Calling function module from solman

Hi Experts,
I created one function module in solution manager with remote enabled type, how to call that rfc into development sysytem.
Regards,
Thiru. R

hi,
may be this link
Re: TMS Error In Change Request Management
can prove useful to u ... in solving ur issue
regards,
prashanti

Similar Messages

HOW TO CALL FUNCTION MODULE FROM ABAP4 EDITOR

HI !
friends
I want to call function module from abap 4 editor.
is there any shortcut key from edit menu through which if give a function module name then it calls the function automatically?
points will be awarded.
Cheers
troy

command will be like this
 call function 'YW2_GET_MNW_PERIOD'
 exporting
 w_budat = v_datum
 importing
 w_period = i_date-period
 w_period_desc = i_date-p_desc.
Regards
prabhu

Calling function modules from a BSP page

Hi all
How do we call function modules from a BSP page.
regards,
Paul

Ok, You want to construct the URL pointing to a BW report and want to execute the same when a button is clicked right? if yes here is the answer.
for constructing the BW query URL
http://<bwserver>:<port>/sap/bw/BEx?sap-language=ENCMD=LDOC&infocube=<cube anme>&query=<query name>&var_name_1=<variable name1>&var_value_ext_1=<variable value 1>&var_name_2=<variable name2>&var_value_ext_2=<variable value 2>
(for more info on how to pass parameters to BW query URL refer to the BW web designer reference manual which can be found at http://services.sap.com/bw)
and for executing this from a button use onclientclick property of htmlb:button along with window.open
<htmlb:button id ="BWQ"
onClientClick = "javascript:window.open("<%= BW_URL %>" );"/>
Hope this is clear.
Regards
Raja

How to call function module from IP

Hi
I need to trigger the process chain from the input ready queries in Bex analyzer. I figured out that I need to call RSPC_API_CHAIN_START.
How do we go about in calling the above function module in IP.
Thanks in advance
I

Hi Matt
Thanks for your response, it was very productive at the right time as we saw our process chain running indefinetly. With selecting all chars to be changed, it ran just once with no errors.
what is TA ? I know rsplan- transaction code for the planning modeler.
Can you tell me how can we call function module in custom exit planning function.
Where should I embed the code
CALL FUNCTION 'RSPC_API_CHAIN_START'
               EXPORTING
                 I_CHAIN             = 'ZPC_CCATOPCA'.
               I_T_VARIABLES       =
               I_SYNCHRONOUS       =
               I_SIMULATE          =
               I_NOPLAN            =
             IMPORTING
               E_LOGID             =
             EXCEPTIONS
               FAILED              = 1
               OTHERS              = 2
thanks in advance

Can we call Function Module from Process Chain?

Hello experts,
I have a small question.
Can we call Function Module(SE37) from Process Chain?
If yes can you please provide some example link?
I m new to BI world.
regards

Hi,
Create one ABAP program and call the function module from that program. Check the link to know how to call a function module from an ABAP program.
http://help.sap.com/saphelp_wp/helpdata/en/d1/801edb454211d189710000e8322d00/content.htm
http://help.sap.com/saphelp_wp/helpdata/en/9f/db98ef35c111d1829f0000e829fbfe/content.htm
Then use process type "ABAP Program" in your process chain and add the program you have created. So then this program will be executed via process chain and this program will call the function module.
Indrashis

Calling Function Modules from BSP

Hi,
Can we call Remote Function Modules from a BSP page? If yes, can they be called from both Layout and Events and what's the proper way of calling them?
Any help will be great.

HI Aurang
Calling RFC is similar to calling any other Function Module..Only thing is you need to provide the DESTINATION name of RFC Destination..
And you can call it from Event like OnInputprocessing...
inside your BSP Page..
For Example
      CALL FUNCTION 'ZFI_FUNC_IM_DISPLAY_ASSE_CA_AS' DESTINATION 'Provide the RFC Destination here'
        EXPORTING
          I_PRCAT    = 'CA'
          I_DOCNO    = VAR_DOCNO
        IMPORTING
          E_ASSE_HDR = WA_HDR
          E_TEXT     = VAR_STATUS
        TABLES
          T_ASSE_LIT = T_T900.
If you are calling from same server..Write destination as NONE
Cheers:)
Mithlesh

Call function module from ITS template

Hi all,
Does anybody know if it is possible to call an ABAP function module (or embed any ABAP command) in an ITS template (HTML B)? If so, can someone post some sample codes?
Thanks!
Jay

hi,
it is not possible to run ABAP code from a ITS template.
Best regards,
Klaus

Call function module from BSP page

Hi Experts,
I am new to ABAP and BSP as well.
I am creating an BSP page through which I want to call an function module in R/3 which will fetch a file from the application server and place into an internal table.
I have identified the function module.
My questions are:
Since I am going to have an web interface where on a button click the file should be uploaded to the intrernal table.So how do I call the function module.
Can I use JSP and ABAP together in an BSP page.
Thanks
Ankit

