Calling ringtones from the application

Hi guys.
I am searching about to getting ring tones of iPhone for application. In other words, user can choose ringtone from iPhone Ringtone list. In order to do that, what do I need to use what class ?
Do you have an example related this issue ?
Please share the knowledge guys.
Thanks in advance.

As far as I know, the only way to do this is through the settings app built-in to the iPhone...
I don't know that there is programmatic access to any of those settings.
We're still waiting for Apple to give us access to the bluetooth on/off setting...
That's about all the knowledge I have to share.... sorry...

Similar Messages

Call Webgui from WD application with only one log on

Hi
In my first application using WD ABAP, requirement is to call WEBGUI from the application.
Calling WEBGUI is working fine but while calling WEBGUI the system asks for another log-on which is not required.
When the application first executes it asks for logon again while calling WEBGUI the system asks for another logon,
please let me know how can we avoid second logon?
Note - I am using RFC host name while creating URL for WEBGUI.
Thanks, in advance

Hello Trupti,
Are you using fully qualified host names?
Edgar

Calling from the application Slow vs. Running through SQL developer Fast

Alright, we write many applications that make use of calling stored procedures in packages to return data. This is the only time i have ever encountered this issue and have not been able to pinpoint the cause.
This application is very data-centric and is filled with calls to stored procedures and I would say about 80% run fine as in the time required to run is about the same as in SQL Developer maybe just a little slower due to the amount of data that may be returned to the application. The other 20% run horribly slow from the application and run lighting fast in SQL Developer and i cannot figure out why.
I have traced the code right up to the .Fill on the Oracle.DataAccess.Client.OracleDataAdapter and that is where it just holds either for a long period of time or just forever, some of these i haved waited hours for and they have not finished running.
For Example: I created a new page in the project and it makes a request through the use of ajax, when the request file is reached it performs two stored procedures from the same package (the only two procedures in the package). Both procedures take in three varchar2's and have an in out cursor, the cursor is returned into a datatable in the VB. The first query runs in a couple seconds returns the correct data etc. The second query, which takes .2 seconds on average to run from SQL Developer, just runs and runs and i have never actually even waited for it to finish because it takes so long. The specific example i am trying only returns 1 row with 7 columns, so there is not a large amount of data being passed back.
I have seen this sort of thing happen on occasions, but everytime it was usually because the package was not compiled and was waiting on a view to finish before compilation and after killing the view it was fine. But this issue seems to happen randomnly with certain procedures and not others all in the same package.
This issue happens on the same procedures everytime which would lead me to believe it is the procedure, but running them in SQL Developer shows me this is incorrect because they run exceptionally fast in some cases. I even went so far as to restart the entire database just in case there was some sort of lock causing this issue but this did not fix the issue.
I have verified parameters, cursors, debugged the procedures, stepped every line of code, tried deleting and readding the oracle.dataAccess reference. I can't seem to figure this one out.
It is causing alot of wasted time because i am forced to wait a horribly long time for these queries in order to test. If anyone has any clues, hints, or ideas as to what this could be please let me know! If the same issue exists when the application is moved into production it will be unnacceptable and the application utterly unusable.
Thanks in Advance for any help!
-Jarrod

Hi,
This is consistently reproducible with the problem procedure/operations? Total WAG here, but I've seen cases where having support for distributed transactions enabled causes the database to disable certain optimizations. Try setting Enlist=false in your connection string.
Otherwise, I'd recommend enabling 10046 database trace and client side sqlnet trace to capture the problem behavior for further investigation. Oracle support can certainly give you a hand with that if needed.
Hope it helps,
Greg

Call ITS from BSP Application

i have created a ITS screen which in turn calls a Abap report
I want to call this ITS screen from a BSP application .
Could you please provide some sample code which is used to call ITS from BSP application..
Useful answers will be rewarded
Thanks

Since it is related to both ITS and BSP i thought i can post it in both. and also i didnt get answers for the queries..... for a long time. Anyhow i will take your suggestion for my future query.
i hv done using iframe to call my ITS application.
I can able to call the Bsp application whichin turn calls its screen abap program.
while executing , the selecting the directory from the file browse pop up doesnt work for downloading the file
becos the client , they will not change the settings related to applet in the internet browser for security reasons.
I hav to make it some how to make it work in the portal which calls this BSP application..
at the moment i mapped this BSP application to the user role in the SUS Portal . but it appears in the SUS portal . but i m not able to click the application and also handsymbol is not seen while bringing the mouse to that area.
Could you please tell me , how to use Action_id for that particular application, Authorisation profile settings.
Kindly give your suggestions asap.

