Caller 70 missing

hi experts,
i ran the info package for ODS, in the status tab , it is saying the message like caller 70 missing
System Response"Caller 70" is missing.
Hint: Further analysis:
Search the BI short dump overview for the short dump that belongs to the request. Pay attention to the correct time and date on the selection screen.
You access a short dump list using the wizard or the menu path "Environment -> Short dump -> In the Data Warehouse".
Inprocess monitor under details tab
under transfer str following statement is red
Data Package 1 : arrived in BW ; Processing : Processing not yet finished, entry 70 still missing
Can you please tell me what is entry 70 still missing
regards
kumar

Hi Kumar,
My solution is:
1. delete the ominous Request ID from DSO,
2. change in Manage to Reconstruction tab,
3. set the traffic light to green for this request in monitor Status tab,
4. Reconstruct/Insert button on Reconstruction tab for this Request ID.
Then wait & pray
After this request become green on Request tab (in Manage), all of the following Precess Chain steps has done.
Rgds,
SoftVeres
Edited by: Istvan Veres on Dec 2, 2010 2:36 PM

Similar Messages

What is this command script called missing kitty that initiated out of nowhere on my macbook pro?

What is this command script called missing kitty that initiated out of nowhere on my macbook pro? It says it was created by a former Apple genius and it showed up 3 days after I had to have my macbook wiped clean and re-installed at the Genius bar due to a "software glitch" that locked up my firmware....

https://discussions.apple.com/thread/2404816?start=0&tstart=0
at the Apple Store called "Missing Kitty" that would allow you to install a script on the root level of the HD. After installing everything and making a user it would go in and delete the user so on the next restart the computer would start up a "brand new" and already have iLife installed.
You can always call the genius bar for clarification
Genius reservation http://www.apple.com/retail/geniusbar/

Edit LabVIEW VI Call Missing Names

All of the sudden, when viewing the VI Parameter Table in the Edit LabVIEW VI Call, the Name column is missing and I can not expand any of the clusters. It's as though the COM/ActiveX link is somewhat broken.
I have previously configured many VI links using the Parameter Table and have mapped many individual cluster elements to TestStand items, but now I can not even expand the clusters (because the name column is completely missing) to view the mappings. Everything seems to run fine, and the mappings still seem to exist, but I can no longer view or edit them, and I can not see the name column for existing configurations or new ones.
Thanks,
Martin

Hi Martin,
If you put your mouse in the area with the red mark, near Type, your mouse cursor will change. Then, you can expand the name column, even though it is currently hidden.
Message Edited by AEDavid on 02-19-2007 11:44 AM
Cheers,
David Goldberg
National Instruments
Software R&D
Attachments:
mouse.JPG ‏57 KB

Lumia 625 Blinking Light - Msg/Calls Missed

Does the Lumia 625 have a light that flashes to show you have missed a call or msg ?

Hi netball,
Thank you for posting and Welcome to Nokia Forum!
Just like what farby has answered on your phone, this feature is not supported by the phone. However, you can share this feedback and idea through this: Notification Light.

Compile error std::pair . Is copy ctor call missed?

#include <vector>
struct A {int a;};
struct B : public A {char b;};
int main()
B b;
typedef std::pair<A*, A*> MyPair;
std::vector<MyPair> v;
v.push_back(std::make_pair(&b, &b)); //compiler error here(pair<B*,B*>)
return 0;
}error : formal argument x of type const std::pair<A*, A*> & in call to std::vector<std::pair<A*,A*> >::push_back(const std::pair<A*, A*> & ) is being passed std::pair<B*, B*>
There should not be any error because 1) std::pair<B*,B*> created 2) std::pair<A*,A*> from 1. copy-created.

