Camera, Browser & Maps Not Working

Hi,
It been since yesterday my Z10 camera, broser & maps not working.
Whenever I click the camera icon, it is not even opening.
Browser icon had changed, it turned to a triangle square & circle.
Can anyone help me out.
Thanks,
Chris

The update may not have loaded properly, you can reload this way:   http://btsc.webapps.blackberry.com/btsc/viewdocume​nt.do?externalId=KB34045&sliceId=2&docType=kc&noCo​...
Or do a Security Wipe (Reset to Factory Settings) this way: 
http://btsc.webapps.blackberry.com/btsc/viewdocume​nt.do?externalId=KB33591&sliceId=2&docType=kc&noCo​...
Please read both carefully !

Similar Messages

  • Can no longer access iPhoto from the iMovie camera browser..not working. Also the Inspector tool not working properly. Cannot change clip duration.

    How can I fix the INSPECTOR Tool?   Clip duration is not working properly, it is very erratic.  You type a number and a different one comes up on the clip.
    Suddenly the iPhoto Camera browser in iMovie is not working properly either.  Can not access my iPhotos to include them in iMovie project.

    Have you tried this?
    From the "HOME" screen, go to "SETTINGS > PRIVACY > PHOTOS" and see if iMovie is listed in the "PHOTOS" page. If it is, then tap the iMovie switch to "ON"
    Now your Videos & Photos should be accessible in the iMovie App.

  • HT3964 my built-in isight camera will still not work on my macbook pro after completing smc reset.  The green light comes on but no video.

    my built-in isight camera will still not work on my macbook pro after completing smc reset.  The green light comes on but no video. 
    Any Suggestions?

    Restart the computer.

  • Nokia 701 web browser is not working

    i have nokia 701. My phone web browser is not
    working. Net is working in other browsers like
    opera and uc browser. it's a big problem for me i
    can't watch online videos and i can't access to google or any other site.. I also delete the cache folder in C drive. But still browser is not working.plz help me to solve this
    problem...

    same here also. happened after i updated social. now cant browse or check for updates

  • My iPhone 5 rear camera was not working, now the rear camera is also not working. I have procured the phone in 2012 from San Fransico. USA Can anyone help me, please?

    My iPhone 5 rear camera was not working, now the rear camera is also not working. I have procured the phone in 2012 from San Fransico. USA Can anyone help me, please?

    No one here can help you. If your phone is no longer under warranty, a third-party repair shop will most likely be your best bet. You can't mail the phone to Apple, in the US, as Apple does not accept international shipments. You could mail it to a friend/relative, in the US, & they could take it to an Apple store for you. Some Apple stores repair iPhones. Otherwise, you're looking at an out of warranty replacement.
    Good luck.

  • On another PC I want to backup my bookmarks but my Firefox browser is not working how can I do the backup before I reinstall Firefox

    On another PC I want to backup my bookmarks but my Firefox browser is not working how can I do the backup before I reinstall Firefox.
    Firefox can't renew it's last tabs and now won't run and let me do a backup

    It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
    Delete the sessionstore.js file and possible sessionstore-##.js files with a number and sessionstore.bak in the Firefox Profile Folder.
    *Help > Troubleshooting Information > Profile Directory: Open Containing Folder
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
    See also:
    *http://kb.mozillazine.org/Session_Restore
    *http://kb.mozillazine.org/sessionstore.js
    *http://kb.mozillazine.org/Multiple_profile_files_created

  • My friends browser is not working on his computer how can i download firefox to put on his computer

    my friends browser is not working tech support told us to download a version of firefox onto disc and download it into his computer. How do i do that without affecting my own browser.

    You can download the setup file (Firefox Setup 3.6.13.exe) from http://www.mozilla.com/ - If using IE to access that page, choose Save rather than Run to save the setup file.
    Copy that file to a disc or USB flash drive and run it on your friends computer to install it.

  • My camera  icon is not working on my sms so i cant send picture with sms? what to do?

    My camera  icon is not working on my sms part?
    so i cant send picture with sms? what to do?

    Double tap Home button, delete Camera app in multitask-bar.
    Do a
    Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data
    By the way, picture go through as MMS not SMS, do you have a SMS/MMS plan with your carrier?
    Have you spoken with them?

