Caller Id with Landline No Longer Working - Called Verizon 4 times without success

I have a Verizon landline account (no Fios) and the caller id has stopped working.   I first tried using their help desk and went through the automated process of resetting it but that did not work.  Then I've tried 3 other times while speaking to a technician at Verizon and each time they say the service is activated and then close the trouble ticket without verifying that it actually works.  It's been going on for two weeks now with no decent help from Verizon.  Does anybody know how to fix it?
Thanks.

Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you.Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under “My Support Cases” you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis as the agent may be waiting for information from you before they can proceed with any actions. To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe".
Please keep all correspondence regarding your issue in the private support portal.

Similar Messages

  • "Open with Explorer" no longer works with IE 10 & 11 without 32-bit -- What alternative do we have?

    I know that if we open SPS 2010 in IE 10 & IE 11 in 64-bit O/S, "Open with Explorer" no longer works because this function requires 32-bit version of IE.
    I give up to find a way to open IE 10 in 32-bit -- I had tried several so-called solutions but none works for me.  So, I'm looking for an alternative: is there an URL that I can put in
    Windows Explorer's address bar to open the SharePoint page directly?
    I had tried http://mysps/somefolder/etc/      failed!
    I had tried \\mysps\DavWWWRoot            failed again!
    So, I would like to hear to those who have succeeded to use "Open with Explorer" with IE 10 or 11 installed in 64-bit O/S.

    Hi Horinius,
    According to your description, my understanding is that "Open with Explorer" didn’t work with IE 10 & 11 in SharePoint 2010.
    I  commend you use IE 10 or 11 32-bit rather than 64-bit. Then check whether the browser SharePoint add-ons are enabled. If  not, please enable them.
    You can check browser add-ons by opening IE->Tools->Programs->Manage add-ons-> check all add-ons related to SharePoint, such as SharePoint OpenDocuments Class. If there is not any add-on related to SharePoint, please repair your Office by clicking
    Control Panel->Programs and Features-> select your Office, and right-click it, then select ‘Change’.
    Please make sure that webClient service is running on your machine by opening Start->Administrative Tools->Services.
    Here are some similar posts for you to take a look at :
    http://social.technet.microsoft.com/Forums/en-US/233c285b-1359-4d2b-82bf-009565bf93da/sharepoint-open-with-explorer-not-working?forum=sharepointadmin
    http://wmostafaw.wordpress.com/2011/12/08/opening-list-or-document-library-in-windows-explorer/
    http://stackoverflow.com/questions/8926551/your-client-does-not-support-opening-this-list-with-windows-explorer
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • HT1329 My old computer with itunes no longer works.  If I hook my ipod to my new computer will I lose all the songs on the ipod?

    My old computer with itunes no longer works.  If I hook my ipod to my new computer will I lose the songs that are on it now?

    Yes, you will.
    Do you have the songs still?
    You could add them to your new library if you do.

  • Help with Places no longer working in iPhoto 9

    Since an update about a month ago, Places no longer works with iPhoto 9 version 8.1.2 (424). Where GPS data is present, the map tries to open but all I get is a dull green screen where the map should be. My Nikon View software Geotag works with the same images so the problem appears to be with iPhoto. Has anyone any idea on how to fix it? Would upgrading to iPhoto 11 solve it?

    Search teh forums some have reported that removing the cache in Safari resolves this issue
    LN

  • Since an automatic update the "Post to Vodpod" button (supposedly developed in concert with Firefox) no longer works, how do I get it back?

    The "Post to Wordpress widget from http://vodpod.com/wordpress no longer works after Firefox did an automatic, unrequested update.

    The button sounds like it sends a video to vodpod.com but that doesn't match what I see for the extension. The other two extensions came up with a search for vodpod but don't specifically mention vodpod.
    * Flash Video Downloader - Youtube Downloader :: Add-ons for Firefox<br>https://addons.mozilla.org/en-US/firefox/addon/flash-video-downloader-youtube/
    * Easy YouTube Video Downloader :: Add-ons for Firefox<br>https://addons.mozilla.org/en-US/firefox/addon/easy-youtube-video-downl-10137/
    * Share Video :: Add-ons for Firefox<br>https://addons.mozilla.org/en-US/firefox/addon/share-video/

  • Dialing shortcuts with commas no longer work in iOS 8; how to fix?

