABLES: mara,makt.",marc.
    data syrepid like sy-repid.
    data sydatum(10). " LIKE sy-datum.
    data sypagno(3) type n.
    WHEN USING MORE THAN ONE TABLE IN ALV WE NEEED TO DECLARE THE TYPE
    GROUP (TYPE-POOLS--------->SLIS)
    type-pools : slis.
    INTERNAL TABLE DECLARATION.
    INTERNAL TABLE TO HOLD THE VALUES FROM THE MARA TABLE
    data: begin of t_mara occurs 0,
    matnr like mara-matnr,
    meins like mara-meins,
    mtart like mara-mtart,
    matkl like mara-matkl,
    end of t_mara.
    INTERNAL TABLE TO HOLD THE CONTENTS FROM THE EKKO TABLE
    data : begin of t_marc occurs 0,
    matnr like mara-matnr,
    werks like marc-werks,
    minbe like marc-minbe.
    data: end of t_marc.
    INTERNAL TABLE TO HOLD THE VALUES FROM MAKT TABLE.
    data : begin of t_makt occurs 0,
    matnr like mara-matnr,
    maktx like makt-maktx,
    spras like makt-spras,
    end of t_makt.
    INTERNAL TABLE WHICH ACTUALLY MERGES ALL THE OTHER INTERNAL TABLES.
    data: begin of itab1 occurs 0,
    matnr like mara-matnr,
    meins like mara-meins,
    maktx like makt-maktx,
    spras like makt-spras,
    werks like marc-werks,
    minbe like marc-minbe,
    end of itab1.
    THE FOLLOWING DECLARATION IS USED FOR DEFINING THE FIELDCAT
    AND THE LAYOUT FOR THE ALV.
    HERE AS slis_t_fieldcat_alv IS A INTERNAL TABLE WITHOUT A HEADER LINE
    WE EXPLICITELY DEFINE AN INTERNAL TABLE OF THE SAME STRUCTURE AS THAT
    OF slis_t_fieldcat_alv BUT WITH A HEADER LINE IN THE DEFINITION.
    THIS IS DONE TO MAKE THE CODE SIMPLER.
    OTHERWISE WE MAY HAVE TO DEFINE THE STRUCTURE AS IN THE NORMAL SAP
    PROGRAMS.
    IN THE FIELDCATALOG TABLE WE ACTUALLY PASS THE FIELDS FROM ONE OR
    MORE TABLES AND CREATE A STRUCTURE
    IN THE LAYOUT STRUCTURE WE BASICALLY DEFINE THE FORMATTING OPTIONS
    LIKE DISPLAY IN THE ZEBRA PATTERN ,THE HOTSPOT OPTIONS ETC.
    data: fieldcatalog type slis_t_fieldcat_alv with header line,
    fieldlayout type slis_layout_alv.
    DECLARING THE EVENTTABLE INTERNL TABLE FOR USING EVENTS LIKE
    TOP-OF-PAGE ETC.
    data : eventstab type slis_t_event with header line.
    DECLARING AN INTERNAL TABLE TO HOLD THE DATA FOR THE TOP-OF-PAGE
    data : heading type slis_t_listheader with header line.
    data : heading1 type slis_t_listheader with header line.
    data : heading2 type slis_t_listheader with header line.
    data : heading3 type slis_t_listheader with header line.
    data : heading4 type slis_t_listheader with header line.
    data : heading5 type slis_t_listheader with header line.
    data : heading6 type slis_t_listheader with header line.
    data : heading7 type slis_t_listheader with header line.
    data : heading8 type slis_t_listheader with header line.
    STRUCTURE TO PASS THE COLOR ATTRIBUTES FOR DISPLAY.
    data : colorstruct type slis_coltypes.
    INITIALIZATION. *
    initialization.
    syrepid = sy-repid.
    sypagno = sy-pagno.
    clear fieldcatalog.
    START-OF-SELECTION. *
    start-of-selection.
    SUBROUTINE TO POPULATE THE COLORSTRUCT
    perform fill_colorstruct using colorstruct.
    SUBROUTINE TO POPULATE THE FIELDS OF THE FIELD CATALOGUE
    perform populate_fieldcatalog.
    SUBROUTINE TO SELECT DATA FROM VARIOUS TABLES AND POPULATE IT IN THE
    INTERNAL TABLE.
    perform selectdata_and_sort.
    SUBROUTINE TO POPULATE THE LAYOUT STRUCTURE.
    perform populate_layout using fieldlayout.
    SUBROUTINE TO CALL THE FUNCTION MERGE TO ENSURE PROPER DISPLAY.
    perform merge_fieldcatalog.
    SUBROUTINE TO POPULATE THE EVENTSTAB.
    perform fill_eventstab tables eventstab.
    SUBROUTINE TO POPULATE THE HEADING TABLES.
    perform fill_headingtable tables heading using 'HEADING'.
    perform fill_headingtable tables heading1 using 'HEADING1'.
    perform fill_headingtable tables heading2 using 'HEADING2'.
    perform fill_headingtable tables heading3 using 'HEADING3'.
