Calling Report From Oracle Forms
Hi
I am calling this one report from oracle forms, I am using global temporary table to run that report. I am first inserting data into the temporary table through oracle form and then i am calling report in that form to view the data in that temporary table. The problem is, we can not view the data of an other session if we are using temporary table. When i call report from that form a new session get created due to which i can not see the data. Is there any method of calling report from oracle form that a same session is used to run the report?
Thanks.
As you mention Forms and Reports do not share the database session. I had the same problem and resolved it using record groups and DATA_PARAMETER to transfer data from Forms to Reports. You could also read the Note 110495.1 on Metalink to find useful information regarding this issue.
Adi
Similar Messages
-
Calling Report from Oracle form 11g
I am new to Forms 11g, trying to call report from Oracle forms 11g .
I want to call report from oracle forms, but its giving error.
Below is the code
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
BEGIN
repid := FIND_REPORT_OBJECT('empreport'); -- report node in forms builder
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_EXECUTION_MODE, BATCH);
set_report_object_property ( repid, report_filename, 'empreport.rdf' ); -- report name
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,cache);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,'RptSvr'); -- report server name
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
if
rep_status = 'FINISHED'
then
WEB.SHOW_DOCUMENT('http://inorasrv-pc:7001/reports/dtd/rwservlet/getjobid='||v_rep||'?server='||'RptSvr','_blank');
else
message ( 'error while running reports-object ' || error_text );
message ( ' ' );
clear_message;
end if;
end;
Above code giving following error :
Unable to connect to report server RptSvr
I think my report servername is wrong
Where to find report server name in 11g.
I am Using weblogic server, so can i give weblogic server name
Thanks in advance.
Edited by: parapr on Aug 17, 2012 1:52 AM
Edited by: parapr on Aug 17, 2012 3:21 AMHi,
You have to have the report server
a. Installed and configured
b. Running.
See
http://docs.oracle.com/cd/E21764_01/bi.1111/b32121/pbr_strt001.htm
http://docs.oracle.com/cd/E17904_01/bi.1111/b32121/pbr_verify004.htm
http://docs.oracle.com/cd/E17904_01/bi.1111/b32121/pbr_conf003.htm#i1007341
If you are using rwservlet then you will find the name from the Configuration file referred to in the last link.
Cheers, -
Calling reports from oracle forms 9i
Hi
I succeded to call reports from oracle forms but for I have a problem for only one report so I can't call it. this a part of the code I'm using :
declare
pl_id2 ParamList;
pl_name2 VARCHAR2(30) := 'liste2';
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
begin
pl_id2 := get_parameter_list(pl_name2);
if (Id_Null(pl_id2) )THEN
pl_id2 := Create_Parameter_List(pl_name2);
IF NOT Id_Null(pl_id2) THEN
add_parameter(pl_id2,'mois',TEXT_PARAMETER,:mois);
END IF;
end if;
IF NOT Id_Null(pl_id2) THEN
if(:mois is not null) then
v_rep := RUN_REPORT_OBJECT('My_report',pl_id2);
message(v_rep);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED') LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
WEB.SHOW_DOCUMENT('/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver','_blank');
ELSE
message('Error when running report');
END IF;
end;
the problem I've remarqued is that the function message(v_rep) is always returning the value :'repserver_0'.
so when I execute the previous code I'm getting the 2 messages : 'repserver_0' and 'Error when running report'.
Rq: the report my_report is running very well in report builder.
does someone see where is the problem so can help me??
thanx.Hi,
This usually happens when the report fails on the report server. To obtain details on why a particular report has failed, use the showjobs page :
http://server.domain:PORT/reports/rwservlet/showjobs?server=repserver
and check the detailed error occured.
This is logged as Bug:3017948. It is marked to be fixed in version 9.0.4 (Reports 10g) and also has one-off patches for version 9.0.2.3 on Windows platforms. If you need further assistance about patches, please raise a Service Request (SR) with Support via Metalink (http://metalink.oracle.com).
Regards,
-Bulent -
Problem displaying a report from within Oracle 10g forms.