Calling RFCs from Webdypro application!!!!

Can anybody show me a suitable example for calling rfc from webdynpro application.

Hi steve,
Look at this tutorial..
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webdynpro/tutorial on accessing abap functions in web dynpro - 4.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webdynpro/tutorial on handling transactions with bapis in web dynpro - 5.htm
Follow the steps provided in those documents.
You can easily understand how to access ABAP functions from WebDynpro.
Let me know if you need more help on this.
Regards,
Karthick

Calling form from web application

i use the below url for calling form from web application.
http://host51.yan.com/forms/frmservlet?form=test&width=700
i would like to know about "frmservlet"
if it's a servlet file then
where its located in application server10g

The servlet is part of the forms-installation on the application-server, on the local OC4J this is located in $ORACLE_HOME/forms/j2ee/formsapp.ear
What exactly do you want to know about the servlet?

For those of you who have the "Perfect Timing" ringtone from the commercial

I posted this in the plain 'ol phone forum but haven't got a response yet. I hope I get one here.
For those of you who have the ringtone from the iPhone TV commercial -- do you remember what portion of the song (or can you check in iTunes) you used for the actual ringtone? If you could tell me the counter (in seconds and minutes) that you started and ended your tone at, that would be great. I'm trying to get it exactly like the commerical but I don't think I have it just right. Thanks! By the way the song is called "Perfect Timing."

"I downloaded the free version of malwarebytes and ran it when my computer was in safe mode, which found 93 malware "issues" on my computer."
...and you're surprised that you had installation issues with iTunes? This makes me wonder whether others who report problems installing iTunes have computers that are equally infected! For reference, I just checked the logs from the last Malwarebytes scan (I run an automated scan twice a week) on my main iTunes system (on which, like the other iTunes instances I run, never seems to suffer from any installation issues) - zero issues

I bought a ringtone from the store but it doesn't appear on the ringtone list? What I'm doing wrong?

I bought a ringtone from the store but it doesn't appear on the ringtone list? What I'm doing wrong?
how can I set this ringtone as my default Tone?

I tried that already.. the thing is, i press "buy more tones" in the "incoming call tones" panel, and the ringtone i purchased appears as "downloaded", but it only appears on the iphones itunes, not in the tones panels.
I know it's a small thing but y payed for this...

File from the Application server

Hi gurus,
I am working on a scenario where I need to get a file from the application server and for this I need to ask user to enter the location and that too at the selection screen and then I need to read this location using open data set and read data set in my program , once I am done with this I need to do some other validations. so can you please help me out how to achieve this.
Thanks
Rajeev Gupta