    perform fill_headingtable tables heading4 using 'HEADING4'.
    perform fill_headingtable tables heading5 using 'HEADING5'.
    perform fill_headingtable tables heading6 using 'HEADING6'.
    perform fill_headingtable tables heading7 using 'HEADING7'.
    perform fill_headingtable tables heading8 using 'HEADING8'.
    SUBROUTINE TO DISPLAY THE LIST.
    perform display_alv_list.
    FORMS
    IN THIS SUBROUTINE WE POPULATE THE FIELDCATALOG TABLE WITH THE NAMES
    OF THE TABLE,FIELDNAME,WHETHER IT IS KEY FIELD OR NOT,HEADING AND
    COLUMN JUSTIFICATION.
    form populate_fieldcatalog.
    perform fill_fields_of_fieldcatalog tables fieldcatalog
    using 'ITAB1' 'MATNR' 'X' .
    perform fill_fields_of_fieldcatalog tables fieldcatalog
    using 'ITAB1' 'MEINS' ' '.
    perform fill_fields_of_fieldcatalog tables fieldcatalog
    using 'ITAB1' 'MAKTX' ' ' .
    perform fill_fields_of_fieldcatalog tables fieldcatalog
    using 'ITAB1' 'MTART' ' ' .
    perform fill_fields_of_fieldcatalog tables fieldcatalog
    using 'ITAB1' 'MATKL' ' ' .
    perform fill_fields_of_fieldcatalog tables fieldcatalog
    using 'ITAB1' 'SPRAS' ' ' .
    perform fill_fields_of_fieldcatalog tables fieldcatalog
    using 'ITAB1' 'WERKS' ' ' .
    perform fill_fields_of_fieldcatalog tables fieldcatalog
    using 'ITAB1' 'MINBE' ' ' .
    endform. " POPULATE_FIELDCATALOG
    FORM FILL_FIELDS_OF_FIELDCATALOG *
    --> FIELDCATALOG *
    --> P_TABNAME *
    --> P_FIELDNAME *
    --> P_KEY *
    --> P_KEY *
    form fill_fields_of_fieldcatalog tables fieldcatalog
    structure fieldcatalog
    using p_tabname
    p_fieldname
    p_key.
    p_no_out.
    fieldcatalog-tabname = p_tabname.
    fieldcatalog-fieldname = p_fieldname.
    fieldcatalog-key = p_key.
    fieldcatalog-emphasize = '1234'.
    *fieldcatalog-no_out = p_no_out.
    append fieldcatalog.
    endform. " FILL_FIELDSOFFIELDCATALOG
    FORM POPULATE_LAYOUT *
    --> FIELDLAYOUT *
    form populate_layout using fieldlayout type slis_layout_alv.
    fieldlayout-f2code = '&ETA' .
    fieldlayout-zebra = 'X'.
    FOR THE WINDOW TITLE.
    fieldlayout-window_titlebar = 'ALV with Events'.
    fieldlayout-colwidth_optimize = 'X'.
    fieldlayout-no_vline = ' '.
    *fieldlayout-no_input = 'X'.
    fieldlayout-confirmation_prompt = ''.
    fieldlayout-key_hotspot = 'X'.
    This removes the column headings if the flag is set to 'X'
    fieldlayout-no_colhead = ' '.
    *fieldlayout-hotspot_fieldname = 'MAKTX'.
    fieldlayout-detail_popup = 'X'.
    fieldlayout-coltab_fieldname = 'X'.
    endform. " POPULATE_LAYOUT
    FORM SELECTDATA_AND_SORT *
    form selectdata_and_sort.
    select matnr meins mtart matkl from mara
    into corresponding fields of t_mara
    up to 500 rows .
    select matnr maktx spras from makt
    into corresponding fields of t_makt
    where matnr = t_mara-matnr and
    spras = sy-langu.
    select matnr werks minbe from marc
    into corresponding fields of t_marc
    where matnr = t_mara-matnr.
    append t_marc.
    endselect.
    append t_makt.
    endselect.
    append t_mara.
    endselect.
    perform populate_itab1.
    sort itab1 by matnr.
    endform. " SELECTDATA_AND_SORT
    FORM MERGE_FIELDCATALOG *
    form merge_fieldcatalog.
    call function 'REUSE_ALV_FIELDCATALOG_MERGE'
    exporting
    i_program_name = syrepid
    i_internal_tabname = 'ITAB1'
    i_structure_name = 'COLORSTRUCT'
    I_CLIENT_NEVER_DISPLAY = 'X'
    i_inclname = syrepid
    changing
    ct_fieldcat = fieldcatalog[]
    exceptions
    inconsistent_interface = 1
    program_error = 2
    others = 3.
    endform. " MERGE_FIELDCATALOG
    IN THIS FUNCTION THE MINIMUM PARAMETERS THAT WE NEED TO PASS IS AS
    FOLLOWS:-
    i_callback_program --> CALLING PROGRAM NAME
    i_structure_name --> STRUCTURE NAME.
    is_layout --> LAYOUT NAME.
    it_fieldcat ---> BODY OF THE FIELD CATALOGUE INTERNAL TABLE
