Camera does not work correctly after op system update

UUpdated op system and now camera does not function. Reset pad and made no difference

There's more than one type of reset ...
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
No data is lost due to a reset.

Similar Messages

Satellite M645-S4050: built in camera does not work correctly

My built in camera does not work correctly.
It does not have any kind of effect on and it captures pictures and videos as if some kind of thermal camera was on.
Also some videos I load up on youtube look like this.
I have been researching for an answer but can't find it, please help me.

All you can do is to test it with latest webcam driver.
Remove preinstalled camera software and install latest version offered on Toshiba download page.
If the same happen again visit nearest Toshiba service and show them how it looks like. Maybe the cam must be exchanged.
In the past I have used several Toshiba laptops with built in cam but I have never saw something lke this.

Remote does not work correctly after update

Hello,
the subject explain it already:
After upgrading to 2.3 the apple remote does not work correctly anymore:
I need to push the buttons twice, and than atv is only reacting sometimes.
Any ideas?
BR
Frank

Same problem here. First, I thought it was the Apple remote's battery. I replaced that and the problem persisted. I then used my digital video camera to verify that the remote was actually transmitting infrared, it was. In frustration, I tapped the buttons rapidly while pointing at the Apple TV. The Apple TV responded. The next button press it failed to respond. I tapped rapidly again and it finally responded. After many many rapid presses, while pointing directly at the Apple TV, it finally began responding to all presses. Once I'd regained control (I thought) I unpaired and re-paired the remote. Everything continued to work. At that time I also saw that I could "learn" another remote. So, I set up my Samsung TV remote. Sweet. Until the Apple TV went into screensaver mode again and I had to go through the same rapid button press sequence... with either the Apple remote or my learned Samsung remote. Conclusion, since the Apple TV will become fully responsive after the rapid button press sequence, it is certainly a software related problem.

My wacom tablet does not work correctly after updating to mavericks.

My wacom doesn't work.

Jason, how did you switch back? My tablet does not work either. All I can do for the moment is work on my laptop which has the old system.
Thanks,
Teresa
I was almost certain that the new osx would be trouble as was Lion and after that Mountail Lion. So, instead of my usual hard drive clone, which I make with superduper, I made a second one just to be certain. After 10 minutes of Mavericks, I am happy back to snow leopard.
I really think that it is the most developed, glitch free operating system. If it wasn't for all these money thirsty companies stopping the support of the previous op. systems perhaps we could stop at Snow leopard. What more to ask. Even aesthetically osx 10.9 is much worse that snow leopard.
Anyway, long answer. sorry. It is a good habit to clone your HD once in a while.
p.s. my only reason for wanting to upgrade is because Lightroom stopped support but I am still doing my work with the previous versions. I guess people will allways think that if they have the newest, biggest, baddest version of a software will make them better in what they do..or in who they are, really.

Bluetooth w/ voice commands is not working correctly after 2.2 update and factory default.

I have been having numerous problems with my phone and now a problem with the Bluetooth. I have a Sony Xlopd Stereo in my car with built-in Bluetooth capability. I have been able to use the phone connected to the Sony flawlessly for several weeks. On an in coming call the Caller's name and the ringer would go through the speakers in my car. When I wanted to place a call from the car I would press the Bluetooth button on my stereo, this would launch the voice command program on the Droid X and output the voice commands responses through the stereo and then dial the phone number I was trying to call. Then I updated the phone to 2.2 and still maintained all the same Bluetooth capability. However, after having other problems with the phone after the update I decided to do a Factory Rest. After the rest it seemed to clear up some of my issues; except now when I re-paired the phone to my Sony stereo I have lost a lot of functionality. For example, now when a call comes it does not announce the caller or ring through the stereo. When I try to place a call through the stereo, the voice command program is no longer launched on the phone and it will not place a call. I have to initiate the call through the phone itself and then the Bluetooth automatically picks up the call. I have tried to wipe the paring from the phone and stereo and pair again with no luck. I have also checked the volume settings and most settings on the phone. This frustrating when trying to place a call. I would not be so bad if I never had the capability, but now knowing that it was possible at one time I want it to work again.
Does anyone know if this functionality was lost after the update and my phone was still "stuck" between 2.1 and 2.2?
Or is there another problem with my device that can't be resolved?
I am open to any advice, since Verizon will not replace my phone that has signal and reception issues dropped calls, reboots randomly among other things and now this issue even though I pay $8 a month for warranty and pay my bill with four other phones.
I am really hating the Driod X with all the flaws and inconsistency..I miss my Blackberry.

