Caller ID on TV does not work.

This feature has become so unreliable that I have had to make several calls and send emails to Verizon. The last tech promised me that the problem was resolved for ever, but alas, the problem has returned. No caller ID on TV. It works OK on my phone displays, but not on the TV. Did anybody have any luck resolving this issue permanently? If so, how?
This issue was last resolved under ticket{edited for privacy} on Oct. 14, 2011.

PreciousBella wrote:
My just changed to the Digital Voice and my caller ID is not appearing on my TV screen either. I asked the tech and they said to make sure the it was enabled. I did and it was but I am still not getting caller ID on my screen. If anyone has figured out how to make it work, please share. Thanks
Worked for me
http://forums.verizon.com/t5/Home-Phone-Landline-or-Digital/How-to-get-Caller-ID-on-TV-working-again...

Similar Messages

HT203712 I have a 2011 tahoe. My bluetooth functioned properly until I updated my iPhone. Now the iPhone connects to the Tahoe but when I try to call a number it does not work. Either it cals the number and has no outgoing or incoming sound or it just

I have a 2011 tahoe. My bluetooth functioned properly until I updated my iPhone. Now the iPhone connects to the Tahoe but when I try to call a number it does not work. Either it cals the number and has no outgoing or incoming sound or it just says it iis unable to complete the call.

I would check with the Auto dealer where the vehicle was purchased to check and see when the bluetooth software was last updated on your vehicle. With the vehicle being a 2011 and if the software has not been updated since the dropping of IOS 7 then obviously there will be software incompatibilities.
Good luck.

I called Verizon prior to travelling abroad and asked to turn roaming on. As of today, 4 days later, I have no service. I do not have a landline to call. GlobalServices email does not work... Does anybody know how to reach customer support via email?

I called Verizon prior to travelling abroad and asked to turn roaming on. As of today, 4 days later, I have no service. I do not have a landline to call support. GlobalServices email does not work... Does anybody know how to reach customer support via email?

Hi Florence2014
I'm so sorry your having issues. Unfortunately there isn't an email for global support. The only way way to reach them while traveling is to call them at 908-559-4899.
JoeL_VZW
Follow us on Twitter @VZWSupport

Calling SAP Web Services does not work

Hi,
using this little program, I try to get a simple "Hello World" from a webservice in SAP.
require 'soap/rpc/driver'
s = SOAP::RPC::Driver.new('http://server:port/sap/bc/srt/rfc/sap/Z_WS_RUBY/', 'urn:sap-com:document:sap:soap:functions:mc-style')
s.add_method("Z_WS_RUBY", "StringIn" )
p s.Z_WS_RUBY("World")
Unfortunately there is an error:
in `parse_local': unknown namespace qualifier: xml (XSD::NS::FormatError)
     from D:/rubyy/InstantRails/ruby/lib/ruby/1.8/soap/encodingstyle/soapHandler.rb:532:in `decode_attrs' ETC
In the WebService Recorder I find that the call is going through with request:
<?xml version="1.0" encoding="utf-8" ?>
- <env:Envelope xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
- <env:Body>
- <n1:Z_WS_RUBY xmlns:n1="urn:sap-com:document:sap:soap:functions:mc-style" env:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
<StringIn xsi:type="xsd:string">World</StringIn>
</n1:Z_WS_RUBY>
</env:Body>
</env:Envelope>
but response ist like:
- <soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/">
- <soap-env:Body>
- <soap-env:Fault>
<faultcode>soap-env:Client</faultcode>
<faultstring xml:lang="en">Operation not supported</faultstring>
</soap-env:Fault>
</soap-env:Body>
</soap-env:Envelope>
What am I mssing here ?
Any help is appreciated.
Regards
Marcus
Message was edited by:
        Marcus Schiffer