    form display_alv_list.
    call function 'REUSE_ALV_LIST_DISPLAY'
    exporting
    I_INTERFACE_CHECK = ' '
    i_callback_program = syrepid
    I_CALLBACK_PF_STATUS_SET = ' '
    I_CALLBACK_USER_COMMAND = ' '
    i_structure_name = 'ITAB1'
    is_layout = fieldlayout
    it_fieldcat = fieldcatalog[]
    IT_EXCLUDING =
    IT_SPECIAL_GROUPS =
    IT_SORT =
    IT_FILTER =
    IS_SEL_HIDE =
    I_DEFAULT = 'X'
    THE FOLLOWING PARAMETER IS SET AS 'A' INORDER TO DISPLAY THE STANDARD
    TOOL BAR
    i_save = 'A'
    IS_VARIANT = ' '
    it_events = eventstab[]
    IT_EVENT_EXIT =
    IS_PRINT =
    I_SCREEN_START_COLUMN = 0
    I_SCREEN_START_LINE = 0
    I_SCREEN_END_COLUMN = 0
    I_SCREEN_END_LINE = 0
    IMPORTING
    E_EXIT_CAUSED_BY_CALLER =
    ES_EXIT_CAUSED_BY_USER =
    tables
    t_outtab = itab1
    exceptions
    program_error = 1
    others = 2.
    endform. " DISPLAY_ALV_LIST
    *& Form POPULATE_ITAB1
    text
    --> p1 text
    <-- p2 text
    form populate_itab1.
    loop at t_mara.
    loop at t_makt where matnr = t_mara-matnr.
    loop at t_marc where matnr = t_mara-matnr.
    move-corresponding t_mara to itab1.
    move-corresponding t_makt to itab1.
    move-corresponding t_marc to itab1.
    append itab1.
    endloop.
    endloop.
    endloop.
    endform. " POPULATE_ITAB1
    *& Form FILL_EVENTSTAB
    text
    -->P_EVENTSTAB text *
    form fill_eventstab tables p_eventstab structure eventstab.
    WHEN THE FOLLOWING FUNCTION IS CALLED THE SYSTEM POPULATES THE
    INTERNAL TABLE EVENTSTAB WITH A LIST OF EVENTS NAME.
    AS SHOWN BELOW WHEN USING I_LIST_TYPE = 0 THE FUNCTION RETURNS 14
    EVENTS NAME.
    call function 'REUSE_ALV_EVENTS_GET'
    exporting
    i_list_type = 0
    importing
    et_events = p_eventstab[]
    exceptions
    list_type_wrong = 1
    others = 2.
    BY CALLING THE ABOVE FUNCTION WE FIRST POPULATE THE EVENTSTAB WITH
    THE PREDEFINED EVENTS AND THEN WE MOVE THE FORM NAME AS SHOWN BELOW.
    WE ASSIGN A FORM NAME TO THE EVENT AS REQUIRED BY THE USER.
    FORM NAME CAN BE ANYTHING.THE PERFORM STATEMENT FOR THIS FORM
    IS DYNAMICALY CALLED.
    read table p_eventstab with key name = slis_ev_top_of_page.
    if sy-subrc = 0 .
    move 'TOP_OF_PAGE' to p_eventstab-form.
    append p_eventstab.
    endif.
    read table p_eventstab with key name = slis_ev_top_of_coverpage.
    if sy-subrc = 0 .
    move 'TOP_OF_COVERPAGE' to p_eventstab-form.
    append p_eventstab.
    endif.
    read table p_eventstab with key name = slis_ev_end_of_coverpage .
    if sy-subrc = 0 .
    move 'END_OF_COVERPAGE' to p_eventstab-form.
    append p_eventstab.
    endif.
    read table p_eventstab with key name = slis_ev_foreign_top_of_page.
    if sy-subrc = 0 .
    move 'FOREIGN_TOP_OF_PAGE' to p_eventstab-form.
    append p_eventstab.
    endif.
    read table p_eventstab with key name = slis_ev_foreign_end_of_page.
    if sy-subrc = 0 .
    move 'FOREIGN_END_OF_PAGE' to p_eventstab-form.
    append p_eventstab.
    endif.
    read table p_eventstab with key name = slis_ev_list_modify.
    if sy-subrc = 0 .
    move 'LIST_MODIFY' to p_eventstab-form.
    append p_eventstab.
    endif.
    read table p_eventstab with key name = slis_ev_top_of_list.
    if sy-subrc = 0 .
    move 'TOP_OF_LIST' to p_eventstab-form.
    append p_eventstab.
    endif.
    read table p_eventstab with key name = slis_ev_end_of_page.
    if sy-subrc = 0 .
    move 'END_OF_PAGE' to p_eventstab-form.
    append p_eventstab.
    endif.
    read table p_eventstab with key name = slis_ev_end_of_list .
    if sy-subrc = 0 .
    move 'END_OF_LIST' to p_eventstab-form.
    append p_eventstab.
    endif.
    endform. " FILL_EVENTSTAB
    *& Form FILL_HEADINGTABLE
    text
    -->P_HEADING text *
    form fill_headingtable tables p_heading structure heading
    using tablename.
    case tablename.