Hello Ankit,
Please check the following link:
http://help.sap.com/saphelp_47x200/helpdata/en/bd/ac1e3a0088e042e10000000a11402f/frameset.htm
I think it will answer all your queries.
Regards,
Siddhesh

Call function module from BSP0 (Parameter group)

Hello All,
I am trying to call a FM by changing the parameter group of a planning profile (BSP0) as shown:
CALL FUNCTION Z_BW_CLEAR_VAR.
The name of the function module is already entered in table RSPLF_FDIR.
In the above FM there is DB deletion statement, which is not getting process.
When I kept break point at FM Z_BW_CLEAR_VAR and executed the planning function - it did not trigger the FM.
Please let me know how to call the FM.
Thanks & Regards,
Pratik

hi Alberto,
have a look at quesiton 5 in sap note 730870
it explains what you need to restart
from this note:
restart from visual admin:
" the RfcAdapter J2EE Service 'SAP XI Adapter: RFC' is restarted or a dependend J2EE Service is restarted ('SAP XI AF CPA Cache', 'SAP XI AF Messaging')."
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

How to Call Function Module from XI Mapping

Hi All,
I would like to call a function module that resides in ECC through XI mapping.
Can any one please through some light on how to proceed ?
Regards

Hello Shabarish,
Thanks for the reply, Actually i would like to do date validation using ISHMED_CHECK_DATE_TIME FM inside Mapping.
I would like to do this way, please let me know how good is this
1) Expose the FM as a RFC enabled one
2) Use the following UDF code inside Mapping
3) do i need to import the RFC enabled FM into our XI??
4) Do i required to create any Communication channel for this?
function RFC_LOOKUP_API
Imports java.io.;com.sap.aii.mapping.lookup.;
String content = "";
MappingTrace importanttrace;
importanttrace = container.getTrace();
// filling the string with our RFC-XML (with values)
String m = "<?xml version=\"1.0\" encoding=\"UTF-8\"?><ns0:Z_UDF_CREATE_ZTOR_REC xmlns:ns0=\"urn:sap-com:document:sap:rfc:functions\">";
m = m + "<I_MESSAGEID>" + MsgID + "</I_MESSAGEID>";
m = m + "<I_EBELN>" + PONum + "</I_EBELN>";
m = m + "<I_ERDAT>" + MsgDate + "</I_ERDAT>";
m = m + "<I_UZEIT>" + MsgTime + "</I_UZEIT>";
m = m + "</ns0:Z_UDF_CREATE_ZTOR_REC>";
RfcAccessor accessor = null;
ByteArrayOutputStream out = null;
try
// 1. Determine a channel (Business system, Communication channel)
Channel channel = LookupService.getChannel("XI","GeneratedReceiverChannel_RFC");
// 2. Get a RFC accessor for a channel.
accessor = LookupService.getRfcAccessor(channel);
// 3. Create a xml input stream representing the function module request message.
InputStream inputStream = new ByteArrayInputStream(m.getBytes());
// 4. Create xml payload
XmlPayload payload = LookupService.getXmlPayload(inputStream);
// 5. Execute Record Create.
Payload result = accessor.call(payload);
InputStream in = result.getContent();
out = new ByteArrayOutputStream(1024);
byte[] buffer = new byte[1024];
for (int read = in.read(buffer); read > 0; read = in.read(buffer)) {
out.write(buffer, 0, read);
content = out.toString();
catch(LookupException e)
importanttrace.addWarning("Error while writing " + e.getMessage() );
catch(IOException e)
importanttrace.addWarning("Error " + e.getMessage() );
finally
if (out!=null) {
try {
out.close();
} catch (IOException e) {
importanttrace.addWarning("Error while closing stream " + e.getMessage() );
// 7. close the accessor in order to free resources.
if (accessor!=null) {
try {
accessor.close();
} catch (LookupException e) {
importanttrace.addWarning("Error while closing accessor " + e.getMessage() );
//returning the result u2013 RFC-XML.response
return content;
Thanks & Regards
Vamsi

How to call Function Module from webdynpro application ,up on click url in

Hi Experts,
I need your help for the following scenario.
In my WebDynpro application , I am displaying the sales orders in a table.
one of the column in table i.e. sales order number is displayed with hyper link, up on click the sales order number column, i have to pass the po number to the a remotefunction with as one parameter and enjoy = 'x' as another parameter that should call me23n transaction and the transaction screen should be displayed in the webdynpro application with po details.
Thanks In Advance.
your help is rewarded.
Best Regards.
Rao.