    In iOS 7 I would use a dialing short cut for all of my conference calls as this allowed a nice easy way for people to dial into meetings hands free. There has always been the option of using the semicolon (;) which requires another touch by the user or using commas (,) as pauses which can get you through all the prompts on a conference line without having to type any information. iOS 8 quit reading the commas and will only hyperlink the phone number prior to the commas. Are there any workarounds for this?
    This series of numbers: 8881234567,,,12345678#,# used to work as a hyperlink and was in the subject line and the body of the message. The user of the device didn't have to do anything other than touch the hyperlink on the calendar notification and it would complete the full dialing sequence for them.
    The text remains the exact same as above however now only the 8881234567 is a hyperlink. I can use the semicolon but it is really inconvenient if you are driving and have to use your screen..
    This behavior happens in Calendar, Mail, Notes, etc. The only place that this will work is if it is directly copied into the dialing field on the Keypad screen of the phone.
    Are there any work arounds? Or this is just two steps backward that we have to live with?

    Yes, this is VERY painful after a few days of using Safari: Having to close one window at a time. Ugh.

  • BB Link with Q10 no longer working on Windows 8

    Mobile carrier:  Bell Mobility
    Model info and OS version:  Q10, 10.1.0.238
    Blackberry Link version: 1.1.0.37
    Free space: 9.7 Gb
    Battery pull: Battery pull did not resolve issue
    Factory reset:  I would like to explore all of my other options before blindly doing a factory reset
    Steps to reproduce: Just connect Q10 via USB to Windows 8 laptop. Launch Blackberry Link.
    Expected Results: Expected to be able to communicate with BB Q10 and to performance backups, but can no longer able do so.
    Actual Results: Cannot login to BB ID via BB Link or perform any types of synching or backup operations.
    Description:
    I was able to communicate with my BB Q10 on Windows 8 briefly.  Now, Q10 no longer communicating with Blackberry Link desktop software on Windows 8. Also, when clicking on the settings gear icon, I'm getting the message in Blackberry Link "Unable to sign in to your Blackberry ID. Confirm you are connected to the Internet and try again."   I am able to sign in to BB ID online without issue. Blackberry Link also takes a very long time to load (several minutes).
    Thank you,
    Shawn
    Bell Mobility, Q10, O/S 10.1.0.238

    Hello Shawn,
    Welcome to the BlackBerry Support Community.
    Thank you for your question regarding the connectivity issue you are experiencing with detecting your BlackBerry Q10 smartphone in BlackBerry Link.
    Please complete the steps in the following article: http://www.blackberry.com/btsc/KB02206 Reinstall the application using the suggestions under the additional information section.
    Verify that the application is not being blocked in any security software/firewall on your computer upon completion of the reinstallation.
    Let us know if this helps.
    -FB
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click "Accept as a Solution" for posts that have solved your issue(s)!

  • Sync with ical no longer working

    Upgraded 2nd-Gen itouch to OS 3.1.1 from 3.0. Also upgraded iTunes to 9.0. yesterday. Using G4 (dual Core) pre-Intel chip desktop tower.
    Had tried the mobile me trial starting three days ago. Sync between Mobile Me screwed up iCal and so cancelled sync same day. Had to recover ical data from back up. Synced with iTouch fine - though messed up my color associations on calendar on iTouch.
    iTouch no longer syncing with iCal (or rather changes & additions not showing up in ical).
    Using Spanning Sync to update Google Calendar. The updated calendar events from the iTouch are showing up in google Calendar as a result of the sync between iCal and google Calendar.
    iTouch is primary day-timer with back-up to iCal.