After a lot of work, we are able to access and actually display a report directly from Internet explorer and view the report from the report server as well.
The successful url was:
http://york.vrc.virginia.gov:7778/reports/rwservlet
?report=/u01/app/oracle/produ ct/vrcmidtier/reports/vrc/pmw41051.rdf
&userid=vrcpr/vrcpr@vrctest&destype=cache&desformat=HTML
The form displays correctly back to the screen
When executing from within the form, however, the report runs but does not display back to the screen.
Forms Steps so far:
created a report object called pmw41050
static parameters are:
file name: /u01/app/oracle/product/vrcmidtier/reports/vrc/pmw41051.rdfination format
execution mode: batch
communication mode: synchronous
destination name; null
destination format: HTML
reportserver:: vrc_york_midtier
Built a when button pressed trigger as follows:
declare
l_report_file varchar2(200);
l_report_id REPORT_OBJECT;
l_report_status varchar2(200);
begin
-- capture the report
l_report_file := 'pmw41051';
l_report_id := find_report_object(l_report_file);
-- set the parameters for this output
set_report_object_property(l_report_id, REPORT_EXECUTION_MODE, BATCH);
set_report_object_property(l_report_id, REPORT_COMM_MODE, SYNCHRONOUS);
set_report_object_property(l_report_id, REPORT_DESTYPE, CACHE);
set_report_object_property(l_report_id, REPORT_DESFORMAT, 'PDF');
set_report_object_property(l_report_id, REPORT_SERVER, 'rep_york_vrcmidtier');
set_report_object_property(l_report_id, REPORT_OTHER, 'PARAMFORM=NO');
set_report_object_property(l_report_id, REPORT_DESNAME, 'DESNAME');
-- and run the report
l_report_status := run_report_object(l_report_id);
-- monitor progress
while l_report_status in ('RUNNING', 'OPENING_REPORT', 'ENQUEUED') loop
l_report_status := report_object_status(l_report_status);
end loop;
message('back from the report'); -- test message for return
end;
The report executes without error (as indicated by the message on the last line) but does NOT display back to the screen
checking the rwservlet/showjobs verifies the report completed and the reportcan be displayed from there.
So, bottom line: how to make a 10g form call report and display it on the screen?Thanks MIke for your feedback...
Will this surfice?
Procedure Test_Report Is
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(50);
BEGIN
repid := find_report_object('report5');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,BATCH);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,CACHE);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'html');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,'repserver90');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'paramform=no pdeptno='||:dept.deptno);
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
/*Display report in the browser*/
WEB.SHOW_DOCUMENT('http://<YourServerName:8888/reports/rwservlet/getjobid'||
substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver90','_blank');
ELSE
message('Error when running report');
END IF;
END; -
Invalid ID calling report from oracle forms 10 G
Hi, I have a problem during calling a report object 10g from a FORM, the source code is below the message, an the error message is can't not find PLAN_FUZZY (my report module name)...... WHY ???
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
Rep_status VARCHAR2(20);
BEGIN
repid := FIND_REPORT_OBJECT('PLAN_FUZZY');
V_rep := RUN_REPORT_OBJECT(repid);
END;hey,
May i know have u attached the report to your form???
i think the best way is using RUN_OBJECT method
Run_Product(REPORTS, 'report_path', SYNCHRONOUS, RUNTIME,
FILESYSTEM, NULL, NULL);
if your report is at reportxx folder then you can just write report file name.
Hope it will help you. -
Calling a report from oracle form 10g
how to call a report from oracle form 10g
Please see the link:
http://www.oracle.com/technology/products/forms/pdf/10g/frm10gsrw10g.pdf -
How to Call a jasper report from Oracle Forms 6i.
Hi
Can anybody tel me how to Call a jasper report from ORacle Forms 6i.
Thanks & Regards
BangoForms 6i client/server? Use the HOST command to call the report. Since a Jasper report is just a call to a url, it will be something like:
v_url := '<your url to the report>';
host ('cmd /c start '||v_url);If it's web Forms 6i it even easier. Just use web.show_document(<url>). -
URGENT!!! calling crystal reports from oracle forms 10g
Is it possible to call crystal reports from oracle forms 10g?