Hi,
I am using SAP WAS Rel. 7.0. SAPWAS is of 0.11.
Couldnt retype your exact example, but I hope it works with my simple program too.
I activated the trace, here the result:
ignored element: Feature
ignored element: useFeature
Wire dump:
= Request
! CONNECT TO myserver:myport
! CONNECTION ESTABLISHED
POST /sap/bc/srt/rfc/sap/Z_WS_RUBY?sap-client=800&sap-language=EN HTTP/1.1
SOAPAction: "urn:sap-com:document:sap:rfc:functions"
Content-Type: text/xml; charset=utf-8
Authorization: Basic gzhtfzu=
User-Agent: SOAP4R/1.5.5 (/146, ruby 1.8.6 (2007-03-13) [i386-mswin32])
Date: Thu, 14 Jun 2007 08:14:05 GMT
Content-Length: 332
Host: myserver:myport
<?xml version="1.0" encoding="utf-8" ?>
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<env:Body>
    <n1:ZTestWsRuby xmlns:n1="urn:sap-com:document:sap:rfc:functions">
      <STRINGIN>dd</STRINGIN>
    </n1:ZTestWsRuby>
</env:Body>
</env:Envelope>
= Response
HTTP/1.1 500 Internal Server Error
set-cookie: sap-usercontext=sap-language=EN&sap-client=800; path=/
set-cookie: sap-recorder_sid=%2cc%3dID6-95D8115601C54670F9E2221A00000000--1%2co%3jhggz; path=/; domain=mydomain
content-type: text/xml; charset=utf-8
content-length: 264
sap-srt_id: 20070614/101842/v1.00_final_6.40/466FCFE5847D01C50000000095D81156
server: SAP Web Application Server (1.0;700)
<soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/"><soap-env:Body><soap-env:Fault><faultcode>soap-env:Client</faultcode><faultstring xml:lang="en">Operation not supported</faultstring></soap-env:Fault></soap-env:Body></soap-env:Envelope>
The call does not ecven go through to the Function Module in SAP.
Here is the call that worked from my VB Program:
<?xml version="1.0" encoding="utf-8" ?>
- <env:Envelope xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
- <env:Body>
- <n1:ZTestWsRuby xmlns:n1="urn:sap-com:document:sap:soap:functions:mc-style" env:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
<STRINGIN xsi:type="xsd:string">wert</STRINGIN>
</n1:ZTestWsRuby>
</env:Body>
</env:Envelope>

Linux script call from PL/SQL does not work?

We are trying to run a simple Linux command using this PL/SQL 10.2 procedure:
PROCEDURE run_linux_script_from_oracle IS
    BEGIN
      dbms_scheduler.create_job
          job_name=>'runtop',
          job_type=>'executable',
          job_action=>'/vol0/FileLoadDir/Bank/DATA_FILES/spell_check.sh',
          enabled=>true,
          auto_drop=>true
      DBMS_OUTPUT.PUT_LINE('Successful');
    EXCEPTION
      WHEN OTHERS THEN
        DBMS_OUTPUT.PUT_LINE('Error: ' || SQLERRM);
    END;The .sh file has this command which works fine when we run in Linux.
spell /vol0/FileLoadDir/Bank/DATA_FILES/ebill2.fmt_form_strings_.txt > /vol0/FileLoadDir/Bank/DATA_FILES/abcd.txtI get a Successful when I run this command in my SQL*Navigator and a PLS-00225: subprogram or cursor 'ABS' reference is out of scope when I run it in the SQL*Nav in another machine???
Any help would be greatly appreciated.

Channa wrote:
We are trying to run a simple Linux command using this PL/SQL 10.2 procedure:NO, posted procedure below RUNS nothing,
post code simply CREATE JOB, but does NOT invoke it!
>
PROCEDURE run_linux_script_from_oracle IS
BEGIN
dbms_scheduler.create_job
job_name=>'runtop',
job_type=>'executable',
job_action=>'/vol0/FileLoadDir/Bank/DATA_FILES/spell_check.sh',
enabled=>true,
auto_drop=>true
DBMS_OUTPUT.PUT_LINE('Successful');
EXCEPTION
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE('Error: ' || SQLERRM);
END;EXCEPTION handler is BUG & should be removed, discarded & 100% eliminated.
>
The .sh file has this command which works fine when we run in Linux.
spell /vol0/FileLoadDir/Bank/DATA_FILES/ebill2.fmt_form_strings_.txt > /vol0/FileLoadDir/Bank/DATA_FILES/abcd.txtI get a Successful when I run this command in my SQL*Navigator and a PLS-00225: subprogram or cursor 'ABS' reference is out of scope when I run it in the SQL*Nav in another machine???What is "ABS" & why/how does it exist in error message?