  • Browser is not working properly

    default browser is not working properly .....
    closed on few second !!!!!!!
    what the solution?

    Hi and Welcome to the Community!
    Anytime random strange behavior or sluggishness shows up, the first thing to try is a proper reboot:
    Pre-BB10 Devices ONLY. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
    BB10 Devices. Hold the top button down until the counter reaches zero. Wait for the device to be fully shut down (e.g., nothing at all displayed on the screen, no LED lights, etc.). Hold the top button until the red LED is lit. Wait through the full boot-up process. If this fails, you can attempt the battery-pull method above, but it is normally NOT recommended unless nothing else works.
    See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I have CS5 and a d-600. I would like to use camera raw but not working. I downloaded CR 7.3 and still not working. Do I need to upgrade to CS6 ..or just throw it all out the window and get rid of my d-600 ?

    I have CS5 and a d-600. I would like to use camera raw but not working. I downloaded CR 7.3 and still not working. Do I need to upgrade to CS6 ..or just throw it all out the window and get rid of my d-600 ?

    it allows you to use your cr files, Adobe - Adobe Camera Raw and DNG Converter : For Windows
    Camera Raw: How to use Adobe DNG Converter - YouTube

  • Browser is not working, please help.

    I have had my Blackberry for a about a month and a half.  For the first few weeks, the browser worked fine and everything was great.  But now, the browser does not work.  My email, facebook, twitter, etc. all still work fine, but can not access anything through the browser.  Does anyone know why this might be?  I know I should take it to the company store, but I live in a Spanish speaking country and don't speak great Spanish.
    Thanks for any help!
    Solved!
    Go to Solution.

    Hi and Welcome to the Forums!!
    I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB):
    1) Register HRT
    Homescreen > Options > Advanced Options > Host Routing Table > (it does not matter which line is current) > Register Now
    2) Resend Service Books
    KB02830 Send the service books for the BlackBerry Internet Service
    3) Batt Pull Reboot
    Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    Hopefully that will get things going again for you! If not, then please provide exacty symptoms of what is going on..."not working" doesn't really give us much to go on. Is there an error message of some sort?
    Thanks!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Alternate Access Mapping not working for Zone : Intranet

    One of our client want to set Alternate Access Mappint (intranet) with url "intranet.theirDomain.com" with local IP address.
    is it possible?
    subsequest to my previous question (
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/3f39711e-301a-40e8-aa7a-855fa2c268b1/alternate-access-mapping-not-working?forum=sharepointadmin )
    I want to ask one more question
    Can we configure "intranet.theirDomain.com" with local IP address for any other zone?
    or
    If there is ".com" within the url then it can't be configured for InTRAnet?
    Thanks
    S H A J A N

    The names for the zones don't matter. You could use the 'extranet' zone for another intranet name if you wanted, the names are just to make it a bit more friendly for beginners.
    What you describe sounds routine, you create a web application with a name, then use an AAM to allow users to access it with a more friendly name. Frequently you end up creating
    http://intranet.domain.com and
    http://intranet as an AAM, or vice versa.
    You can use .com for an intranet site, you would need to add the site as an A Host record in your DNS server so that traffic is sent to your internal server rather than out into the wider world.

  • Value mapping not working properly

    Hi All,
    I am using value mapping twice in same mapping program. But only 1 field is coming with value and other is taking same value from source payload, can you please tell me what can be issue here?
    Value mapping 1 -
    Context - http://sap.com/xi/XI
    SenderParty- SenderSchema
    ReceiverParty- ReceiverSchema
    Value Mapping table in ID -
    Value mapping at field 2 -
    Context - http://sap.com/xi/XI
    SenderParty1- SenderSchema1
    ReceiverParty2- ReceiverSchema2
    Value Mapping table in ID -
    Source payload -
    <?xml version="1.0" encoding="UTF-8"?>
    <ns0:MT_VM_Send xmlns:ns0="http://xyz.com/Rashmi_CollectPatternDemo">
       <Record>
          <Emp_ID>123</Emp_ID>
          <Name>rash</Name>
          <Surname>sumit</Surname>
          <Gender>Male</Gender>
         <Grade>E2</Grade>
      </Record>
    </ns0:MT_VM_Send>
    Target Payload -
    <?xml version="1.0" encoding="UTF-8"?>
    <ns0:MT_VM_Receiver xmlns:ns0="http://xyz.com/Rashmi_CollectPatternDemo">
    <Record>
    <Emp_ID>123</Emp_ID>
    <Full_Name>rash sumit</Full_Name>
    <Designation>E2</Designation>
    <Gender>M</Gender>
    <Travel_Mode>Train</Travel_Mode>
    </Record>
    </ns0:MT_VM_Receiver>
    Here travel_mode is coming perfect, but designation is same as defined in source payload. Why here Value mapping not working???
    Thanks & regards,
    Rashmi Joshi