Can someone help to answer how, if there is a solusion, to call crystal reports from oracle forms 10g.
Please provide codes with details showing step by step.
Thankshi
try something like this.
DECLARE
charWinHandle VARCHAR2(50);
numWinHandle NUMBER;
BEGIN Set_Application_Property(Cursor_Style,'BUSY');
charWinHandle := Get_Item_Property('Control.Rep',Window_Handle);
numWinHandle := To_Number(charWinHandle);
:Item('Control.CrystalReport1').OCX.Crystal.Crysta lReport.WindowParentHandle
:= numWinHandle;
:Item('Control.CrystalReport1').OCX.Crystal.Crysta lReport.WindowState := 2;
:Item('CONTROL.CRYSTALREPORT1').OCX.Crystal.Crysta lReport.Connect
:= 'DSN=;UID=' || Get_Application_Property(UserName) ||
';pwd=' || Get_Application_Property(password) || ';dsq=;';
Crystal_CrystalCtrl.ReportFileName( :Item('Control.CrystalReport1').interface,
'C:\Sample_Rep.Rpt' );
Set_Window_Property( Forms_Mdi_Window, Window_State,Maximize );
Set_Window_Property( 'MAIN', Window_State, Maximize );
:reptitle := 'Report Preview Window';
numWinHandle := Crystal_CrystalCtrl.PrintReport( :Item('Control.CrystalReport1').interface );
Set_Application_Property(Cursor_Style,'DEFAULT');
END;NOTE: Change the report name and path according to your required file name and path in
the "Crystal_CrystalCtrl.ReportFileName" method call. Also, the connection string shown
assumes that you will use the current USER and PASSWORD for the Form.
- To make the above Form generic so that you can run any Crystal report from it, then create
a parameter for the report name and pass it to the Form using CALL_FORM from any other Form.
Then just replace the file name with the passed parameter.
-. Run the Form
If its correct/helpful please mark it thanks.
sarah
Edited by: S@R@h on Nov 27, 2009 6:33 AM -
Calling Crystal Reports from Oracle Forms 10G
Hi everyone,
I am trying to call a crystal report from Oracle Forms 10G.
I have a button on my Form which when clicked calls a Crystal Report which the uaser then wants to save as a PDf file.
Can someone please send me the code to do this and also the exact steps that are to be followed.
Thanks
Fm.Hi Andreas,
I am trying to call the crystal report from an Oracle Form using a URL. No batch file is being used here.
I am looking for a peice of code similar to run_product or run_report built in in Oracle which calls an Oracle report from an Oracle Form.
Also I dont want to display the report on a screen or a window in Oracle Forms. I would like it to run just as we run an Oracle Report from an Oracle Form.
Is that possible ? If yes please let me know the steps to do this.
Thanks
Faiz
Edited by: IQ on May 13, 2011 11:38 AM -
Call Oreacle report from Oracle form
Hi,
I need call a Oracle report from Oracle Form and found the the following procedure from this forum. I have 2 parameters 'start_date' and 'end_date' passing to called report. The following example just have onle parameter
'departmentno' passing. Is that mean I need to call add_parameter twice like the following?
add_parameter(plid, ''start_date' , TEXT_PARAMETER,:control.start_date);
add_parameter(plid, ''end_date' , TEXT_PARAMETER,:control.end_date);
In the following example:
add_parameter(plid, 'departmentno', TEXT_PARAMETER,to_char(:dept.deptno));
Thanks for clarification!!
