Calling a report from the form shows SSO page

Hi all,
When a form calls a report, the single sign-on screen apears and the report is not generated until a valid SSO account is provided, can this be bypassed ?
Oracle 9iAS R2 is used on Windows 2000 platform and forms/reports 9i
Thanks in advance

Any one has an idea ?

Similar Messages

Calling a Report from a Form

I have uploaded my form to the app server and compiled to Linux. I have copied my RDF file to the reports_path/demo directory. I can run the report via a link from our portal using the URL as follows:
/reports/rwservlet?report=IndRpt.rdf&desformat=pdf&destype=cache&userid=' target="_blank"
That opens the report in a separate window, which is what we want. So far, so good.
I can run the form via a link from our portal as well using the URL as follows:
/forms/frmservlet?config=bsc_ind
The config section hides all the form parameters very nicely.
In the portal, I created a Report Server Access portlet, REP_OMHAST2_MIDTIER, and use the following set_report_object calls in my form:
repid := find_report_object('IndRep');
SET_REPORT_OBJECT_PROPERTYrepid,REPORT_EXECUTION_MODE,BATCH);
SET_REPORT_OBJECT_PROPERTYrepid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,CACHE);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTYrepid,REPORT_SERVER,'rep_omhast2_midtier');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,ls_param);
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED') LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
/*Display report in the browser*/
WEB.SHOW_DOCUMENT('http://omhast2.omh.state.ny.us:7777/reports/rwservlet/getjobid'||
substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=rep_omhast2_midtier ','_blank');
All that comes right out of the white paper.
Now here's the weird part, I have never seen this before. When I click my "Show Report" button in my form, the report seems to be running, but then I get a very strange dark grey, square icon superimposed over my mouse pointer. The icon has a small yellow "starburst" pattern with a tiny red exclamation point inside. The report does not appear on screen.
Incidentally, all of this works correctly when I run the same scenario on my workstation using the call to rwserver as: rwserver server=rep_omhast2_midtier. But when we port it to the app server, it does not run. I think it has to be in the way the form calls the report because the report will run as a stand-alone object.
Anything apparent to anyone out there?

Well, it looks like I stumped the band. And with good reason. Sorry for the error. The problem was that the user running the form and the report had a pop-up blocker that was blocking the report. The form and the report ran from another machine. I allowed pop-ups from the report's URL and that enabled the report to appear.
So, here we have another example of how to call a report from a form. Again, I am sorry for any angst this may have caused.

URGENT!!! calling crystal reports from oracle forms 10g

Is it possible to call crystal reports from oracle forms 10g?
Can someone help to answer how, if there is a solusion, to call crystal reports from oracle forms 10g.
Please provide codes with details showing step by step.
Thanks

hi
try something like this.
DECLARE
charWinHandle VARCHAR2(50);
numWinHandle NUMBER;
BEGIN Set_Application_Property(Cursor_Style,'BUSY');
charWinHandle := Get_Item_Property('Control.Rep',Window_Handle);
numWinHandle := To_Number(charWinHandle);
:Item('Control.CrystalReport1').OCX.Crystal.Crysta lReport.WindowParentHandle
:= numWinHandle;
:Item('Control.CrystalReport1').OCX.Crystal.Crysta lReport.WindowState := 2;
:Item('CONTROL.CRYSTALREPORT1').OCX.Crystal.Crysta lReport.Connect
:= 'DSN=;UID=' || Get_Application_Property(UserName) ||
';pwd=' || Get_Application_Property(password) || ';dsq=;';
Crystal_CrystalCtrl.ReportFileName( :Item('Control.CrystalReport1').interface,
'C:\Sample_Rep.Rpt' );
Set_Window_Property( Forms_Mdi_Window, Window_State,Maximize );
Set_Window_Property( 'MAIN', Window_State, Maximize );
:reptitle := 'Report Preview Window';
numWinHandle := Crystal_CrystalCtrl.PrintReport( :Item('Control.CrystalReport1').interface );
Set_Application_Property(Cursor_Style,'DEFAULT');
END;NOTE: Change the report name and path according to your required file name and path in
the "Crystal_CrystalCtrl.ReportFileName" method call. Also, the connection string shown
assumes that you will use the current USER and PASSWORD for the Form.
- To make the above Form generic so that you can run any Crystal report from it, then create
a parameter for the report name and pass it to the Form using CALL_FORM from any other Form.
Then just replace the file name with the passed parameter.
-. Run the Form
If its correct/helpful please mark it thanks.
sarah
Edited by: S@R@h on Nov 27, 2009 6:33 AM