Web Service Call with Basic Authentication does not work

If I try to use Basic Authentication in my Web Service Client with the automatically created methods
setUsername(inUserName)
setPassword(inPassword)
setAddress(inAddress)
the application does not make a call. Did I forget something?
Is it possible to use "Test Method" with Basic Authentication?
Thank you.

Thank you for your answer.
But: I already read this article. And it doesn't help me.
I use the following code:
            getMyServiceClient1().setUsername(inUserName);
            getMyServiceClient1().setPassword(inPassword);With this code I always get a java.lang.NullPointerException.
The methods setUsername and setPassword are definded as follows:
public void setUsername(String inUserName) {
        myStub._setProperty(Stub.USERNAME_PROPERTY, inUserName);
public void setPassword(String inPassword) {
        myStub._setProperty(Stub.PASSWORD_PROPERTY, inPassword);
}But if I look at the methods which are generated automatically by Sun Java Studio Creator I cannot find _setProperty.
I also found this thread in your forum:
http://swforum.sun.com/jive/thread.jspa?forumID=123&threadID=54773

[JAXM] Several call to same servlet does not work

I have a working jaxm client, which works fine. But for test purpose I wanted to send several requests to my server using the same connection.
If I do // Send the message
reply = connection.call(message, endpoint); it works fine.
But if I try this:// Send the message
reply = connection.call(message, endpoint);
// Send it again
reply = connection.call(message, endpoint);the first call success, but the second one crashes and
I get the following exception in my client :java.io.FileNotFoundException: http://localhost:7001/SOAPRPCRouterServlet
        at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:545)
        at java.net.HttpURLConnection.getResponseCode(HttpURLConnection.java:230)
        at com.sun.xml.messaging.client.p2p.HttpSOAPConnection.post(HttpSOAPConnection.java:203)
        at com.sun.xml.messaging.client.p2p.HttpSOAPConnection$PriviledgedPost.run(HttpSOAPConnection.java:110)
        at java.security.AccessController.doPrivileged(Native Method)
        at com.sun.xml.messaging.client.p2p.HttpSOAPConnection.call(HttpSOAPConnection.java:89)And the following one in my server (weblogic 5.1) :Fri Jan 04 11:13:58 CET 2002:<E> <HTTP> Connection failure
java.net.SocketException: Connection shutdown: JVM_recv in socket input stream read
        at java.net.SocketInputStream.socketRead(Native Method)
        at java.net.SocketInputStream.read(SocketInputStream.java:86)
        at weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:209)
        at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:23)
        at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:129)I tried to build a new message, but the result is exaclty the same.
Does I do things in the wrong way (maybe connection must be closed and reopen for each message, but I didn't found anything about this in the doc) or is it a bug in JaxM ?

I have a possible suggestion. The reference implementation sends a SOAP message via the HTTP protocol. The standard HTTP protocol approach is to open a connection, perform the operation, and then close the connection. I have a feeling that once you have used the SOAPConnection object to send and retrieve the message, the underlying HTTP connection is automatically closed.HTTP is a stateless protocol so once the server has delivered the request, it closes the connection and has no memory of the reuqest. Hence you cannot send subsequent requests on the same HTTP connection, any attempts to do so result in the errors that you see. What you will have to do is open up a new SOAPConnection object for each new message sent.
Hope this helps.