The default libCstd is not fully conforming to the C++ standard. In particular, it is missing features that require class member templates. The issue is discussed in the C++ FAQ section on library compatibility:
[http://developers.sun.com/sunstudio/documentation/ss12u1/mr/READMEs/c++_faq.html#LibComp]
You can use the optional STLport library, which has this missing functionality, by adding the option -library=stlport4 to every CC command line, compiling and linking. You cannot mix libCstd and STLport in the same program. If you use STLport, everything must be compiled using STLport, including any libraries linked to your program.

Keep getting missed calls/missed group calls

Something really strange has been happening for the past week or so. I keep getting missed calls/group calls from "Bastian" and "Anonymous", none of these people are on my contact list and my iphone never rings when they try and call me. I just get a notification to say "missed call". The strange thing is when I swipe the notification to check my skype history none of these calls exist. There is never a missed call on skype for desktop either. On my desktop I have my privacy set to "only allow contacts to call me". Please explain what is going on with these ghost calls and how I can prevent this?

Hi, I've got the same problem. Tried everything including contacting the person and asking to leave me alone. Nothing seems to work. Hopefully someone knows the solution

Calls Missing from Call Log

I just got a Palm Pre Plus from verizon last week and I've noticed one bug and wonder if anyone else has noticed:
For some reason some of my calls don't show up in the call log afterwards. I haven't exactly pinpointed when this happens but I've noticed it happen to calls I've placed as well as calls that I've ignored. This seems to be a pretty big bug to me.
I'll do some tinkering and see if I can pinpoint exactly what causes this bug to arise.

TerriB wrote:
geek46 wrote:
TerriB wrote:
Ray....thanks for sanity check. Its June 2 and still no logs. I have to prove something to a police officer who says he called me to discuss a neighbor issue we have and I have nothing on my phone that says he called so I need to check 'missed calls'. I don't have a reason to check the logs too often so this is frustrating me....grrr. I can see placed calls and voice mail but thats all and here is what it says and seems to me they 'think' there is a problem and not just a maintenance or updating issue? "Sorry, call logs are temporarily unavailable. We're working on fixing the problem." Hi TerriB!!!! You may need to call into Comcast, enter the trouble ticket to Tier1 and then Tier2.... something tells me that if you haven't been able to see anything for this long, there is something not quite right in the backend coding of your Voice Account.... somewhere a "link" is missing in your MISSED calls database location to report on the online page.... Hope they can fix it for you!!!!! -=Ray=-Ray, I went on Comcast chat and they told me "As of the moment, our engineers are currently upgrading our online features that is the reason why you are prompted with that error message." My cr** detector went off. I need to know if you can see yours please. I asked if everyone's logs are affected and the answer was YES......NOT TRUE!!!! I can see all of my logs in the S FL market... <Shame on them> !!!! -=Ray=-

RFC Call: Missing namespace declaration

Dear experts,
I have a file to RFC scenario. I imported the RFC and create files exactly according to the RFC structure, so I don't use a mapping. When I create a file, it provides the following error in the adapter log:
<i>Exception caught by adapter framework: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get functionname from XML requst: com.sap.aii.af.rfc.RfcAdapterException: failed to read funtionname from XML document: missing namespace declaration(2)</i>
What do I need to do to fix this.
Thanks in advance!