Hi
Declare the selection screen with file as parameter so that the user enter the application server file..
the use the OPEND DATASET as mentioned in below code and process
Refer this:
http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3ca6358411d1829f0000e829fbfe/frameset.htm
ABAP code for uploading a TAB delimited file into an internal table. See code below for structures.
*& Report ZUPLOADTAB                                                  *                     &----
*& Example of Uploading tab delimited file                             *
REPORT zuploadtab                    .
PARAMETERS: p_infile LIKE rlgrap-filename
                        OBLIGATORY DEFAULT '/usr/sap/'..
DATA: ld_file LIKE rlgrap-filename.
*Internal tabe to store upload data
TYPES: BEGIN OF t_record,
    name1 like pa0002-VORNA,
    name2 like pa0002-name2,
    age   type i,
    END OF t_record.
DATA: it_record TYPE STANDARD TABLE OF t_record INITIAL SIZE 0,
      wa_record TYPE t_record.
*Text version of data table
TYPES: begin of t_uploadtxt,
name1(10) type c,
name2(15) type c,
age(5) type c,
end of t_uploadtxt.
DATA: wa_uploadtxt TYPE t_uploadtxt.
*String value to data in initially.
DATA: wa_string(255) type c.
constants: con_tab TYPE x VALUE '09'.
*If you have Unicode check active in program attributes then you will
*need to declare constants as follows:
*class cl_abap_char_utilities definition load.
*constants:
   con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB.
*START-OF-SELECTION
START-OF-SELECTION.
ld_file = p_infile.
OPEN DATASET ld_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
ELSE.
DO.
    CLEAR: wa_string, wa_uploadtxt.
    READ DATASET ld_file INTO wa_string.
    IF sy-subrc NE 0.
      EXIT.
    ELSE.
      SPLIT wa_string AT con_tab INTO wa_uploadtxt-name1
                                      wa_uploadtxt-name2
                                      wa_uploadtxt-age.
      MOVE-CORRESPONDING wa_uploadtxt TO wa_upload.
      APPEND wa_upload TO it_record.
    ENDIF.
ENDDO.
CLOSE DATASET ld_file.
ENDIF.
*END-OF-SELECTION
END-OF-SELECTION.
*!! Text data is now contained within the internal table IT_RECORD
Display report data for illustration purposes
loop at it_record into wa_record.
    write:/     sy-vline,
           (10) wa_record-name1, sy-vline,
           (10) wa_record-name2, sy-vline,
           (10) wa_record-age, sy-vline.
endloop.
Regards
Anji

Upload tab-delimited file from the application server to an internal table

Hello SAPients.
I'm using OPEN DATASET..., READ DATASET..., CLOSE DATASET to upload a file from the application server (SunOS). I'm working with SAP 4.6C. I'm trying to upload a tab-delimited file to an internal table but when I try load it the fields are not correctly separated, in fact, they are all misplaced and the table shows '#' where supposedly there was a tab.
I tried to SPLIT the line using as separator a variable with reference to CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB but for some reason that class doesn't exist in my system.
Do you know what I'm doing wrong? or Do you know a better method to upload a tab-delimited file into an internal table?
Thank you in advance for your help.