    Hi Rashmi,
    The problem would either be in cache update or your mapping. Please provide the sceenshot of mapping (after clicking the value mapping function).
    you can also choose the option to throw error in value mapping function, so it will throw error when value not found.
    regards,
    Harish

  • Camera Raw CS6 not working properly

    I have upagraded from Ps Cs5 to CS6.
    I open a file in CR, and modify the exposition. After that, I modify the clarity: immediatly, the exposition goes back as it was before the modification ...
    After the work on CR, I finish the file and go back to bridge: the image is not modified ! But if I dobble click on the same image in bridge, the file is opening in CR with the modifications: so this modifications are note visble on bridge ...
    Some body can help me ?
    I work with the last version of Br and Ps CS6.
    Thanks,
    Michel,   [email protected]

    Thanks a lot, Adriana, it is working ! You are right, it is the Nike plugins responsibility. Everything is OK now.
    Salutations and many thanks from Guadeloupe, French West Indies
    Michel GOGNY-GOUBERT
    Le 4 mars 2014 à 17:42, adriana ohlmeyer <[email protected]> a écrit :
    Re: Camera Raw CS6 not working properly
    created by adriana ohlmeyer in Adobe Camera Raw - View the full discussion
    If you have Nik plugins installed, please check reply # 8 on this thread:
    http://forums.adobe.com/message/6045415#6045415
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6179192#6179192
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6179192#6179192
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6179192#6179192. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Adobe Camera Raw at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • My Safari browser is not working well. Junk pages keep poping in and key pages for me appear intoxicated by alien pop ups preventing me navigate that page. Updated last Safari version and problem prevailed. Tried downloading Safari for Mac OS X Mavericks.

    My Safari browser is not working well. Junk pages keep popping up and key pages, for me, appear intoxicated by alien pop ups preventing me navigate that page.
    I updated to latest Safari version (7.0.4) but the problem persists.
    I tried downloading a new version of Safari for Mac OS X Mavericks but couldn't find it available.
    Thanks for your help.

    The pop ups are malware. It's not necessary to reinstall Safari.
    Help here ..
    The Safe Mac » Adware Removal Guide
    The Safe Mac » Genieo
    The Safe Mac » Mac Malware Guide
    Just so you are aware, on a Mac running Mavericks, the only way to reinstal Safari to to restore OS X using OS X Recovery

Maybe you are looking for

  • Populating CRM marketing attributes using the APD

    Hi Experts We are having problems with populating CRM marketing attributes using the APD. When we run our process we get the error message: CRMBW_ATTR_WRITE005: Error when processing function module CRMBW_UPDATE_BPMKT_5. Message no. RSAN_MDL024 As yo

  • Webcharts3D Question

    All, I have a question regarding WebCharts3D. I've created some gauge charts in PNG format. Each gauge displays "high level" data for a certain category. Now what I've been asked to do is to make the gauge "clickable" - i.e. make it a hyperlink to an

  • Reinstalling Xcode

    I have Xcode 3.2.3 currently installed on my Mac. Its somewhat buggy so I decided to update it to v. 3.2.5. But what is the correct procedure to remove v.3.2.3? Clearly moving its icon to the trash doesn't do it.

  • Ancient RHEL3 Running Oracle Rac 10G - memory utilization question

    As all good things must happen the crappy old systems that never get upgraded come back to bite you. I have a 4 node RAC cluster running Linux RHEL3. I know .. would love to upgrade it .. but that will take time. Looking for at survival at this point

  • Sharing files between Leopard and Panther

    I have two iMac's running Panther (10.3.9) that are networked wirelessly and living happy together. Today I wanted to add a new iMac that his running Leopard into the network that is also wireless. I have no problem accessing the internet using the w