Michael
PROCEDURE pass_parameter
IS
plid paramlist;
the_param varchar2(15) := 'tmpdata';
BEGIN
plid := get_parameter_list(the_param);
/* check if 'tmpdata' exists */
IF NOT id_null(plid) THEN
destroy_parameter_list(plid);
END IF;
/* if it does destroy it */
plid := create_parameter_list(the_param);
/* create it afresh */
add_parameter(plid, 'departmentno', TEXT_PARAMETER,to_char(:dept.deptno));
/* associate the param in the form with the param in the report */
add_Parameter(plid, 'PARAMFORM', TEXT_PARAMETER, 'NO');
/* to suppress the parameter form displaying */
run_product(REPORTS, /* product name */
'formrep.rdf', /* Oracle Reports module */
SYNCHRONOUS, /* communication mode */
RUNTIME, /* execution mode */
FILESYSTEM, /* location of the Reports module */
plid, /* handle to the parameter list */
null
END;this my code on when_button_press
declare
rec_grp recordgroup;
col1 groupcolumn;
col2 groupcolumn;
col3 groupcolumn;
col4 groupcolumn;
col5 groupcolumn;
col6 groupcolumn;
col7 groupcolumn;
col8 groupcolumn;
pl_id paramlist;
i number :=1;
begin
rec_grp := find_group('emp_rec');
if not id_null(rec_grp) then
delete_group(rec_grp);
end if;
rec_grp := create_group('emp_rec');
col1 := add_group_column('emp_rec','Empno',CHAR_COLUMN,8);
col2 := add_group_column('emp_rec','Ename',CHAR_COLUMN,30);
col3 := add_group_column('emp_rec','job',CHAR_COLUMN,15);
col4 := add_group_column('emp_rec','Mgr',CHAR_COLUMN,8);
col5 := add_group_column('emp_rec','Hiredate',DATE_COLUMN,10);
col6 := add_group_column('emp_rec','Sal',CHAR_COLUMN,10);
col7 := add_group_column('emp_rec','comm',CHAR_COLUMN,10);
col8 := add_group_column('emp_rec','Deptno',CHAR_COLUMN,4);
loop
go_block('emp_r');
go_record(i);
add_group_row(rec_grp,i);
set_group_char_cell('emp_rec.empno',i,:emp_r.empno);
set_group_char_cell('emp_rec.ename',i,:emp_r.ename);
set_group_char_cell('emp_rec.job',i,:emp_r.job);
set_group_char_cell('emp_rec.mgr',i,:emp_r.mgr);
set_group_date_cell('emp_rec.Hiredate',i,:emp_r.Hiredate);
set_group_char_cell('emp_rec.sal',i,:emp_r.sal);
set_group_char_cell('emp_rec.comm',i,:emp_r.comm);
set_group_char_cell('emp_rec.deptno',i,:emp_r.deptno);
i := i + 1;
exit when :system.last_record='TRUE';
end loop;
pl_id := get_parameter_list('para1');
if not id_null(pl_id) then
destroy_parameter_list(pl_id);
end if;
pl_id := create_parameter_list('para1');
add_parameter(pl_id,'Q_EMP',DATA_PARAMETER,'emp_rec');
add_parameter(pl_id,'paramform',text_parameter,'no');
run_product(REPORTS,'D:\ora\daily.RDF',synchronous,runtime,filesystem,pl_id,NULL);
end;
---------and this is my reprot query----------
select Empno,Ename,Job,Mgr,Hiredate,Sal,Comm,Deptno
from emp
where empno=:emp_rec
order by empno;
but it show error at run time
Rep-1340
plzz solve this problem to me
fahad -
Is it possible to call a Crystal Report from Oracle Forms.
Hi Everybody,
I got a Dout about Crystal Reports. Is it possible to call Crystal Reports from Oracle Forms.Hello,
That depends are you running Forms via the WEB or client/server. I will assume you are running client/server since you are running crystal reports. The answer is yes. All you will have to do is use the HOST command or the win_api_shell to run the report. Look in the Forms manual for information on the commands and what else you may need.
John -
How to print BIP reports from Oracle Forms?
Hi all,
I have a question in regards to printing BIP reports from Oracle Forms... We are aiming for a server installation of BIP with integration to Oracle Forms using SSO to handle security. We use Forms built-in web.show_document to render and view the report in PDF/Excel etc... We would like to by pass the viewing and print some of these reports directly to the printer.
Any idea/suggestions how we can go about this?
Thanks in advance for your time.
YahyaYahya,
via HTTP it's not possible to send a report directly to the printer. You had to go via the Scheduler, which is able to do that. With the WebService API you can call a report with the Scheduler and Execute Immediate.