    As an addition to my first post here, I did also attempt to register my iTouch with Mobile me. I thought that I had completed the registration, but the account does not appear in the accounts listing in the calendar/mail/contacts section of settings. This suggests to me that either:
    1) I did not 'save' the account settings, or
    2) the account will not actually show in the listing.
    I only make mention because as I continue to peruse for solutions to my issue, I noted that if using Mobile me to sync between computer & Mobile Me and iPhone/iTouch & Mobile me it appears that the sync between the computer & iPhone/iTouch needs to be disabled.
    I make be reaching for straws, but this is one of the ideas I have that might resolve my syncing issue between iCal and my iTouch. Is there any way of identify in Mobile me if I did register the Mobile Me account with the iTouch - just in case it doesn't show in the iTouch when it is supposed to?

  • Calendar items with Actions no longer work

    It appears that actions attached to a calendar item are now completely broken or just missing. I can no longer attach a custom action to run on a calnedar event, and items on my calendar that had actions no longer seem to have them attached. Was this really completly removed?

    I believe your suggestion is exactly right.  I ended up tossing the whole Motion folder - which was probably empty except for those presets.  I realized that some miscommunication between FCP X and Motion was involved, when the generators began reappearing in FCP X, once I opened a copy of one in Motion, but disappeared again, when I closed Motion.
    I believe Apple was quite right to recommend putting the new versions on a separate startup volume, but getting rid of those presets was enough to get everything working again for me.
    Thanks!

  • Pages 5, Merging with Contacts no longer works

    I hate re-typing addresses that I have already in my Contacts. The function of automatically merging single or multiple addresses has become worst ever since the first versions of good old Claris Works; it seems that in the new Pages, Apple has eliminated this feature alltogether, am I wrong?  

    Thanks Ed, but of course you understand that your proposed work-around is not practical for anyone needing to wordprocess seriously, and that is what computers are supposed to be.
    In the old days of the first versions of ClarisWorks, what you did was to select ("find") your addresses, go back to your letter and simply "merge-print". The nice thing then was that you could configure the spaceholders in your letter form to move "left" or "left+up"  in case of empty fields in addresses. This way, your final letter address would always look perfect, no unwanted spaces, etc. In the address file, you furthermore had available simple calculation in each field to do such calcs as " =if (name is "company", "Dear Sirs") etc. This allowed to do very clever serial letters and individual-looking mass-mailings.
    Later updates of CW, later Apple Works sorely missed these features, so I shifted to MS Works. With OSX and the then new Address Book, I returned in the hope that things would get more professional, only to see that Apple keeps on neglecting even te most simple features you need in an office; I am now preparing to go back to MS.
    If one remove the Apple-colored glasses, one will realise none of their Apps is seriously and continously groomed these days. I close my post, thank you all.  

  • Effects with clips no longer work

    After a few days with FCP X, all transitions and templates that use video clips as part of the effect, stopped working.  Skimming the effects in the browser results in a blue screen.

    I believe your suggestion is exactly right.  I ended up tossing the whole Motion folder - which was probably empty except for those presets.  I realized that some miscommunication between FCP X and Motion was involved, when the generators began reappearing in FCP X, once I opened a copy of one in Motion, but disappeared again, when I closed Motion.
    I believe Apple was quite right to recommend putting the new versions on a separate startup volume, but getting rid of those presets was enough to get everything working again for me.
    Thanks!

  • Screen Saver with Flickr no longer working

    I don't really enjoy seeing the same nature photos during the screen saver and I enjoy entering search terms via Flickr. This used to work. Now after 2-3 of the Flickr photos the screen saver reverts right back to the default nature photos, so I'm stuck seeing that polar bear swimming underwater and that flock of pink flamingos.

    If I go the xmlpserver page I get the standard HTTP 404 Not Found Page.
    I am using OC4J and it is running.
    This is all on my laptop.
    The contents of the XMLP configuration file are as follows:
    <?xml version="1.0" encoding="UTF-8" ?>
    - <xmlpConfig xmlns="http://xmlns.oracle.com/oxp/xmlp">
    <property name="SAW_SERVER" value="SIMSSHP" />
    <property name="SAW_SESSION_TIMEOUT" value="90" />
    <property name="DEBUG_LEVEL" value="exception" />
    <property name="SAW_PORT" value="9704" />
    <property name="SAW_PASSWORD" value="Administrator" />
    <property name="SAW_PROTOCOL" value="http" />
    <property name="SAW_VERSION" value="v4" />
    <property name="SAW_USERNAME" value="Administrator" />
    <property name="SAW_URL_SUFFIX" value="analytics/saw.dll" />
    </xmlpConfig>
    There is no entry for SECURITY_MODEL.
    Thanks for your help
    Regards
    Steff