    when 'HEADING'.
    p_heading-typ = 'H'.
    concatenate
    ' REPORT NAME:-' syrepid
    ' ABB Industry Pte Ltd' into p_heading-info.
    append p_heading.
    write sy-datum using edit mask '__/__/____' to sydatum.
    concatenate
    ' DATE:-' sydatum ' USER: ' sy-uname 'PAGE NO:' sypagno
    into p_heading-info.
    append p_heading.
    when 'HEADING1'.
    p_heading-typ = 'H'.
    p_heading-info = 'TOP-OF-COVER-PAGE'.
    append p_heading.
    when 'HEADING2'.
    p_heading-typ = 'H'.
    p_heading-info = 'END-OF-COVER-PAGE'.
    append p_heading.
    when 'HEADING3'.
    p_heading-typ = 'H'.
    p_heading-info = 'FOREIGN-TOP-OF-PAGE'.
    append p_heading.
    when 'HEADING4'.
    p_heading-typ = 'H'.
    p_heading-info = 'FOREIGN-END-OF-PAGE'.
    append p_heading.
    WHEN 'HEADING5'.
    P_HEADING-TYP = 'H'.
    P_HEADING-INFO = 'LIST-MODIFY'.
    APPEND P_HEADING.
    when 'HEADING6'.
    p_heading-typ = 'H'.
    p_heading-info = 'END-OF-PAGE'.
    append p_heading.
    when 'HEADING7'.
    p_heading-typ = 'H'.
    p_heading-info = 'END-OF-LIST'.
    append p_heading.
    when 'HEADING8'.
    p_heading-typ = 'H'.
    p_heading-info = 'TOP-OF-LIST'.
    append p_heading.
    endcase.
    endform. " FILL_HEADINGTABLE
    FORM TOP_OF_PAGE *
    form top_of_page.
    call function 'REUSE_ALV_COMMENTARY_WRITE'
    exporting
    it_list_commentary = heading[]
    exceptions
    others = 1.
    endform.
    *& Form FILL_COLORSTRUCT
    text
    -->P_COLORSTRUCT text *
    form fill_colorstruct using p_colorstruct type slis_coltypes .
    p_colorstruct-heacolfir-col = 6.
    p_colorstruct-heacolfir-int = 1.
    p_colorstruct-heacolfir-inv = 1.
    endform. " FILL_COLORSTRUCT
    FORM TOP_OF_COVERPAGE *
    form top_of_coverpage.
    call function 'REUSE_ALV_COMMENTARY_WRITE'
    exporting
    it_list_commentary = heading1[]
    exceptions
    others = 1.
    endform.
    FORM END_OF_COVERPAGE *
    form end_of_coverpage.
    call function 'REUSE_ALV_COMMENTARY_WRITE'
    exporting
    it_list_commentary = heading2[]
    exceptions
    others = 1.
    endform.
    FORM FOREIGN_TOP_OF_PAGE *
    form foreign_top_of_page.
    call function 'REUSE_ALV_COMMENTARY_WRITE'
    exporting
    it_list_commentary = heading3[]
    exceptions
    others = 1.
    endform.
    FORM FOREIGN_END_OF_PAGE *
    form foreign_end_of_page.
    call function 'REUSE_ALV_COMMENTARY_WRITE'
    exporting
    it_list_commentary = heading4[]
    exceptions
    others = 1.
    endform.
    FORM LIST_MODIFY *
    *FORM LIST_MODIFY.
    CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
    IT_LIST_COMMENTARY = HEADING5[]
    EXCEPTIONS
    OTHERS = 1.
    *ENDFORM.
    FORM END_OF_PAGE *
    form end_of_page.
    call function 'REUSE_ALV_COMMENTARY_WRITE'
    exporting
    it_list_commentary = heading6[]
    exceptions
    others = 1.
    endform.
    FORM END_OF_LIST *
    form end_of_list.
    call function 'REUSE_ALV_COMMENTARY_WRITE'
    exporting
    it_list_commentary = heading7[]
    exceptions
    others = 1.
    endform.
    FORM TOP_OF_LIST *
    form top_of_list.
    call function 'REUSE_ALV_COMMENTARY_WRITE'
    exporting
    it_list_commentary = heading8[]
    exceptions
    others = 1.
    endform.
    SHORT DUMP IS
    This error may occur if
    - You address a typed field symbol before it has been set with
       ASSIGN
    - You address a field symbol that pointed to the line of an
       internal table that was deleted
    - You address a field symbol that was previously reset using
       UNASSIGN or that pointed to a local field that no
       longer exists
    - You address a global function interface, although the
       respective function module is not active - that is, is
       not in the list of active calls. The list of active calls
       can be taken from this short dump.
    PLEASE GIVE ME ANSWER.
    REGARDS