Regards
Rainer -
How to invoke crystal reports from Oracle forms 11g R2 along with passing p
How to invoke crystal reports from Oracle forms 11g R2 along with passing parameter to it.
how to pass parameters to crystal report, please help.how to pass parameters to crystal report, please help.This would entirely depend on crystal reports and you might find informations on crystal reports related communities more likely...I for one have seen crystal reports the last time about 12 years ago. And even back then I simply acknowledged it's existence instead of working with it.
Maybe crystal reports can be invoked via a URL call which would make it simple as you'd need simply build an URL and show the report using web.show_document. But that's pure speculation. Also you might not be the first with this requirement, so the solution to your problem might be right under your nose and just a little google search away ;)
cheers -
How to configure and call Jasperreport from Oracle Forms 10gr2
Dear All
Please help me in configuring Jasperreport with Oracle Forms 10gr2 or AS.
And also tell me how to call a report from Oracle Forms.
ThanksI have a pro*c precompiled program on unix server (unix environment) and I want to execute or running it from oracle forms, release 4.5 on MS Windows.
how do i execute or running it from oracle forms, release 4.5 ? please tell me what the command (syntaxs) is and all about it ?you can mail me at [email protected]
thank's -
How to call Reports in oracle forms 10g
Dear All,
How to call Reports in oracle forms 10g.
I am using Oracle Forms 10g Reports 10g and Database 10 and and Operating system Windows XP.
Please give me the Solution.
Thanks and Regards,
FaziludeenHi Omkar,
Please check the following code.
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
plid ParamList;
BEGIN
plid := Get_parameter_List('tmp');
IF NOT Id_Null(plid) THEN
Destroy_parameter_List( plid );
END IF;
plid := Create_parameter_List('tmp');
add_parameter(plid,'p_parameter',text_parameter,to_char(:POLICY.POLICY_NO));
Add_parameter(plid, 'PARAMFORM', TEXT_parameter, 'NO');
repid := FIND_REPORT_OBJECT('POL_REP');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,cache);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER, 'paramform=no');
v_rep := RUN_REPORT_OBJECT(repid,plid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
WEB.SHOW_DOCUMENT('http://'||'LENOVO-428E9E41'||'8889'||'/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?
'||'server=prod_report_server&P_parameter='||:POLICY.POLICY_NO||
'¶mform=no');
END;
I am used to Start the Report sever 'Rwserver Server=prod_Report_Server Start'
OracleAS Report Services
Version :- 10.1.2.0.2
Name :- prod_report_server
Status :- Server is Shutting down
Jobs in Queue 0
Active Engines 0
I got the Following Error when I trying to run the Report
FRM-41211: Integration error:SSL failure running another product
Thanks and Regards,
Faziludeen
Maybe you are looking for
-
Shade background before printing a form
Hi, I have a single page form which need to be printed twice, the first copy with a white background ( standard ) the second copy needs to have the page shaded with a yellow Background. Reason to save having to put a white paper and yellow paper into
-
Firefox won't open when I click on it.
I click on both the icon in the dock and in the apps folder. When I click on the icon in the dock it bounces a couple of times and then nothing, it doesn't open and no white dot appears like they do on open apps in the dock. I am running the latest M
-
Footer content is blank from 2nd page onwards
I have two master pages: First and Next First page has a restriction to occur only once. It has a Footer. The same Footer is repeated on the next page. Both are Flowed. I have a code as below in the initialization event of the First: Footer as well a
-
IDoc acknowledgement again :)
Hi Expers i am realy strugling with IDOC acknowledgement!! i am following the Howtodo doc https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/903a0abc-e56e-2910-51a8-9dc616df56eb.. According to this document page no 3(scenario 2. Exte
-
XEROX PHASER 5500 drivers kill all print services
Just got a XEROX PHASER 5500 on our network, most machines deal with it fine, but after installing drivers on a Dual 2.3 ghz G5 running OSX 10.4.8 it kills all print services. Trying to print or pdf from any application gives me a dialogue saying tha