This is the whole message:
I created my own interface and mapped it to the RFC:
This is the message. Now it successfully pass XI and the adapter sais it is delivered.
BUT nothing is seen in the target system... how is that possible???
<?xml version="1.0" ?>
<ns:MT_TO_CREATE xmlns:ns="urn://cchbc/w2/xi/mes/warehousetransfer">
<LGNUM></LGNUM>
<TIMEST>20071207094550.0000000</TIMEST>
<WERKS>4510</WERKS>
<ZLAST>0</ZLAST>
<ZSCID>SCANPRD4</ZSCID>
<I_LTAP>
<item>
<EAN11>5449000003096</EAN11>
<LETYP>E2</LETYP>
<VSOLM>48.000</VSOLM>
<LENUM>00345101239500010930</LENUM>
<VFDAT>2008-12-11T00:00:00</VFDAT>
<WDATU>2007-12-07</WDATU>
<ZLINE>830</ZLINE>
<ZTIME>09:43:32</ZTIME>
<BRGEW/>
</item><item>
<EAN11>2229000058744</EAN11>
<LETYP>E2</LETYP>
<VSOLM>48</VSOLM>
<LENUM>00000000003000002961</LENUM>
<VFDAT>2008-12-11T00:00:00</VFDAT>
<WDATU>2007-12-07</WDATU>
<ZLINE>830</ZLINE>
<ZTIME>09:44:01</ZTIME>
<BRGEW/></item><item>
<EAN11>2229000058744</EAN11>
<LETYP>E2</LETYP>
<VSOLM>48.000</VSOLM>
<LENUM>00000000003000002978</LENUM>
<VFDAT>2008-12-11T00:00:00</VFDAT>
<WDATU>2007-12-07</WDATU>
<ZLINE>830</ZLINE>
<ZTIME>09:44:32</ZTIME>
<BRGEW/></item></I_LTAP></ns:MT_TO_CREATE>
And the output is:
<?xml version="1.0" encoding="UTF-8" ?>
- <ns1:ZWM_TO_CREATE xmlns:ns1="urn:sap-com:document:sap:rfc:functions">
<LGNUM />
<TIMEST>20071207094550.0000000</TIMEST>
<WERKS>4510</WERKS>
<ZLAST>0</ZLAST>
<ZSCID>SCANPRD4</ZSCID>
- <I_LTAP>
- <item>
<EAN11>5449000003096</EAN11>
<LETYP>E2</LETYP>
<VSOLM>48.000</VSOLM>
<LENUM>00345101239500010930</LENUM>
<VFDAT>2008-12-11T00:00:00</VFDAT>
<WDATU>2007-12-07</WDATU>
<ZLINE>830</ZLINE>
<ZTIME>09:43:32</ZTIME>
<BRGEW />
</item>
- <item>
<EAN11>2229000058744</EAN11>
<LETYP>E2</LETYP>
<VSOLM>48</VSOLM>
<LENUM>00000000003000002961</LENUM>
<VFDAT>2008-12-11T00:00:00</VFDAT>
<WDATU>2007-12-07</WDATU>
<ZLINE>830</ZLINE>
<ZTIME>09:44:01</ZTIME>
<BRGEW />
</item>
- <item>
<EAN11>2229000058744</EAN11>
<LETYP>E2</LETYP>
<VSOLM>48.000</VSOLM>
<LENUM>00000000003000002978</LENUM>
<VFDAT>2008-12-11T00:00:00</VFDAT>
<WDATU>2007-12-07</WDATU>
<ZLINE>830</ZLINE>
<ZTIME>09:44:32</ZTIME>
<BRGEW />
</item>
</I_LTAP>
</ns1:ZWM_TO_CREATE>

RFC Call Missing

I am a novice at this and would like to get some suggestions from the gurus in this forum. I am trying to integrate an RFC call CTS_API_CREATE_CHANGE_REQUEST. But I do not see this RFC call using SE37. So I have two basic questions.
1) Is there a transaction that I can use to see a list of all RFC calls that are available in my R/3 system ?
2) Do I have to do anything to enable RFC calls, to be invokable from outside the SAP system ?
TIA
Yogi.

Ok, I am posting this for the benefit of everyone.
I figured out a mechanism by which all RFC and BAPI calls within an R/3 system can be listed.
1) Invoke Transaction SE37
2) With the cursor on the 'Function Module' field press F4.
3) In the popup that shows , press the 'Information System' button on the task bar at the bottom. Its the one with the 'Binocular' graphic.
4) Another popup called "R/3 Repository Information System: Function Modules" opens up.
5) The third icon from the right of the task bar at the bottom reads "All Selections". It is a white icon, with a green mark and a black down arrow. Click on that.
6) You now get an advanced search screen with lots more options than the ones previously displayed.
7) One of the radio's says "RFC modules", another checkbox says "Only modules for BAPI".
8) Set whatever you are interested in and hit the "Check"
Enjoy.
Thanks,
Yogi

I cant see calls/missed calls under "Phone". how do i fix??