    HI I MADE SOME CHANGES TO UR CODE...
    RUN IF THIS IS THE REQ ...
    IN SELECT QUERIES OF RETRIEVING DATA..
    form selectdata_and_sort.
      select matnr meins mtart matkl from mara
      into corresponding fields of TABLE t_mara
    WHERE MATNR = T_MARA-MATNR.
      up to 200 rows .
      IF SY-SUBRC = 0.
        MESSAGE I001 WITH ' DATA RET FROM MARA'.
      ENDIF.
      IF T_MARA[] IS NOT INITIAL .
    select
           matnr
           maktx
           spras
           From
           makt
           into corresponding fields of TABLE t_makt
            FOR ALL ENTRIES IN T_MARA
           where matnr = t_mara-matnr and
           spras = sy-langu.
      ENDIF.
      IF SY-SUBRC = 0 .
      MESSAGE I001 WITH ' DATA RET FROM MAKT'.
      ENDIF.
      IF T_MAKT[] IS NOT INITIAL.
          select matnr
                 werks
                 minbe
                 from marc
                 into corresponding fields of  TABLE t_marc
                 FOR ALL ENTRIES IN
                 T_MAKT where matnr = t_maKT-matnr.
        ENDIF.
    ENDFORM.                    "selectdata_and_sort
    JUST TRY THIS CODE..