Express Planning: Call up Planning Round does not work

Dear all,
in Express Planning I have set-up a new Planning round.
When I try to call it up in the portal with the button "Call Up Planning Round", the site cannot be found.
I get the following error message:
Page not found or not available
In the header of the window you can read "http://myserver:50000/?NavigationTarget=ROLES%3A%2F%2Fportal_content%2Fcom.sap.pc"
What can I do to find out, why the page is not there? Is this a customizing error or an installation error?
Thank you for your advice.
Best regards Timo

I found out that my new iPhone has terrible reception, even in places with supposedly good coverage. It turns out that it’s because of certain settings that I didn’t configure properly. After I changed them, all was good again!
So if your iPhone is like mine and you see “Call Ended” and then “Call Failed” immediately after trying to dial out from your iPhone, even though there’s a good signal (i.e. you can see signal bars, so you are connected to your carrier). Then relax, because there probably is no problem with the phone — you PROBABLY just need to do these 2 steps:
1) Go to Settings > General > Date and Time. Switch off “Set Automatically” and manually select your hometown (the default is Cupertino). If you dont change it, you will not be able to make outgoing calls. But the wierd part is, you will still be able to receive incoming calls. Once done, manually set the date and time, and restart your iPhone. If you want, you can reset the 2 settings to “Set Automatically” again.
2) Next, go to Settings > Phone > Show My Caller ID > Switch this to “ON”. Usually with these steps, things should be okay already. If not, you have to turn off “Call Forwarding” and “Call Waiting” as well.
Hope that helps!

Sample Java WebDynPro calling Customer Details BAPI does not work

Hi,
I have created a sample application (referring SAP's tutorials for Java WebDynPro) which invokes the BAPI_BUPA_ADDRESS_GETDETAIL Bapi.( for reading Customer Address details)
I've made only one view which takes in BusinessPartner as the input and a form for the output.
Have created a model for this purpose and a custom controller.
I've mapped the appropriate fields for both the contexts of View and the Custom Controller.
The Application has been built and deployed on the server. The Jco connections have been configured and tested.
However, Nothing happens when the user enters a business partner input and clicks on the related button to bring up the output.
This WebDynPro has been designed the exact same way as the SAP provided tutorial at
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/28113de9-0601-0010-71a3-c87806865f26?rid=/library/uuid/49f2ea90-0201-0010-ce8e-de18b94aee2d#15 [original link is broken]
Code has been implemented in the implementation tabs of the view and the custom controller the same way too.
Any ideas?
Thanks,
Raman

Implementation tab of Custom Controller
public void wdDoInit()
    //@@begin wdDoInit()
    Bapi_Bupa_Address_Getdetail_Input input = new Bapi_Bupa_Address_Getdetail_Input();
    wdContext.nodeBapiCall().bind(input);
    input.setBusinesspartner(new String());
    //@@end
public void executeBapi( )
    //@@begin executeBapi()
    try
         wdContext.currentBapiCallElement().modelObject().execute();
         wdContext.nodeOutput().invalidate();
    catch (Exception ex)
         ex.printStackTrace();
    //@@end
Custom Controller Binding With Model
Context
*BapiCall
    *Output
       *Bapiadtel $$$
         *Field A
         *Field B and so on
    *BusinessPartner $$$
Fields marked with $$$ above are mapped to Bapi_Bupa_Address_GetDetail_Input's Bapiadtel and BusinessPartner.
View Binding with Custom Controller
Context
*BapiStart
    *Output
       *Bapiadtel @@@
         *Field A
         *Field B and so on
    *BusinessPartner @@@
Fields marked with @@@ above are mapped to BapiCall's(Custom Ctrllr) Bapiadtel and BusinessPartner.
Thanks.

Hp scanner software Scan 3 does not work with osx yosemite

The older software called HP Scan 3 does not work with OSX 10.10. Where can I download an update for this software?

Hello @ringie,
Welcome to the HP forums.
I understand that you would like to scan from your Photosmart premium C410 to your Mac 10.10.
I would like to help.
There is currently no updated software.
Try the following work around.
Scanning in OS X v10.10 Yosemite without HP Software
Hope this helps get you scanning.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

CIT200 Internal mic does not work??

I am using the CIT200 under WIndows 7. It connects fine to Skype and drivers are installed OK. When I call, the internal mic does not work (phone's internal speaker is fine), but when I plug in a headset, the headset mic (and speaker) works just fine. Does this mean the internal mic is physically damaged, or is there anything I can do software vise to get it to work?