  • Sync'ing contacts with Outlook no longer works

    Ipod Nano 4gb with latest iTunes 7.02.16. Problem was also present on previous version of iTunes.
    At one time, for a while after I bought my iPod nano, I could sync my Outlook contacts. It used to popup a message in Outlook asking for permission and I would say, yes, 10 minutes or whatever.
    Now iTunes just keeps saying "Cannot sync contacts with Outlook, try closing all instances of Outlook and restarting" but that suggestion does not solve the problem.
    Anybody know how to fix this?
    cheers,
    steve
    Dell D5150   Windows XP Pro   Pentium D

    You should probably post your question in the iTunes or iPod discussions

  • Why is synchronizing iTunes with apps no longer working?

    Ever since my last iPhone update, I have not been able to synchronize apps from iTunes to my iPhone 4.  I now have to buy and move my apps directly from my phone, not from iTunes.  Has anyone else had this problem or know how to solve it?

    Do you also have the latest iTunes 11.1.3?
    Are you using Windows or Mac?

  • Linksys E1200 No Longer Working After Verizon Modem Replacement

    I have a new Linksys E2100 that was working well with an old Verizon modem. Then recently that modem gave up the ghost and I was issued another one (Westel Model 6100G). I have no problems with internet connectivity when connecting directly from my harddrive to the Verizon modem. I am also not having trouble connecting to the Linksys routher as I am able to see my wireless connection with no problem. However, when I try to set up the connnection with the E2100 in the loop (yes, it's connected correctly) I no longer have internet access.
    I tried de-installing and re-installing the Linksys software (thinking maybe there was some new configuration that would be auto-detected with a new set-up), but this didn't help. I suspect that if the problem is with my Linksys router and not with my Verizon modem that there might be something that could be done to reconfigure something manually but I do not know enough about connections and wireless systems to trust myself not to mess something up.
    At this point I'm assuming it's a Linksys issue since I know that my Verizon modem can connect me to the internet, so works properly. Is there some known incompatibility with this Linksys model and the Westell 6100G modem? Any advice how to proceed from here?

    JHStup wrote:
    I want to add that I:
    1) Have not yet tried returning my router to factory settings. (Is this step necessary? Is this usual, that the router needs to be returned to factory settings if the modem it was formerly connect to changes?)
    2) I did do all of the power-down/reboot modem instructions per the router's software instructions.
    Hello, yes reset and reconfigure. Just download the latest version of Cisco connect 1.4. That will set up the router for you and will update the router if needed. You can download it here http://homesupport.cisco.com/en-us/support/routers/E1200.

Maybe you are looking for

  • Neo2 platinum Encountering Stability Problems /w dual channel memory

    Hello, Recently I built my first computer ever, see bottom.  After getting windows installed I then had problems with installing other programs and general stability issues.  I tried reinstalling windows and after the reinstall I got the same problem

  • Reminder not working in horizontal mode.

    How to use Reminder "horizontal" mode ?

  • No TV Shows on my apple TV

    I don't see the menu option for TV shows on my Apple TV - anyone know why?

  • Problems with Window Screen Grabs?

    Hey, Any idea what the problem could be? When I screen grab a fullscreen window by typing "Command > Shift > 4 > Space" the resulting screenshot has the right hand edge cut off. Seems to happen in all apps. It only happens when an app window is full

  • Bug in Oracle JDBC Drivers with {ts ?}

    Oracle fails to set bind variables correctly when using the {ts ?} in an insert. It works ok if you use {d ?}. Ex: String st = "INSERT INTO BL(NM,TSTAMP) VALUES (?,{ts ?} )"; System.out.println(dbConn.nativeSQL(st)); java.sql.PreparedStatement stmt =