ridgey115 wrote:
I was having the same problem with my X right out of the box. Using a Motorola T505 handsfree device. Turns out that it acts exactly as you describe if the screen lock security is enabled. Once I disabled that, it worked fine. It does take a few seconds for the voice prompts to activate, but other than that it works. Not sure if you use the extra screen lock security, but if you do, you may want to disable it.
Its been so long that I thought about that issue but that is correct, when the device is locked using the password or swipe feature it does restrict the voice dialed from activating from bluetooth...

Bluetooth not working correctly after iOS 4 update

I recently purchased and have been enjoying the Bose sound link wireless music system in fact I can't say enough about the accessory connecting wirelessly my iPad and iPhone to enjoy music. After the iOS 4 update my iPhone will no longer connect to the bose system while my iPad has no trouble.
Anyone else experiencing similar Bluetooth issues?
Tom

I also have an issue after 4.0 update today.
Can't discover any bluetooth devices from my 3GS iPhone. It "spins the wheel" searching but never finds any.
Bluetooth pairing from a Macbook Pro 17 / 10.6.4 results in a passkey being sent to the iPhone but the pairing hangs and there is no connection to the phone.
So the bluetooth kind of works. .the hardware is functiong (and was fine under 3.1.3).
This suggests it may be the new iOS4.0 with a few glitches

Rotation does not work correct after last update iOS 8

EVerything on the screen rotates with the Ipad except the icons of all my one hundred apps. After opening any app its content rotates, but after closing the icon of the app still has the wrong position. is this a bug And how I can fix it?

Hybrid Son Of Oxayotl wrote:
I may be a bit late, but I had the same problem. It seems to come from a faulty .desktop somewhere on your machine. Just try to remove parts of ~/.cache/docky/docky.desktop.???.cache (??? depends on your locale), until you find the right one.
My problem was due to /usr/share/applications/brasero-nautilus.desktop including this line :
NoDisplay=true;
instead of the correct :
NoDisplay=true
(I had quite a lot of trouble to find that one !)
You are not late, you are just in time, I tried to remove the semicolon after "true" before deleting one by one all the entries, and it worked right away! Thanks!

Epson Artisan 830 does not print correctly after yesterdays printer update from Apple. Is there a work around?

Yesterday 9/11/13, Apple presented me an update to my printer software for my Artisan 835. Now it on

See this thread: https://discussions.apple.com/thread/5233149

Shuffle does not work correctly as of new update

iTunes gets 'stuck' on a single artist. I just forwarded through 20+ tracks from a single artist out of a library of hundreds, on "shuffle", played from an ipod.
The "preferences" setting is at the extreme "less likely" (to hear repeated artists), and my entire library is being shuffled, so this is nothing but a bug.
Is there a web address to report bugs? It's VERY difficult to locate from the apple website, which seems to want to steer everyone away from electronic contact data and towards archaic phone lines.

A Google of "iTunes bug report" turns up the following link:
http://www.apple.com/feedback/itunesapp.html

My camera does not work after I restored the system, how can I use it again?

My camera does not work after I restored the system, how can I use it again?
Thank you for your help!

Did try to restore "as new device" without using the backup after that?
Did you try to reset the phone by holding the sleep and home button until the Apple logo coes back again?

HT4623 After the iOS 7 update my camera does not operate correctly. It will take about 5 photos then it becomes very sensitive, moving between "video & square". I turn it off & back on, it work for a second or two & lockout again.

After updating my iPad my camera does not operate correctly. It will take about 5 photos then lockup. It also becomes very sensitive when I try to zoom in, it changes to "video or square". I have to turn off for awhile then it repeats the same malfunction, just lockup again.

After updating my iPad my camera does not operate correctly. It will take about 5 photos then lockup. It also becomes very sensitive when I try to zoom in, it changes to "video or square". I have to turn off for awhile then it repeats the same malfunction, just lockup again.

Ps CC 2014 is not working correctly after mac update to Yosemite 10.10.1. Select does not protect unselected areas. Magic eraser erases unselected ares.