Hmmm, well never tried to make the CIT200 software on a Virtual PC, but you can give a try and check if that solves your problem or not.

HT1933 I need a refund for an apps wich does not work

I need an immediate refund for an apps call SLOVAK TV it does not work!!!

Step 1: Contact the Developer.
Step 2: Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
Note: All sales are final.

My microphone does not work on calls on my iPhone 4

Don't ask me what has happened and I have been through all of the troubleshooting that I can on my own.
I have no clue how to get a hold of a LIVE AT&T person or APPLE person.
The problem is my microphone does not work when I use the telephone, whether I make the call or someone calls me. It is NOT the MUTE button. And yes, I have already rebooted my iPhone about 5 times now. Has not fixed it either.
But the microphone DOES work as I was able to record a new voicemail greeting to let people know my phone isn't working.
So, they could call me all day long but they won't hear me, so who do I call using my landline (thankfully I kept it).
It is the day after Thanksgiving and I would be a fool to head over to the Apple Store or the AT&T Store....
Thank-you,
Marcia

Try disconnecting the headphones and then adjusting the volume, does it say headphones?
There might be something in the headphone jack, maybe lint, dirt, or something else in there.
Take a look at this Apple document for more information -> iPhone: Can't hear through the receiver or speakers

Subvi does not work properly when called inside a vi

Hello Every body
thanks for your help. i am using a sub vi for sine signal generation. as a vi it works fine. but when i called this subvi inside another VI it gives some problems. for example timer indicator works properly.it reinitializes as well in the sub vi, but in the main VI it does not work properly. means does not count the time.in the sub vi on the fly i can change the values of frequency and amplitude in real time, but when i use as sub vi, it does not reponse as i change the values in the control arrays.similarly pause and continue works properly in the sub vi, but once again in the main VI, it does not work properly.graph indicator also work properly in the sub vi. but here once again it does not work properly in the main VI.the pause resume indicator also does not blink, when it is continue. in the subvi it blinks very well.generally why the sub vi does not work properly inside the VI?i am sending my VI and sub vis.
any tips would be highly appreciated.
thanks
Regards
Attachments:
vi.zip ‏87 KB

I just want to add some more details to Dan's answer. The subVI is acting exactly like you've coded it. The mistake is in understanding how subVIs work. When you call a subVI (or a function in any other language), you pass some parameters to it, the subVI does it's thing and returns values. the subVI does not accept new parameters from the calling VI until it returns to the caller and the caller runs the subVI again. In your case, you have a subVI with a while loop. You have some front panel control wired to the subVI's stop terminal. When first called, the value is false. So the subVI will keep running until the subVI's stop button becomes true but you cannot change it from main until the subVI finishes and returns so the subVI will never stop. As Dan says, the solution is pass references of front panel controls to the subVI and have the subVI monitor those references for changes and to update references to indicators on Main. You subVI does not need any front panel controls or indicators of it's own.

My iphone 6 connects to the car via bluetooth, the music works good, but the phone calles does not work. It looks like it is working but doesn't. I have tried in my Hyundai and a Dodge rent car and get the same results. I updated the last 8.0.2.

My iphone 6 connects to the car via bluetooth, the music works good, but the phone calls does not work. It looks like it is working but doesn't. I have tried in my Hyundai Sonata and a Dodge Dart rent car and get the same results. I updated the last 8.0.2. It worked the first day i had the phone, and then i updated to Ios 8.0.2 and it quit working.
Now when i get in the car, it acts like it is connected and makes the same call it was on after syncing to bluetooth, but it really isn't on a call. This is happening on both cars.
Does anyone know if this is the phone and i need to take it to Apple or if there is an issue that Apple is working on getting a fix for?
My son in law has the exact same phone as me, we both got the on 10/6, he had a Dodge Dart and his is working via bluetooth.
Someone HELP please, as i consider this a safety issue by not having my calls go to bluetooth.

We had the same problem, but figure out the solution.
You MUST have at least 1 song added to your ITUNE! After you add a free song, then everything else should work as normal!
Hope this helps!

Caller ID on TV does not work.

Similar Messages

Maybe you are looking for