Try:
REPORT ztest MESSAGE-ID 00.
PARAMETER: p_file LIKE rlgrap-filename   OBLIGATORY.
DATA: BEGIN OF data_tab OCCURS 0,
      data(4096),
      END   OF data_tab.
DATA: BEGIN OF vendor_file_x OCCURS 0.
* LFA1 Data
DATA: mandt LIKE bgr00-mandt,
      lifnr LIKE blf00-lifnr,
      anred LIKE blfa1-anred,
      bahns LIKE blfa1-bahns,
      bbbnr LIKE blfa1-bbbnr,
      bbsnr LIKE blfa1-bbsnr,
      begru LIKE blfa1-begru,
      brsch LIKE blfa1-brsch,
      bubkz LIKE blfa1-bubkz,
      datlt LIKE blfa1-datlt,
      dtams LIKE blfa1-dtams,
      dtaws LIKE blfa1-dtaws,
      erdat LIKE lfa1-erdat,
      ernam LIKE lfa1-ernam,
      esrnr LIKE blfa1-esrnr,
      konzs LIKE blfa1-konzs,
      ktokk LIKE lfa1-ktokk,
      kunnr LIKE blfa1-kunnr,
      land1 LIKE blfa1-land1,
      lnrza LIKE blfa1-lnrza,
      loevm LIKE blfa1-loevm,
      name1 LIKE blfa1-name1,
      name2 LIKE blfa1-name2,
      name3 LIKE blfa1-name3,
      name4 LIKE blfa1-name4,
      ort01 LIKE blfa1-ort01,
      ort02 LIKE blfa1-ort02,
      pfach LIKE blfa1-pfach,
      pstl2 LIKE blfa1-pstl2,
      pstlz LIKE blfa1-pstlz,
      regio LIKE blfa1-regio,
      sortl LIKE blfa1-sortl,
      sperr LIKE blfa1-sperr,
      sperm LIKE blfa1-sperm,
      spras LIKE blfa1-spras,
      stcd1 LIKE blfa1-stcd1,
      stcd2 LIKE blfa1-stcd2,
      stkza LIKE blfa1-stkza,
      stkzu LIKE blfa1-stkzu,
      stras LIKE blfa1-stras,
      telbx LIKE blfa1-telbx,
      telf1 LIKE blfa1-telf1,
      telf2 LIKE blfa1-telf2,
      telfx LIKE blfa1-telfx,
      teltx LIKE blfa1-teltx,
      telx1 LIKE blfa1-telx1,
      xcpdk LIKE lfa1-xcpdk,
      xzemp LIKE blfa1-xzemp,
      vbund LIKE blfa1-vbund,
      fiskn LIKE blfa1-fiskn,
      stceg LIKE blfa1-stceg,
      stkzn LIKE blfa1-stkzn,
      sperq LIKE blfa1-sperq,
      adrnr LIKE lfa1-adrnr,
      mcod1 LIKE lfa1-mcod1,
      mcod2 LIKE lfa1-mcod2,
      mcod3 LIKE lfa1-mcod3,
      gbort LIKE blfa1-gbort,
      gbdat LIKE blfa1-gbdat,
      sexkz LIKE blfa1-sexkz,
      kraus LIKE blfa1-kraus,
      revdb LIKE blfa1-revdb,
      qssys LIKE blfa1-qssys,
      ktock LIKE blfa1-ktock,
      pfort LIKE blfa1-pfort,
      werks LIKE blfa1-werks,
      ltsna LIKE blfa1-ltsna,
      werkr LIKE blfa1-werkr,
      plkal LIKE lfa1-plkal,
      duefl LIKE lfa1-duefl,
      txjcd LIKE blfa1-txjcd,
      sperz LIKE lfa1-sperz,
      scacd LIKE blfa1-scacd,
      sfrgr LIKE blfa1-sfrgr,
      lzone LIKE blfa1-lzone,
      xlfza LIKE lfa1-xlfza,
      dlgrp LIKE blfa1-dlgrp,
      fityp LIKE blfa1-fityp,
      stcdt LIKE blfa1-stcdt,
      regss LIKE blfa1-regss,
      actss LIKE blfa1-actss,
      stcd3 LIKE blfa1-stcd3,
      stcd4 LIKE blfa1-stcd4,
      ipisp LIKE blfa1-ipisp,
      taxbs LIKE blfa1-taxbs,
      profs LIKE blfa1-profs,
      stgdl LIKE blfa1-stgdl,
      emnfr LIKE blfa1-emnfr,
      lfurl LIKE blfa1-lfurl,
      j_1kfrepre LIKE blfa1-j_1kfrepre,
      j_1kftbus   LIKE blfa1-j_1kftbus,
      j_1kftind   LIKE blfa1-j_1kftind,
      confs LIKE lfa1-confs,
      updat LIKE lfa1-updat,
      uptim LIKE lfa1-uptim,
      nodel LIKE blfa1-nodel.
DATA: END   OF vendor_file_x.
FIELD-SYMBOLS: <field>,
                <field_1>.
DATA: delim          TYPE x        VALUE '09'.
DATA: fld_chk(4096),
      last_char,
      quote_1     TYPE i,
      quote_2     TYPE i,
      fld_lth     TYPE i,
      columns     TYPE i,
      field_end   TYPE i,
      outp_rec    TYPE i,
      extras(3)   TYPE c        VALUE '.,"',
      mixed_no(14) TYPE c        VALUE '1234567890-.,"'.
OPEN DATASET p_file FOR INPUT.
DO.
READ DATASET p_file INTO data_tab-data.
IF sy-subrc = 0.
    APPEND data_tab.
ELSE.
    EXIT.
ENDIF.
ENDDO.
* count columns in output structure
DO.
ASSIGN COMPONENT sy-index OF STRUCTURE vendor_file_x TO <field>.
IF sy-subrc <> 0.
    EXIT.
ENDIF.
columns = sy-index.
ENDDO.
* Assign elements of input file to internal table
CLEAR vendor_file_x.
IF columns > 0.
LOOP AT data_tab.
    DO columns TIMES.
      ASSIGN space TO <field>.
      ASSIGN space TO <field_1>.
      ASSIGN COMPONENT sy-index OF STRUCTURE vendor_file_x TO <field>.
      SEARCH data_tab-data FOR delim.
      IF sy-fdpos > 0.
        field_end = sy-fdpos + 1.
        ASSIGN data_tab-data(sy-fdpos) TO <field_1>.
* Check that numeric fields don't contain any embedded " or ,
        IF <field_1> CO mixed_no AND
           <field_1> CA extras.
          TRANSLATE <field_1> USING '" , '.
          CONDENSE <field_1> NO-GAPS.
        ENDIF.
* If first and last characters are '"', remove both.
        fld_chk = <field_1>.
        IF NOT fld_chk IS INITIAL.
          fld_lth = strlen( fld_chk ) - 1.
          MOVE fld_chk+fld_lth(1) TO last_char.
          IF fld_chk(1) = '"' AND
             last_char = '"'.
            MOVE space TO fld_chk+fld_lth(1).
            SHIFT fld_chk.
            MOVE fld_chk TO <field_1>.
          ENDIF.       " for if fld_chk(1)=" & last_char="
        ENDIF.         " for if not fld_chk is initial
* Replace "" with "
        DO.
          IF fld_chk CS '""'.
            quote_1 = sy-fdpos.
            quote_2 = sy-fdpos + 1.
            MOVE fld_chk+quote_2 TO fld_chk+quote_1.
          ELSE.
            MOVE fld_chk TO <field_1>.
            EXIT.
          ENDIF.
        ENDDO.
        <field> = <field_1>.
      ELSE.
        field_end = 1.
      ENDIF.
      SHIFT data_tab-data LEFT BY field_end PLACES.
    ENDDO.
    APPEND vendor_file_x.
    CLEAR vendor_file_x.
ENDLOOP.
ENDIF.
CLEAR   data_tab.
REFRESH data_tab.
FREE    data_tab.
Rob