Hi Rao,
 1.Create binding to view to Controller.
 2.Create table->Add column->Add table cell Editor(select LinkToAction UI Element in options).
 3. Bind the property text ->sales order number (Output/<model node>)
 4. Create an Event <salesOrder>
 // do null check
 // set your input parameters
 // input sales order number = current output sales order number
 // enjoy="x"
 // call controller's method() that executes RFC
 5. Bind this event LinkToAction property action-> <salesOrder>
To execute RFC, the code is available in sample tutorials.
Hope this helps
regards,
Siva

How to call a function module from a transformation

Hi,
Could somebody please let me know how I can call an abap function module from a transformation (abap xslt program). I know how to call the class methods from transformation, but how do i call a function module..?
Thanks,
Shashi.
Edited by: Shashi Kanth Kasam on Apr 8, 2010 12:45 PM

Ya. I can do that. But I don't want to use a class and a method to call that function module. Want to directly call function module from transformation. Is that possible..?
Thanks,
Shashi

Type error while calling function module with in FOX formula

Hi,
I am getting following error while calling function module from FOX Formula:
"Types of parameter DAY_IN () and variable J_CALDAY(D) are inconsistent"
Following is the code:
DATA    I_CALDAY       TYPE 0CALDAY.
DATA    N_CALDAY       TYPE 0CALDAY.
DATA    KYF              TYPE KEYFIGURE_NAME.
FOREACH   I_CALDAY, KYF.
   CALL FUNCTION SLS_MISC_GET_LAST_DAY_OF_MONTH
      EXPORTING
         DAY_IN = I_CALDAY
      IMPORTING
         LAST_DAY_OF_MONTH = N_CALDAY.
    {KYF, N_CALDAY} = {KYF, L_CALDAY}.
ENDFOR.
Import parameter DAY_IN is of type sy-datum (that inturn is data element SYDATUM of data type DATS - same as 0CALDAY). Not sure why error is being thrown. Any idea? Thanks.
Edited by: SAP_BOY on Dec 4, 2009 5:26 PM

Hi,
I think It will not identify ,though you have (data element SYDATUM of data type DATS - same as 0CALDAY).Check it out by assigning it through a variable of type D.
Data I_CALDAY TYPE D.
Hope it may work out.
Regards,
Indu

CNTL_ERROR while calling a function module from Java webdynpro

I am calling a RFC function module from javawebdynpro app
which inturn calls a function module performing BDC on CAPP transaction. When I run this from SE37 of the same system or a different system everything works fine. But when called from Java webdynpro app, it raises a CNTL_ERROR exception and creates a short dump.
Any help on this is highly appreciated

Good catch, BI Learner. This was exactly it: when assigning the values from SOURCEFIELDS directly to the import/export parameters, you have to make sure that the types are EXACTLY the same, otherwise it will not work (the routine stops with an error when calling the FM, but there is no dump).
Therefore, to solve my problem, I created the declarations precisely as expected by the FM and assigned the values to these fields:
DATA:
      SOURCEVAL TYPE /BIC/OIINVQTY,
      SOURCEUOM TYPE /BIC/OIUSUOM,
      USITM TYPE /BIC/OIUSITM,
      TARGETUOM TYPE /BIC/OIUSUOM,
      CONVERTED_COST TYPE /BIC/OIINVQTY.
DATA PRODUCTION_UOM TYPE /BIC/OIUSUOM.
" get the Production UOM
    SELECT SINGLE I~/BIC/USPRDUOM
      FROM /BIC/PUSITM AS I
      INTO PRODUCTION_UOM
      WHERE I~/BIC/USITM = SOURCE_FIELDS-/BIC/USITM AND I~OBJVERS = 'A'.
    IF ( SY-SUBRC = 4 ). " no records found
      "RAISE PARTNO_NOT_FOUND.
      RAISE EXCEPTION TYPE CX_RSROUT_SKIP_RECORD.
    ENDIF.
" load the parameters
    SOURCEVAL = SOURCE_FIELDS-/BIC/USFRZMFC.
    SOURCEUOM = SOURCE_FIELDS-BASE_UOM.
    USITM = SOURCE_FIELDS-/BIC/USITM.
" then you can call the FM
    CALL FUNCTION 'Z_CA_CONVERT_US_COST'
      EXPORTING
        PSOURCEVAL                = SOURCEVAL
        PSOURCEUOM                = SOURCEUOM
        PUSITM                    = USITM
        PTARGETUOM                = PRODUCTION_UOM
      IMPORTING
        PTARGETVAL                = CONVERTED_COST
      EXCEPTIONS
        CONVERSION_NOT_MAINTAINED = 1
        PARTNO_NOT_FOUND          = 2
        OTHERS                    = 3.
" ... [do the rest]
Thanks for your help,
Dennis

How to call a function module from the Web Template?

Hi all,
how can I call a function module from a BI 7.x web template and then show the result of the FM on the web template?
Many thanks for your hints.
Regards, Nils

Hi!
I am too working on a similar issue.
Probably this helps:
Re: Calling a function module from a Web Template
Regards,
Sri

Calling function module from solman

Similar Messages

Maybe you are looking for