I just upgraded my 3gs on 3.1.3 to 4.1 and now when I get a call it wont show up under phone, only on my lock screen before I unlock it then it's like I never got a call. Already tried restoring turning off and resetting, doesn't work. Can any one help??

Have you tried basics from the manual?
Restart.
Reset.
Restore.

Questions re: missed calls iphone5

Past few days (so far not today) have had numerous missed calls. No ring, just discover later that a call was missed. Caller tells me it either rang a few times then went to vm or sometimes immediately to vm. I want my iphone 5 to notify me and then remind me every few seconds that I have a missed call (missed calls are more important to me and my business than a text message, which does remind me). No settings to set this up. Summary: two issues... (1) why missed calls; and (2) how to be notified and reminded.

HB-Mike, I know that this would concern me just the same and we definitely want to get this figured out for you. Does this happen in all locations or just specific areas? More often occur while indoors or outdoors? Let's make sure that the Do Not Disturb setting is on, take a look here to see how http://www.verizonwireless.com/support/knowledge-base-64978/.
AdamG_VZW
Follow us on Twitter @VZWSupport

6700 slide missed call & message alerts problem

If there is a missed call or message when the keypad is locked I dont see any lights blinking or D-Pad lights blinking. Is there a way that phone gives us a alert on missed call or messages as how it is in 6700 classic (D-Pad lights blinking untill we take a look at the alert)
Any suggestions
Ferdin

I've finally got an ap called Miss Calls Reminder - this is for missed calls and texts. It is on the Ovi store. You have to ID your phone etc., then it asks you to send to phone. The problem is when you get a text with a link for the ap from Ovi and click on it it says it's not available for your model. Instead go the webpage which is mentioned Tektronic - you will see the ap, download it to your pc. It's not free - think it's around £4.00. Once you've downloaded to your pc, then plug your phone in - can't remember what I did next - something to do with Nokia Application Installer on Nokia PC Suite. Anyway you will see the logo - so transfer it from pc to phone. Then you will have option for a trial or buy. Took me three goes to buy it. When you have it on your phone under menu, applications you then enable it and change the settings. What a god send. I nearly missed a really important job 'cos I didn't here text coming in and didn't check phone and had 5 minutes to accept the job. So you can change the settings to get a visual reminder and an alert tone for calls and texts, or just texts. You you can set it to say 15mins and then set the warning tone as long as you want.

I am missing calls without notification

I am missing calls to my iPhone with out notification. My girlfriend called me and it rang on her end and then it went to voicemail. I have had other calls missed, but those people would leave a voicemail and then I would get a notification. Why is that?

No this is not new. I dont know how many calls I've missed, because no one has said anything except for my girlfriend. She sent me a text right after the said attempted call.
I have not contacted my carrier. I'll do that now.

Calling java-class from c++ misses

Hello,
if I call a java-class from c++-code and the java-class imports a package (not java packages, but writen by myself), then the calling misses :-(
If I call this class without the imports - it works!
C++-Code:
    jclass cls = env->FindClass(javaClassname.c_str());
    if (cls == 0) {
          //error     - cls is 0 if the java-class has imports
    }Java-Includes:
import mypackage.Conn;
import mypackage.Para; I set the classpath to the .jar-files. Did I forget anything else?
Thx...