I cannot log onto the App Store, the page appears when I call it from the dock or the Apple menu. I can call the log-in box from the menu bar, but on signing in the spinning icon just keeps spinning,(not the beachball). Any suggestions? Using 10.6.7 and u

I cannot log onto the App Store, the page appears when I call it from the dock or the Apple menu and I can call the log-in box from the menu bar, but on signing in the spinning icon just keeps spinning,(not the beachball). Using 10.6.7 and up-to-date on all software. Any suggestions?

Could be a third party app preventing you from being able to login.
Mac App Store: Sign in sheet does not appear, or does not accept typed text
If it's not a third party issue, follow the instructions here.
Quit the MAS if it's open.
Open a Finder window. Select your Home folder in the Sidebar on the left then open the Library folder then the Caches folder.
Move the com.apple.appstore and the com.apple.storeagent files from the Caches folder to the Trash
From the same Library folder open the Preferences folder.
Move these files Preferences folder to the Trash: com.apple.appstore.plist and com.apple.storeagent.plist
Same Library folder open the Cookies folder. Move the com.apple.appstore.plist file from the Cookies folder to the Trash.
Relaunch the MAS.

I recently purchased FaceTime from the Application Store. After approx. ±10 meg, the application resets and starts downloading again. I have tried to download it at different times of the day but with the same results. I have been in contact with Apple su

I recently purchased FaceTime from the Application Store. After approx. ±10 meg, the application resets and starts downloading again. I have tried to download it at different times of the day but with the same results. I have been in contact with Apple support and have tried different options with the same result. I cannot download a new Version because in my Purchased List the applicaiton (FaceTime) is still there, and because I have halted it it tells me to resume. I can’t, because the same thing is going to happen. I have tried all the various troubleshooting tips supplied by my ISP and also Apple Support with no luck. I am currently working on a IMac OS 10.6.7. Has anybody got any ideas? Any suggestion would help. Thanks

Amol Soni wrote:
As I said, I tried everything what the manual says, but hard luck. I have taken an appointment for today, lets see what happens.
Also there is no activity on unit when I use the remote. The unit is stuck on the first page itself where we have to choose the language. The unit seems to be fine to me but the real problem is remote does'nt have activity. The IR is not responding while pressing any of the button.
Good luck with your appointment.
Not much consolation but even new products can have issues and might need a trip to a store to return/replace.
The reason i asked about the LED on the AppleTV is that occasionally it thinks it's paired with a specific remote and ignores others - the unpair keypress I described is quick and free.
AC

How do I Separate my resources from the application

Am am writing an application with several large resource files which I want to be able to transfer to my phone separatly from the application. This is so I can update the application without having to transfer the resource files.
How is this done?
How do I connect to a separate resource in my program. At the moment I use
InputStream is =getClass().getResourceAsStream("MyResourceName");
where "MyResourceName" is the path to a resource packaged up with the application.