**How to call a report from a form by passing a specfic value?????

Hi Expert,
I want to call a report from a form.My problem scenario like, a user is login to his account and there is a option called ADMIT CARD(Push Button).Now when he pressed the button a report will generate.I want that when he pressed the button the user id of the user will passed to the report and the report will generate corresponding to his details which was stored in the database.This scenario is like any online admit card.
Suppose I want a details report of employee whose employee_id=100.How could I pass this value(employee id) to report which will generate a report details.
Thanks,
TAPAN
Message was edited by:
user630863

Thanks for replying.
Actually I am a beginner.I think that I have to use RUN_REPORT_OBJECT built-in.But I cannot understand the parameterlist.Can u plz give me any example or code then I am very thankful.
Suppose I want a details report of employee whose employee_id=100.How could I pass this value(employee id) to report which will generate a report details.
Thanks,
TAPAN

Calling a report from oracle form 10g

how to call a report from oracle form 10g

Please see the link:
http://www.oracle.com/technology/products/forms/pdf/10g/frm10gsrw10g.pdf

Run Oracle reports from the FORM builder

Hello All,
We have Oracle Form base application running on the window OS.
(Form version is 9.0.4.1.0)
Our Database is installed on Linux box (DB version: 10.1.0.3.0)
I need to run different Oracle reports from the form based application or from the form builder. (Report Builder 9.0.4.1.0)
Any feed back will be appreciated.
Regards,
D

try this
Run_product(REPORTS,' <path to the report>', ASYNCHRONOUS, RUNTIME, FILESYSTEM,' ',NULL);
in some event ( whichever event you want your report to show up)

Problem while calling a report from the report

Hi
i want call a report from the report, i have written URL in the Hyperlink and its working
but
1) i want open it in the diffrent window.
2) suppose if u have a report called emp it should call antoher 2 report at a time.
( how to put 2 URL in the hyperlink?).
i,e if i press a hyperlink it should open emp1 and emp2
Please help me.
thanks and regards

Thanx,
I have solved this problem.
Regards,
Hafeez

Executing the report from the form

I am getting the following error while executing a report from the form, and the destination format is excel
RWRBE60.exe - Application Error
The exception unknown software exception (0xc00000fd) occurred in the application at location 0x64aa591a.
Click on OK to terminate the program
Click on CANCEL to debug the program
OK Cancel

im having same problem when i use long report file names. like when i use report name my_very_long_long_report_name.rep this problem occurs..
i reduced this to my_short_report_name.rep it never occurs, it happend in lot of reports.
Regards

How to run the 9I report from the forms menue 9i

how to run the 9I report from the forms menue 9i.
Shehzad Latif

Hi,
1. create a Reports Object node in Forms. If you use teh same object node name then you can write generic code that works in all Forms
2. Get the whitepaper about Forms/reports integrtion
http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
Frank

Calling a report from a form and outputting to the screen.