  • GETWA_NOT_ASSIGNED short dump when load business partner master data

    Hi
    I've this error GETWA_NOT_ASSIGNED short dump when load business partner master data, it's running in BI 7.0 with support package 12.
    The error is because the field symbol is that pointed to the line of an internal table that was deleted.
    I think that it's an incompatibility between subroutine and unicode.
    Do you have idea about correct this error?
    Regards
    Jose.

    Hi Ravi
    Yes, it's a dump
    It's when running a process chain to load Business partner master data
    The error say:
    -.You address a field symbol that pointed to the line of an internal table that was deleted.
    -.You address a field symbol that was previously reset using UNASSIGN or that pointed to a local field that no longer exist.
    -. You address a global function interface, although the respective function module is not active - that is, is not in the list of active calls. the list of active calls can be taken from this short dump.
    I think that it's for the unicode corversion because I've the last support package 12 installed and the rest of the process chain are running perfect.
    My hotmail mail is [email protected] if you need the screen shot.
    Regards and thanks a lot
    Jose

  • Classic scenario-SC not transferred to backend,short dump in ecc

    hi Guru's,
    Classic scenario, sc not transferred to backend, executed FM bbp_pd_sc_resubmit, short dump occurred in the backend stating call function not found
    please help
    short dump file attached
    regards,
    kiran

    Hi Kiran,
    Could you please send the DUMP for analysis.
    Please try to use this -
    This is the new report BBP_SC_AUTO_RETRANSFER to change the status from
    I1111          Item in Transfer Process
    I1112           Error in transfer/ transmission
    Thanks,
    From RBEI,
    Snehal

  • Time Out Settings in OSB

    Hi All,
    I have a service which calls DB via DB adapter. For the webservice call, I have an option of read time out settings in the business service, so that it will get time out after the configured time period.
    But for the DB call I dont have this option in the business service and we are getting stuck thread exceptions when the legacy is taking more time to respond back. We have a requirement that all the services realted to DB call have to get time out when the legacy takes more time.
    Kindly help me in doing this.
    Thanks and Regards,
    Prabhu