Hello,
if I call a java-class from c++-code and the
java-class imports a package (not java packages, but
writen by myself), then the calling misses :-(
If I call this class without the imports - it works!
C++-Code:
jclass cls =
env->FindClass(javaClassname.c_str());
if (cls == 0) {
/error     - cls is 0 if the java-class has imports
code]
Java-Includes:import mypackage.Conn;
import mypackage.Para;
I set the classpath to the .jar-files. Did I forget
anything else?
Thx...
From the JNI Specification: http://java.sun.com/j2se/1.5.0/docs/guide/jni/spec/jniTOC.html
=======
FindClass
jclass FindClass(JNIEnv *env, const char *name);
This function loads a locally-defined class. It searches the directories and zip files specified by the CLASSPATH environment
variable for the class with the specified name.
LINKAGE:
Index 6 in the JNIEnv interface function table.
PARAMETERS:
env: the JNI interface pointer.
name: a fully-qualified class name (that is, a package name, delimited by �/�, followed by the class name).
If the name begins with �[� (the array signature character), it returns an array class.
The string is encoded in modified UTF-8. ==============================
So, to find the Conn class, you need to use:
env->FindClass("mypackage/Conn");

Photoshop CC: Missing Fonts on Startup, only a few fonts are displayed as replacement options

I have a Photoshop document which uses some Fonts that I don't have on my Windows PC. When I open the document, I get a Dialog Box called "Missing Fonts", which states:
"Some fonts used in this document are missing. You can sync matching fonts from Typekit, or replace missing fonts with a default or different font used in this document"
This text suggests that I can only replace missing fonts with other fonts already being used in this document. However, I want to replace a missing font with a font that is not yet used in this document. Why can I only replace a missing font with another font already used in the document? For example, I want to replace "Helvetica Neue" with "Liberation Sans", however Liberation Sans is not offered in the Dropdown box, even though it is installed, as it is not yet used in the document. What is the point of only allowing to replace a missing font with a font that is already used in the document, and not with any font installed on the system??
Thanks,
best regards,
Chris

I'm a windows user so I do not know the Adobe Photoshop environment on the Mac or the versions of Mac OS. The only suggestion I could make would then be try using Adobe Cleaner to clean off Photoshop then install Photoshop Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

How can I evenly split incoming calls between 2 employees without a shared voicemail?

I need to load balance a low volume of calls between 2 DNs.
Incoming calls need to be evenly split between Employee1 and Employee2. If they don’t answer the call, it needs to go to their personal voicemail, not a common voicemail account.
I think the Hunt pilot and line group is what I want, and I can utilize a circular distribution, but my only hurdle is voicemail. I can get voicemail to go to a single account, but I need a method to simply split incoming calls to 2 employees, and (if no answer), drop into their personal voicemail.
I cannot figure this out, any suggestions?
I’m running CUCM 9.02, Unity Connection 9.02, and UCCX v10 (I mention UCCX as a tool I could leverage, Employee1 and Employee2 are not agents or part of a call center)
Thanks for any assistance.

Queuing is not enabled. I have no desire to queue the calls.
In the Hunt Pilot settings:
When I chose “Do Not Forward Unanswered Calls”, calls drop after (what appears to be) the Line Group’s RNA Reversion Timeout is met. Never goes to voicemail.
The same when I select “Use Forward Settings of Line Group Member”.
If I select “Forward Unanswered Calls to” and manually select my VM pilot DN, missed calls finally go to Unity Connection, but not to any voicemail account. If I add the Hunt Pilot number as an alternate extension to Employee1’s unity account, then all unanswered calls will drop into Employee1’s personal account, even the calls missed by Employee2. This is not the desired solution. I need Employee2 ‘s voicemail account to answer the calls missed by Employee2 as well as Employee1’s voicemail account to answer the calls missed by Employee1.
This brings me back to my original question. Is there a way to get this to work with Hunt pilots and line groups, or should I be trying something else? I just need calls to DN:111 split 50/50 between 2 DNs (DN for Employee1, and DN for Employee2), and have missed calls drop into the personal voicemail of the DN that missed the call.
I’m hoping someone who has gotten this to work can share their Hunt Pilot and Line Group settings.
Thanks again.

Caller 70 missing

Similar Messages

Maybe you are looking for