Hi all, I created a report from the Report node in Forms called Monthly_rep. It points to a .rdf file on the server that produces a monthly usage report. When run from Reports Builder both the web and paper version are fine.
I have a button on a form using the When-Mouse-Click trigger, here is the code:
declare
     report_id     Report_Object;
     report_job_id     VARCHAR2(100);
begin
     report_id:= find_report_object('monthly_rep');
     SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_EXECUTION_MODE,RUNTIME);
     SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_COMM_MODE,ASYNCHRONOUS);
     SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESTYPE,CACHE;
     SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_SERVER,'rskei015');
     report_job_id:=run_report_object(report_id);
     END;
When run, when the button is clicked, I get some disk activity and then nothing happens. If I change the "SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESTYPE" attribute to screen I get a FRM-41214 unable to run report message displayed.
I am not fussed if the report runs as a web style or paper style, I just want to get it to work ... for now LOL.
Do the "SET_REPORT_OBJECT_PROPERTY" settings in the trigger override the settings in the report node ?
Any help greatly appreciated.
Kevin

You can use WEB.SHOW_DOCUMENT. See http://www.oracle.com/technology/products/forms/pdf/10g/frm10gsrw10g.pdf
There you'll find a complete example of RUN_REPORT_OBJECT with WEB.SHOW_DOCUMENT.

Calling report from the form

I,am using developer 2000 ver.1.32 always i develop new forms and reports,but in my recently developed form which calls a report in the same directory i am getting this message:
REP-0110: Unable to open file 'PEER_PEE'.
REP-1070: Object store failure occurred.
REP-0110: Unable to open file 'PEER_PEE'.
End report PETR_PRM [Mon Jul 31 09:35:37 2000].
and didn't get in the decomentation any solve.
so can anybody can help me.

thank you
mr: Abouzaid
it worked properly,
i added the report path to the reports_path in the oracle.ini.
thank you again mr: Abouzaid.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Abozaid Abdelmeged ([email protected]):
hi
Please make sure that your reports directory
was defined on report_path on registry first.
thanks alot
Abouzaid<HR></BLOCKQUOTE>
null

Calling a report from a form based on procedure

I created a form based on a procedure.
It is a entry form where the user is selecting or enters data then on submit I must display the report based on selected data.
I know I can simply create a report with all bind variable and do the job.
My question is what is the syntax to call the report from the procedure for the selected parameters values.
Thanks
Lawrence

If you want to display other HTML page after successful submission, you need to use
either go or call method.
I created a form on SCOTT.EMP and a report on SCOTT.EMP and the report accept a parameter for
the deptno. Here is my on successfull submission code:
declare
l_dept number;
l_url varchar2(2000);
begin
l_dept := p_session.get_value_as_number('DEFAULT', 'A_DEPTNO', 1);
l_url := 'scott.rpt_mask_1.show?p_arg_names=emp.deptno&p_arg_values='| |l_dept;
go(l_url);
end;
null

Call Oreacle report from Oracle form

Hi,
I need call a Oracle report from Oracle Form and found the the following procedure from this forum. I have 2 parameters 'start_date' and 'end_date' passing to called report. The following example just have onle parameter
'departmentno' passing. Is that mean I need to call add_parameter twice like the following?
add_parameter(plid, ''start_date' , TEXT_PARAMETER,:control.start_date);
add_parameter(plid, ''end_date' , TEXT_PARAMETER,:control.end_date);
In the following example:
add_parameter(plid, 'departmentno', TEXT_PARAMETER,to_char(:dept.deptno));
Thanks for clarification!!
Michael
PROCEDURE pass_parameter
IS
plid paramlist;
the_param varchar2(15) := 'tmpdata';
BEGIN
plid := get_parameter_list(the_param);
/* check if 'tmpdata' exists */
IF NOT id_null(plid) THEN
destroy_parameter_list(plid);
END IF;
/* if it does destroy it */
plid := create_parameter_list(the_param);
/* create it afresh */
add_parameter(plid, 'departmentno', TEXT_PARAMETER,to_char(:dept.deptno));
/* associate the param in the form with the param in the report */
add_Parameter(plid, 'PARAMFORM', TEXT_PARAMETER, 'NO');
/* to suppress the parameter form displaying */
run_product(REPORTS, /* product name */
'formrep.rdf', /* Oracle Reports module */
SYNCHRONOUS, /* communication mode */
RUNTIME, /* execution mode */
FILESYSTEM, /* location of the Reports module */
plid, /* handle to the parameter list */
null
END;