    Hi Anuj,
    I did a sample stored procedure which will wait for number of seconds which we send as input and will send the success repose after the number of seconds.
    StoredProcedure:
    create or replace
    procedure sleep (seconds in number,response out varchar2) as testdata number;
    begin
    testdata := seconds;
    dbms_lock.sleep(testdata);
    response := 'SUCCESS';
    end;
    Business Service XML:
    <?xml version="1.0" encoding="UTF-8"?>
    <xml-fragment xmlns:ser="http://www.bea.com/wli/sb/services" xmlns:tran="http://www.bea.com/wli/sb/transports" xmlns:env="http://www.bea.com/wli/config/env" xmlns:jca="http://www.bea.com/wli/sb/transports/jca" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <ser:coreEntry isProxy="false" isEnabled="true">
    <ser:binding type="SOAP" isSoap12="false" xsi:type="con:SoapBindingType" xmlns:con="http://www.bea.com/wli/sb/services/bindings/config">
    <con:wsdl ref="Sleep2/Sleep_dbBS"/>
    <con:binding>
    <con:name>Sleep_ptt-binding</con:name>
    <con:namespace>http://xmlns.oracle.com/pcbpel/adapter/db/Application1/Project2/Sleep</con:namespace>
    </con:binding>
    </ser:binding>
    <ser:monitoring isEnabled="false">
    <ser:aggregationInterval>10</ser:aggregationInterval>
    <ser:pipelineMonitoringLevel>Pipeline</ser:pipelineMonitoringLevel>
    </ser:monitoring>
    <ser:reporting>true</ser:reporting>
    <ser:sla-alerting isEnabled="true">
    <ser:alertLevel>normal</ser:alertLevel>
    </ser:sla-alerting>
    <ser:ws-policy>
    <ser:binding-mode>wsdl-policy-attachments</ser:binding-mode>
    </ser:ws-policy>
    </ser:coreEntry>
    <ser:endpointConfig>
    <tran:provider-id>jca</tran:provider-id>
    <tran:inbound>false</tran:inbound>
    <tran:URI>
    <env:value>jca://eis/DB/SleepConnection1</env:value>
    </tran:URI>
    <tran:outbound-properties>
    <tran:load-balancing-algorithm>round-robin</tran:load-balancing-algorithm>
    <tran:retry-count>0</tran:retry-count>
    <tran:retry-interval>30</tran:retry-interval>
    <tran:retry-application-errors>true</tran:retry-application-errors>
    </tran:outbound-properties>
    <tran:all-headers>false</tran:all-headers>
    <tran:provider-specific>
    <jca:jca-file ref="Sleep2/Sleep_db"/>
    <jca:adapter-name>Sleep</jca:adapter-name>
    <jca:adapter-type>DATABASE</jca:adapter-type>
    <jca:always-use-wsdl>true</jca:always-use-wsdl>
    <jca:connection-mode>managed</jca:connection-mode>
    <jca:outbound-properties>
    <jca:operation-properties>
    <jca:operation-name>Sleep</jca:operation-name>
    <jca:spec-properties>
    <jca:property>
    <jca:name>ProcedureName</jca:name>
    <jca:value>SLEEP</jca:value>
    </jca:property>
    <jca:property>
    <jca:name>QueryTimeout</jca:name>
    <jca:value>2</jca:value>
    </jca:property>
    <jca:property>
    <jca:name>GetActiveUnitOfWork</jca:name>
    <jca:value>false</jca:value>
    </jca:property>
    </jca:spec-properties>
    </jca:operation-properties>
    </jca:outbound-properties>
    </tran:provider-specific>
    </ser:endpointConfig>
    </xml-fragment>
    When I run this from the business service, if I give the input as 10, we are getting error only after 10 seconds not in the query time out seconds. But the thing is we are getting error. If we set the time as 11 seconds we are getting success response. But our requirement is the procedure has to time out in the specified seconds. Kindly correct me if I am wrong.
    Regards,
    Prabhu

  • Short dump because of start routine.

    Hi ,
    I have a start routine to delete the certain records of Source package based on some condition .
    My code is supposed to delete the source package when the 0DOC_CATEG ( Documant category )
    is equal to 'B' or 'G'.Below is my code :
        LOOP AT SOURCE_PACKAGE into <SOURCE_FIELDS> .
          *IF   <SOURCE_FIELDS>-DOC_CATEG EQ 'B'
            *OR <SOURCE_FIELDS>-DOC_CATEG EQ 'G'. 
            DELETE SOURCE_PACKAGE from <SOURCE_FIELDS> .
          ENDIF.
        ENDLOOP.
    There is no synatx error but at the runtime when executing DTP, it throws short dump.
    Could somebody tell me what is the issue and if there is any alternate way of code .
    Thanks,
    Vels

    Hi siggi,
    The short dump is as follows:
    Runtime Errors         GETWA_NOT_ASSIGNED
    Error analysis
        You attempted to access an unassigned field symbol
        (data segment 32774).
        This error may occur if
        - You address a typed field symbol before it has been set with
          ASSIGN
        - You address a field symbol that pointed to the line of an
          internal table that was deleted
        - You address a field symbol that was previously reset using
          UNASSIGN or that pointed to a local field that no
          longer exists
        - You address a global function interface, although the
          respective function module is not active - that is, is
          not in the list of active calls. The list of active calls
          can be taken from this short dump.