Ps CC 2014 is not working correctly after mac update to Yosemite 10.10.1. Select does not protect unselected areas. Magic eraser erases unselected ares.

Yes my particular issue is not like yours. However, there have been many other laptop users experiencing similar problem to yours after 3.10 kernel. Mostly it seems to be bumblebee users that experience your problem with the blank screen. We do know that nvidia have yet to make their official drivers work with kernel 3.10 and up. The drivers in the Arch repository have been patched to work with 3.10. From what I have seen, this also only seem to be affecting laptops with newer nvidia gpu's. I fear there is not much to do with this problem until nvidia give official 3.10 kernel support.
My suggestion would be to stick with 3.9.9 kernel and the drivers that work with it, and don't upgrade those packages until nvidia has addressed these issues. If you have a look at the nvidia forums you will see quite a number of topics mentioning black screen when starting x on 3.10 kernel, and also a thread for the system dying. Reading some of the threads there may help you keep up to date on whether or not the issue seem to be solved.
https://devtalk.nvidia.com/default/board/98/

After uptade to ios5 my camera does not work

after uptade to ios5 my camera does not work

I have the same issue. I upgraded to ios5 then the camera was frozen and no longer works. I took it into an Apple store and they said I had some hardware damage that look to be consistent with moisture getting in through the headphone jack. I accepted that answer and went on my way since my warranty was over 100 days past and I did not feel like paying $100 for a repair with the 4s upgrade avaible with my account soon. I started to look at some other apps that use the camera, the Facebook photo share in the FB app, the amazon bar code scan, camera+ and they all work. There is definitely some kind of software bug with ios5, based on my experience, that freezes the camera. I would suggest taking it into apple to have it looked at or just using a camera app like camera+ to take pictures.

After "upgrading" from trial to FCPX 10.0.3 multi cam does not work

After "upgrading" from trial to FCPX 10.0.3, multi cam does not work anymore. Everything was fine in the trial version, but now the multicam clip I made in trail is shown, but not with the 4 windows, only the first angle can be seen. And I can not find (import) the cuts I made in the trail. The settings are the same in both versions. Am I missing something? Is it possible that I have to start from scratch and all work is lost?
When I double click the multi cam clip I see all four angles in the timeline, one underneath the other...
Any help is appreciated! Thanks!

There is an excellent podcast tutorial series called "Creative COW Final Cut Help Tutorials Podcast (SD)"
in the iTunes Store.
The latest three are video podcasts and go into great depth concerning the new Multicam in 10.0.3
Can't recommend them enough.

Issue with Apple Camera VendorID_0x106B ProductID_0x1570 green light blinks continually...camera does not work in photo booth or face time

Green light blinks continually...camera does not work in photo booth or face time.Any suggestions?

Hi Rogerya,
Thanks for using the Apple Support Communities. It sounds like you may be experiencing issues with the built-in FaceTime camera (also known as iSight) on your MacBook Air. The following resource provides relevant troubleshooting information that you can try:
How to Troubleshoot iSight - Apple Support
https://support.apple.com/en-us/HT2090
Important: Follow these instructions in order. Test the camera between steps to see if the issue is resolved.
Built-in iSight cameras
These steps are for iSight cameras that are built into a computer, such as the iMac G5 (iSight) or later, the MacBook, or MacBook Pro.
1. See if the issue is application-specific.
Try another application (iSight works with applications like iChat, PhotoBooth, and iMovie HD 6) to see if the iSight camera exhibits the same behavior in all applications. If it only happens in one application, try reinstalling that application.
2. See if the issue is user-specific.
Test your iSight camera in another user account. If the issue only occurs in one user, the issue would be isolated to user settings.
3. Find out if the computer recognizes the iSight
Check System Profiler (in the Utilities folder, inside the Applications folder). Under the USB header, check to see if the iSight camera is detected.
4. Reset SMC or PMU
Reset your computer's SMC or PMU, and then check System Profiler again. (SMC reset instructions for iMac G5 (iSight), Intel-based iMacs; PMU reset instructions for MacBook and MacBook Pro.)
If your built-in iSight camera is still not behaving correctly after trying all these steps, you may need to contact Apple or an Apple-Authorized Service Provider for service.
- Matt M.

Camera does not work correctly after op system update

Similar Messages

Maybe you are looking for