this my code on when_button_press
declare
rec_grp recordgroup;
col1 groupcolumn;
col2                    groupcolumn;
col3                    groupcolumn;
col4                    groupcolumn;
col5                    groupcolumn;
col6                    groupcolumn;
col7                    groupcolumn;
col8                    groupcolumn;
pl_id paramlist;
i number :=1;
begin
rec_grp := find_group('emp_rec');
if not id_null(rec_grp) then
delete_group(rec_grp);
end if;
rec_grp := create_group('emp_rec');
col1 := add_group_column('emp_rec','Empno',CHAR_COLUMN,8);
col2 := add_group_column('emp_rec','Ename',CHAR_COLUMN,30);
col3 := add_group_column('emp_rec','job',CHAR_COLUMN,15);
col4 := add_group_column('emp_rec','Mgr',CHAR_COLUMN,8);
col5 := add_group_column('emp_rec','Hiredate',DATE_COLUMN,10);
col6 := add_group_column('emp_rec','Sal',CHAR_COLUMN,10);
col7 := add_group_column('emp_rec','comm',CHAR_COLUMN,10);
col8 := add_group_column('emp_rec','Deptno',CHAR_COLUMN,4);
loop
go_block('emp_r');
go_record(i);
add_group_row(rec_grp,i);
set_group_char_cell('emp_rec.empno',i,:emp_r.empno);
set_group_char_cell('emp_rec.ename',i,:emp_r.ename);
set_group_char_cell('emp_rec.job',i,:emp_r.job);
set_group_char_cell('emp_rec.mgr',i,:emp_r.mgr);
set_group_date_cell('emp_rec.Hiredate',i,:emp_r.Hiredate);
set_group_char_cell('emp_rec.sal',i,:emp_r.sal);
set_group_char_cell('emp_rec.comm',i,:emp_r.comm);
set_group_char_cell('emp_rec.deptno',i,:emp_r.deptno);
i := i + 1;
     exit when :system.last_record='TRUE';
end loop;
pl_id := get_parameter_list('para1');
if not id_null(pl_id) then
destroy_parameter_list(pl_id);
end if;
pl_id := create_parameter_list('para1');
add_parameter(pl_id,'Q_EMP',DATA_PARAMETER,'emp_rec');
add_parameter(pl_id,'paramform',text_parameter,'no');
run_product(REPORTS,'D:\ora\daily.RDF',synchronous,runtime,filesystem,pl_id,NULL);
end;
---------and this is my reprot query----------
select Empno,Ename,Job,Mgr,Hiredate,Sal,Comm,Deptno
from emp
where empno=:emp_rec
order by empno;
but it show error at run time
Rep-1340
plzz solve this problem to me
fahad

How can we call a report from a form.

how can we call a report from an existing form.

Have you searched the Forms help system? It shows you how to use RUN_REPORT_OBJECT

Calling Crystal Reports from Oracle Forms 10G

Hi everyone,
I am trying to call a crystal report from Oracle Forms 10G.
I have a button on my Form which when clicked calls a Crystal Report which the uaser then wants to save as a PDf file.
Can someone please send me the code to do this and also the exact steps that are to be followed.
Thanks
Fm.

Hi Andreas,
I am trying to call the crystal report from an Oracle Form using a URL. No batch file is being used here.
I am looking for a peice of code similar to run_product or run_report built in in Oracle which calls an Oracle report from an Oracle Form.
Also I dont want to display the report on a screen or a window in Oracle Forms. I would like it to run just as we run an Oracle Report from an Oracle Form.
Is that possible ? If yes please let me know the steps to do this.
Thanks
Faiz
Edited by: IQ on May 13, 2011 11:38 AM

Calling a report from the form shows SSO page

Similar Messages

Maybe you are looking for