  • Short dump in EXIT for ME21N

    Hi,
    In PO creation (ME21N/ME22N), i wanted to call custom report, mean while I have implemented one exit
    "MM06E005 ->EXIT_SAPMM06E_006", in that, I called Z-program, in which a statement
    call screen 100.
    is there, which is causing the short dump.
    Short dump Details:
    The system attempted to use dynpro 0100 in program "SAPLXM06".
    This dynpro does not exist.
    In the same manner, if I call another function module it is not happening.
    Please suggest me.

    My actual Intension is to popup a screen with a report in ME21N(PO creation), for that I have generated one normal report and called that report from the Exit I have told previously, In that report I have created 100 screen and called it.
    When I am creating a PO, the screen calling statement there, is throwing a short dump.
    Hope now you understood Everything.
    Thank you for responding.

  • Import javax.microedition.io.HttpConnection times out

    Hello,
    This is in a BlackBerry JDE application.
    The call to 'openInputStream' always times out, as does,
    connection.getResponseCode(); or
    connection.getType();
    try {
    String URL = "http://www.google.com/index.html";
    HttpConnection connection = (HttpConnection)Connector.open(URL);
    connection.setRequestMethod(HttpConnection.GET);
    InputStream is = connection.openInputStream(); // this times out
    catch (Exception exc) {
    String s = exc.getMessage();
    Any ideas? Thanks.

    not so much the import part, I copied the package include declaration to get the full name.

  • Urgent: Data Loading error(Load failed with Short Dump) caller 70 missing

    Hi please go through the error occured.
    <b>"Request is still running.
    Diagnosis:
    No error could be found. The current process has probably not finished yet.
    System Response:
    The ALE Inbox of the SAP BW is identical to ALE Outbox of the source System and /or the maximum wait time for this request has not yet run out and/or the batch job in the cource system has not ended.
    current status
    in the source sytem."</b>
    Update mode: Full, processing Online.
    I think we processed the infopackage in the online. if we process it in the back ground then we won't face any problem. Singal turns to Red.
    Please guide us. we need to load it immidiately.
    Thanks in advance.
    Regards,
    Nagesh.
    Message was edited by: Nagesh Ganisetti
    Message was edited by: Nagesh Ganisetti

    Hi Friends,
       at last the load has Terminated with Short Dump. Can any one guide me how can i reslove this. we could see the data in PSA.
    i'm sending the part of the short dump.
    Too many parameters specified with PERFORM.                                                                               
    What happened?                                                                               
    In a subroutine call, there were more parameters than in the  routinedefinition.                                                                         
    Error in ABAP application program.                          
    The current ABAP program "GP3KGSUXARXPB2F9YCR4B3MFPT6 " had to be terminated because one of statements could not be executed.                    
    This is probably due to an error in the ABAP program.                       
    What can you do?                                                                               
    Print out the error message (using the "Print" function)                                    
    and make a note of the actions and input that caused the                                    
    error.                                                                               
    To resolve the problem, contact your SAP system administrator.                              
    You can use transaction ST22 (ABAP Dump Analysis) to view and administer                    
    termination messages, especially those beyond their normal deletion                        
    date.                           
    is especially useful if you want to keep a particular message.                              
    Error analysis                                                                               
    A PERFORM was used to call the routine "VALUE_TO_SID_CONVERT_DB" of the program             
    "GP3KGSUXARXPB2F9YCR4B3MFPT6 ".                                                            
    This routine contains exactly 7 formal parameters, but the current                       
    call contains 8 actual parameters.                                                          
    parameters.                                                     
    How to correct the error                                         
    Correct the PERFORM call. You can find out where the call occurs in the section "Active calls / events".
    You may able to find an interim solution to the problem                                     
    in the SAP note system. If you have access to the note system yourself,                     
    use the following search criteria:     
    Please guide me.
    Regards,
    Nagesh.
    Message was edited by: Nagesh Ganisetti

Maybe you are looking for