You can't edit a video out of iTunes.
You would have to edit the video from the original film, either on your computer, or iPhone.

The Help Link from the Application Pages Does not Work for Peoplesoft Campus Solutions 9.0

Hi everyone.
I have a problem, I have been trying to set up the Help Link from the Application Pages for Peoplesoft Campus Solutions 9.0 according to the instructions given in the Document: http://docs.oracle.com/cd/E17566_01/epm91pbr0/eng/psbooks/EnablingtheHelpLinkfromApplicationPages.pdf , (referenced in the Doc ID 1289101.1, E-PB: How to Set Up the Context Sensitive Help with Hosted PeopleBooks using Universal Linking).
I follow the instructions of that document carefully:
I go to: PeopleTools -> Web Profile -> Web Profile Configuration
    2. Then I choose the Web Profile: "Development".
    3. Then Change the value for the Help URL field by entering the following URL format: http://www.oracle.com/pls/topic/lookup?id=%CONTEXT_ID%&ctx=hrcs90r5 , the ctx parameter selected is the one that correspond to the Campus Solutions (hrcs90r5) according to the Product Line Code Table (ULinkID) especified in the mentioned document.
    4. Stop the Web Domain and Clear cache.
    5. Start the Web Domain again.
After setting up the Web Profile Configuration I test the help links, thas is why I click in the Help link in any Peoplesoft CS 9.0 Application Page (modify a person), but the next error message appears: "We're sorry, the topic you requested was not found.".
I tried many combinations with the ctx parameters URL but it does not work yet.
I did the same test, but this time using the Help URL field with a HRMS ctx parameter by entering the following URL format: http://www.oracle.com/pls/topic/lookup?id=%CONTEXT_ID%&ctx=hcm92pbr5 , and It works fine !!!
According to the previous test you realize that It works with HRMS ctx parameter but not with Campus Solutions 9.0 ctx parameter, Does anybody know what else can I do ? Am I doing anything wrong or missing? or maybe the Oracle's ctx parameter for Campus Solutions URL It is broken simply.
Thanks for you help and feedback.

2799444 - The page you are testing with appears to be a Workforce Administration page. Is that correct?
The CS PeopleBooks would only work for CS pages, e.g.: try navigating to Main Menu > Campus Community > Personal Information > Add/Update a Person
Also, you can use multiple ctx parameters:
E.g.: http://www.oracle.com/pls/topic/lookup?id=%CONTEXT_ID%&ctx=hrcs90r5&ctx=hcm92pbr5&ctx=pt852pbh2
This way the help would work for the HR related pages like Workforce Administration, Campus Solutions pages like Campus Community and also PeopleTools pages like Web Profile Configuration. Hope this clarifies your question. Thanks!

User is thrown from the Application under Cluster stress test

Hi All,
i have ADF/ADF faces application running on WLS 10.3.5.0 Cluster Environment (with 2 nodes).
I'm running application using in memory Session replication.
The problem which i have is that under the stress test (about 10-20 users) sometimes user suddenly is presented with Login Screen (more rare with session expired message) ! This also can happens immediately after user login .
That happens randomly on different part of the System. In more of the cases user is thrown independently from other users but
sometimes all the users are thrown simultaniously.
When the System is tested with only one user this effect appears very rare.
What i have done is to enable Cluster and Replication debugging to see if there some errors within Http Session Replication. However there isn't any errors appeared. From the application part everything seems fine.
I suspect that the proxy could cause a problem (by forwarding the request to secondary instead of primary server). Currenltly i'm using HttpClusterSerlvet installed by default from WebLogic Configurator on dedicated Managed Server.
Can somebody give any advice with this ?
Thanks in advance,
Krasimir

Krashmir,
Did you find any solution for this problem. I am also facing the similar issue.
Thanks,
Ram

Calling ringtones from the application

Similar Messages

Maybe you are looking for